J. Leng

发表

Reinforced and toughened PP/PS composites prepared by Fused Filament Fabrication (FFF) with in-situ microfibril and shish-kebab structure

L. Cardon, Yixin Jiang, Junjie Wu, 2020 .

Tailored crystalline structure and enhanced impact strength of isotactic polypropylene/high-density polyethylene blend by controlling the printing speed of fused filament fabrication

J. Leng, Jie Zhang, Xuanbo Gu, 2020, Journal of Materials Science.

Introduction and Summary 1 Symbols 6 Similitude and Substitute Gases 10 Similitude Parameters 11 Substitute Gases 17 Mixing Layer Similitude 27

J. Leng, 2008 .

Droplet Microfluidics to Prepare Magnetic Polymer Vesicles and to Confine the Heat in Magnetic Hyperthermia

D. Habault, Olivier Sandre, J. Leng, 2012, IEEE Transactions on Magnetics.

A high-efficiency way to improve the shape memory property of 4D-printed polyurethane/polylactide composite by forming in situ microfibers during extrusion-based additive manufacturing

Yixin Jiang, J. Leng, Jie Zhang, 2020 .

The effect of the viscosity-dependent boundary layer on tight oil flow behavior in CO2 Huff-Puff processes: A unified dimensional Pre-Darcy flow model

J. Leng, R. Jiang, Qiong Wang, 2021 .

Experimental characterization of 3D printed PP/h-BN thermally conductive composites with highly oriented h-BN and the effects of filler size

Yixin Jiang, J. Leng, Jie Zhang, 2021 .

The electrochemical performance of AB5H6 as anode material for lithium-ion batteries

J. Leng, Liwu Huang, Xiaoren Zhou, 2021, Ionics.

Polymer-Controlled Synthesis of 1-(2-Pyridylazo)-2-Naphthol Hierarchical Architectures

J. Leng, Hua-ming Li, Yong Gao, 2011 .

Synergic Enhancement of High-density Polyethylene through Ultrahigh Molecular Weight Polyethylene and Multi-flow Vibration Injection Molding: A Facile Fabrication with Potential Industrial Prospects

Q. Fu, Yixin Jiang, J. Leng, 2021, Chinese Journal of Polymer Science.

Evolution of iPP/HDPE Morphology under Different Mold Temperatures via Multiflow Vibration Injection Molding: Thermal Field Simulation and Oriented Structures

Q. Fu, J. Leng, Jie Zhang, 2020 .

Two-step approach based on selective laser sintering for high performance carbon black/ polyamide 12 composite with 3D segregated conductive network

Junjie Wu, J. Leng, Jie Zhang, 2019, Composites Part B: Engineering.

Preparation of Thermoplastic Polyurethane Parts Reinforced with in Situ Polylactic Acid Microfibers during Fused Deposition Modeling: The Influences of Deposition-Induced Effects

Junjie Wu, J. Leng, Jie Zhang, 2019, Industrial & Engineering Chemistry Research.

Study on Combustion Characteristics of Lignite in a CFB Boiler

J. Leng, T. Zou, J. Wu, 2009 .

The effect of hydrogen and propane addition on the operation of a natural gas-fired pulsed combustor☆

J. Leng, H. Jones, 1994 .

Droplet Microfluidics to Prepare Magnetic Polymer Vesicles and to Confine the Heat in Magnetic Hyperthermia

D. Habault, Olivier Sandre, J. Leng, 2012, IEEE Transactions on Magnetics.

The influence of fuel composition on emissions of CO, NO, and NO2 from a gas-fired pulsed combustor

J. Leng, H. Jones, 1996 .

An experimental investigation into the wave power extraction of a floating box-type breakwater with dual pneumatic chambers

Jie Leng, Fang He, Xizeng Zhao, 2017 .

Extrusion‐Based Additive Manufacturing Samples with Desirable Thermal Conductivities Prepared by Incorporating Hybrid Hexagonal Boron nitride(h‐BN) and Novel Process Strategy

Yixin Jiang, J. Leng, Jie Zhang, 2021, Macromolecular Materials and Engineering.

Enhancing thermal conductivity and balancing mechanical properties of 3D-printed iPP/HDPE-based dielectric composites via the introduction of hybrid fillers and tailored crystalline structure

L. Cardon, J. Zhang, Peng Wang, 2023, Virtual and Physical Prototyping.