D. Jia

发表

Electrospinning of pure polymer-derived SiBCN nanofibers with high yield

Zhihua Yang, Yu Zhou, Qingqing Chen, 2021 .

Polymer-Derived Lightweight SiBCN Ceramic Nanofibers with High Microwave Absorption Performance.

Zhihua Yang, Yu Zhou, Qingqing Chen, 2021, ACS applied materials & interfaces.

A fractal-patterned coating on titanium alloy for stable passive heat dissipation and robust superhydrophobicity

Yu Zhou, D. Jia, Guoliang Chen, 2019, Chemical Engineering Journal.

Processing liquid-feed flame spray pyrolysis synthesized Mg0.5Ce0.2Zr1.8(PO4)3 nanopowders to free standing thin films and pellets as potential electrolytes in all-solid-state Mg batteries

Yu Zhou, D. Jia, B. Liang, 2018 .

O-, N-Coordinated single Mn atoms accelerating polysulfides transformation in lithium-sulfur batteries

Yu Zhou, X. Duan, D. Jia, 2021 .

Nitrogen doped and hierarchically porous carbons derived from chitosan hydrogel via rapid microwave carbonization for high-performance supercapacitors

Yu Zhou, D. Jia, Yaming Wang, 2017 .

High voltage asymmetric supercapacitor based on MnO2 and graphene electrodes

Lixin Guo, Yaming Wang, Yu Zhou, 2013 .

Effects of morphotropic phase boundary on the electric behavior of Er/Ti co-doped BiFeO3 ceramics

G. Zeng, Yu Zhou, Fangzhe Li, 2019, Scripta Materialia.

Electric/magnetic behaviors of Nd/Ti co-doped BiFeO3 ceramics with morphotropic phase boundary

Yu Zhou, Fangzhe Li, D. Jia, 2019, Scripta Materialia.

Ablation behavior and mechanism of boron nitride - magnesium aluminum silicate ceramic composites in an oxyacetylene combustion flame

Zhihua Yang, Yu Zhou, X. Duan, 2018 .

Degradation and structure evolution in corrosive LiOH solution of microarc oxidation coated Zircaloy-4 alloy in silicate and phosphate electrolytes

D. Jia, J. Ouyang, Y. Xing, 2018 .

Direct ink writing of continuous SiO2 fiber reinforced wave-transparent ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2020, Journal of Advanced Ceramics.

Gradient Structural Bone-Like Apatite Induced by Chitosan Hydrogel via Ion Assembly

Yu Zhou, D. Jia, Baoqiang Li, 2011, Journal of biomaterials science. Polymer edition.

3D Printing Graphene Oxide Soft Robotics.

P. Poulin, Yu Zhou, Jing Zhong, 2022, ACS nano.

Kirigami-Inspired Highly Stretchable Nanoscale Devices Using Multidimensional Deformation of Monolayer MoS2

Wei Zheng, Bin Yang, Feng Gao, 2018, Chemistry of Materials.

Electrical properties of new oxides (Ca0.85-xYxOH)1.16CoO2 synthesized by hydrothermal process

D. Jia, Gang Chen, Jingxue Sun, 2013 .

Antioxidation and thermoelectric properties of ZnO nanoparticles-coated β-FeSi2

Weiqi Wang, Zhihua Yang, X. Duan, 2011 .

Crooked Ag2Te nanowires with rough surfaces: facile microwave-assisted solution synthesis, growth mechanism, and electrical performances

D. Jia, Gang Chen, Jingxue Sun, 2014 .

Enhanced ferroelectric and energy-storage properties of Nb-doped 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 ceramics prepared by a multi-ionic sol-gel method

Yu Zhou, Fangzhe Li, D. Jia, 2019, Physica B: Condensed Matter.

Constructing dual ionically cross-linked poly(acrylamide-co-acrylic acid) /chitosan hydrogel materials embedded with chitosan decorated halloysite nanotubes for exceptional mechanical performance

Yu Zhou, D. Jia, Baoqiang Li, 2020 .

Mechanical and dielectric properties of direct ink writing Si2N2O composites

Zhihua Yang, Yu Zhou, D. Jia, 2020, Journal of the European Ceramic Society.

Direct ink writing of Si2N2O porous ceramic strengthened by directional β-Si3N4 grains

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Mechanical and dielectric properties of 3D printed highly porous ceramics fabricated via stable and durable gel ink

Zhihua Yang, Yu Zhou, Jing Zhong, 2019 .

Hydrosoluble, UV-crosslinkable and injectable chitosan for patterned cell-laden microgel and rapid transdermal curing hydrogel in vivo.

U. Demirci, Yu Zhou, D. Jia, 2015, Acta biomaterialia.

Porous geopolymer composites: A review

Xiaodong Wang, Y. Qiao, D. Jia, 2021, Composites Part A: Applied Science and Manufacturing.

Flexible and solid-state asymmetric supercapacitor based on ternary graphene/MnO2/carbon black hybrid film with high power performance

Yu Zhou, D. Jia, Yaming Wang, 2015 .

Cyclic thermal shock resistance of h-BN composite ceramics with La2O3–Al2O3–SiO2 addition

Yu Zhou, X. Duan, D. Jia, 2021 .

Corrosion evaluation of microarc oxidation coatings formed on 2024 aluminium alloy

Yu Zhou, D. Jia, Yaming Wang, 2010 .

Hydrothermal transformation of geopolymers to bulk zeolite structures for efficient hazardous elements adsorption.

Yu Zhou, D. Jia, P. He, 2021, The Science of the total environment.

A facile bioinspired strategy for accelerating water collection enabled by passive radiative cooling and wettability engineering

Yu Zhou, D. Jia, Guoliang Chen, 2021 .

Research on the Densification Process of the Mechanically-Alloyed Amorphous 2Si-B-3C-N Powder

D. Jia, Bin Yang, Peng Zhang, 2018, Solid State Phenomena.

A Mechanically-Alloyed Amorphous 2Si-B-3C-N Ceramic with a Crystallization Temperature up to 1800°C

D. Jia, Bin Yang, Peng Zhang, 2018, Solid State Phenomena.

pH-responsive UV crosslinkable chitosan hydrogel via "thiol-ene" click chemistry for active modulating opposite drug release behaviors.

Yu Zhou, D. Jia, Baoqiang Li, 2021, Carbohydrate polymers.

Ultraviolet-Crosslinkable and Injectable Chitosan/Hydroxyapatite Hybrid Hydrogel for Critical Size Calvarial Defect Repair In Vivo

Yu Zhou, D. Jia, Baoqiang Li, 2015 .

Fabrication and Characterization of In Situ Porous Si3N4‐Si2N2O‐BN Ceramic

Zhihua Yang, Yu Zhou, X. Duan, 2014 .

Effect of starting PMMA content on microstructure and properties of gel casting BN/Si3N4 ceramics with spherical-shaped pore structures

Zhihua Yang, Yu Zhou, X. Duan, 2013, Journal of Materials Science.

Biosensor Based on Chitosan Nanocomposite

Yu Zhou, D. Jia, Baoqiang Li, 2015 .

High voltage resistance ceramic coating fabricated on titanium alloy for insulation shielding application

Yu Zhou, D. Jia, Guoliang Chen, 2019, Ceramics International.

Nanosized Ce 0.8 Sm 0.2 O 1.9 infiltrated GdBaCo 2 O 5Dd cathodes for intermediate-temperature solid oxide fuel cells

Yaohui Zhang, D. Jia, Xiqiang Huang, 2011 .

BCl3 modified tris(dichloromethylsilylethyl)borane as a precursor for SiBCN ceramics applied in lithium-ion battery anodes

Zhihua Yang, Yu Zhou, Qingqing Chen, 2021 .

Fabrication and in vitro characterization of magnetic hydroxycarbonate apatite coatings with hierarchically porous structures.

Yu Zhou, D. Jia, Yaping Guo, 2008, Acta biomaterialia.

Crystallization behavior and mechanical properties of high open porosity dolomite hollow microspheres filled hybrid geopolymer foams

Jinlong Yang, Shu Yan, D. Jia, 2019, Cement and Concrete Composites.

Si-B-C-N monoliths with LaB6-induced well-developed BN(C) flakes

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Dense, pure SiC monoliths with excellent oxidation resistance sintered at low temperatures and high pressures

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Microstructures, mechanical properties and oxidation resistance of SiBCN ceramics with the addition of MgO, ZrO2 and SiO2 (MZS) as sintering additives

Zhihua Yang, X. Duan, D. Jia, 2015 .

Effect of curing temperature and SiO2/K2O molar ratio on the performance of metakaolin-based geopolymers

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Influence of calcination temperature of kaolin on the structure and properties of final geopolymer

Meirong Wang, D. Jia, Y. Zhou, 2010 .

Mechanical and thermal physical properties of amorphous SiCN(O) ceramic bulks prepared by hot-press sintering

Zhihua Yang, X. Duan, D. Jia, 2012 .

Facile synthesis, microstructure and photophysical properties of core-shell nanostructured (SiCN)/BN nanocomposites

Zhihua Yang, Yu Zhou, D. Jia, 2017, Scientific Reports.

Safe trapping of cesium into doping-enhanced pollucite structure by geopolymer precursor technique.

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of hazardous materials.

Oxidation Resistance of AlPO4 Bonded Ceramic Coating Formed on Titanium Alloy for High‐Temperature Applications

Yu Zhou, Yufeng Zhang, D. Jia, 2015 .

A green and low-cost hollow gangue microsphere/geopolymer adsorbent for the effective removal of heavy metals from wastewaters.

Jinlong Yang, Shu Yan, D. Jia, 2019, Journal of environmental management.

Interplay between storage temperature, medium and leaching kinetics of hazardous wastes in Metakaolin-based geopolymer.

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of hazardous materials.

Formation of SiC whiskers/leucite-based ceramic composites from low temperature hardening geopolymer

Yu Zhou, D. Jia, Song Chen, 2021, Ceramics International.

Effect of pH Values on Conversion of Calcite Crystals into Calcium Phosphate Phases in Buffer Solutions

Yu Zhou, D. Jia, Baoqiang Li, 2007 .

Influence of Sintering Aids on the Nitridation of Reaction Bonded Si3N4/BN Ceramics

D. Jia, Tiesong Lin, 2007 .

Influence factors of ball milling process on BE powder for reaction sintering of TiB/Ti–4.0Fe–7.3Mo composite

Yu Zhou, D. Jia, H. Feng, 2007 .

A novel design of single-chamber SOFC micro-stack operated in methane–oxygen mixture

Bo Wei, Mingliang Liu, Wenhui Su, 2009 .

A pinning effect for the enhanced oxidation resistance at 1600 °C of silicoboron carbonitride ceramics with the addition of MXene

Yu Zhou, D. Jia, Xingqi Liao, 2021, Corrosion Science.

Co-growing design of super-repellent dual-layer coating for multiple heat dissipation improvement

Yu Zhou, D. Jia, Guoliang Chen, 2022 .

Scalable-Manufactured Superhydrophobic Multilayer Nanocomposite Coating with Mechanochemical Robustness and High-Temperature Endurance.

Yu Zhou, D. Jia, Guoliang Chen, 2020, ACS applied materials & interfaces.

Chitosan‐induced synthesis of magnetite nanoparticles via iron ions assembly

Yu Zhou, D. Jia, Baoqiang Li, 2008 .

Polarization toughening of LiTaO3 particles dispersed Al2O3 ceramic composite

D. Jia, Yifan Li, Yiteng Liu, 2005 .

Ferroelectric domain structures in strained BiFeO3 ceramics synthesized by spark plasma sintering

Yu Zhou, Fangzhe Li, D. Jia, 2020 .

A fluorescent sensor based on a diarylethene-rhodamine derivative for sequentially detecting Cu2+ and arginine and its application in keypad lock

Yu Zhou, D. Jia, Baoqiang Li, 2017 .

Effects of treatment temperature on the reduction of GO under alkaline solution during the preparation of graphene/geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

ZnO @ N-doped porous carbon/Co 3 ZnC core–shell heterostructures with enhanced electromagnetic wave attenuation ability

Yu Zhou, D. Jia, Yaming Wang, 2018, Chemical Engineering Journal.

Highly Dense Amorphous Si2BC3N Monoliths with Excellent Mechanical Properties Prepared by High Pressure Sintering

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Electron beam “ballooned” carbon sphere derived from graphene oxide by a hydrazine assisted hydrothermal method

P. Xiao, Yu Zhou, D. Jia, 2014 .

Effect of reduced graphene oxide content on the microstructure and mechanical properties of graphene–geopolymer nanocomposites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Thermoelectric properties and electronic structure of Al-doped ZnO

Weiqi Wang, D. Jia, Shuchen Lv, 2011 .

Preparation and Thermoelectric Properties of Al2O3-Doped ZnO Ceramics

D. Jia, Xiu-rong Qu, 2008 .

Nanosized Ce0.8Sm0.2O1.9 infiltrated GdBaCo2O5+δ cathodes for intermediate-temperature solid oxide fuel cells

Yaohui Zhang, D. Jia, Z. Lü, 2011 .

Electrochemical properties of La0.8Sr0.2FeO3-δ based composite cathode for intermediate temperature SOFC

D. Jia, Naiqing Zhang, Derui Zhou, 2006 .

Preparation and mechanical performance of ductile Csf/Al2O3–BN composites—Part 2: Effects of fiber contents and ablation properties

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Preparation and mechanical performance of ductile Csf/Al2O3-BN composites, Part 1: Effects of fiber length and sintering temperature

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Mineralization of Chitosan via Alternate Soaking

Yu Zhou, D. Jia, Baoqiang Li, 2007 .

Microwave absorbing property optimization of starlike ZnO/reduced graphene oxide doped by ZnO nanocrystal composites.

Yu Zhou, D. Jia, Yaming Wang, 2017, Physical chemistry chemical physics : PCCP.

Reduced graphene oxide decorated with in-situ growing ZnO nanocrystals: Facile synthesis and enhanced microwave absorption properties

Yu Zhou, D. Jia, Yaming Wang, 2016 .

Electronic structure and optical properties of Sn-doped ZnO

D. Jia, Shuchen Lü, Xiu-rong Qu, 2012 .

Synthesis of octahedral ZnO mesoscale superstructures via thermal decomposing octahedral zinc hydroxide precursors

D. Jia, Xiu-rong Qu, 2009 .

Bi-fluctuation in Na0.5Bi0.5TiO3 ferroelectric ceramics with abnormal relaxor behaviour

Yu Zhou, Fangzhe Li, D. Jia, 2019, Philosophical Magazine.

Texture and anisotropy of hot-pressed h-BN matrix composite ceramics with in situ formed YAG

Yu Zhou, D. Jia, Delong Cai, 2021, Journal of Advanced Ceramics.

Microstructure evolution and grain growth mechanisms of h-BN ceramics during hot-pressing

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of the European Ceramic Society.

Microstructural evolution and mechanical properties of h-BN composite ceramics with Y2O3–AlN addition by liquid-phase sintering

Yu Zhou, X. Duan, D. Jia, 2019, Rare Metals.

Anisotropic properties of textured h-BN matrix ceramics prepared using 3Y2O3-5Al2O3(-4MgO) as sintering additives

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of the European Ceramic Society.

Inhibiting crystallization mechanism of h-BN on α-cordierite in BN-MAS composites

Zhihua Yang, Yu Zhou, X. Duan, 2016 .

Review on the properties of hexagonal boron nitride matrix composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2016 .

Influence of hot-press sintering parameters on microstructures and mechanical properties of h-BN ceramics

Zhihua Yang, Z. Wang, Yu Zhou, 2016 .

A novel BN–MAS system composite ceramics with greatly improved mechanical properties prepared by low temperature hot-pressing

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

In-situ preparation of fully stabilized graphene/cubic-leucite composite through graphene oxide/geopolymer

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Effect of heat treatment temperature on microstructure and electrochemical properties of hollow carbon spheres prepared in high-pressure argon

Pengjian Zuo, D. Jia, Y. Shao, 2011 .

Effects of mesoporous structure and UV irradiation on in vitro bioactivity of titania coatings

Yu Zhou, D. Jia, Haixiong Tang, 2010 .

High bone-like apatite-forming ability of mesoporous titania films

Yu Zhou, D. Jia, Haixiong Tang, 2010 .

Effects of graphene oxide on the geopolymerization mechanism determined by quenching the reaction at intermediate states

Zhihua Yang, Yu Zhou, Shu Yan, 2017 .

Metal organic framework-derived CoZn alloy/N-doped porous carbon nanocomposites: tunable surface area and electromagnetic wave absorption properties

Yu Zhou, D. Jia, Yaming Wang, 2018 .

Structure evolution, amorphization and nucleation studies of carbon-lean to -rich SiBCN powder blends prepared by mechanical alloying

Zhihua Yang, Yu Zhou, X. Duan, 2016 .

Improvement of cycle performance for silicon/carbon composite used as anode for lithium ion batteries

Pengjian Zuo, G. Yin, C. Du, 2009 .

Effects of gas pressure and temperature on the synthesis of hollow carbon spheres in argon atmosphere

D. Jia, J. Rao, Y. Shao, 2009 .

Engineering the Optoelectronic Properties of 2D Hexagonal Boron Nitride Monolayer Films by Sulfur Substitutional Doping.

Yu Zhou, D. Jia, P. Hu, 2022, ACS applied materials & interfaces.

Immobilization behavior of Sr in geopolymer and its ceramic product

Zhihua Yang, Yu Zhou, D. Jia, 2019, Journal of the American Ceramic Society.

Effect of fiber content on the microstructure and mechanical properties of carbon fiber felt reinforced geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Rapid and high yield synthesis of carbon dots with chelating ability derived from acrylamide/chitosan for selective detection of ferrous ions

Guanxiong Liu, Yu Zhou, D. Jia, 2019, Applied Surface Science.

Carbon Dots with Tailor-Made Chelating Ligands for Specific Metal Ions Recognition: Target Synthesis and Prediction of Metal Ions Selectivity

Guanxiong Liu, Yu Zhou, D. Jia, 2022, SSRN Electronic Journal.

New generation of chitosan-(acrylic acid)-magnetite nanospheres: synthesis, characterization and cell viability test in vitro.

Yu Zhou, D. Jia, Baoqiang Li, 2011, Journal of controlled release : official journal of the Controlled Release Society.

A novel method for preparation of hollow and solid carbon spheres

D. Jia, J. Rao, Y. Shao, 2008 .

Improved mechanical properties and directional heat transfer performance of h-BN matrix multilayer composites with alternately stacked untextured/textured layers

Yu Zhou, D. Jia, Delong Cai, 2022, Ceramics International.

On the formation mechanisms and properties of MAX phases: A review

Yu Zhou, S. van der Zwaag, D. Jia, 2021, Journal of the European Ceramic Society.

Effect of ball milling treatment on the microstructures and properties of Cr2AlC powders and hot pressed bulk ceramics

Yu Zhou, X. Duan, D. Jia, 2019 .

Chitosan Hemostatic Dressing

Shuqi Wang, Yu Zhou, D. Jia, 2015 .

Microarc oxidation coated magnesium alloy radiator for light emitting diode: Microstructure, thermal radiative and dissipating property

D. Jia, Yaming Wang, Yongchun Zou, 2016 .

Enhanced mechanical properties, thermal shock resistance and ablation resistance of Si2BC3N ceramics with nano ZrB2 addition

Zhihua Yang, Yu Zhou, D. Jia, 2019, Journal of the European Ceramic Society.

Superhydrophobic double-layer coating for efficient heat dissipation and corrosion protection

Yu Zhou, D. Jia, Yaming Wang, 2019, Chemical Engineering Journal.

Synthesis of novel low-cost porous gangue microsphere/geopolymer composites and their adsorption properties for dyes

Jinlong Yang, Yong Huang, Shu Yan, 2018, International Journal of Applied Ceramic Technology.

Electrochemical investigation of silicon/carbon composite as anode material for lithium ion batteries

Pengjian Zuo, G. Yin, C. Du, 2008 .

Improved electrochemical performance of SrCo0.8Fe0.2O3−δ–La0.45Ce0.55O2−δ composite cathodes for IT-SOFC

Xingbao Zhu, D. Jia, Xiaodong Zhu, 2007 .

N‐Doped sp2/sp3 Carbon Derived from Carbon Dots to Boost the Performance of Ruthenium for Efficient Hydrogen Evolution Reaction

Yu Zhou, D. Jia, Caicai Li, 2022, Small methods.

Geopolymerization Mechanism of Geopolymers

Meirong Wang, D. Jia, P. He, 2020 .

Preparation and in vitro characterization of crack-free mesoporous titania films

Yu Zhou, D. Jia, Haixiong Tang, 2011 .

Anisotropic mechanical properties and fracture mechanisms of textured h-BN composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2014 .

Effect of sintering pressure on the texture of hot-press sintered hexagonal boron nitride composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

Microstructural evolution of amorphous Si2BC3N nanopowders upon heating at high temperatures: High pressures reverse the nucleation order of SiC and BN(C)

F. Tian, Zhihua Yang, Xiaoyun Li, 2018 .

Two dielectric anomalies and impedances of the x CoFe2O4 - (1-x) Bi3.15Nd0.85Ti3O12 (x = 0, 0.3, 0.5) ceramics with coherent interfaces

G. Zeng, Yu Zhou, D. Jia, 2017 .

Ferroelectric properties of magnetoelectric CoFe2O4/Bi3.15Nd0.85Ti3O12 composite ceramics with coherent-lattice interfaces

Yu Zhou, D. Jia, Wen Wang, 2017 .

Crystallization process of lanthanum-substituted bismuth titanate synthesized by a facile sol–gel method

Yu Zhou, D. Jia, Wen Wang, 2010 .

Diffusion bonding of ZrB2–SiC and Nb using dynamic compressed Ni foam interlayer

D. Jia, P. He, Tiesong Lin, 2013 .

The effects of holding time on grain size, orientation degree and properties of h-BN matrix textured ceramics

X. Duan, D. Jia, Shanghua Wu, 2020 .

A novel method for preparation of hollow carbon spheres under a gas pressure atmosphere

D. Jia, J. Rao, B. Liu, 2007 .

Rapid synthesis of Ag2Se dendrites with enhanced electrical performance by microwave-assisted solution method

D. Jia, Gang Chen, Rencheng Jin, 2013 .

Ni(PO3)2/CNTs hybrid architecture via phthalocyanine modulated self-assemblies for efficient hydrogen evolution reaction

Yu Zhou, D. Jia, Qingfeng Sun, 2022, Applied Surface Science.

Synthesis and structural evolution of dual-boron-source-modified polysilazane derived SiBCN ceramics

Zhihua Yang, Yu Zhou, Qingqing Chen, 2016 .

Boron‐dependent microstructural evolution, thermal stability, and crystallization of mechanical alloying derived SiBCN

Zhihua Yang, Yu Zhou, Qingqing Chen, 2018 .

Decoupled pH‐ and Thermo‐Responsive Injectable Chitosan/PNIPAM Hydrogel via Thiol‐Ene Click Chemistry for Potential Applications in Tissue Engineering

Yu Zhou, D. Jia, Baoqiang Li, 2020, Advanced healthcare materials.

Growth Mechanism and Optical Property of a Novel ZnO Mesoscale Superstructure

D. Jia, Xiu-rong Qu, 2010 .

A facile approach to construct BiOI/Bi5O7I composites with heterostructures: efficient charge separation and enhanced photocatalytic activity

D. Jia, Chade Lv, Gang Chen, 2015 .

Synthesis of hollow six-armed carbon particles by a self-assembly template method

D. Jia, J. Rao, Y. Shao, 2008 .

Evaluation on the Microstructure and Thermal Infrared Emissivity of Calcium-Doped Ytterbium Chromate Coating Deposited by Saucer-Shaped Porous Feedstocks for High-Temperature Thermal Protection

Yu Zhou, D. Jia, Guoliang Chen, 2022, SSRN Electronic Journal.

Effects of spark plasma sintering on ferroelectricity of 0.8Bi3.15Nd0.85Ti3O12-0.2CoFe2O4 composite ceramic

Bin Yang, Yu Zhou, D. Jia, 2018 .

Reducing high-temperature dielectric loss of h-BN ceramics by orienting grains

Zhihua Yang, Yu Zhou, D. Jia, 2023, Scripta Materialia.

Synthesis mechanism of amorphous Si 2 BC 3 N powders: Structural evolution of 2Si‐BN‐3C mixtures during mechanical alloying

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Preparation, microstructure, and thermophysical properties of Cr3+-modified cordierite high emissivity ceramic for metal thermal protection

Yu Zhou, D. Jia, Guoliang Chen, 2022, Journal of Alloys and Compounds.

Hollow graphene spheres self-assembled from graphene oxide sheets by a one-step hydrothermal process

P. Xiao, Yu Zhou, D. Jia, 2013 .

The hydrothermal treated Zn-incorporated titania based microarc oxidation coating: Surface characteristics, apatite-inducing ability and antibacterial ability

Yu Zhou, D. Jia, Yaming Wang, 2018, Surface and Coatings Technology.

Effects of Zr and chopped C fiber on microstructure and mechanical properties of SiBCN ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2020, Science China Technological Sciences.

Effect of sintering temperature on microstructure and mechanical properties of boron nitride whisker reinforced fused silica composites

Zhihua Yang, Yu Zhou, D. Jia, 2020, Ceramics International.

Particles-Reinforced Geopolymer Matrix Composites

Meirong Wang, D. Jia, P. He, 2020 .

Geopolymer and Geopolymer Matrix Composites

Meirong Wang, D. Jia, P. He, 2020 .

Effects of graphite on the mechanical and microwave absorption properties of geopolymer based composites

Yu Zhou, D. Jia, Jingkun Yuan, 2017 .

Effects of pore size on microstructure, mechanical and dielectric properties of gel casting BN/Si3N4 ceramics with spherical-shaped pore structures

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

Microarc oxidation coating covered Ti implants with micro-scale gouges formed by a multi-step treatment for improving osseointegration.

Yu Zhou, D. Jia, Yaming Wang, 2017, Materials science & engineering. C, Materials for biological applications.

MC3T3-E1 cells' response and osseointegration of bioactive sphene-titanium oxide composite coatings fabricated by a hybrid technique of microarc oxidation and heat treatment on titanium.

Yu Zhou, D. Jia, Yaming Wang, 2014, Journal of materials chemistry. B.

Microstructure and mechanical properties of Al2O3 particle reinforced LiTaO3 piezoelectric ceramic matrix composites

Yu Zhou, D. Jia, Youfeng Zhang, 2007 .

Sol–gel synthesis of Bi3.25La0.75Ti3O12 nanotubes

Yu Zhou, D. Jia, Wen Wang, 2011 .

Electrophoretic sol–gel synthesis of SrBi2Ta2O9 nanowires

Yu Zhou, D. Jia, Wen Wang, 2010 .

Synthesis and characterization of ferroelectric SrBi2Ta2O9 nanotubes arrays

Yu Zhou, D. Jia, Wen Wang, 2009 .

Ablation mechanism and properties of SiCf/SiBCN ceramic composites under an oxyacetylene torch environment

Zhihua Yang, Yu Zhou, X. Duan, 2014 .

H2Ti5O11·H2O nanorod arrays formed on a Ti surface via a hybrid technique of microarc oxidation and chemical treatment

Yu Zhou, D. Jia, Yaming Wang, 2015 .

Crystallisation process of Bi5Ti3FeO15 multiferroic nanoparticles synthesised by a sol–gel method

Yu Zhou, D. Jia, Wen Wang, 2017, Journal of Sol-Gel Science and Technology.

Crystallization kinetics and microstructure evolution of reduced graphene oxide/geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

In Situ Processing of Graphene/Leucite Nanocomposite Through Graphene Oxide/Geopolymer

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Magnetic Chitosan/Hydroxyapatite Nanocomposite via In Situ Hybridization Strategy

Yu Zhou, D. Jia, Baoqiang Li, 2007 .

Effects of O2 and N2 sintering atmospheres on electric properties of 0.9SrTiO3–0.1NiFe2O4 composite ceramics

Bin Yang, Yu Zhou, Fangzhe Li, 2019, Physica B: Condensed Matter.

A self-assembly template approach for preparing hollow carbon microspheres

Pengjian Zuo, D. Jia, J. Rao, 2009 .

Effects of high pressure on the low-temperature sintering of dense amorphous SiBCN monoliths

Zhihua Yang, Yu Zhou, D. Jia, 2018, Journal of the European Ceramic Society.

Microstructural features and properties of the nano-crystalline SiC/BN(C) composite ceramic prepared from the mechanically alloyed SiBCN powder

Zhihua Yang, Yu Zhou, X. Duan, 2012 .

Microstructure and valence bonds of Si-B-C-N-Al powders synthesized by mechanical alloying

Zhihua Yang, Yu Zhou, D. Jia, 2012 .

Thermal Evolution of Geopolymer in the Process of High-Temperature Treatment

D. Jia, Jingkun Yuan, P. He, 2020, Geopolymers and Other Geosynthetics.

Effects of Na+ substitution Cs+ on the microstructure and thermal expansion behavior of ceramic derived from geopolymer

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Role of boron addition on phase composition, microstructural evolution and mechanical properties of nanocrystalline SiBCN monoliths

Y. G. Liu, Zhihua Yang, Yu Zhou, 2017 .

Improved toughness of ZrB2–SiC composites with nanopowders obtained by mechanical alloying

Zhihua Yang, D. Jia, Yawei Li, 2020 .

Strengthening and toughening effects of MWCNTs on Si2BC3N ceramics sintered by SPS technique

Zhihua Yang, Yu Zhou, D. Jia, 2018 .

Densification, microstructural evolution and mechanical properties of Si-B-C-N monoliths with LaB6 addition

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Microstructure and thermal stability of amorphous SiBCNAl powders fabricated by mechanical alloying

D. Jia, Pengfei Zhang, Zhi-hua Yang, 2010 .

Microstructure and thermal stabilities in various atmospheres of SiB0.5C1.5N0.5 nano-sized powders fabricated by mechanical alloying technique

Zhihua Yang, Yu Zhou, X. Duan, 2010 .

Microstructures and properties of SiB0.5C1.5N0.5 ceramics consolidated by mechanical alloying and hot pressing

Zhihua Yang, Yu Zhou, D. Jia, 2008 .

Fabrication and characterization of amorphous SiBCN powders

Zhihua Yang, Yu Zhou, D. Jia, 2007 .

Si3N4 ceramics with embedded microchannel structures fabricated by high-precision additive manufacturing based on computational fluid dynamics simulations

Zhihua Yang, D. Jia, Delong Cai, 2022, Additive Manufacturing.

Ultrafine SnO2 nanoparticles on delaminated MXene nanosheets as an anode for lithium-ion batteries

J. Zhang, D. Jia, Xiaoxiao Huang, 2022, Journal of Alloys and Compounds.

Synthesis of high-purity, isotropic or textured Cr2AlC bulk ceramics by spark plasma sintering of pressure-less sintered powders

S. Zwaag, Yu Zhou, X. Duan, 2015 .

Concepts for Energy Absorption and Dissipation in Ceramic Armor

Jonathan L. Bell, D. Jia, Dong-Kyu Kim, 2009 .

Continuous Fibers-Reinforced Geopolymer Matrix Composites

Meirong Wang, D. Jia, P. He, 2020 .

Thermal evolution of lithium ion substituted cesium-based geopolymer under high temperature treatment, Part I: Effects of holding temperature

Zhihua Yang, Yu Zhou, X. Duan, 2018, Ceramics International.

Novel geopolymer based composites reinforced with stainless steel mesh and chromium powder

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

In situ processing of MWCNTs/leucite composites through geopolymer precursor

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

The Effect of Si/Al on Mechanical Properties and Fracture Behavior of Stainless Steel Mesh/Crp Reinforced Geopolymer Composites

D. Jia, Jingkun Yuan, P. He, 2017 .

Effects of Li Substitution on the Microstructure and Thermal Expansion Behavior of Pollucite Derived from Geopolymer

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Preparation of fully stabilized cubic-leucite composite through heat-treating Cs-substituted K-geopolymer composite at high temperatures

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Microstructure and integrity of leucite ceramic derived from potassium-based geopolymer precursor

D. Jia, Shengjin Wang, P. He, 2013 .

Interface evolution of the Cf/leucite composites derived from Cf/geopolymer composites

D. Jia, P. He, 2013 .

Low-temperature sintered pollucite ceramic from geopolymer precursor using synthetic metakaolin

D. Jia, P. He, 2013, Journal of Materials Science.

Effect of High-Temperature Heat Treatment on Mechanical Property of Cr-Geopolymer Composite

Yu Zhou, Meirong Wang, D. Jia, 2011 .

Thermal evolution and crystallization kinetics of potassium-based geopolymer

Yu Zhou, Meirong Wang, D. Jia, 2011 .

Thermal-mechanical properties of short carbon fiber reinforced geopolymer matrix composites subjected to thermal load

Meirong Wang, D. Jia, Tiesong Lin, 2009 .

Low-temperature synthesis of BiFeO3 nanopowders via a sol–gel method

Yu Zhou, D. Jia, Wen Wang, 2009 .

Microstructure and thermal shock behavior of sol–gel introduced ZrB2 reinforced SiBCN matrix

Zhihua Yang, Yu Zhou, D. Jia, 2018, Journal of Sol-Gel Science and Technology.

The fabrication and hydrophobic property of micro-nano patterned surface on magnesium alloy using combined sparking sculpture and etching route

Yu Zhou, D. Jia, Yaming Wang, 2016 .

Domain structures in hot-press sintered SrBi2Ta1.6Nb0.4O9 and SrBi2Ta2O9 ferroelectric ceramics

Yu Zhou, D. Jia, Wen Wang, 2012 .

Microstructure and Ferroelectric Domains of SrBi2Ta1.6Nb0.4O9

Yu Zhou, D. Jia, Wen Wang, 2007 .

Fabrication and Properties of SrBi2(Ta1-xNbx)2O9 Ferroelectric Ceramics

Yu Zhou, D. Jia, Haijun Niu, 2007 .

Ferroelectric Phase Transition Investigated by Thermal Analysis and Raman Scattering in SrBi2Ta2O9 Nanoparticles

Yu Zhou, D. Jia, Wen Wang, 2007 .

Preparation and properties of SrBi2.2 Ta2O9 thin film

Yu Zhou, D. Jia, Wen Wang, 2005 .

Crystallization and Nanograin Growth in SrBi2Ta2O9 Synthesized by a Novel Sol–Gel Process

D. Jia, F. Ye, Y. Zhou, 2005 .

X-Ray Diffraction and Raman Scattering Study of Sr1-xBi2+yTa2O9 Nanoparticles

Yu Zhou, D. Jia, Hua Ke, 2005 .

Synthesis and characterization of nanosized SrBi2Ta2O9 powder by a novel sol–gel process

Yu Zhou, D. Jia, Wen Wang, 2002 .

Synthesis and properties of sol–gel SBT powder and film

Wei Wang, D. Jia, F. Ye, 2002 .

Room-temperature multiferroic and magnetodielectric properties of SrTiO3/NiFe2O4 composite ceramics

Yu Zhou, D. Jia, Hua Ke, 2019, Ceramics International.

Structural evolution and electrical properties of Na0.5Bi0.5TiO3-CoFe2O4 ceramics with embedded structures

Yu Zhou, Fangzhe Li, D. Jia, 2018, Ceramics International.

Structural, dielectric, ferroelectric, and ferromagnetic properties of multiferroic ceramics (1–x)Ba(Zr0.2Ti0.8)O3-xBa0.7Ca0.3FeTaO5

Jun Li, R. Guo, A. Bhalla, 2018, Ferroelectrics.

Effect of magnetic CoFe2O4 component on sintering densification process of Bi3.15Nd0.85Ti3O12 ceramics

Yu Zhou, D. Jia, Wen Wang, 2017 .

Flexible Optical Synapses Based on In2Se3/MoS2 Heterojunctions for Artificial Vision Systems in the Near-Infrared Range.

Yu Zhou, D. Jia, P. Hu, 2022, ACS applied materials & interfaces.

Preparation and characterization of Cf/Pollucite composites through geopolymer precursors

Zhangwei Chen, C. Lao, Yu Zhou, 2021, Ceramics International.

Effects of kinds of alkali-activated ions on geopolymerization process of geopolymer cement pastes

Zhangwei Chen, C. Lao, Yu Zhou, 2021, Construction and Building Materials.

Effects of high-temperature heat treatment on the microstructure and mechanical performance of hybrid Cf-SiCf-(Al2O3p) reinforced geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2017 .

SiC fiber reinforced geopolymer composites, part 2: Continuous SiC fiber

Zhihua Yang, Yu Zhou, Pengfei Wang, 2016 .

Progress on the formation of ceramics and ceramic-based composites through geopolymer precursors

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Effect of heat treatment on microstructure evolution and mechanical properties of selective laser melted Ti–6Al–4V and TiB/Ti–6Al–4V composite: A comparative study

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

Stacking faults formation mechanism of in situ synthesized TiB whiskers

Yu Zhou, D. Jia, Q. Meng, 2006 .

Mesoporous structure and evolution mechanism of hydroxycarbonate apatite microspheres

Yu Zhou, D. Jia, Ya-Jun Guo, 2010 .

Fabrication of monodisperse mesoporous hydroxycarbonate apatite microspheres by emulsion method

Yu Zhou, D. Jia, Ya-Jun Guo, 2010 .

Fabrication of hydroxycarbonate apatite coatings with hierarchically porous structures.

Yu Zhou, D. Jia, Yaping Guo, 2008, Acta biomaterialia.

SiBCN-reduced graphene oxide (rGO) ceramic composites derived from single-source-precursor with enhanced and tunable microwave absorption performance

Zhihua Yang, Yu Zhou, Qingqing Chen, 2021, Carbon.

Mechanism of superior luminescent and high-efficiency photocatalytic properties of Eu-doped calcium aluminate by low-cost self-propagating combustion synthesis technique

Yang Zhao, Yu Zhou, D. Jia, 2017, Scientific Reports.

Spark plasma sintering and improved fracture toughness of silicoboron carbonitride ceramics with the integration of 2D MXene

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

Nonswelling injectable chitosan hydrogel via UV crosslinking induced hydrophobic effect for minimally invasive tissue engineering.

Yu Zhou, D. Jia, Baoqiang Li, 2021, Carbohydrate polymers.

Manufacturing of high volume fraction of Ti3AlC2-Ti2AlC metallic ceramics as nano-multilayered structures through high energy milling, hot pressing and liquid phase sintering

X. Duan, D. Jia, L. C. Zhao, 2017 .

Mineralization of chitosan rods with concentric layered structure induced by chitosan hydrogel

Yu Zhou, D. Jia, Baoqiang Li, 2009, Biomedical materials.

Microstructure and In Vitro Bioactivities of HA/Ti Composites Prepared by Hot Isostatic Pressing

Yu Zhou, D. Jia, Hua Ke, 2007 .

Synthesis and mechanical properties of lightweight hybrid geopolymer foams reinforced with carbon nanotubes

Shu Yan, D. Jia, P. Xing, 2020, International Journal of Applied Ceramic Technology.

Oxidation resistance of SiO2 bonded coating formed on Ti–Al–Zr alloy

D. Jia, Yaming Wang, J. Ouyang, 2014 .

Preparation, characterization and infrared emissivity properties of polymer derived coating formed on 304 steel

D. Jia, Yaming Wang, J. Ouyang, 2012 .

Preparation and anisotropic properties of textured structural ceramics: A review

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of Advanced Ceramics.

Microwave-dielectric and magnetic properties of Ta-doped BiFeO3 nanopowders

Yu Zhou, D. Jia, Wen Wang, 2009 .

Interface adhesion properties of functional coatings on titanium alloy formed by microarc oxidation method

D. Jia, Yaming Wang, J. Ouyang, 2009 .

Achieving near equiaxed α-Ti grains and significantly improved plasticity via heat treatment of TiB reinforced titanium matrix composite manufactured by selective laser melting

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Amorphous AlPO4 coating formed on titanium alloy for high temperature oxidation protection: Oxidation kinetics and microstructure

D. Jia, J. Ouyang, Y. Zhou, 2014 .

Facile One-Step Fabrication of Multilayer Nanocomposite Coating for Radiative Heat Dissipation

Yu Zhou, D. Jia, Yaming Wang, 2019, ACS Applied Electronic Materials.

A self-adjusting PTFE/TiO2 hydrophobic double-layer coating for corrosion resistance and electrical insulation

Yu Zhou, D. Jia, Guoliang Chen, 2020 .

The improved thermal radiation property of SiC doped microarc oxidation ceramic coating formed on niobium metal for metal thermal protective system

Yufeng Zhang, D. Jia, Yaming Wang, 2017 .

An elevated temperature infrared emissivity ceramic coating formed on 2024 aluminium alloy by microarc oxidation

D. Jia, Yaming Wang, J. Ouyang, 2013 .

Dependence of infrared radiation on microstructure of polymer derived ceramic coating on steel

D. Jia, Yaming Wang, J. Ouyang, 2013 .

Characteristic and in vitro bioactivity of a microarc-oxidized TiO(2)-based coating after chemical treatment.

Yu Zhou, D. Jia, Yaming Wang, 2007, Acta biomaterialia.

Growth mechanism of in situ TiB whiskers in spark plasma sintered TiB/Ti metal matrix composites

Yu Zhou, D. Jia, J. Rao, 2006 .

Defects formation of the in situ reaction synthesized TiB whiskers

Yu Zhou, D. Jia, Rong Yu, 2009 .

Microstructural Characterization of In Situ TiB Whiskers in Ti MMCs Fabricated by SPS

Yu Zhou, D. Jia, Q. Meng, 2007 .

Spark plasma sintering of functionally graded material in the Ti–TiB2–B system

Yu Zhou, D. Jia, Q. Meng, 2005 .

Microstructural Characterization of Spark Plasma Sintered In Situ TiB Reinforced Ti Matrix Composite by EBSD and TEM

Yu Zhou, D. Jia, Q. Meng, 2005 .

Microstructure and mechanical properties of in situ TiB reinforced titanium matrix composites based on Ti–FeMo–B prepared by spark plasma sintering

Yu Zhou, D. Jia, Q. Meng, 2004 .

Microstructural characterisation of in situ TiB/Ti matrix composites prepared by mechanical alloying and hot pressing

Yu Zhou, J. Huo, D. Jia, 2004 .

Microstructure evolution and mechanical properties of selective laser melted bulk-form titanium matrix nanocomposites with minor B4C additions

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

In-situ SEM analysis of brittle plasma electrolytic oxidation coating bonded to plastic aluminum substrate: Microstructure and fracture behaviors

Yu Zhou, D. Jia, Yaming Wang, 2019, Materials Characterization.

Microstructural Evolution and Growth Behavior of In Situ TiB Whisker Array in ZrB2–SiC/Ti6Al4V Brazing Joints

D. Jia, P. He, Tiesong Lin, 2013 .

An Nb2O5-SiO2-Al2O3/NbSi2/Nb5Si3 multilayer coating on Nb-Hf alloy to improve oxidation resistance

Yu Zhou, D. Jia, Yaming Wang, 2018 .

A rhodamine-based sensor for Hg2+ and resultant complex as a fluorescence sensor for I−

Yu Zhou, D. Jia, Baoqiang Li, 2016 .

Microstructure and mechanical properties of ZrB2-SiC joints fabricated by a contact-reactive brazing technique with Ti and Ni interlayers

D. Jia, P. He, Tiesong Lin, 2014 .

EIS study of a self-repairing microarc oxidation coating

Yu Zhou, D. Jia, Yaming Wang, 2011 .

CARBONATED APATITE COATING ON CHITOSAN WITH GRADIENT DISTRIBUTION VIA IONS ASSEMBLY

D. Jia, Baoqiang Li, Yongliang Wang, 2010 .

Microstructure, thermal conductivity, and temperature-dependent infrared emissivity of divalent transition metal ions doped α-cordierite ceramics

D. Jia, Guoliang Chen, Yaming Wang, 2022, Materials Today Communications.

Crystallization Kinetics, Properties of α-cordierite Based Glass-ceramics Prepared by Glass Powder Sintering

Zhihua Yang, D. Jia, Lifen Shi, 2022, Journal of Inorganic Materials.

The shape effect of manganese(II,III) oxide nanoparticles on the performance of electrochemical capacitors

Yu Zhou, X. Duan, D. Jia, 2018, Electrochimica Acta.

Thermal shock and ablation behavior of α-cordierite glass-ceramic coating on porous BN/Si2N2O ceramic

Zhihua Yang, D. Jia, Delong Cai, 2019 .

Physical and surface characteristics of the mechanically alloyed SiBCN powder

Zhihua Yang, Yu Zhou, X. Duan, 2012 .

Hydrothermal fabrication of rGO/Apatite layers on AZ31 magnesium alloy for enhanced bonding strength and corrosion resistance

Yu Zhou, D. Jia, Yaming Wang, 2019, Applied Surface Science.

Effect of cesium substitution on the thermal evolution and ceramics formation of potassium-based geopolymer

Meirong Wang, Yu Zhou, Meirong Wang, 2010 .

Highly reliable double-layer coatings on magnesium alloy surfaces for robust superhydrophobicity, chemical durability and electrical property

Yu Zhou, D. Jia, Yaming Wang, 2021, Ceramics International.

Fabrication and characterization of hydroxycarbonate apatite with mesoporous structure

Yu Zhou, D. Jia, Haixiong Tang, 2009 .

Synthesis and formation mechanism of hollow carbon spheres encapsulating magnetite nanocrystals

D. Jia, Y. Shao, B. Liu, 2008 .

ZrSi2/SiO2-Nb2O5/NbSi2 multi-layer coating formed on niobium alloy by HAPC combined with LPDS: microstructure evolution and high temperature oxidation behavior

D. Jia, Guoliang Chen, Yaming Wang, 2022, Corrosion Science.

Influence of residual stress on magnetoelectric coupling of bilayered CoFe2O4/PMN–PT thin films

Yu Zhou, D. Jia, Wen Wang, 2011 .

Formation mechanism, degradation behavior, and cytocompatibility of a double-layered structural MAO/rGO-CaP coating on AZ31 Mg.

Yu Zhou, D. Jia, Yaming Wang, 2020, Colloids and surfaces. B, Biointerfaces.

Rapidly formation of the highly bioactive surface with hydroxyapatite crystals on the titania micro arc oxidation coating by microwave hydrothermal treatment

Yu Zhou, D. Jia, Yaming Wang, 2019, Applied Surface Science.

From bulk to porous structures: Tailoring monoclinic SrAl 2 Si 2 O 8 ceramic by geopolymer precursor technique

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Insight into hexacelsian-to-celsian transformation in hot-pressed BN/BAS composites

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Monoclinic-celsian ceramics formation: Through thermal treatment of ion-exchanged 3D printing geopolymer precursor

Meirong Wang, D. Jia, Jingkun Yuan, 2019, Journal of the European Ceramic Society.

Oxidation kinetic behavior of SiBCN-Ta4HfC5 ceramics at 1600 oC

Zhihua Yang, D. Jia, Daxin Li, 2022, Corrosion Science.

Mechanical alloying derived SiBCN-Ta4HfC5 composite ceramics: study on amorphous transformation mechanism

Zhihua Yang, Yu Zhou, D. Jia, 2022, Journal of Non-Crystalline Solids.

Study on oxidation resistance and oxidative damage mechanism of SiBCN-Ta4HfC5 composite ceramics

Yu Zhou, D. Jia, Daxin Li, 2021, Corrosion Science.

Discovery of ABO4 scheelites with the extra low thermal conductivity through high-throughput calculations

Yanchun Zhou, Yu Zhou, Bin Liu, 2020 .

Green synthesis of high porosity waste gangue microsphere/geopolymer composite foams via hydrogen peroxide modification

Jinlong Yang, Shu Yan, D. Jia, 2019, Journal of Cleaner Production.

Tough Magnetic Chitosan Hydrogel Nanocomposites for Remotely Stimulated Drug Release.

Yu Zhou, D. Jia, Baoqiang Li, 2018, Biomacromolecules.

Effect of Re2O3–MgO additives on the microstructure evolution and properties of β-Si3N4 ceramics

Yu Zhou, D. Jia, Delong Cai, 2021 .

Fabrication of gel cast BN/Si3N4 composite ceramics from surface-coated BN powder

Yu Zhou, D. Jia, Shengjin Wang, 2015 .

Enhanced thermal shock resistance of low-carbon Al2O3-C refractories with direct CVD synthesis of nano carbon decorated oxides

D. Jia, Yawei Li, S. Sang, 2018 .

Factors controlling pure-phase multiferroic BiFeO3 powders synthesized by chemical co-precipitation

Yu Zhou, D. Jia, Z. Lü, 2011 .

Structure and multiferroic properties of BiFeO3 powders

Yu Zhou, D. Jia, Wen Wang, 2009 .

Composition dependent intrinsic defect structures in ASnO3 (A = Ca, Sr, Ba)

B. Liu, Yu Zhou, D. Jia, 2020 .

Thermal properties and thermal shock resistance of BAS-BN composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Effects of BN on the microstructural evolution and mechanical properties of BAS-BN composites

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of Advanced Ceramics.

Microstructural Evolution of H-BN Matrix Composite Ceramics With Amorphous La2O3-Al2O3-SiO2 Glass Phase During Hot Pressing

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Microstructure of hot-pressed h-BN/Si3N4 ceramic composites with Y2O3–Al2O3 sintering additive

D. Jia, Daqing Wei, Q. Meng, 2007 .

Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites

D. Jia, Daqing Wei, Q. Meng, 2006 .

Novel Method for Fabrication of Silicon Nitride/Silicon Oxynitride Composite Ceramic Foams Using Fly Ash Cenosphere as a Pore‐Forming Agent

Yu Zhou, D. Jia, Y. Shao, 2008 .

Microstructural and mechanical characterization of fly ash cenosphere/metakaolin-based geopolymeric composites

Meirong Wang, Yu Zhou, Meirong Wang, 2011 .

Effects of high-temperature heat treatment on the mechanical properties of unidirectional carbon fiber reinforced geopolymer composites

Tiesong Lin, Meirong Wang, Yu Zhou, 2010 .

Thermo-mechanical and Microstructural Characterization of Geopolymers with α-Al2O3 Particle Filler

Tiesong Lin, Meirong Wang, Meirong Wang, 2009 .

Enhanced ablation resistance of HfB2-HfC/SiBCN ceramics under an oxyacetylene torch environment

Zhihua Yang, Yu Zhou, Yongjiang Huang, 2021, Corrosion Science.

Improved oxidation resistance of SPS sintered Si2BC3N ceramics with disilicides (MoSi2, HfSi2, TaSi2) addition

Zhihua Yang, D. Jia, I. Jung, 2020 .

Microstructural evolution and mechanical properties of in situ nano Ta4HfC5 reinforced SiBCN composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of Advanced Ceramics.

Dense amorphous Si2BC1-4N monoliths resistant to high-temperature oxidation for hypersonic vehicle

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Effects of TaC addition on microstructure and mechanical properties of SiBCN composite ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2019 .

Metastable Si-B-C-N ceramics and their matrix composites developed by inorganic route based on mechanical alloying: Fabrication, microstructures, properties and their relevant basic scientific issues

Zhihua Yang, Yu Zhou, D. Jia, 2018, Progress in Materials Science.

Oxidation behavior of SiBCN-Zr composites at 1500 °C prepared by reactive spark plasma sintering

Zhihua Yang, Yi-bing Cheng, Yu Zhou, 2018 .

Effects of boron addition on the high temperature oxidation resistance of dense sSiBCN monoliths at 1500 °C

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Thermal ablation behavior of SiBCN-Zr composites prepared by reactive spark plasma sintering

Zhihua Yang, Yi-bing Cheng, Yu Zhou, 2017 .

High temperature oxidation kinetics of amorphous silicoboron carbonitride monoliths and silica scale growth mechanisms determined by SIMS

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Influence of sol-gel derived ZrB2 additions on microstructure and mechanical properties of SiBCN composites

Zhihua Yang, Yi-bing Cheng, Yu Zhou, 2017 .

A novel in situ synthesis of SiBCN-Zr composites prepared by a sol-gel process and spark plasma sintering.

Zhihua Yang, Yi-bing Cheng, Yu Zhou, 2016, Dalton transactions.

Amorphous silicoboron carbonitride monoliths resistant to flowing air up to 1800 °C

Zhihua Yang, Yu Zhou, D. Jia, 2016 .

Progress of a novel non-oxide Si-B-C-N ceramic and its matrix composites

Zhihua Yang, Yu Zhou, X. Duan, 2012, Journal of Advanced Ceramics.

Ablation properties and mechanisms of BN-coated Cf-reinforced SiBCNZr ceramic composites under an oxyacetylene combustion torch

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

In situ ZrC/Si-B-C-N monoliths prepared by sol-gel and reactive hot-pressing: Processing, microstructure, mechanical properties and oxidation behavior

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of Alloys and Compounds.

Influence of ball milling parameters on the structure of the mechanically alloyed SiBCN powder

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

High-temperature oxidation resistance of dense amorphous boron-rich SiBCN monoliths

Zhihua Yang, Yu Zhou, X. Duan, 2019, Corrosion Science.

Crystallization and microstructural evolution process from the mechanically alloyed amorphous SiBCN powder to the hot-pressed nano SiC/BN(C) ceramic

Zhihua Yang, Yu Zhou, X. Duan, 2012, Journal of Materials Science.

Osseointegration of bioactive microarc oxidized amorphous phase/TiO2 nanocrystals composited coatings on titanium after implantation into rabbit tibia

Yu Zhou, D. Jia, Yaming Wang, 2014, Journal of Materials Science: Materials in Medicine.

The effect of applied voltages on the structure, apatite-inducing ability and antibacterial ability of micro arc oxidation coating formed on titanium surface

Yu Zhou, D. Jia, Yaming Wang, 2018, Bioactive materials.

Hydrothermal biomimetic modification of microarc oxidized magnesium alloy for enhanced corrosion resistance and deposition behaviors in SBF

D. Jia, Yaming Wang, Daqing Wei, 2015 .

ROS scavenging carbon dot chelated hydroxyapatite filler: Target synthesis and enhancing adhesion of hydrogel

Guanxiong Liu, Yu Zhou, D. Jia, 2022, Composites Communications.

Biocorrosion resistance of coated magnesium alloy by microarc oxidation in electrolyte containing zirconium and calcium salts

Yu Zhou, D. Jia, Yaming Wang, 2014, Frontiers of Materials Science.

Evolution Mechanism of Calcium Carbonate in Solution

Yu Zhou, D. Jia, Haixiong Tang, 2010 .

Effects of Si/Al ratio on the structure and properties of metakaolin based geopolymer

Shuai Fu, Meirong Wang, Pengfei Wang, 2016 .

Geopolymers and Their Matrix Composites: A State-of-the-Art Review

Meirong Wang, D. Jia, P. He, 2020, Geopolymer and Geopolymer Matrix Composites.

Synergic effects of nano carbon sources on thermal shock resistance of Al2O3-C refractories

D. Jia, Yawei Li, Tianbin Zhu, 2017 .

Effect of the starting AlN content on the phase formation and property of the novel in-situ fabricated X-SiAlON/BN composites

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of the European Ceramic Society.

Improved oxidation resistance of expanded graphite through nano SiC coating

D. Jia, Yawei Li, Tianbin Zhu, 2018 .

Ultra-fine zirconium diboride powders prepared by a combined sol–gel and spark plasma sintering technique

Xiaojing Wang, Zhihua Yang, Yi-bing Cheng, 2016, Journal of Sol-Gel Science and Technology.

Biomimetic apatite deposited on microarc oxidized anatase-based ceramic coating

Yu Zhou, D. Jia, Daqing Wei, 2008 .

Mechanical properties and plasma erosion resistance of BNp/Al2O3-SiO2 composite ceramics

Daren Yu, Zhihua Yang, Fengbo Ren, 2013 .

Mechanical properties and plasma erosion resistance of BNp/Al2O3-SiO2 composite ceramics

Fengbo Ren, Yu Zhou, D. Jia, 2013, Journal of Central South University.

Influences of novel Si2BC3N antioxidant on the structure and properties of Al2O3-SiC-C castables: In air and coke bedded atmosphere

Zhihua Yang, D. Jia, Yawei Li, 2019, Ceramics International.

Rheology of organics-free aqueous ceramic suspensions for additive manufacturing of dense silicon nitride ceramics

Zhihua Yang, D. Jia, Delong Cai, 2022, Ceramics International.

Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 composite ceramics prepared by gel casting

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

Sintering behavior of gehlenite. Part I: Self-forming, macro-/ mesoporous gehlenite-pore-forming mechanism, microstructure, mechanical, and physical properties

D. Jia, Dong-Kyu Kim, W. Kriven, 2007 .

Mechanical /thermal Shock Properties and Failure Mechanisms of Cf/SiBCN Composites Effect of Sintering Densification and Fiber Coating

Zhihua Yang, Bin Wang, Yu Zhou, 2021 .

A facile strategy for fabricating self-sealing dense coating grown in-situ on porous silicon nitride ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

Effect of h-BN on the mechanical and dielectric properties of porous h-BN/Si3N4 composite ceramics prepared by gel casting

Zhihua Yang, Yu Zhou, X. Duan, 2012 .

Characterization of porous silicon nitride/silicon oxynitride composite ceramics produced by sol infiltration

Yu Zhou, D. Jia, Y. Shao, 2010 .

Characterization of porous silicon nitride ceramics by pressureless sintering using fly ash cenosphere as a pore-forming agent

D. Jia, Y. Shao, B. Liu, 2009 .

Rapid synthesis of Ti alloy with B addition by spark plasma sintering

Yu Zhou, D. Jia, Q. Meng, 2005 .

Preparation, microstructures, mechanical properties and oxidation resistance of SiBCN/ZrB2–ZrN ceramics by reactive hot pressing

Zhihua Yang, Yu Zhou, D. Jia, 2015 .

Processing and characterization of SiB0.5C1.5N0.5 produced by mechanical alloying and subsequent spark plasma sintering

Zhihua Yang, Yu Zhou, D. Jia, 2008 .

Fabrication of Si2N2O Ceramic Foam by Combination of Direct Ink Writing and Biological Foaming Techniques

Zhihua Yang, Yu Zhou, D. Jia, 2020, Advanced Engineering Materials.

Spark plasma sintering reaction synthesized TiB reinforced titanium matrix composites

Yu Zhou, D. Jia, Dechang Jia, 2005 .

Diffusion bonding of ZrB2–SiC/Nb with in situ synthesized TiB whiskers array

D. Jia, P. He, Tiesong Lin, 2012 .

Diffusion bonding of Ti‐coated C f ‐SiC f /SiBCN composites to Nb using Ag–Pd interlayer

D. Jia, Panpan Lin, Tiesong Lin, 2021, International Journal of Applied Ceramic Technology.

Interfacial reaction evolution of the ZrC ceramic joint diffusion bonded with Ni interlayer

D. Jia, P. He, Tiesong Lin, 2014 .

Improved Oxidation Resistance of Zirconium Carbide at 1500°C by Lanthanum Hexaboride Additions

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

ZrC–ZrB2 matrix composites with enhanced toughness prepared by reactive hot pressing

Zhihua Yang, Yu Zhou, X. Duan, 2010 .

Study on microstructures and mechanical properties of short-carbon-fiber-reinforced SiC composites prepared by hot-pressing

Yu Zhou, D. Jia, Xiu-lan He, 2009 .

Incorporation of BN-coated carbon fibers into ZrB2/SiBCN ceramic composites and their ablation behavior

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Short Carbon Fiber (Csf)-Reinforced Geopolymer Matrix Composites

Meirong Wang, D. Jia, P. He, 2020 .

In situ crack growth observation and fracture behavior of short carbon fiber reinforced geopolymer matrix composites

Tiesong Lin, Meirong Wang, Meirong Wang, 2010 .

Improvement of high-temperature mechanical properties of heat treated Cf/geopolymer composites by Sol-SiO2 impregnation

Meirong Wang, Yu Zhou, Meirong Wang, 2010 .

Design and preparation of MoSi2/SiO2-Nb2O5/NbSi2 multilayer coating on Nb alloy: Microstructure and hot corrosion behavior

D. Jia, Guoliang Chen, Yaming Wang, 2022, Corrosion Science.

Oxidation resistance of hot-pressed SiC–BN composites

Zhihua Yang, Yu Zhou, D. Jia, 2008 .

Ablation mechanism and properties of in-situ SiAlON reinforced BN–SiO2 ceramic composite under an oxyacetylene torch environment

Zhihua Yang, Yu Zhou, X. Duan, 2014 .

High-temperature oxidation behavior of dense SiBCN monoliths: Carbon-content dependent oxidation structure, kinetics and mechanisms

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Effects of in situ amorphous graphite coating on ablation resistance of SiC fiber reinforced SiBCN ceramics in an oxyacetylene flame

Zhihua Yang, Yu Zhou, X. Duan, 2016 .

Ablation behavior and mechanism of SiCf/Cf/SiBCN ceramic composites with improved thermal shock resistance under oxyacetylene combustion flow

Zhihua Yang, Yu Zhou, D. Jia, 2015 .

Microstructure, oxidation and thermal shock resistance of graphene reinforced SiBCN ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2016 .

SiC fiber reinforced geopolymer composites, part 1: Short SiC fiber

Zhihua Yang, Yu Zhou, Shu Yan, 2016 .

Study on the oxygen diffusion in the oxide layers of SiBCN ceramics by SIMS

Yu Zhou, D. Jia, Daxin Li, 2021, Journal of the European Ceramic Society.

Crystallinity dependence of high-temperature oxidation of silicoboron carbonitride monoliths

Zhihua Yang, Yu Zhou, D. Jia, 2021, Corrosion Science.

Ablation behavior of graphene reinforced SiBCN ceramics in an oxyacetylene combustion flame

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Oxidation of ZrC–30 vol% SiC composite in air from low to ultrahigh temperature

Zhihua Yang, Yu Zhou, X. Duan, 2012 .

Influence of SiC particulate size on the microstructural evolution and mechanical properties of Al–6Ti–6Nb matrix composites

D. Jia, 2000 .

Microstructure evolution and its effect on the mechanical properties of the ZrC–SiC composite joint diffusion bonded with pure Ni foil

Peng He, Tiesong Lin, Jicai Feng, 2014 .

Effect of Preforming Process and Starting Fused SiO2 Particle Size on Microstructure and Mechanical Properties of Pressurelessly Sintered BNp/SiO2 Ceramic Composites

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

Microstructure and mechanical properties of SiCf/SiBCN ceramic matrix composites

Zhihua Yang, Yu Zhou, X. Duan, 2015, Journal of Advanced Ceramics.

Effect of magnesium aluminum silicate glass on the thermal shock resistance of BN matrix composite ceramics

J. Hosson, Zhihua Yang, Yu Zhou, 2017 .

Pressureless sintering of ZrC-based ceramics by enhancing powder sinterability

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

Enhanced Strengths and Thermal Shock Resistance of SiC-BN-10 Vol% Cf Composites through ZrB2 Addition

Zhihua Yang, D. Jia, Yawei Li, 2019, Transactions of the Indian Ceramic Society.

Research on the interfacial structure and property improvement of the Cfiber/2Si-B-3C-N ceramic matrix composite

Zhihua Yang, D. Jia, Bin Yang, 2018, Materials Characterization.

Preparation and mechanical properties of laminated B4C–TiB2/BN ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2021, Ceramics International.

Spark plasma sintering and toughening of graphene platelets reinforced SiBCN nanocomposites

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Characteristic of microarc oxidized coatings on titanium alloy formed in electrolytes containing chelate complex and nano-HA

Yu Zhou, D. Jia, Yaming Wang, 2007 .

Apatite formation on the surface of a Ti/HA composite in a simulated body fluid

Hongwei Wang, D. Jia, Y. Zhou, 2000 .

Structure of calcium titanate/titania bioceramic composite coatings on titanium alloy and apatite deposition on their surfaces in a simulated body fluid

Yaming Wang, Yu Zhou, D. Jia, 2007 .

Bioactive coating with hierarchical double porous structure on titanium surface formed by two-step microarc oxidation treatment

Yu Zhou, D. Jia, Yaming Wang, 2014 .

A new sintering additive for silicon carbide ceramic

D. Jia, Yizhi Liu, Y. Zhou, 2003 .

Effect of a new additive on mechanical properties of hot-pressed silicon carbide ceramics

D. Jia, Y. Zhou, Zhuangsong Huang, 2002 .

Mechanical properties and thermal shock resistance of Si2BC3N ceramics with ternary Al4SiC4 additive

Zhihua Yang, Yu Zhou, D. Jia, 2018, Ceramics International.

Oxidation protection of C/Si-C-N composite by a mullite interphase

D. Jia, G. Lu, Chengyu Zhang, 2008 .

Processing and mechanical performance of 3D Cf/SiCN composites prepared by polymer impregnation and pyrolysis

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Carbon‐content‐dependent phase composition, microstructural evolution, and mechanical properties of SiBCN monoliths

Y. G. Liu, Zhihua Yang, Yu Zhou, 2018 .

Effect of Si/C ratio and their content on the microstructure and properties of Si-B-C-N Ceramics prepared by spark plasma sintering techniques

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

Preparation of SiCN(O) Material with Vinyl Trichlorosilane

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

Coexistence of broad-bandwidth and strong microwave absorption in Co 2+ -Zr 4+ co-doped barium ferrite ceramics

Zhongxiang Zhou, Jun Li, D. Jia, 2018 .

Influence of titanium diboride on the microstructure and mechanical properties of silicon nitride ceramic

D. Jia, Ye Sun, Liang‐ai Huang, 2004 .

Microstructural and mechanical properties of porous Si3N4 carbon coated ceramic brazed with a cobalt-silicon filler

D. P. Sekulic, D. Jia, Tiesong Lin, 2017 .

Microstructure and High‐Temperature Properties of SI‐B‐C‐N Ma‐Powders and Ceramic

Zhihua Yang, X. Duan, D. Jia, 2010 .

Simple and scalable synthesis of super-repellent multilayer nanocomposite coating on Mg alloy with mechanochemical robustness, high-temperature endurance and electric protection

Yu Zhou, D. Jia, Yaming Wang, 2021 .

The structure and in vitro apatite formation ability of porous titanium covered bioactive microarc oxidized TiO2-based coatings containing Si, Na and Ca

Yu Zhou, D. Jia, Yaming Wang, 2014 .

Effect of discharge pulsating on microarc oxidation coatings formed on Ti6Al4V alloy

D. Jia, Yaming Wang, Bo Jiang, 2005 .

Achieving high-efficiency electrically insulating ceramic layer formed on SiCp/Al composite by bipolar pulsed PEO for novel integrated strategy

D. Jia, Yaming Wang, Yongchun Zou, 2022, Surface and Coatings Technology.

One-step fabrication of double-layer nanocomposite coating by plasma electrolytic oxidation with particle addition

Yu Zhou, D. Jia, Guoliang Chen, 2022, Applied Surface Science.

Plasma electrolytic oxidation induced ‘local over-growth’ characteristic across substrate/coating interface: Effects and tailoring strategy of individual pulse energy

Yu Zhou, D. Jia, Yaming Wang, 2018 .

Titania nanotube/nano-brushite composited bioactive coating with micro/nanotopography on titanium formed by anodic oxidation and hydrothermal treatment

Yu Zhou, D. Jia, Yaming Wang, 2015 .

Effect of applied voltage on the structure of microarc oxidized TiO2-based bioceramic films

Yu Zhou, D. Jia, Yaming Wang, 2007 .

The effect of a carbon layer on the microstructural and mechanical properties of porous BN/Si 3 N 4 ceramic brazed with a titanium-silicon filler

D. P. Sekulic, D. Jia, Tiesong Lin, 2017 .

Formation of CaTiO3/TiO2 composite coating on titanium alloy for biomedical applications.

Yu Zhou, D. Jia, Yaming Wang, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

Structures, bonding strength and in vitro bioactivity and cytotoxicity of electrochemically deposited bioactive nano-brushite coating/TiO2 nanotubes composited films on titanium

Yu Zhou, D. Jia, Yaming Wang, 2018 .

Celsian formation from barium-exchanged geopolymer precursor: Thermal evolution

Pengfei Wang, D. Jia, J. Rao, 2017 .

3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide

Zhihua Yang, Jing Zhong, D. Jia, 2017 .

Preparation and in-situ high-temperature mechanical properties of Cf-SiCf reinforced geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2017 .

In situ fabrication and characterization of graphene/geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2015 .

Effects of fibre content on mechanical properties and fracture behaviour of short carbon fibre reinforced geopolymer matrix composites

Meirong Wang, D. Jia, Tiesong Lin, 2009 .

MECHANICAL PROPERTIES AND FRACTURE BEHAVIOR OF ELECTROLESS NI-PLATED SHORT CARBON FIBER REINFORCED GEOPOLYMER MATRIX COMPOSITES

D. Jia, Tiesong Lin, 2009 .

Effects of fiber length on mechanical properties and fracture behavior of short carbon fiber reinforced geopolymer matrix composites

Tiesong Lin, Meirong Wang, Meirong Wang, 2008 .

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of the European Ceramic Society.

UV-crosslinkable and thermo-responsive chitosan hybrid hydrogel for NIR-triggered localized on-demand drug delivery.

Yu Zhou, D. Jia, Yaming Wang, 2017, Carbohydrate polymers.

Characterization of domain configurations in LiTaO3/Al2O3 ceramic composites

Yu Zhou, M. Fang, Zhaohui Huang, 2011 .

A comparative study on high temperature oxidation behavior of SiC, SiC-BN and SiBCN monoliths

Zhihua Yang, Qingqing Chen, D. Jia, 2021, Corrosion Science.

Thermal shock resistance of in situ formed SiC–BN composites

Zhihua Yang, Yu Zhou, D. Jia, 2008 .

Effect of sintering additives on microstructures and mechanical properties of short-carbon-fiber-reinforced SiC composites prepared by precursor pyrolysis–hot pressing

Yu Zhou, D. Jia, Xiu-lan He, 2006 .

Microstructures of short-carbon-fiber-reinforced SiC composites prepared by hot-pressing

Yu Zhou, D. Jia, Xiu-lan He, 2008 .

Low temperature sintering of ZrC–SiC composite

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

Hot corrosion behavior of NbSi2/SiO2-Nb2O5 multilayer coating on Nb alloy

Yu Zhou, D. Jia, Yaming Wang, 2018, Journal of Alloys and Compounds.

Spark Plasma Sintered ZrO2(Y2O3)-Al2O3-SrSO4 Self-Lubricating Nanocomposites for High Temperature Tribological Applications

Yu Zhou, S. Sasaki, D. Jia, 2007 .

Enhanced mechanical properties and thermal shock resistance of Si2BC3N ceramics with SiC coated MWCNTs

Zhihua Yang, Yu Zhou, D. Jia, 2019, Journal of Advanced Ceramics.

Effect of Polycarbosilane Content on Microstructures and Mechanical Properties of Short-Carbon-Fibre-Reinforced SiC Composites

Yu Zhou, D. Jia, Xiu-lan He, 2006 .

Chemical treatment of TiO2-based coatings formed by plasma electrolytic oxidation in electrolyte containing nano-HA, calcium salts and phosphates for biomedical applications

Yu Zhou, D. Jia, Yaming Wang, 2008 .

Effects of fiber contents on the mechanical and microwave absorbent properties of carbon fiber felt reinforced geopolymer composites

Zhihua Yang, X. Duan, D. Jia, 2018, Ceramics International.

Rapid fabrication of C/C/SiC composite by PIP of HMDS

W. Han, D. Jia, G. Lu, 2007 .

Preparation of highly oriented h-BN based textured ceramics via grain rearrangement under DLP printing and low-pressure sintering

X. Duan, D. Jia, Shanghua Wu, 2020 .

Effects of sintering temperature on the microstructure and properties of h-BN ceramics with MAS as liquid sintering aid

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

MAS-content dependence of the texture and fracture behavior of h-BN-MAS composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2019, Ceramics International.

Short SiC Fiber and Hybrid SiC/Carbon Fiber Reinforced Geopolymer Matrix Composites

Meirong Wang, D. Jia, P. He, 2020 .

Enhanced thermal shock and oxidation resistance of Si2BC3N ceramics through MWCNTs incorporation

Zhihua Yang, Yu Zhou, D. Jia, 2018, Journal of Advanced Ceramics.

Enhanced mechanical properties, thermal shock resistance and oxidation resistance of Si2BC3N ceramics with Zr-Al addition

Zhihua Yang, Yu Zhou, D. Jia, 2018 .

Preparation and mechanical performance of Cf-SiCf-(Al2O3p) reinforced geopolymer composites

Zhihua Yang, Yu Zhou, Shu Yan, 2017 .

Microstructures and mechanical properties of SiBCNAl ceramics produced by mechanical alloying and subsequent hot pressing

D. Jia, Pengfei Zhang, Zhi-hua Yang, 2010 .

Carbon content-dependent microstructures, surface characteristics and thermal stability of mechanical alloying derived SiBCN powders

Zhihua Yang, Yu Zhou, X. Duan, 2018 .

Growth of plasma electrolytic oxidation coatings on Nb and corresponding corrosion resistance

Yu Zhou, D. Jia, Yaming Wang, 2019, Applied Surface Science.

Structure, MC3T3-E1 cell response, and osseointegration of macroporous titanium implants covered by a bioactive microarc oxidation coating with microporous structure.

Yu Zhou, D. Jia, Yaming Wang, 2014, ACS applied materials & interfaces.

Microarc oxidized TiO2 based ceramic coatings combined with cefazolin sodium/chitosan composited drug film on porous titanium for biomedical applications.

Yu Zhou, D. Jia, Yaming Wang, 2013, Materials science & engineering. C, Materials for biological applications.

Microstructural, magnetic and electric properties of sol-gel synthesized Na0.5Bi0.5TiO3–CoFe2O4 composites

Yu Zhou, Fangzhe Li, D. Jia, 2020 .

Mechanical, dielectric and thermal properties of porous boron nitride/silicon oxynitride ceramic composites prepared by pressureless sintering

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Ambient and elevated temperature mechanical properties of hot-pressed fused silica matrix composite

D. Jia, Y. Zhou, T. Lei, 2003 .

Micro structure and mechanical properties of Al-12Ti-6Nb prepared by mechanical alloying

D. Jia, Y. Zhou, T. Lei, 1997 .

Effect of SiC particulate sizes on the mechanical properties of Al-6Ti-6Nb matrix composites prepared by a mechanical alloying technique

D. Jia, Y. Zhou, H. Han, 1999 .

Microstructural evolution, mechanical and thermal properties of LaB6 embedded in Si-B-C-N prepared by spark plasma sintering

Zhihua Yang, Yu Zhou, D. Jia, 2017 .

Structure, electricity, and bandgap modulation in Fe2O3–doped potassium sodium niobate ceramics

Zhongxiang Zhou, Jun Li, D. Jia, 2018, Ceramics International.

Dependence of dielectric behavior in BiFeO3 ceramics on intrinsic defects

P. Withers, Yu Zhou, D. Jia, 2012 .

Mechanical and dielectric properties of gelcasted Si3N4 porous ceramic using CaHPO4 as an additive

Zhihua Yang, Yu Zhou, X. Duan, 2012 .

Thermal shock resistance of SiC whisker reinforced Si3N4 ceramic composites

D. Jia, Y. Zhou, T. Lei, 1996 .

The microstructural evolution, mechanical and dielectric properties of BNW/SiO2 ceramics

Zhihua Yang, B. Li, Yu Zhou, 2022, Ceramics International.

Ion sputtering erosion mechanisms of h-BN composite ceramics with textured microstructures

Daren Yu, Zhihua Yang, Yu Zhou, 2014 .

Effect of the BN content on the thermal shock resistance and properties of BN/SiO2 composites fabricated from mechanically alloyed SiBON powders

Zhihua Yang, Yu Zhou, X. Duan, 2017 .

Unveiling structural features and mechanical properties of amorphous Si2BC3N by density functional theory

Zhihua Yang, D. Jia, Daxin Li, 2023, Journal of Materials Science & Technology.

Processing behavior of nanocrystalline NiAl during milling, sintering and mechanical loading and interpretation of its intergranular fracture

D. Jia, Mohammad Bagher Rahaei, 2014 .

Effect of solid contents on the mechanical properties of SiC–10 wt.%AlN ceramic composites prepared by gelcasting

Zhihua Yang, Yu Zhou, X. Duan, 2013 .

In-situ formation of bulk and porous h-AlN/SiC-based ceramics from geopolymer technique

Zhihua Yang, Yu Zhou, X. Duan, 2019 .

Effect of hexagonal BN on the microstructure and mechanical properties of Si3N4 ceramics

D. Jia, Ye Sun, C. Guan, 2007 .

Synergistic effects of surface chemistry and topologic structure from modified microarc oxidation coatings on Ti implants for improving osseointegration.

Yu Zhou, D. Jia, Yaming Wang, 2015, ACS applied materials & interfaces.

Resettable Heterogeneous Catalyst: (Re)Generation and (Re)Adsorption of Ni Nanoparticles for Repeated Synthesis of Carbon Nanotubes on Ni–Al–O Thin Films

K. Sun, Yu Zhou, D. Jia, 2018, ACS Applied Nano Materials.

In situ hybridization to chitosan/magnetite nanocomposite induced by the magnetic field

Yu Zhou, D. Jia, Baoqiang Li, 2006 .

Microstructure and Toughening Mechanisms in an Al2O3 Ceramic Matrix Composite Dispersed with LiTaO3 Particles

Yu Zhou, D. Jia, Y.G. Liu, 2005 .

Fracture behavior and mechanisms of LiTaO3 piezoelectric ceramic particles dispersed in Al2O3 matrix ceramic composite

D. Jia, Y. Zhou, Yaocheng Liu, 2003 .

Domain structures and toughening mechanism in Al2O3 matrix ceramic composites dispersed with piezoelectric LiTaO3

Yu Zhou, D. Jia, Yan’gai Liu, 2003 .

Domain switching toughening in a LiTaO3 dispersed Al2O3 ceramic composite

Yue Chen, D. Jia, Yizhi Liu, 2002 .

Microstructure and mechanical properties of a lithium tantalate-dispersed-alumina ceramic composite

D. Jia, Y. Zhou, Y. Liu, 2002 .

Mechanical Properties and Plasma Erosion Resistance of ZrO2p(3Y)/BN-SiO2 Ceramic Composites under Different Sintering Temperature

Daren Yu, Zhihua Yang, Yu Zhou, 2011, MSE 2011.

Hot-press sintering studies of sol-gel-prepared composite powders: A novel preparation method to improve mechanical properties of BN-BAS composite ceramics

Zhihua Yang, D. Jia, Daxin Li, 2022, Ceramics International.

Microstructure and erosion resistance of in-situ SiAlON reinforced BN-SiO2 composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2016, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Study on the plasma erosion resistance of ZrO2p(3Y)/BN–SiO2 composite ceramics

Daren Yu, Zhihua Yang, Yu Zhou, 2013 .

Anisotropies in structure and properties of hot-press sintered h-BN-MAS composite ceramics: Effects of raw h-BN particle size

Zhihua Yang, Yu Zhou, X. Duan, 2019, Journal of the European Ceramic Society.

Effect of AlN and ZrO 2 on the microstructure and property of the 2Si-B-3C-N ceramic

D. Jia, Bin Yang, Peng Zhang, 2018 .

Influence of sintering pressure on the crystallization and mechanical properties of BN-MAS composite ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2016, Journal of Materials Science.

Thermal shock resistance of the porous boron nitride/silicon oxynitride ceramic composites

Zhihua Yang, Yu Zhou, D. Jia, 2018, International Journal of Applied Ceramic Technology.

Fabrication and properties of embedded dense coating on direct ink writing Si2N2O porous ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

The preparation, microstructure and mechanical properties of a dense MgO–Al2O3–SiO2 based glass-ceramic coating on porous BN/Si2N2O ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2018, RSC advances.

Fabrication and properties of dense α-cordierite glass-ceramic coating on porous BN/Si2N2O ceramic

Zhihua Yang, Yu Zhou, D. Jia, 2018, Journal of the European Ceramic Society.

Effect of holding time on microstructure, mechanical, water resistance and dielectric properties of α-cordierite glass-ceramic coating on porous BN/Si2N2O ceramic

Zhihua Yang, Yu Zhou, D. Jia, 2018, Ceramics International.

Effects of pore structures on the dielectric properties of silicon nitride-based ceramics

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Quasi-static and dynamic compressive behavior of BN-BAS composite ceramic at room temperature and 1000 °C

Zhihua Yang, D. Jia, Daxin Li, 2022, Ceramics International.

A strategy for fabricating anisotropic SI 3 N 4 ceramics with controllable mechanical and thermal properties

Zhihua Yang, Yu Zhou, D. Jia, 2020 .

Crystallization Behavior of Amorphous Si2BC3N Ceramic Monolith Subjected to High Pressure

Zhihua Yang, Yu Zhou, X. Duan, 2015 .

Structural and microstructural characterization of SiB0.5C1.5N0.8Al0.3 powders prepared by mechanical alloying using aluminum nitride as aluminum source

Zhihua Yang, Yu Zhou, X. Duan, 2011 .

BBPPAmorphous Si-B-C-N Ceramics Fabricated by High Energy Ball Milling and Hot Pressing

Yu Zhou, D. Jia, Z. Yang, 2007 .

The New Complex High-entropy Metal Boron Carbonitride: Microstructure and Mechanical Properties

Zhihua Yang, Yu Zhou, D. Jia, 2021 .

Synthesis and thermal stability of novel high-entropy metal boron carbonitride ceramic powders

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Stacking Faults and Growth Mechanism of In Situ TiB Whiskers and Interface Structures in SPSed TiB/Ti(FeMo) Composites

Yu Zhou, D. Jia, Q. Meng, 2007 .

In Situ TiB Reinforced Titanium Metal Matrix Composites Prepared by Spark Plasma Sintering

Yu Zhou, D. Jia, H. Feng, 2005 .

Microstructure of SiCw reinforced Al–12Ti composites prepared by powder metallurgical technique

D. Jia, Y. Zhou, 1999 .

3D-printing of architectured short carbon fiber-geopolymer composite

Zhihua Yang, Yu Zhou, D. Jia, 2021, Composites Part B: Engineering.

Mechanically Robust Polyacrylamide Composite Hydrogel Achieved by Integrating Lamellar Montmorillonite and Chitosan Microcrystalline Structure into Covalently Cross-linked Network

Yu Zhou, D. Jia, Baoqiang Li, 2020 .

3D printing geopolymer nanocomposites: Graphene oxide size effects on a reactive matrix

Zhihua Yang, Yu Zhou, Jing Zhong, 2020 .

Densi cation and crystallisation behaviour of Si–B–O–N ceramics prepared by hot pressing with organic precursors

G. Wen, Yu Zhou, D. Jia, 2002 .

Three-dimensional graphene oxide/polypyrrole composite electrodes fabricated by one-step electrodeposition for high performance supercapacitors

F. Walsh, Xiaohong Li, Yu Zhou, 2015 .

Effect of heat treatment on the structure and in vitro bioactivity of microarc-oxidized (MAO) titania coatings containing Ca and P ions

D. Jia, Yaming Wang, Daqing Wei, 2007 .

Visual in vivo degradation of injectable hydrogel by real-time and non-invasive tracking using carbon nanodots as fluorescent indicator.

Yu Zhou, D. Jia, Yaming Wang, 2017, Biomaterials.

Synthesis, piezoelectric property and domain behaviour of the vertically aligned K1−xNaxNbO3 nanowire with a morphotropic phase boundary

Yu Zhou, D. Jia, Wen Wang, 2017 .

A theoretical strategy of pure carbon materials for lightweight and excellent absorption performance

G. Wen, Yu Zhou, D. Jia, 2020 .

Solvents adjusted pure phase CoCO3 as anodes for high cycle stability

Yu Zhou, D. Jia, Tao Zhang, 2020, Journal of Advanced Ceramics.

Ultrafine SnO2 anchored in ordered mesoporous carbon framework for lithium storage with high capacity and rate capability

X. Duan, D. Jia, Yu Zhou, 2021 .

Strong Electron Coupling of Ru and Vacancy-Rich Carbon Dots for Synergistically Enhanced Hydrogen Evolution Reaction.

Yu Zhou, D. Jia, Qingfeng Sun, 2021, Small.

Enhanced mechanical properties of polyacrylamide/chitosan hydrogels by tuning the molecular structure of hyperbranched polysiloxane

Yu Zhou, D. Jia, Baoqiang Li, 2019, Materials & Design.

Zn0.1Ca0.1Sr0.4Ba0.4ZrO3: A non-equimolar multicomponent perovskite ceramic with low thermal conductivity

Yanchun Zhou, Yu Zhou, D. Jia, 2020 .

Molten salt synthesis of nitrogen and oxygen enriched hierarchically porous carbons derived from biomass via rapid microwave carbonization for high voltage supercapacitors

Yu Zhou, D. Jia, Yaming Wang, 2018 .

Structure and apatite formation of microarc oxidized TiO2-based films before and after alkali-treatment by various alkali concentrations

D. Jia, Daqing Wei, Q. Meng, 2008 .

Hydrothermal synthesis of pollucite from metakaolin-based geopolymer for hazardous wastes storage

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Seed-mediated growth of ultra-thin triangular magnetite nanoplates.

Zhihua Yang, Yu Zhou, X. Duan, 2017, Chemical communications.

Pulsed electrochemical fabrication of graphene/polypyrrole composite gel films for high performance and flexible supercapacitors

Yu Zhou, D. Jia, Zhenyu Li, 2020 .

Materials and fabrication of electrode scaffolds for deposition of MnO2 and their true performance in supercapacitors

F. Walsh, Xiaohong Li, Yu Zhou, 2015 .

Graphene/carbon black hybrid film for flexible and high rate performance supercapacitor

Yan Liu, Yaming Wang, Yu Zhou, 2014 .

Orderly stacked graphene sheets supporting SnO2 nanoparticles as an anode material for lithium-ion batteries with incremental capacity

Yu Zhou, D. Jia, Dongdong Liu, 2021 .

Mn3O4 tetragonal bipyramid laden nitrogen doped and hierarchically porous carbon composite as positive electrode for high-performance asymmetric supercapacitor

Yu Zhou, D. Jia, Yaming Wang, 2020 .

Al2O3/reduced graphene oxide double-layer radiative coating for efficient heat dissipation

Yu Zhou, D. Jia, Yaming Wang, 2018, Materials & Design.

Direct Ink Writing of Porous SiC Ceramics with Geopolymer as Binder

Zhihua Yang, D. Jia, P. Colombo, 2022, Journal of the European Ceramic Society.

A First Principles Study of Ferroelectricity and Magnetism Coexisting in Fe-Doped K0.5Na0.5NbO3

Zhongxiang Zhou, Jun Li, D. Jia, 2018, Journal of Electronic Materials.

Finite element analysis of effect of grain orientation on the thermal conduction of h-BN ceramics

Zhihua Yang, Yu Zhou, X. Duan, 2020 .

Synthesis of Novel Cobalt-Containing Polysilazane Nanofibers with Fluorescence by Electrospinning

Zhihua Yang, Yu Zhou, X. Duan, 2016, Polymers.

Preparation of BiFeO3 Nanopowders Using Acetylacetone as Stabilizer

Yu Zhou, D. Jia, Wen Wang, 2010 .

High-yield synthesis of strong photoluminescent N-doped carbon nanodots derived from hydrosoluble chitosan for mercury ion sensing via smartphone APP.

Lei Wang, Baoqiang Li, Yaming Wang, 2016, Biosensors & bioelectronics.

Conformal coating containing Ca, P, Si and Na with double-level porous surface structure on titanium formed by a three-step microarc oxidation

Yu Zhou, D. Jia, Yaming Wang, 2015 .

The effect of titanium bead diameter of porous titanium on the formation of micro-arc oxidized TiO2-based coatings containing Si and Ca

Yu Zhou, D. Jia, Yaming Wang, 2013 .

Ball-Milled Graphite as an Electrode Material for High Voltage Supercapacitor in Neutral Aqueous Electrolyte

Yu Zhou, D. Jia, Yaming Wang, 2012 .

Efficiently Synergistic Hydrogen Evolution Realized by Trace Amount of Pt-Decorated Defect-Rich SnS2 Nanosheets.

Zhiguo Wang, Yu Zhou, D. Jia, 2017, ACS applied materials & interfaces.

Hyperbranched polysiloxane for highly stretchable and tough hydrogel by one-pot in situ polymerization

Yu Zhou, D. Jia, Baoqiang Li, 2017 .

Facile Co-Electrodeposition Method for High-Performance Supercapacitor Based on Reduced Graphene Oxide/Polypyrrole Composite Film.

Yu Zhou, D. Jia, Yaming Wang, 2017, ACS applied materials & interfaces.

Vertically aligned two-dimensional SnS2 nanosheets with a strong photon capturing capability for efficient photoelectrochemical water splitting

Wei Zheng, Tawfique Hasan, Zhonghua Li, 2017 .

A superior microwave absorption material: Ni2+-Zr4+ Co-Doped barium ferrite ceramics with large reflection loss and broad bandwidth

Zhongxiang Zhou, Jun Li, D. Jia, 2019, Current Applied Physics.

Additive manufacturing of geopolymers with hierarchical porosity for highly efficient removal of Cs.

Zhihua Yang, D. Jia, P. Colombo, 2022, Journal of hazardous materials.

Effect of microarc oxidation coating on fatigue performance of Ti–Al–Zr alloy

D. Jia, Yaming Wang, J. Ouyang, 2009 .

Shape evolution of two dimensional hexagonal boron nitride single domains on Cu/Ni alloy and its applications in ultraviolet detection

Yu Zhou, D. Jia, P. Hu, 2019, Nanotechnology.

B2O3-assisted low-temperature crystallization of pollucite structures and their potential applications in Cs+ immobilization

Zhihua Yang, Yu Zhou, X. Duan, 2020, Journal of Nuclear Materials.

Direct ink writing of geopolymer with high spatial resolution and tunable mechanical properties

Yu Zhou, Meirong Wang, D. Jia, 2021 .

Controlled growth of six-point stars MoS2 by chemical vapor deposition and its shape evolution mechanism

Wei Zheng, Shiwei Wu, Yunfeng Qiu, 2017, Nanotechnology.

Electronic structure and optical properties of Al-doped ZnO.

D. Jia, Shuchen Lü, S. Fu, 2011, Journal of nanoscience and nanotechnology.

Recent advances in preparation, properties and device applications of two-dimensional h-BN and its vertical heterostructures

Yu Zhou, D. Jia, P. Hu, 2017 .

First-principles study of the electronic structure of Al and Sn co-doping ZnO system

D. Jia, Shengqiang Zhou, Shuchen Lü, 2013 .

In-situ reduced graphene oxide/geopolymer composites for efficient Cs+ immobilization

Yu Zhou, D. Jia, P. He, 2021 .

Processing and Properties of Ferroelectric Bi4-x La xTi3O12 Ceramics

Yu Zhou, D. Jia, Wen Wang, 2008 .

Intrinsic Dipole Coupling in 2D van der Waals Ferroelectrics for Gate‐Controlled Switchable Rectifier

W. Cao, Bin Yang, Yu Zhou, 2019, Advanced Electronic Materials.

In Vitro Cell Uptake of Biocompatible Magnetite/Chitosan Nanoparticles with High Magnetization: A Single-Step Synthesis Approach for In-Situ-Modified Magnetite by Amino Groups of Chitosan

Yu Zhou, D. Jia, Baoqiang Li, 2012, Journal of biomaterials science. Polymer edition.

Two-Dimensional van der Waals Materials with Aligned In-Plane Polarization and Large Piezoelectric Effect for Self-Powered Piezoelectric Sensors.

W. Cao, Zhiguo Wang, Yu Zhou, 2019, Nano letters.

Formation mechanism for oxidation synthesis of carbon nanomaterials and detonation process for core-shell structure

D. Jia, Chunhua Fan, Y. Shao, 2018 .

Effect of fiber content on properties of a short carbon fiber reinforced fused silica matrix composite

D. Jia, Y. Zhou, 2006 .

Biologically Inspired Scalable-Manufactured Dual-layer Coating with a Hierarchical Micropattern for Highly Efficient Passive Radiative Cooling and Robust Superhydrophobicity.

Yu Zhou, D. Jia, Guoliang Chen, 2021, ACS applied materials & interfaces.

Robust Inorganic Daytime Radiative Cooling Coating Based on a Phosphate Geopolymer.

Yu Zhou, J. Qiu, D. Jia, 2020, ACS applied materials & interfaces.

Rational design of compact ceramic coating on SiCp/Al composites by tailoring soft sparking discharge of plasma electrolytic oxidation

Yu Zhou, D. Jia, Yaming Wang, 2023, Surface & Coatings Technology.

Growth mechanism and thermoelectric properties of β-FeSi2 matrix with Si nanowires

D. Jia, Shuchen Lü, Xiu-rong Qu, 2011 .

Chitosan in-situ grafted magnetite nanoparticles toward mechanically robust and electrically conductive ionic-covalent nanocomposite hydrogels with sensitive strain-responsive resistance

Yu Zhou, D. Jia, Baoqiang Li, 2020 .

Dynamical electric and magnetic responses in the Bi0.85Nd0.15FeO3 ceramic with morphotropic phase boundary

Yu Zhou, Fangzhe Li, D. Jia, 2021 .

Construction of hollow tellurium hierarchical architecture via a trisodium citrate assisted self-sacrificed template eroding mechanism

D. Jia, Gang Chen, Jingxue Sun, 2014 .

Target-oriented synthesis of high synthetic yield carbon dots with tailored surface functional groups for bioimaging of zebrafish, flocculation of heavy metal ions and ethanol detection

Yu Zhou, D. Jia, Baoqiang Li, 2021 .

3D-printed Lunar regolith simulant-based geopolymer composites with bio-inspired sandwich architectures

Yu Zhou, D. Jia, P. He, 2023, Journal of Advanced Ceramics.

3D Printing of Damage-tolerant Martian Regolith Simulant-based Geopolymer Composites

Yu Zhou, D. Jia, Zuhua Zhang, 2022, Additive Manufacturing.

Printing and electromagnetic characteristics of 3D printing frequency selective surface using graphene

Yu Zhou, D. Jia, Zhe Zhao, 2021, Journal of Materials Science & Technology.

Mechanism of superior luminescent and high-efficiency photocatalytic properties of Eu-doped calcium aluminate by low-cost self-propagating combustion synthesis technique

Yang Zhao, Yu Zhou, D. Jia, 2017, Scientific Reports.

Non-planar vertical photodetectors based on free standing two-dimensional SnS2 nanosheets.

Yu Zhou, D. Jia, P. Hu, 2017, Nanoscale.

First-principles study of the anisotropic thermal expansion and thermal transport properties in h-BN

Zhihua Yang, Yu Zhou, X. Duan, 2020, Science China Materials.

Low Optical Writing Energy Multibit Optoelectronic Memory Based on SnS2 /h-BN/Graphene Heterostructure.

Yu Zhou, D. Jia, P. Hu, 2021, Small.

Thermal expansion and electrochemical properties of Ni-doped GdBaCo2O5+δ double-perovskite type oxides

Yaohui Zhang, D. Jia, Z. Lü, 2010 .

Atomistic insight into the structure and diffusion properties of pollucite glass-ceramics

Yu Zhou, D. Jia, P. He, 2022, Ceramics International.

A visibly transparent radiative cooling film with self-cleaning function produced by solution processing

Yu Zhou, J. Qiu, D. Jia, 2021 .

Fast synthesis of double-directional tellurium submicron needles by microwave-assisted solution method

D. Jia, Gang Chen, Jingxue Sun, 2013 .

Ultrahigh-yield synthesis of N-doped carbon nanodots that down-regulate ROS in zebrafish.

Yu Zhou, D. Jia, Yaming Wang, 2017, Journal of materials chemistry. B.

Controlled growth and optical properties of Al3+ doped ZnO nanodisks and nanorod clusters

D. Jia, Xiu-rong Qu, 2009 .

Large electro-optic response of bulk ferroelectric crystals enhanced by piezoelectric resonance in the high frequency range

Zhongxiang Zhou, Yang Li, Jun Li, 2018 .

Microstructure and Electrical Conductivity of Ni-YSZ Cermets Prepared by Combustion Synthesis Method

D. Jia, Tiesong Lin, K. Sun, 2007 .

Ferroelectrics: Intrinsic Dipole Coupling in 2D van der Waals Ferroelectrics for Gate‐Controlled Switchable Rectifier (Adv. Electron. Mater. 2/2020)

W. Cao, Bin Yang, Yu Zhou, 2020 .

Development of Single‐Chamber Solid Oxide Fuel Cells: Performance Optimization and Micro‐Stack Designs

D. Jia, Z. Lü, Xiqiang Huang, 2010 .

Performances of high voltage electrochemical capacitor using ball-milled graphite/Mn3O4 composite electrodes

Yu Zhou, D. Jia, Yaming Wang, 2012 .

The effect of NaOH concentration on the steam-hydrothermally treated bioactive microarc oxidation coatings containing Ca, P, Si and Na on pure Ti surface.

Yu Zhou, D. Jia, Yaming Wang, 2015, Materials science & engineering. C, Materials for biological applications.

Crystallization Behavior and Multiferroic Properties of Bi3.15Nd0.85Ti3O12/CoFe2O4 Powders Synthesized by Sol–Gel Method

Yu Zhou, D. Jia, Wen Wang, 2016 .

The growth and optical property of ZnO rods evolved from layered basic zinc acetate in humid atmosphere

Zhihua Yang, X. Duan, Wei Liu, 2011 .

Microstructural, electrical and magnetic properties of multiferroic CoFe2O4/0.68Pb(Mg1/3Nb2/3)O3–0.32PbTiO3 nanocomposite thin films

D. Jia, Hai-bo Li, J. Rao, 2011 .

Improvement of grain size and crystallization degree of LPSed h-BN composite ceramics by amorphization/nanocrystallization of raw h-BN powders

Zhihua Yang, Yu Zhou, X. Duan, 2021 .

TEM analysis and in vitro and in vivo biological performance of the hydroxyapatite crystals rapidly formed on the modified microarc oxidation coating using microwave hydrothermal technique

Yu Zhou, D. Jia, Yaming Wang, 2019, Chemical Engineering Journal.

Rapid structural evolution and bone inducing mechanism of the multilayer coating with silicon-doped hydroxyapatite crystals on the microwave water steaming-hydrothermally treated titania coating

Yu Zhou, D. Jia, Yaming Wang, 2021 .

Rapid Fabrication, Microstructure, and in Vitro and in Vivo Investigations of a High-Performance Multilayer Coating with External, Flexible, and Silicon-Doped Hydroxyapatite Nanorods on Titanium.

Yu Zhou, D. Jia, Yaming Wang, 2019, ACS biomaterials science & engineering.

MC3T3-E1 cell response of amorphous phase/TiO2 nanocrystal composite coating prepared by microarc oxidation on titanium.

Yu Zhou, D. Jia, Yaming Wang, 2014, Materials science & engineering. C, Materials for biological applications.

Effect of dehydration on structure and induction capability for apatite formation of microarc oxidized TiO2-based film with chemical modification

Yu Zhou, D. Jia, Yaming Wang, 2008 .

Chemical etching of micro-plasma oxidized titania film on titanium alloy and apatite deposited on the surface of modified titania film in vitro

Yu Zhou, D. Jia, Yaming Wang, 2008 .

Influence of Applied Voltage on the Structure of Micro-Plasma Oxidized Titania-Based Coatings Formed in an Electrolyte Containing Nano-HA and Calcium Salts and Phosphate

Yu Zhou, D. Jia, Daqing Wei, 2008 .

Effect of heat treatment atmosphere on the structure and apatite-inducing ability of Ca, P, Si and Na incorporated microarc oxidation coating on titanium

Yu Zhou, D. Jia, Yaming Wang, 2017 .

Hierarchical Superhydrophilic/Superaerophobic 3D Porous Trimetallic (Fe, Co, Ni) Spinel/Carbon/Nickel Foam for Boosting Oxygen Evolution Reaction

Yu Zhou, D. Jia, Yaming Wang, 2023, Applied Catalysis B: Environmental.

3D printing of green and environment-friendly rGO@ZnO/GP for removal of methylene blue from wastewater

Yu Zhou, Meirong Wang, D. Jia, 2022, Journal of Physics and Chemistry of Solids.

Sintering mechanism and dielectric properties of LiTaO3 matrix composites with the addition of Al2O3 particles

Yu Zhou, D. Jia, Yan’gai Liu, 2009 .

Effect of Al 2 O 3 Content on Dielectric Properties of Al 2 O 3 /LiTaO 3 Composite Ceramics: Effect of Al 2 O 3 Content on Dielectric Properties of Al 2 O 3 /LiTaO 3 Composite Ceramics

Yu Zhou, D. Jia, Youfeng Zhang, 2009 .

Effect of Sintering Process on Microstructure of Al2O3/LiTaO3 Composite Ceramics

Yu Zhou, D. Jia, Youfeng Zhang, 2007 .

Enhanced high-temperature oxidation resistance of HfSi2-modified silicon based multilayer ceramic coating on Nb alloy prepared by a novel strategy

Yu Zhou, D. Jia, Guoliang Chen, 2023, Journal of the European Ceramic Society.

Effects of the amount of ferrocene and ammonium chloride on the diameter distribution of hollow carbon spheres synthesized in high-pressure argon

D. Jia, Y. Shao, B. Liu, 2010 .

Near unity broadband emissivity and ultralow thermal conductivity from yttrium niobate-based ceramics

Yu Zhou, D. Jia, Guoliang Chen, 2023, Chemical Engineering Journal.

Ca-Mn co-doping LaCrO3 coating with high emissivity and good mechanical property for enhancing high-temperature radiant heat dissipation

D. Jia, Guoliang Chen, Yaming Wang, 2022, Journal of the European Ceramic Society.

Microstructure, Thermal Conductivity, and Temperature-Dependent Infrared Emissivity of Divalent Transition Metal Ions Doped A-Cordierite Ceramics

Yu Zhou, Yufeng Zhang, D. Jia, 2022, SSRN Electronic Journal.

Mechanical properties and fracture behavior of SiCw reinforced Al–12Ti alloy prepared by bechanical alloying technique

D. Jia, Y. Zhou, 1998 .

Dual‐Channel Dielectric Tunability in Highly Textured BaTi0.99Fe0.01O3−δ Ceramics With Micro‐Twin Boundary

Yu Zhou, Fangzhe Li, D. Jia, 2023, Advanced Electronic Materials.

Influence of sintering temperature on the crystallization and mechanical properties of BN‐MAS composites

D. Jia, Daxin Li, Yu Zhou, 2022, Journal of The American Ceramic Society.

In situ TEM observation of crack propagation in LiTaO3 particle toughened Al2O3 ceramics

M. Fang, Zhaohui Huang, D. Jia, 2011 .

Sintering Behavior of Gehlenite, Part II. Microstructure and Mechanical Properties

D. Jia, W. Kriven, 2007 .

Large-size Si3N4 ceramic fabricated by additive manufacturing using long-term stable hydrogel-based suspensions

Zhihua Yang, Yu Zhou, D. Jia, 2023, Additive Manufacturing.

Mineralization of Magnetite Induced by Chitosan Hydrogel

Yong Liang Wang, Yu Zhou, D. Jia, 2010 .

In Situ Mineralization of Magnetite Nanoparticles in Chitosan Hydrogel

Yu Zhou, D. Jia, Baoqiang Li, 2009, Nanoscale research letters.

A Promising Radiation Thermal Protection Coating Based on Lamellar Porous Ca‐Cr co‐Doped Y3NbO7 Ceramic

Yu Zhou, D. Jia, Guoliang Chen, 2023, Advanced Functional Materials.

One-step fabrication of amorphous/ITO-CNTs coating by plasma electrolytic oxidation with particle addition for excellent wear resistance

Yu Zhou, D. Jia, Guoliang Chen, 2023, Applied Surface Science.

MICROSTRUCTURE AND ELECTROCONDUCTIVITY OF TiN-Al2O3 COMPOSITES PREPARED BY HOT-PRESSING

Yu Zhou, X. Duan, D. Jia, 2012 .

Efficiently Synergistic Hydrogen Evolution Realized by Trace Amount of Pt-Decorated Defect-Rich SnS2 Nanosheets.

Zhiguo Wang, Yu Zhou, D. Jia, 2017, ACS applied materials & interfaces.

UV-crosslinkable and thermo-responsive chitosan hybrid hydrogel for NIR-triggered localized on-demand drug delivery.

Yu Zhou, D. Jia, Yaming Wang, 2017, Carbohydrate polymers.

Controlled growth of six-point stars MoS2 by chemical vapor deposition and its shape evolution mechanism

D. Jia, P. Hu, Yunfeng Qiu, 2017, Nanotechnology.

Thermal shock damage assessment of a BNW/SiO2 ceramic: Insight from temperature-dependent material properties

Zhihua Yang, Yu Zhou, D. Jia, 2021, Ceramics International.

Effect of P/Al ratio on an acid aluminum phosphate solution: Thermal evolution and hygroscopic behavior

Yu Zhou, D. Jia, P. He, 2023, Journal of Alloys and Compounds.

In-situ construction of plasma-pretreated CNT networks endow the LPDS dual-layer coating with advanced thermal management and anti-static properties

Yu Zhou, D. Jia, Guoliang Chen, 2023, Ceramics International.