S. Qi

发表

Electrospun Polymer Blend Nanofibers for Tunable Drug Delivery: The Role of Transformative Phase Separation on Controlling the Release Rate.

P. Belton, Huiru Tang, P. Tipduangta, 2016, Molecular pharmaceutics.

Preparation and Characterization of Ultrarapidly Dissolving Orodispersible Films for Treating and Preventing Iodine Deficiency in the Pediatric Population.

P. Belton, S. Qi, Cholpon Rustemkyzy, 2015, Journal of agricultural and food chemistry.

Microstructure of an immiscible polymer blend and its stabilization effect on amorphous solid dispersions.

S. Qi, D. Craig, Jessica Albers, 2013, Molecular pharmaceutics.

Hot melt extruded zein for controlled delivery of diclofenac sodium: effect of drug loading and medium composition.

S. Qi, Ahmad Aljaberi, Lorina Bisharat, 2020, International journal of pharmaceutics.

An investigation into the influence of drug-polymer interactions on the miscibility, processability and structure of polyvinylpyrrolidone-based hot melt extrusion formulations.

S. Qi, D. Craig, Siok-Yee Chan, 2015, International journal of pharmaceutics.

Creating Drug Solubilization Compartments via Phase Separation in Multicomponent Buccal Patches Prepared by Direct Hot Melt Extrusion-Injection Molding.

P. Belton, S. Qi, N. Wellner, 2015, Molecular pharmaceutics.

Automation Potential of a New, Rapid, Microscopy-Based Method for Screening Drug–Polymer Solubility

P. Belton, L. Fábián, S. Qi, 2020, ACS omega.

An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing.

Sheng Qi, Muqdad Alhijjaj, Peter Belton, 2016, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Molecular Indicators of Surface and Bulk Instability of Hot Melt Extruded Amorphous Solid Dispersions

S. Qi, D. Craig, Jessica Albers, 2015, Pharmaceutical Research.

Physical stabilization of low-molecular-weight amorphous drugs in the solid state: a material science approach.

Sheng Qi, P. Tipduangta, S. Qi, 2014, Therapeutic delivery.

Pigliacelli, Claudia; Belton, Peter; Wilde, Peter; Qi, Sheng Probing the molecular interactions between pharmaceutical polymeric carriers and bile salts in simulated gastrointestinal fluids using NMR spectroscopy

P. Belton, P. Wilde, S. Qi, 2020 .

Spatial Characterization of Hot Melt Extruded Dispersion Systems Using Thermal Atomic Force Microscopy Methods: The Effects of Processing Parameters on Phase Separation

J. Moffat, S. Qi, D. Craig, 2014, Pharmaceutical Research.

Microfluidics for pharmaceutical nanoparticle fabrication: the truth and the myth.

Alaaldin M. Alkilany, S. Qi, A. Alkilany, 2020, International journal of pharmaceutics.

Personalized Polypills Produced by Fused Deposition Modeling 3D Printing

Fahad K. Alqahtani, S. Qi, Jehad Nasereddin, 2018, 3D and 4D Printing in Biomedical Applications.

Development of a Simple Mechanical Screening Method for Predicting the Feedability of a Pharmaceutical FDM 3D Printing Filament

P. Belton, S. Qi, N. Wellner, 2018, Pharmaceutical Research.

Novel Thermal Imaging Method for Rapid Screening of Drug-Polymer Miscibility for Solid Dispersion Based Formulation Development.

P. Belton, L. Fábián, S. Qi, 2018, Molecular pharmaceutics.

In Situ Forming Injectable Hydrogel For Encapsulation Of Nanoiguratimod And Sustained Release Of Therapeutics

Jie-xin Wang, S. Qi, Jinxia Zhao, 2019, International journal of nanomedicine.

Processing-Induced Disorder in Pharmaceutical Materials

S. Qi, 2016 .

The effect of processing on the surface physical stability of amorphous solid dispersions.

J. Moffat, S. Qi, D. Craig, 2014, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Stabilisation of amorphous drugs under high humidity using pharmaceutical thin films.

S. Qi, Ziyi Yang, W. McAuley, 2013, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

An investigation into the use of low quantities of functional additives to control drug release from hot melt extruded solid dispersions for poorly soluble drug delivery.

Fahad K. Alqahtani, P. Belton, S. Qi, 2020, International journal of pharmaceutics.

Early stage phase separation in pharmaceutical solid dispersion thin films under high humidity: improved spatial understanding using probe-based thermal and spectroscopic nanocharacterization methods.

J. Moffat, S. Qi, Ziyi Yang, 2013, Molecular pharmaceutics.

Compositional Analysis of Low Quantities of Phase Separation in Hot-Melt-Extruded Solid Dispersions: A Combined Atomic Force Microscopy, Photothermal Fourier-Transform Infrared Microspectroscopy, and Localised Thermal Analysis Approach

P. Belton, S. Qi, D. Craig, 2011, Pharmaceutical Research.

‘Tablet-in-Syringe’: A Novel Dosing Mechanism for Dysphagic Patients Containing Fast-Disintegrating Tablets Fabricated Using Semisolid Extrusion 3D Printing

S. Qi, P. Rachtanapun, K. Jantanasakulwong, 2022, Pharmaceutics.

Direct Granule Feeding of Thermal Droplet Deposition 3D Printing of Porous Pharmaceutical Solid Dosage Forms Free of Plasticisers

P. Belton, S. Qi, T. Mcdonagh, 2022, Pharmaceutical research.

Reversing tumor stemness via orally targeted nanoparticles achieves efficient colon cancer treatment.

S. Qi, Xiao Zhao, Yinlong Zhang, 2019, Biomaterials.

Hot melt extruded transdermal films based on amorphous solid dispersions in Eudragit RS PO: The inclusion of hydrophilic additives to develop moisture-activated release systems.

S. Qi, D. Craig, Esra’a Albarahmieh, 2016, International journal of pharmaceutics.

Improvement of the in vitro safety profile and cytoprotective efficacy of amifostine against chemotherapy by PEGylation strategy.

X. Yang, S. Qi, T. Ji, 2016, Biochemical pharmacology.

Thermal Analysis of Pharmaceuticals

S. Qi, 2016 .

An investigation into the formations of the internal microstructures of solid dispersions prepared by hot melt extrusion.

Steven A. Ross, P. Belton, S. Qi, 2020, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

An investigation into the crystallisation behaviour of an amorphous cryomilled pharmaceutical material above and below the glass transition temperature.

P. Belton, S. Qi, D. Craig, 2010, Journal of pharmaceutical sciences.

Disc-shaped polyoxyethylene glycol glycerides gel nanoparticles as novel protein delivery vehicles.

S. Qi, M. O'Connell, W. McAuley, 2015, International journal of pharmaceutics.

Sulforaphane Mediates Glutathione Depletion via Polymeric Nanoparticles to Restore Cisplatin Chemosensitivity.

S. Qi, Xuexiang Han, Yiye Li, 2019, ACS nano.

Suppression of the coffee-ring effect by tailoring the viscosity of pharmaceutical sessile drops

S. Qi, Alexandros Askounis, J. Wilkinson, 2021 .

The development of modulated, quasi-isothermal and ultraslow thermal methods as a means of characterizing the α to γ indomethacin polymorphic transformation.

S. Qi, D. Craig, 2012, Molecular pharmaceutics.

An investigation into the mechanism of dissolution rate enhancement of poorly water-soluble drugs from spray chilled gelucire 50/13 microspheres.

S. Qi, D. Craig, D. Marchaud, 2010, Journal of pharmaceutical sciences.

Disorders in Pharmaceutical Polymers

S. Qi, E. Dudognon, 2016 .

A laser imaging and neutron reflection investigation into the monolayer behaviour of fatty acids used for taste masking microspheres.

S. Qi, D. Craig, S. Barker, 2008, Journal of pharmaceutical sciences.

A multi-technique characterization of the stability of surfactant containing solid dispersion based buccal patches prepared by hot melt injection moulding.

P. Belton, S. Qi, Muqdad Alhijjaj, 2017, International journal of pharmaceutics.

Moisture Uptake of Polyoxyethylene Glycol Glycerides Used as Matrices for Drug Delivery: Kinetic Modelling and Practical Implications

P. Belton, S. Qi, W. McAuley, 2012, Pharmaceutical Research.

Solid lipid microparticles produced by spray congealing: influence of the atomizer on microparticle characteristics and mathematical modeling of the drug release.

S. Qi, D. Craig, N. Passerini, 2010, Journal of pharmaceutical sciences.

An investigation into the relationship between predicted drug miscibility and product stability for hot melt extruded systems: ibuprofen dispersions in Eudragit RS PO

S. Qi, D. Craig, Esra’a Albarahmieh, 2015 .

Insights into the Role of Polymer-Surfactant Complexes in Drug Solubilisation/Stabilisation During Drug Release from Solid Dispersions

K. Edler, S. Qi, S. Stokbroekx, 2012, Pharmaceutical Research.

Rationalising polymer selection for supersaturated film forming systems produced by an aerosol spray for the transdermal delivery of methylphenidate

S. Qi, W. McAuley, M. B. Brown, 2017, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Effects of porosity on drug release kinetics of swellable and erodible porous pharmaceutical solid dosage forms fabricated by hot melt droplet deposition 3D printing.

P. Belton, R. Bibb, S. Qi, 2021, International journal of pharmaceutics.

Solid dispersion – a pragmatic method to improve the bioavailability of poorly soluble drugs

S. Qi, G. Sadowski, D. Ouyang, 2015 .

Molecular implications of drug-polymer solubility in understanding the destabilization of solid dispersions by milling.

S. Qi, Jessica Albers, Ziyi Yang, 2014, Molecular pharmaceutics.

Paracetamol-loaded poly(epsilon-caprolactone) layered silicate nanocomposites prepared using hot-melt extrusion.

S. Qi, D. Craig, T. McNally, 2009, Journal of pharmaceutical sciences.

Controlled Release from Zein Matrices: Interplay of Drug Hydrophobicity and pH

P. Belton, R. de Vries, S. Qi, 2015, Pharmaceutical Research.

New insights into the effects of porosity, pore length, pore shape and pore alignment on drug release from extrusion-based additive manufactured pharmaceuticals

P. Belton, R. Bibb, S. Qi, 2021 .

The development of microthermal analysis and photothermal microspectroscopy as novel approaches to drug-excipient compatibility studies.

S. Qi, D. Craig, L. Harding, 2008, International journal of pharmaceutics.

An investigation into the mechanisms of drug release from taste-masking fatty acid microspheres.

S. Qi, D. Craig, D. Deutsch, 2008, Journal of pharmaceutical sciences.

An investigation into the interaction between taste masking fatty acid microspheres and alkaline buffer using thermal and spectroscopic analysis.

S. Qi, D. Craig, D. Deutsch, 2006, Journal of pharmaceutical sciences.

Suppression of Tumor Energy Supply by Liposomal Nanoparticle-Mediated Inhibition of Aerobic Glycolysis.

T. Wei, S. Qi, T. Ji, 2018, ACS applied materials & interfaces.

The Effects of Solid Particle Containing Inks on the Printing Quality of Porous Pharmaceutical Structures Fabricated by 3D Semi-Solid Extrusion Printing

P. Belton, S. Qi, Siok-Yee Chan, 2022, Pharmaceutical Research.

Characterisation of solid dispersions of paracetamol and EUDRAGIT E prepared by hot-melt extrusion using thermal, microthermal and spectroscopic analysis.

P. Belton, S. Qi, D. Craig, 2008, International journal of pharmaceutics.

A New Low Melting-Point Polymorph of Fenofibrate Prepared via Talc Induced Heterogeneous Nucleation

P. Belton, P. Tipduangta, L. Fábián, 2015 .

Physicochemical properties of the amorphous drug, cast films, and spray dried powders to predict formulation probability of success for solid dispersions: etravirine.

Sheng Qi, Jody Voorspoels, Mike Reading, 2011, Journal of pharmaceutical sciences.

Characterisation and Prediction of Phase Separation in Hot-Melt Extruded Solid Dispersions: A Thermal, Microscopic and NMR Relaxometry Study

Sheng Qi, Peter Belton, Mike Reading, 2010, Pharmaceutical Research.

Interaction of polymers with bile salts - Impact on solubilisation and absorption of poorly water-soluble drugs.

P. Belton, P. Wilde, S. Qi, 2022, Colloids and surfaces. B, Biointerfaces.

Probing the molecular interactions between pharmaceutical polymeric carriers and bile salts in simulated gastrointestinal fluids using NMR spectroscopy.

P. Belton, P. Wilde, S. Qi, 2019, Journal of colloid and interface science.

Development of a Simple Mechanical Screening Method for Predicting the Feedability of a Pharmaceutical FDM 3D Printing Filament

P. Belton, S. Qi, N. Wellner, 2018, Pharmaceutical Research.

Recent developments in micro- and nanofabrication techniques for the preparation of amorphous pharmaceutical dosage forms.

Sheng Qi, Duncan Craig, S. Qi, 2016, Advanced drug delivery reviews.

Impact of Processing Parameters on the Quality of Pharmaceutical Solid Dosage Forms Produced by Fused Deposition Modeling (FDM)

Sheng Qi, Muqdad Alhijjaj, Jehad Nasereddin, 2019, Pharmaceutics.

The Use of Quasi-Isothermal Modulated Temperature Differential Scanning Calorimetry for the Characterization of Slow Crystallization Processes in Lipid-Based Solid Self-Emulsifying Systems

S. Qi, D. Craig, E. Meehan, 2014, Pharmaceutical Research.

Nanostructural analysis of water distribution in hydrated multicomponent gels using thermal analysis and NMR relaxometry.

P. Belton, S. Qi, D. Codoni, 2015, Molecular pharmaceutics.

Insights into the Role of Polymer-Surfactant Complexes in Drug Solubilisation/Stabilisation During Drug Release from Solid Dispersions

K. Edler, S. Qi, S. Stokbroekx, 2012, Pharmaceutical Research.

The use of polymer blends to improve stability and performance of electrospun solid dispersions: the role of miscibility and phase separation.

P. Belton, P. Tipduangta, S. Qi, 2021, International journal of pharmaceutics.

On-demand, magnetic hyperthermia-triggered drug delivery: optimisation for the GI tract.

B. Hills, I. Parkin, S. Qi, 2016, Journal of materials chemistry. B.

Evaluation of the Benefits of Microfluidic-Assisted Preparation of Polymeric Nanoparticles for DNA Delivery.

Alaaldin M. Alkilany, P. Belton, S. Qi, 2021, Materials science & engineering. C, Materials for biological applications.

A SPION-eicosane protective coating for water soluble capsules: Evidence for on-demand drug release triggered by magnetic hyperthermia

I. Parkin, S. Qi, P. Southern, 2016, Scientific Reports.

Characterization of Heterogeneity and Spatial Distribution of Phases in Complex Solid Dispersions by Thermal Analysis by Structural Characterization and X-ray Micro Computed Tomography

J. A. Zeitler, P. Belton, S. Qi, 2016, Pharmaceutical Research.

An investigation into the effects of thermal history on the crystallisation behaviour of amorphous paracetamol.

Sheng Qi, S. Qi, D. Craig, 2008, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Characterization of Hydrophilic Polymers as a Syringe Extrusion 3D Printing Material for Orodispersible Film

P. Tipduangta, S. Qi, P. Rachtanapun, 2021, Polymers.

Development of combi-pills using the coupling of semi-solid syringe extrusion 3D printing with fused deposition modelling.

P. Belton, R. Bibb, S. Qi, 2022, International journal of pharmaceutics.

Manipulating drug release from 3D printed dual-drug loaded polypillsusing challenging polymer compositions.

P. Belton, S. Qi, T. Mcdonagh, 2023, International journal of pharmaceutics.

The Development of Direct Extrusion-Injection Moulded Zein Matrices as Novel Oral Controlled Drug Delivery Systems

P. Belton, E. Linden, S. Qi, 2015, Pharmaceutical Research.

Molecular Indicators of Surface and Bulk Instability of Hot Melt Extruded Amorphous Solid Dispersions

S. Qi, D. Craig, Jessica Albers, 2015, Pharmaceutical Research.

On-demand, magnetic hyperthermia-triggered drug delivery: optimisation for the GI tract.

B. Hills, I. Parkin, S. Qi, 2016, Journal of materials chemistry. B.

An efficient photo-chemo combination therapeutic platform based on targeted reduction-responsive self-crosslinked polymer nanocapsules

Jie-xin Wang, S. Qi, Yunfeng Lu, 2021, Materials Advances.

Drop-on-demand printing of personalised orodispersible films fabricated by precision micro-dispensing.

P. Belton, S. Qi, Chak Tam, 2021, International journal of pharmaceutics.

Thermal Analysis by Structural Characterization as a Method for Assessing Heterogeneity in Complex Solid Pharmaceutical Dosage Forms.

P. Belton, S. Qi, M. Reading, 2015, Analytical chemistry.