Jiyoung Jung

发表

Fouling-tolerant nanofibrous polymer membranes for water treatment.

S. Yadav, Jang-Woo Lee, Jiyoung Jung, 2014, ACS applied materials & interfaces.

Orientation Distribution Dependence of Piezoresistivity of Metal Nanowire-Polymer Composite

Seunghwa Ryu, N. Pugno, Jiyoung Jung, 2020 .

A facile route to fabricate stable reduced graphene oxide dispersions in various media and their transparent conductive thin films.

Jiyoung Jung, S. Hong, C. Koo, 2012, Journal of colloid and interface science.

Micromechanics-based prediction of the effective properties of piezoelectric composite having interfacial imperfections

Seunghwa Ryu, Jiyoung Jung, Sangryun Lee, 2020 .

Investigation of effective thermoelectric properties of composite with interfacial resistance using micromechanics-based homogenisation

Seunghwa Ryu, B. Ryu, Jiyoung Jung, 2018, International Journal of Heat and Mass Transfer.

3D Hierarchical Nanotopography for On-Site Rapid Capture and Sensitive Detection of Infectious Microbial Pathogens.

Kyoung G. Lee, Seunghwa Ryu, Jeong Moon, 2021, ACS nano.

Adaptive Affine Homogenization Method for Visco-hyperelastic Composites with Imperfect Interface

Seunghwa Ryu, Jiyoung Jung, I. Doghri, 2022, Applied Mathematical Modelling.

Graphene Electrodes for Artificial Muscles

Jiyoung Jung, S. Hong, C. Koo, 2011 .

Universal synthesis of conductive liquid network in polymers enabling elastic printed circuit board technology

Seunghwa Ryu, Jae‐Woong Jeong, Jiheong Kang, 2021 .

Improved incrementally affine homogenization method for viscoelastic-viscoplastic composites based on an adaptive scheme

Jiyoung Jung, I. Doghri, Sangryun Lee, 2022, Composite Structures.

Human-muscle-inspired single fibre actuator with reversible percolation

In Ho Kim, Seunghwa Ryu, P. Poulin, 2022, Nature Nanotechnology.

Improving the Sensitivity of the Mechanoluminescence Composite through Functionalization for Structural Health Monitoring.

Seunghwa Ryu, Jiyoung Jung, Taek-Soo Kim, 2022, ACS applied materials & interfaces.

Neural network-assisted optimization of segmented thermoelectric power generators using active learning based on a genetic optimization algorithm

Seunghwa Ryu, B. Ryu, Yongtae Kim, 2022, Energy Reports.

Universal assembly of liquid metal particles in polymers enables elastic printed circuit board

Seunghwa Ryu, Jae‐Woong Jeong, Hyunjun Kim, 2022, Science.

Applicability of interface spring and interphase models in micromechanics for predicting effective stiffness of polymer-matrix nanocomposite

Seunghwa Ryu, Jiyoung Jung, Sangryun Lee, 2021, Extreme Mechanics Letters.

Multiscale modeling framework to predict the effective stiffness of a crystalline-matrix nanocomposite

Young Soo Kim, Seunghwa Ryu, Jiyoung Jung, 2021 .

A Generalizable and Interpretable Deep Supervised Neural Network to Predict Strain Field of Composite in Unseen Design Space

Seunghwa Ryu, Jiyoung Jung, Dong-Oh Park, 2022, SSRN Electronic Journal.

Transfer learning for enhancing the homogenization-theory-based prediction of elasto-plastic response of particle/short fiber-reinforced composites

Jinkyoo Park, Jiyoung Jung, YongTae Kim, 2022, Composite Structures.

P‐205L: Late‐News Poster: The Study of the Correlation between Surface Anchoring Energy and Activation Energy on Patterned Vertical Alignment (PVA) Mode

Jiyoung Jung, K. Rhie, S. Shin, 2007 .

Micromechanics-based theoretical prediction for thermoelectric properties of anisotropic composites and porous media

Seunghwa Ryu, B. Ryu, Jiyoung Jung, 2021, International Journal of Thermal Sciences.

Investigation of thermal conductivity for liquid metal composites using the micromechanics-based mean-field homogenization theory.

Seunghwa Ryu, K. Hjort, Jiyoung Jung, 2020, Soft matter.

Electromechanical Strain Responses of SEBS/CB and SEBS/SWCNT Composites

Jiyoung Jung, C. Koo, I. Kim, 2012 .

Micromechanics-Based Homogenization of the Effective Physical Properties of Composites With an Anisotropic Matrix and Interfacial Imperfections

Seunghwa Ryu, Jiyoung Jung, Sangryun Lee, 2018, Front. Mater..

Double Generative Network (DGNet) Pipeline for Structure-Property Relation of Digital Composites

Jiyoung Jung, Dong-Oh Park, S. Ryu, 2023, Composite Structures.

A Generalizable and Interpretable Deep Learning Model to Improve the Prediction Accuracy of Strain Fields in Grid Composites

Seunghwa Ryu, Jiyoung Jung, Dong-Oh Park, 2022, Materials & Design.

Coarse-grained modeling for predicting the piezoresistive response of CNT-elastomer nanocomposite

Seunghwa Ryu, Jiyoung Jung, Jinwook Yeo, 2023, Frontiers in Materials.

Optimization of injection molding process using multi-objective bayesian optimization and constrained generative inverse design networks

Jinkyoo Park, Jiyoung Jung, Kundo Park, 2022, Journal of Intelligent Manufacturing.

A Simulated Annealing Algorithm for the Capacitated Lot-sizing and Scheduling problem under Sequence-Dependent Setup Costs and Setup Times

Sungsoo Park, Jiyoung Jung, Sungsoo Park, 2006 .

Self-Powered Strain Sensor based on the Piezo-Transmittance of a Mechanical Metamaterial

I. Park, Seunghwa Ryu, Jiyoung Jung, 2021 .

Adaptive Affine Homogenization Method for Visco-hyperelastic Composites with Interfacial Damage

Seunghwa Ryu, Jiyoung Jung, I. Doghri, 2021 .