J. Yun

发表

High surface area flexible zeolite fibers based on a core-shell structure by a polymer surface wet etching process

S. Ji, Kyung Won Kim, Bok Seong Park, 2018, Materials & Design.

Fabrication and Energy Harvesting Characteristics of Water Energy Harvester Using Piezoelectric Ceramic Bimorph Cantilever

Y. H. Jeong, S. Nahm, J. Yun, 2012 .

Complex Permeability of 0-3 Polymer Magnetic Composites for Near-Field Communication

Y. H. Jeong, J. Yun, Jeong–Ho Cho, 2012 .

Development and Evaluation of the Bender Type Piezoelectric Energy Harvester According to Installation Methods and Vehicle Weight

Y. H. Jeong, J. Yun, Chang-I. Kim, 2016 .

Energy Harvesting Characteristics of Interdigitated (IDT) Electrode Pattern Embedded Piezoelectric Energy Harvester

W. Park, Y. H. Jeong, J. Yun, 2016 .

Optimization of a flexible piezoelectric module structure based on a lead-free piezoceramic embedded in nanofiber composites

S. Ji, J. Yun, 2020 .

Experimental and theoretical investigations of the rheological and electrical behavior of nanocomposites with universal percolation networks

S. Ji, J. Yun, Doojin Lee, 2021, Composites Part B: Engineering.

High energy-density 0.72Pb(Zr0.47Ti0.53)O3-0.28Pb[(Zn0.45Ni0.55)1/3Nb2/3]O3 thick films fabricated by tape casting for energy-harvesting-device applications

Y. H. Jeong, S. Nahm, J. Yun, 2013 .

Optimization and characterization of high-viscosity ZrO2 ceramic nanocomposite resins for supportless stereolithography

M. Park, J. Yun, J. W. Lee, 2019, Materials & Design.

Ferroelectric properties and core shell domain structures of Fe-modified 0.77Bi0.5Na0.5TiO3-0.23SrTiO3 ceramics

W. Park, Y. H. Jeong, J. Yun, 2017 .

A-site Non-stoichiometric Effects of Bi 0.5 (Na 0.78 K 0.22 ) 0.5 TiO 3 Ceramics on the Dielectric and Electrical Properties

Y. H. Jeong, J. Yun, Jeong–Ho Cho, 2014 .

The effect of PVP contents on the fiber morphology and piezoelectric characteristics of PZT nanofibers prepared by electrospinning

Y. H. Jeong, J. Yun, Jeong–Ho Cho, 2014 .

Development of multicolor 3D-printed 3Y-ZrO2 sintered bodies by optimizing rheological properties of UV-curable high-content ceramic nanocomposites

M. Park, S. Ji, J. Yun, 2021 .

Recent Research Trends of Flexible Piezoelectric Nanofibers for Energy Conversion Materials

S. Ji, J. Yun, 2019, Ceramist.

Highly Porous-Cellulose-Acetate-Nanofiber Filters Fabricated by Nonsolvent-Induced Phase Separation during Electrospinning for PM2.5 Capture

S. Ji, J. Yun, 2022, Nanomaterials.

High performance of temperature sensitive thin film fabricated onto flexible substrates

D. Yoon, J. Yun, C. Jeon, 2016 .

Characterization of ternary (Ni,Co,Mn)3O4 thin films for microbolometer applications

D. Yoon, J. Yun, C. Jeon, 2015 .

Electric field induced polarization and strain of (Bi1/2Na1/2)TiO3–BaTiO3 ceramics

J. Yun, C. Jeon, Ku‐Tak Lee, 2015 .

Effect of chemical inhomogeneity on domains and ferroelectric properties of Fe‐modified 0.77Bi0.5Na0.5TiO3–0.23SrTiO3

J. Yun, J. Paik, C. Jeon, 2018 .

Designing an interpenetrating network of silane-functionalized nanocomposites for enhanced particle dispersity and interfacial bonding strength

J. Yun, Doojin Lee, Yeeun Song, 2021, Ceramics International.

Fabrication and Electric Properties of Piezoelectric Cantilever Energy Harvesters Driven in 3-3 Vibration Mode

W. Park, J. Yun, Chang-I. Kim, 2017 .

Development of ceramic-reinforced photopolymers for SLA 3D printing technology

J. Yun, Y. Jeong, Jeong-ho Cho, 2016, Applied Physics A.

Fracture Toughness and Electrical Properties of 0.975Bi(Na0.78K0.22)TiO3–0.025BiAlO3 Ceramics

Y. Park, J. Yun, J. Nam, 2013 .

Poling effects on the performance of a lead-free piezoelectric nanofiber in a structural health monitoring sensor

S. Ji, J. Yun, J. Paik, 2017 .

Sintering and optical properties of transparent ZnS ceramics by pre-heating treatment temperature

J. Yun, Chang-I. Kim, J. Paik, 2018, Journal of Electroceramics.

Structure and Electrical Properties of 0.85NaNbO 3 -0.15LiNbO 3 Ceramics

J. Yun, J. Paik, C. Jeon, 2014 .

Phase transition and piezoelectric properties of lead-free (Bi1/2Na1/2)TiO3–BaTiO3 ceramics

Y. Park, J. Yun, J. Nam, 2014 .

Improvement of dispersion stability and 3D-printing characteristics of ceramics in photopolymers by controlling the coating thickness of silane coupling agents

M. Park, J. Yun, J. W. Lee, 2018, Materials Chemistry and Physics.

Liquid flow deposited spinel (Ni,Mn) 3 O 4 thin films for microbolometer applications

D. Yoon, J. Yun, C. Jeon, 2015 .

Current-Voltage and Impedance Characteristics of ZnO-Zn2BiVO6-Co3O4Varistor with Temperature

W. Park, J. Yun, J. Paik, 2016 .

Sintering Process Optimization for 3YSZ Ceramic 3D-Printed Objects Manufactured by Stereolithography

M. Park, S. Ji, J. Yun, 2021, Nanomaterials.

Optimizing the printability and dispersibility of functionalized zirconium oxide/acrylate composites with various nano-to micro-particle ratios

J. Yun, Doojin Lee, Yangyul Ju, 2020 .

Development of ceramic-reinforced photopolymers for SLA 3D printing technology

J. Yun, Y. Jeong, Jeong-ho Cho, 2016 .

Bi-scale interfacial bond behaviors of CCF/PEEK composites by plasma-laser cooperatively assisted 3D printing process

Dichen Li, Weijun Zhu, J. Yun, 2020 .

A Study on the Rheological and Mechanical Properties of Photo-Curable Ceramic/Polymer Composites with Different Silane Coupling Agents for SLA 3D Printing Technology

M. Park, J. Yun, J. W. Lee, 2018, Nanomaterials.

Phase transition and electrical characteristics of Bi0.5(Na0.78K0.22)0.5TiO3–BiFeO3 lead-free piezoelectric ceramics

J. Yun, J. Paik, Ku‐Tak Lee, 2015 .

All-in-one Piezo-triboelectric Energy Harvester Module based on Piezoceramic Nanofibers for Wearable Devices.

Wooyoung Lee, Ji Sun Yun, Sang Hyun Ji, 2020, ACS applied materials & interfaces.

Flexible lead-free piezoelectric nanofiber composites based on BNT-ST and PVDF for frequency sensor applications

S. Ji, J. Yun, J. Paik, 2016 .

The synthesis of flexible zeolite nanofibers by a polymer surface thermal etching process

S. Ji, J. Yun, J. Yun, 2017 .

IPMC actuators based on metal–Nafion™ composite films prepared by thermal decomposition of noble metal complexes

J. Yun, Hyung-Kun Lee, J. Paik, 2015, Applied Physics A.

IPMC actuators based on metal–Nafion™ composite films prepared by thermal decomposition of noble metal complexes

J. Yun, Hyung-Kun Lee, J. Paik, 2015 .

Wearable Core-Shell Piezoelectric Nanofiber Yarns for Body Movement Energy Harvesting

Ji Sun Yun, Sang Hyun Ji, S. Ji, 2019, Nanomaterials.

Fabrication and energy harvesting characteristics of unimorph piezoelectric cantilever generators with interdigitated electrode lead zirconate titanate laminates

W. Park, J. Yun, J. Paik, 2017 .

Book-Shaped All-in-One Piezo-Triboelectric Energy Harvester Module with Enhanced Current Characteristics As an Eco-Friendly Energy Source

S. Ji, J. Yun, Woo-Hun Lee, 2021, Journal of the European Ceramic Society.

Power Generation Characteristics of Uni-morph Piezoelectric Cantilever with Different Vibration Angle

W. Park, J. Yun, Chang-I. Kim, 2017 .

Development and Evaluation of Self-powered Energy Harvester in Wireless Sensor Node for Diagnosis of Electric Power System

Ji Sun Yun, Yong-Ho Jang, Chang-Il Kim, 2016 .

Structural Analysis and Characterization of PZT Fiber Fabricated by Electrospinning

J. Yun, J. Paik, J. Nam, 2013 .

Electrical properties of copper-nickel manganite thin films prepared by metal-organic decomposition

W. Park, J. Yun, J. Paik, 2017 .

Highly Ordered Porous Silica Adsorbent with Dual Pore Size Regime for Bulky VOC Gas Sensing

J. Yun, J. Paik, J. Nam, 2013 .

Effects of Sodium Excess on Ferroelectric Properties of Bi 0.5 (Na 0.78 K 0.22 ) 0.5 TiO 3 Ceramics

J. Yun, J. Paik, J. Park, 2016 .

Natural Cellulose-Based Multifunctional Nanofibers for the Effective Removal of Particulate Matter and Volatile Organic Compounds

S. Ji, J. Yun, 2023, Nanomaterials.

Characteristics and Fabrication of Multi-layered Piezoelectric Ceramic Actuators for Speaker Application

W. Park, J. Yun, J. Paik, 2016 .

Fabrication and Characterization of Aligned Flexible Lead-Free Piezoelectric Nanofibers for Wearable Device Applications

Ji Sun Yun, Sang Hyun Ji, S. Ji, 2018, Nanomaterials.

Development of Stretchable PZT/PDMS Nanocomposite Film with CNT Electrode

J. Yun, J. Paik, J. Nam, 2013 .

The Study on the Phase Transition and Piezoelectric Properties of Bi 0.5 (Na 0.78 K 0.22 ) 0.5 TiO 3 -LaMnO 3 Lead-free Piezoelectric Ceramics

J. Yun, J. Paik, Ku‐Tak Lee, 2015 .

Fabrication of 3D Printed Ceramic Part Using Photo-Polymerization Process

M. Park, J. Yun, Jin-Kyo Chung, 2023, Polymers.

The Fabrication and Characterization of Piezoelectric PZT/PVDF Electrospun Nanofiber Composites

J. Yun, J. Paik, S. Yoon, 2016 .

Recent Research Trends of Flexible Piezoelectric Nanofibers for Energy Conversion Materials

S. Ji, J. Yun, 2019, Ceramist.

Effects of A-site vacancies and lanthanum aluminate substitution on the dielectric and electromechanical properties of (1−y)Bi0.5+x(Na0.78K0.22)0.5−3xTiO3–yLaAlO3 lead-free ceramics

J. Yun, J. Paik, Ku‐Tak Lee, 2016 .