C. Pan

发表

Polyvinylidene Fluoride-Added Ceramic Powder Composite Near-Field Electrospinned Piezoelectric Fiber-Based Low-Frequency Dynamic Sensors

Satya P. Singh, Dongqing Wei, Xiaofeng Dai, 2020, ACS omega.

Significant piezoelectric and energy harvesting enhancement of poly(vinylidene fluoride)/polypeptide fiber composites prepared through near-field electrospinning

Chung-Kun Yen, Liwei Lin, Cheng-Tang Pan, 2015 .

Near-field electrospinning enhances the energy harvesting of hollow PVDF piezoelectric fibers

Chung-Kun Yen, Liwei Lin, Cheng-Tang Pan, 2015 .

Design and Fabrication of Electrospun PVDF Piezo-Energy Harvesters

Liwei Lin, Ying-Chung Chen, C. Pan, 2013 .

Study of the drug fiber for wound healing by direct-writing near field electrospinning with subdivision control

C. Pan, C. Yen, S. Kuo, 2017, 2017 International Conference on Applied System Innovation (ICASI).

Development of a rotary electromagnetic microgenerator

C. Pan, T. T. Wu, 2006 .

Development of a rotary electromagnetic microgenerator

C. Pan, T. T. Wu, 2007 .

Analysis of an in-plane micro-generator with various microcoil shapes

Cheng-Tang Pan, Y. J. Chen, Y. J. Chen, 2013 .

Simulation and analysis of electromagnetic in-plane microgenerator

Sheng-Chih Shen, Cheng-Tang Pan, Y. J. Chen, 2009 .

Application of low temperature co-fire ceramics on in-plane micro-generator

Cheng-Tang Pan, Y. J. Chen, Y. J. Chen, 2008 .

Design and Fabrication of Flexible Piezoelectric Generators Based on ZnO Thin Films

Liwei Lin, Ying-Chung Chen, C. Pan, 2013 .

Design and fabrication of flexible piezo-microgenerator by depositing ZnO thin films on PET substrates

Cheng-Tang Pan, Ying-Chung Chen, C. Pan, 2010 .

Application of optical film with micro-lens array on a solar concentrator

Cheng-Tang Pan, Y. J. Chen, J. K. Tseng, 2011 .

A parametric study on synthesis of Ag nanowires with high aspect ratio

Cheng-Tang Pan, T. L. Yang, C. Pan, 2017, Journal of Materials Science: Materials in Electronics.

Synthesis and fabrication of silver nanowires embedded in PVP fibers by near-field electrospinning process

T. L. Yang, Liwei Lin, Ying-Chung Chen, 2015 .

A low-temperature wafer bonding technique using patternable materials

Hsiharng Yang, H. Chou, C. Pan, 2002 .

Dynamic characterization of silicon-based microstructure of high aspect ratio by dual-prism UV laser system

C. Pan, Y. Hwang, C. Hsieh, 2005 .

A flexible sensing device based on a PVDF/MWCNT composite nanofiber array with an interdigital electrode

Liwei Lin, Cheng-Tang Pan, Liwei Lin, 2014 .

Design and fabrication of sub-micrometer eight-level bi-focal diffraction optical elements

C. Pan, 2004 .

Design and fabrication of double-sided optical film for OLED lighting

Chien-Jang Wu, Cheng-Tang Pan, Chien-Jang Wu, 2013 .

Study of reflection-typed LED surgical shadowless lamp with thin film Ag-based metallic glass

Y. C. Chen, T. L. Yang, J. C. Huang, 2016 .

Study of cutting quality for TFT-LCD glass substrate

Cheng-Tang Pan, Chi-Chang Hsieh, C. Hsieh, 2008 .

Development of MMG sensors using PVDF piezoelectric electrospinning for lower limb rehabilitation exoskeleton

Y. Shiue, C. Pan, C. Yen, 2020 .

Embedded dots inside glass for optical film using UV laser of ultrafast laser pulse

C. Pan, Z. H. Liu, Y. Wu, 2011 .

A study of the geometry of microball lens arrays using the novel batch-fabrication technique

C. Chien, C. Hsieh, C. Pan, 2005 .

Electromagnetic optical switch for optical network communication

Cheng-Tang Pan, Hwai-Pwu Chou, H. Chou, 2002 .

Technique of microball lens formation for efficient optical coupling.

C. Chien, C. Hsieh, C. Pan, 2004, Applied optics.

Excimer laser-induced formation of metallic microstructures by electroless copper plating

Hsiharng Yang, C. Pan, C. Pan, 2002 .

Fabrication of optical disk mastering using electron beam and embossing process

C. Pan, Yung-Kuang Chen, S. Lo, 2007 .

Study of micro-lens array by reflow process

C. Pan, C. Pan, C. Su, 2008 .

Design and Fabrication of Vibration-Induced Electromagnetic Microgenerators

Liwei Lin, Ying-Chung Chen, C. Pan, 2013 .

Selective electroless copper plating micro-coil assisted by 248 nm excimer laser

C. Pan, 2004 .

Fabrication of light extraction efficiency of organic light-emitting diodes with 3D aspherical microlens by using dry etching process

Ying-Chung Chen, C. Hsieh, C. Pan, 2013 .

Fabrication of an Aspherical Microlens for OLED with Modified Etching Process

C. Pan, Y. Hwang, S. Shen, 2010, 2010 International Conference on Electrical and Control Engineering.

Microstructural revolution of CIGS thin film using CuInGa ternary target during sputtering process

C. Pan, C. Su, Yuquan Ding, 2012 .

Effect of O2/Ar Gas Flow Ratios on Properties of Cathodic Vacuum Arc Deposited ZnO Thin Films on Polyethylene Terephthalate Substrate

C. Pan, Chien-Wei Huang, Ru‐Yuan Yang, 2016 .

Study of deep X-ray lithography behaviour for microstructures

Chyan-Chyi Wu, C. Pan, T. T. Wu, 2008 .

Study on the delamination of composite materials and metals in PBGA and LFBGA

C. Pan, C.K. Ho, S. Chen, 2017, 2017 International Conference on Applied System Innovation (ICASI).

Nickel electroforming with 355 nm UV laser process applied to 4G solidly mounted resonator packaging

Y. C. Chen, C. Pan, Z. H. Liu, 2016, 2016 International Conference on Applied System Innovation (ICASI).

New NaSrPO4:Sm3+ phosphor as orange-red emitting material

C. Pan, Ru‐Yuan Yang, M. Weng, 2016, Bulletin of Materials Science.

Effect of different sintering method on the microstructure and photoluminescent properties of NaSrPO4:Tb3 + phosphors

C. Pan, Ru‐Yuan Yang, M. Weng, 2016 .

Microstructure, luminescence and thermal stability properties of NaSrPO4:Tb3+ phosphors with various doping concentrations prepared using conventional solid-state sintering

C. Pan, Ru‐Yuan Yang, C. Hung, 2013 .

Optimization of the spherical integrity for sustained-release alginate microcarriers-encapsulated doxorubicin by the Taguchi method

Cheng-Tang Pan, Y. Shiue, C. Pan, 2020, Scientific Reports.

Structure, optical and electrical properties of ZnO thin films on the flexible substrate by cathodic vacuum arc technology with different arc currents

C. Pan, C. Huang, Ru‐Yuan Yang, 2011 .

Study on comparing WO3 and W18O49 gas sensing abilities under NO2 environment

C. Pan, C. Su, Y. C. Luo, 2017 .

Investigation of the anti-adhesion layers for nanoimprint molding

T. L. Yang, C. Pan, S. Shen, 2017 .

Study on Anti-Adhesion Layers Using AFM for Nanoimprint Process

T. L. Yang, C. Pan, P. Ni, 2015 .

Oxygen partial pressure effect on the preparation of nanocrystalline tungsten oxide powders by a plasma arc gas condensation technique

C. Pan, C. Lin, C. Su, 2008 .

Fabrication of an 3D aspherical microlens for OLED with PDMS modified using a dry etching process

C. Pan, W. Li, Y. Chen, 2013 .

Selective low temperature microcap packaging technique through flip chip and wafer level alignment

C. Pan, 2004 .

Fabrication of integrated nozzle plates for inkjet print head using microinjection process

C. Pan, S. Shen, C. C. Chang, 2006 .

Three-Dimensional Micro-Flow Measurement in a Capillary with a Diode Laser Micro-Particle Image Velocitometry

P. J. Cheng, H. Chuang, C. Pan, 2006 .

Effects of Stoichiometry on Structural, Morphological and Nanomechanical Properties of Bi2Se3 Thin Films Deposited on InP(111) Substrates by Pulsed Laser Deposition

Vanthan Nguyen, C. Pan, Y. Hwang, 2020, Coatings.

Size-Dependent Thermal Behaviors of 5-Fold Twinned Silver Nanowires: A Computational Study

C. Pan, Chengsi Huang, S. Ju, 2016 .

Large-Area Piezoelectric PVDF Fibers Fabricated by Near-Field Electrospinning with Multi-Spinneret Structures †

Yanhong Lin, C. Pan, Shao-Yu Wang, 2017, Micromachines.

Fibers and conductive films using silver nanoparticles and nanowires by near-field electrospinning process

T. L. Yang, C. Pan, S. Shen, 2015 .

Effect of the Bias Voltage on the Structure, Mechanical, Electronic and Optical Properties of the Low Temperature ZnO Thin Films Deposited by Using Cathodic Vacuum Arc Deposition System on Plastic Substrates

C. Pan, Chien-Wei Huang, Ru-Yuan Yang, 2013 .

Properties of low-temperature deposited ZnO thin films prepared by cathodic vacuum arc technology on different flexible substrates

C. Pan, Chien-Wei Huang, Ru‐Yuan Yang, 2013 .

A Misalignment Optical Guiding Module for Power Generation Enhancement of Fixed-Type Photovoltaic Systems

C. Pan, Shao-Yu Wang, C. Yen, 2019, Micromachines.

Study of interface mechanical properties between thin-film Au and polymethyl methacrylate

C. Pan, S. Shen, Chun-Yu Lin, 2008 .

Study of scratching Mg-based BMG using nanoindenter with Berkovich probe

Cheng-Tang Pan, J. C. Huang, C. Pan, 2010 .

TSV by 355 UV laser for 4G component packaging with micro-electroforming

S. Y. Wang, Y. C. Chen, C. T. Pan, 2017, Microelectron. Reliab..

Fabrication of various dimensions of high fill-factor micro-lens arrays for OLED package

Cheng-Tang Pan, M. F. Chen, C. Pan, 2010 .

Ultra-fine machining tool/molds by LIGA technology

Hsiharng Yang, Cheng-Tang Pan, M.-C. Chou, 2001 .

Wet Deposition Process for Thin-Film Transistors

S. Lin, C. Pan, S. Shen, 2014 .

Microstructure and mechanical properties of open-cell porous Ti-6Al-4V fabricated by selective laser melting

T. L. Yang, J. C. Huang, Che-Hsin Lin, 2017 .

Al2O3/SUS304 Brazing via AgCuTi-W Composite as Active Filler

C. Pan, C. Su, Xie-Zongyang Zhuang, 2014, Journal of Materials Engineering and Performance.

Ultrasonic sensing device with ZnO piezoelectric nanorods by selectively electrospraying method

W. C. Wang, Che-Hsin Lin, Ying-Chung Chen, 2014 .

Energy harvesting with piezoelectric poly(γ-benzyl-L-glutamate) fibers prepared through cylindrical near-field electrospinning

Liwei Lin, C. Pan, C. Yen, 2014 .

Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting

T. L. Yang, Che-Hsin Lin, C. Pan, 2017 .

Vein Pattern Locating Technology for Cannulation: A Review of the Low-Cost Vein Finder Prototypes Utilizing near Infrared (NIR) Light to Improve Peripheral Subcutaneous Vein Selection for Phlebotomy

Chung-Kun Yen, Cheng-Tang Pan, Shao-Yu Wang, 2019, Sensors.

Energy Harvesters Incorporating Silk from the Taiwan-Native Spider Nephila pilipes

Liwei Lin, M. Hsieh, Y. Shiue, 2018, ACS Applied Energy Materials.

Flexible Piezoresistive Tactile Sensor Based on Polymeric Nanocomposites with Grid-Type Microstructure

C. Chuang, C. Pan, Shao-Yu Wang, 2021, Micromachines.

Fabrication and design of various dimensions of multi-step ashperical microlens arrays for OLED package

M. F. Chen, C. Pan, Yi-Cheng Hsu, 2011 .

Investigation of the microstructure and characterizations of TiN/CrN nanomultilayer deposited by unbalanced magnetron sputter process

P. Chen, C. Pan, C. Lin, 2008 .

Piezoelectric properties of PVDF/MWCNT nanofiber using near-field electrospinning

Liwei Lin, Cheng-Tang Pan, H. W. Lai, 2013 .

Improvement of Model Predictive Current Control Sensing Strategy for a Developed Small Flux-Switching Permanent Magnet Motor

Chung-Kun Yen, Jyun-Yi Wu, Roger Cheng-Lung Lee, 2020, Sensors.

Wet processes for conductive layer of silver and insulating layer Al2O3 for thin-film transistor

Y. J. Chen, C. F. Liu, C. T. Pan, 2011, 2011 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Investigation of microstructure and mechanical properties of polyvinylidene fluoride/carbon nanotube composites after electric field polarization: A molecular dynamics study

C. Pan, S. Ju, Hui-Lung Chen, 2018, Computational Materials Science.

Hot embossing of micro-lens array on bulk metallic glass

Cheng-Tang Pan, J. C. Huang, M. F. Chen, 2008 .

Finite element simulation of micro-imprinting in Mg–Cu–Y amorphous alloy

M. F. Chen, C. J. Lee, C. Pan, 2009 .

A novel method to fabricate gapless hexagonal micro-lens array

Sheng-Chih Shen, Cheng-Tang Pan, M. F. Chen, 2005 .

Fabrication of aspheric surface using ultraprecision cutting and BMG molding

Cheng-Tang Pan, Yung-Tien Liu, J. C. Huang, 2009 .

Fabrication of gapless dual-curvature microlens as a diffuser for a LED package

P. J. Cheng, M. F. Chen, C. Pan, 2009 .

Design of Customize Interbody Fusion Cages of Ti64ELI with Gradient Porosity by Selective Laser Melting Process

Che-Hsin Lin, C. Kuo, Jacob C. Huang, 2021, Micromachines.

Low-temperature deposited ZnO thin films on the flexible substrate by cathodic vacuum arc technology

C. Hsiung, C. Pan, Ru‐Yuan Yang, 2011 .

Study of vibration-induced broadband flexible piezoelectric ZnO micro-harvester with storage system

W.T. Chang, C. Pan, Y.C. Chen, 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference.

Study on optical films with AgNWs using UV laser patterning

T. L. Yang, Y. Shiue, C. Pan, 2018 .

Thermal conductivity and stability for ultrathin SiO2 nanowires: insight from molecular dynamics simulation

C. Pan, S. Ju, C. Su, 2019, Materials Research Express.

Development of Multi-Axis Crank Linkage Motion System for Synchronized Flight Simulation with VR Immersion

Cheng-Tang Pan, Pei-Yuan Sun, Yow-Ling Shiue, 2021, Applied Sciences.

Influence of twice-deposited etching mask layers on verticality of nanostructures

C. Liu, C. Pan, Z. H. Liu, 2012 .

The extent of laser-induced thermal damage of UD and crossply composite laminates

Eckart Uhlmann, Hong Hocheng, G. Spur, 1999 .

The anisotropic heat-affected zone in the laser grooving of fiber-reinforced composite material

H. Hocheng, C. Pan, 1996 .

Laser Machining and its Associated Effects

H. Hocheng, C. Pan, 2013 .

Development a multi-loop modulation method on the servo drives for lower limb rehabilitation exoskeleton

Cheng-Tang Pan, Chun-Chieh Chang, Yu-Sheng Yang, 2020 .

Study of broad bandwidth vibrational energy harvesting system with optimum thickness of PET substrate

Cheng-Tang Pan, Ying-Chung Chen, C. Pan, 2012 .

Development and fabrication of an LTCC multilayer coil inducer in a vibration-based electromagnetic meso-generator

C. T. Pan, W. L. Lu, Y. M. Hwang, 2010, Microelectron. J..

Influence of Post-Annealing on the Structural and Nanomechanical Properties of Co Thin Films

C. Pan, Y. Hwang, J. Juang, 2020, Micromachines.

Mechanical properties of piezoelectric PVDF/MWCNT fibers prepared by flat/hollow cylindrical near-field electrospinning process

C. T. Pan, J. C. Huang, Z. H. Liu, 2013, The 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Crystallization and mechanical behavior of the ferroelectric polymer nonwoven fiber fabrics for highly durable wearable sensor applications

Liwei Lin, C. Pan, C. Yen, 2015 .

Deformation behaviors of Au nanotubes under torsion by molecular dynamics simulations

C. Pan, Y. Hwang, J. Juang, 2018, AIP Advances.

Lens of controllable optical field with thin film metallic glasses for UV-LEDs.

Y. C. Chen, C. Pan, P. Lin, 2014, Optics express.

Nanoindentation evaluation of cathodic vacuum arc deposited ZnO film on PET substrate

C. Pan, Chien-Wei Huang, Ru‐Yuan Yang, 2016 .

Piezoelectricity of Well-Aligned Electrospun Fiber Composites

C. Pan, Zong-Hsin Liu, Z. Ou, 2013, IEEE Sensors Journal.

The development of polycaprolactone (PCL) microcarriers with an emulsification module by ultrasonic spraying

H. Lin, C. Pan, Zong-Hsin Liu, 2019 .

Electrospun PVDF fibers on bio-wings using multi-spinnerets

Y. L. Lin, Liwei Lin, C. Pan, 2014, The 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).

Study on piezoelectric properties of near-field electrospinning PVDF/MWCNT nano-fiber

Y. J. Chen, C. T. Pan, Y. J. Chen, 2012, 2012 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).

Micro-flow measurement with a laser diode micro-particle image velocimetry

H. Chuang, C. Pan, C. T. Yang, 2004 .

A 40-nm CMOS Piezoelectric Energy Harvesting IC for Wearable Biomedical Applications

Ya-Hsin Hsueh, Chua-Chin Wang, Lean Karlo S. Tolentino, 2021, Electronics.

A PVDF-film Energy Harvesting Circuit Using 40-nm CMOS Process

Y. Hsueh, J. Hizon, C. Pan, 2020, 2020 2nd International Conference on Smart Power & Internet Energy Systems (SPIES).

Numerical Analysis of the Welding Behaviors in Micro-Copper Bumps

C. Pan, Y. Hwang, S. Jian, 2021, Metals.

Design of Interbody Fusion Cages of Ti6Al4V with Gradient Porosity Using a Selective Laser Melting Process for Spinal Fusion Arthroplasty

T. L. Yang, Che-Hsin Lin, C. Pan, 2017 .

Design and fabrication of LTCC electro-magnetic energy harvester for low rotary speed

Cheng-Tang Pan, Yun-An Chen, Zin-Huang Liu, 2013 .

Design and fabrication compound diffuser film with LIGA-like process

M. F. Chen, C. Pan, Y. Hwang, 2011 .

Design and Fabrication of Rotary Electromagnetic Microgenerator

Liwei Lin, Ying-Chung Chen, Cheng-Tang Pan, 2013 .

Energy harvester made of Taiwan local Nephila pilipes spider silk

M. Hsieh, Y. Shiue, C. Chien, 2017, 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS).

Development of Multi-axis Motor Control Systems for Lower Limb Robotic Exoskeleton

Cheng-Lung Lee, Tzu-Chieh Lin, Chung-Kun Yen, 2018, Journal of Medical and Biological Engineering.

Polyvinylidene Fluoride-Added Ceramic Powder Composite Near-Field Electrospinned Piezoelectric Fiber-Based Low-Frequency Dynamic Sensors

Dongqing Wei, Xiaofeng Dai, M. T. Khan, 2020, ACS omega.

Polyimide as the pedestal of batch fabricated micro-ball lens and micro-mushroom array

Cheng-Tang Pan, Shih-Chou Chen, C. Pan, 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

Compound Optical Film Using Gray Scale Mask Embedded with Microvoids

Y. J. Chen, Y. C. Chen, W. C. Wang, 2012 .

Evaluation of anisotropic thermal conductivity for unidirectional FRP in laser machining

Hong Hocheng, Cheng-Tang Pan, H. Hocheng, 2001 .

The effect of deposition parameters and post treatment on the electrical properties of Mo thin films

C. Pan, C. Su, P. Peng, 2012 .