A. Bianco

发表

Assessment of poly(ɛ-caprolactone)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) blends processed by solvent casting and electrospinning

Francesca Nanni, Alessandra Bianco, Costantino Del Gaudio, 2011 .

Electrospun tubular scaffolds: on the effectiveness of blending poly(ε-caprolactone) with poly(3-hydroxybutyrate-co-3-hydroxyvalerate).

Costantino Del Gaudio, Alessandra Bianco, Enrico Ercolani, 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

Zirconium titanate: from polymeric precursors to bulk ceramics

A. Bianco, M. Paci, R. Freer, 1998 .

Experimental investigation on the causes for pellet fragmentation under LOCA conditions

A. Bianco, R. Macián‐Juan, M. Seidl, 2015 .

Electrospun bioresorbable trileaflet heart valve prosthesis for tissue engineering: in vitro functional assessment of a pulmonary cardiac valve design.

Mauro Grigioni, Costantino Del Gaudio, Alessandra Bianco, 2008, Annali dell'Istituto superiore di sanita.

In vitro astrocyte and cerebral endothelial cell response to electrospun poly(ε-caprolactone) mats of different architecture

M. Grigioni, M. Folin, A. Bianco, 2010, Journal of materials science. Materials in medicine.

Structural characterization and cell response evaluation of electrospun PCL membranes: micrometric versus submicrometric fibers.

Mauro Grigioni, Costantino Del Gaudio, Alessandra Bianco, 2009, Journal of biomedical materials research. Part A.

Electrospun poly(ε-caprolactone)/Ca-deficient hydroxyapatite nanohybrids: Microstructure, mechanical properties and cell response by murine embryonic stem cells

L. Campagnolo, J. Kenny, G. Gusmano, 2009 .

Decellularized bovine reinforced vessels for small-diameter tissue-engineered vascular grafts.

C. Grandi, M. Conconi, P. Parnigotto, 2011, International journal of molecular medicine.

High performance cementitious nanocomposites: The effectiveness of nano-Graphite (nG)

F. Vivio, F. Lamastra, A. Bianco, 2020 .

Humidity sensitivity of sputtered TiO2 thin films

E. Traversa, A. Bearzotti, A. Bianco, 1994 .

AP40 Bioactive Glass Ceramic by Sol-Gel Synthesis: In Vitro Dissolution and Cell-Mediated Bioresorption

I. Cacciotti, A. Bianco, A. Camaioni, 2013 .

Sol–gel derived 45S5 bioglass: synthesis, microstructural evolution and thermal behaviour

M. Lombardi, A. Ravaglioli, I. Cacciotti, 2012, Journal of Materials Science: Materials in Medicine.

Bioactive glass–ceramic coatings prepared by pulsed laser deposition from RKKP targets (sol–gel vs melt-processing route)

R. Caminiti, A. Ravaglioli, I. Cacciotti, 2012 .

High density Gd-substituted yttrium iron garnets by coprecipitation

F. Nanni, F. Lamastra, G. Gusmano, 2008 .

Electrospun gelatin scaffolds incorporating rat decellularized brain extracellular matrix for neural tissue engineering.

P. Macchiarini, A. Bianco, C. Del Gaudio, 2014, Biomaterials.

Induction of angiogenesis using VEGF releasing genipin-crosslinked electrospun gelatin mats.

D. Ribatti, P. Macchiarini, A. Bianco, 2013, Biomaterials.

Biomechanical and biocompatibility characteristics of electrospun polymeric tracheal scaffolds.

G. Lemon, P. Macchiarini, Fatemeh Ajalloueian, 2014, Biomaterials.

RKKP bioactive glass-ceramic material through an aqueous sol-gel process

M. Lombardi, I. Cacciotti, A. Bianco, 2015 .

A Comparative Study between Melt-Derived and Sol-Gel Synthesized 45S5 Bioactive Glasses

J. Chevalier, M. Lombardi, I. Cacciotti, 2013 .

Long-term changes to in vitro preserved bioengineered human trachea and their implications for decellularized tissues.

Doris A Taylor, D. Ribatti, C. Comin, 2012, Biomaterials.

Porous wollastonite–hydroxyapatite bioceramics from a preceramic polymer and micro- or nano-sized fillers

E. Bernardo, L. Treccani, K. Rezwan, 2012 .

Dielectric properties at microwave frequencies of poly(?-caprolactone)/CNF films and electrospun mat

J. Kenny, F. Nanni, G. Gusmano, 2011 .

Synthesis, thermal behaviour and luminescence properties of rare earth-doped titania nanofibers

I. Cacciotti, G. Gusmano, A. Bianco, 2011 .

Terbium and ytterbium-doped titania luminescent nanofibers by means of electrospinning technique

I. Cacciotti, G. Gusmano, A. Bianco, 2011 .

Differentiation of osteoblast and osteoclast precursors on pure and silicon-substituted synthesized hydroxyapatites

L. Campagnolo, I. Cacciotti, A. Bianco, 2012, Biomedical materials.

Structure and composition of electrospun titania nanofibres doped with Eu

I. Cacciotti, M. E. Fragalá, F. Lamastra, 2010 .

Nanohybrid PVA/ZrO2 and PVA/Al2O3 electrospun mats

F. Nanni, F. Lamastra, G. Gusmano, 2008 .

DODCI molecules incorporated in sol–gel glasses: the interaction with the silica matrix

P. Prosposito, M. Casalboni, A. Bianco, 1998 .

Microstructure and surface composition of ferromagnetic thick films prepared with NiCo polyol-derived powders

B. Morten, M. Prudenziati, G. Righini, 2000 .

Dynamic decellularization and cross-linking of rat tracheal matrix.

P. Macchiarini, A. Bianco, C. Del Gaudio, 2014, Biomaterials.

Lending a helping, healing hand

C. Gaudio, E. Ercolani, A. Bianco, 2013 .

Preparation of NiCo metal powders by co-reduction of Ni (II) and Co(II) hydroxides for magnetoresistive sensors

E. Traversa, G. Gusmano, A. Bianco, 1994 .

Electrospun polymeric coatings on aluminum alloy as a straightforward approach for corrosion protection

F. Lamastra, C. Gaudio, A. Bianco, 2015 .

Mg- and/or Sr-doped tricalcium phosphate/bioactive glass composites: synthesis, microstructure and biological responsiveness.

A. Sola, I. Cacciotti, A. Bianco, 2014, Materials science & engineering. C, Materials for biological applications.

Nanostructured Si-substituted hydroxyapatite coatings for biomedical applications

I. Cacciotti, A. Bianco, S. Laureti, 2013 .

F-substituted hydroxyapatite nanopowders: Thermal stability, sintering behaviour and mechanical properties

M. Lombardi, I. Cacciotti, A. Bianco, 2010 .

Silicon-substituted hydroxyapatite for biomedical applications

L. Campagnolo, I. Cacciotti, A. Bianco, 2015 .

Si-substituted hydroxyapatite nanopowders: synthesis, thermal stability and sinterability

M. Lombardi, I. Cacciotti, A. Bianco, 2009 .

High thermally stable Mg-substituted tricalcium phosphate via precipitation

I. Cacciotti, A. Bianco, 2011 .

Extra-Low Dosage Graphene Oxide Cementitious Nanocomposites: A Nano- to Macroscale Approach

C. Mazzuca, F. Lamastra, A. Bianco, 2021, Nanomaterials.

Core–shell Zn-doped TiO2–ZnO nanofibers fabricated via a combination of electrospinning and metal–organic chemical vapour deposition

I. Cacciotti, M. E. Fragalá, C. Spinella, 2010 .

High‐Density Single‐Phase Yttrium–Gadolinum–Iron Garnets by Spray Drying

F. Nanni, F. Lamastra, G. Gusmano, 2008 .

Mg-substituted hydroxyapatite nanopowders: Synthesis, thermal stability and sintering behaviour

M. Lombardi, I. Cacciotti, A. Bianco, 2009 .

Thermal stability and sintering behaviour of hydroxyapatite nanopowders

M. Lombardi, I. Cacciotti, G. Gusmano, 2007 .

Vascular tissue engineering of small‐diameter blood vessels: reviewing the electrospinning approach

Costantino Del Gaudio, Alessandra Bianco, Enrico Ercolani, 2015, Journal of tissue engineering and regenerative medicine.

Silicon-substituted Hydroxyapatite (Hap) for Biomedical Applications

L. Campagnolo, I. Cacciotti, A. Bianco, 2015 .

Zirconium titanate microwave dielectrics prepared via polymeric precursor route

G. Gusmano, A. Bianco, R. Freer, 1999 .

Assessment of in vitro temporal corrosion and cytotoxicity of AZ91D alloy

C. Grandi, P. Parnigotto, A. Bianco, 2012, Journal of Materials Science: Materials in Medicine.

Design, production and biocompatibility of nanostructured porous HAp and Si-HAp ceramics as three-dimensional scaffolds for stem cell culture and differentiation

L. Campagnolo, I. Cacciotti, A. Bianco, 2010 .

Chemical synthesis and sintering behaviour of highly dispersed W/Cu composite powders

G. Marcheselli, G. Gusmano, A. Bianco, 2001 .

Zirconium tin titanate thin films via aqueous polymeric precursor route

P. Scardi, G. Gusmano, A. Bianco, 2001 .

Novel processing of bioglass ceramics from silicone resins containing micro- and nano-sized oxide particle fillers.

E. Bernardo, A. Sola, I. Cacciotti, 2014, Journal of biomedical materials research. Part A.

Tuning multi/pluri-potent stem cell fate by electrospun poly(L-lactic acid)-calcium-deficient hydroxyapatite nanocomposite mats.

Enrica Saino, Livia Visai, Elena Fortunati, 2012, Biomacromolecules.

Poly (L-lactic acid)/calcium-deficient nanohydroxyapatite electrospun mats for bone marrow stem cell cultures

Costantino Del Gaudio, Ilaria Cacciotti, Sabata Martino, 2011 .

A systematic study on EN-998-2 premixed mortars modified with graphene-based materials

Francesco Vivio, Ugo Ianniruberto, E Marotta, 2019 .

Electrospun protective self‐healing coatings for light alloys: A better understanding of the intrinsic potential of the technology

F. Lamastra, C. Gaudio, A. Bianco, 2015 .

Electrospun Bioresorbable Heart Valve Scaffold for Tissue Engineering

M. Grigioni, A. Bianco, C. Del Gaudio, 2008 .

Electrospun bioresorbable heart valve scaffold for tissue engineering.

M. Grigioni, A. Bianco, C. Del Gaudio, 2008, The International journal of artificial organs.

Neuro-differentiated Ntera2 cancer stem cells encapsulated in alginate beads: First evidence of biological functionality.

G. Pistritto, I. Cacciotti, A. Bianco, 2017, Materials science & engineering. C, Materials for biological applications.

In-vitro Force Assessments of an Autoclavable Instrumented Sternal Retractor

Giovanni Saggio, Laura Sbernini, Alessandra Bianco, 2017, BIODEVICES.

Tracheal tissue engineering in rats

Costantino Del Gaudio, Greg Lemon, Per Uhlén, 2014, Nature Protocols.

The Bio-Artificial Trachea

P. Macchiarini, C. Gaudio, A. Bianco, 2015 .

Are synthetic scaffolds suitable for the development of clinical tissue-engineered tubular organs?

P. Macchiarini, Fatemeh Ajalloueian, A. Bianco, 2014, Journal of biomedical materials research. Part A.

Processing and properties of poly(ε-caprolactone)/carbon nanofibre composite mats and films obtained by electrospinning and solvent casting

E. Fortunati, J. Kenny, F. Nanni, 2009 .

Evaluation of electrospun bioresorbable scaffolds for tissue-engineered urinary bladder augmentation

A. Bianco, C. Del Gaudio, M. Porena, 2013, Biomedical materials.

Viability and proliferation of rat MSCs on adhesion protein-modified PET and PU scaffolds.

G. Lemon, P. Macchiarini, Fatemeh Ajalloueian, 2012, Biomaterials.

Aspirin-loaded electrospun poly(ε-caprolactone) tubular scaffolds: potential small-diameter vascular grafts for thrombosis prevention

Costantino Del Gaudio, Pierluca Galloni, Alessandra Bianco, 2013, Journal of Materials Science: Materials in Medicine.

Development of bioengineered human larynx.

D. Ribatti, C. Comin, P. Macchiarini, 2011, Biomaterials.

Sternotomy: Mechanical Test and Early Clinical Experience Performance of a Novel Sternal Synthesis Device After Median and Faulty

F. Nanni, A. Bianco, F. Bertoldo, 2008 .

Performance of a novel sternal synthesis device after median and faulty sternotomy: mechanical test and early clinical experience.

Francesca Nanni, Luigi Chiariello, Alessandra Bianco, 2008, The Annals of thoracic surgery.

Selective Emitters for High Efficiency TPV Conversion: Materials Preparation and Characterisation

Antonio Licciulli, D. Diso, G. Leo, 2003 .

Electrospun PHBV/PEO co-solution blends: microstructure, thermal and mechanical properties.

I. Cacciotti, A. Bianco, Manuela Calderone, 2013, Materials science & engineering. C, Materials for biological applications.

[Proceeding] A FULLY IMPLICIT MATERIAL RESPONSE CODE WITH ABLATION AND PYROLYSIS FOR SIMULATION OF THERMAL PROTECTION SYSTEMS

A. Bianco, V. Mareschi, D. D’Ambrosio, 2016 .

A FULLY IMPLICIT MATERIAL RESPONSE CODE WITH ABLATION AND PYROLYSIS FOR SIMULATION OF THERMAL PROTECTION SYSTEMS

A. Bianco, V. Mareschi, D. D’Ambrosio, 2015 .

Tailoring the properties of electrospun PHBV mats: Co-solution blending and selective removal of PEO

I. Cacciotti, A. Bianco, Manuela Calderone, 2013 .

Toward a better understanding of multifunctional cement-based materials: The impact of graphite nanoplatelets (GNPs)

F. Vivio, F. Lamastra, A. Bianco, 2021, Ceramics International.

An Electronic-Engineered Sensory Sternal Retractor Aimed at Post-sternotomy Pain Reduction

Giovanni Saggio, Giancarlo Orengo, Alessandra Bianco, 2017, BIOSTEC.

Study of Zr1−xSnxTiO4 thin films prepared by a polymeric precursor route

G. Gusmano, A. Bianco, L. Pandolfi, 2002 .

Preparation and properties of new thick-film magnetoresistive materials

Maria Prudenziati, Bruno Morten, G. De Cicco, 1996 .

Microstructural characterisation of Ni, Co and NiCo fine powders for physical sensors☆

E. Traversa, G. Gusmano, A. Bianco, 1995 .

Electrospun poly(ε-caprolactone)-based composites using synthesized β-tricalcium phosphate

I. Cacciotti, A. Bianco, E. D. Federico, 2011 .

Thin films of Zr/sub 1-x/Sn/sub x/TiO/sub 4/ for application in microelectronics

A. Bianco, S. Kaciulis, G. Mattogno, 2000, COMMAD 2000 Proceedings. Conference on Optoelectronic and Microelectronic Materials and Devices.

Retraction: Experimental orthotopic transplantation of a tissue-engineered oesophagus in rats

Doris A Taylor, G. Lemon, D. Ribatti, 2017, Nature Communications.

Experimental orthotopic transplantation of a tissue-engineered oesophagus in rats

Costantino Del Gaudio, Greg Lemon, Ylva Gustafsson, 2014, Nature Communications.

New Materials and Technologies for Durability and Conservation of Building Heritage

L. Di Palma, A. Mazzoli, V. Daniele, 2023, Materials.

Biomechanical and angiogenic properties of tissue-engineered rat trachea using genipin cross-linked decellularized tissue.

Costantino Del Gaudio, Alessandra Bianco, Philipp Jungebluth, 2012, Biomaterials.

Eu-doped titania nanofibers: processing, thermal behaviour and luminescent properties.

I. Cacciotti, F. Lamastra, G. Gusmano, 2010, Journal of nanoscience and nanotechnology.

Thick-film magnetoresistors and related sensors

B. Morten, M. Prudenziati, G. Gusmano, 1997 .

Cementitious nanocomposites engineered with high-oxidized graphene oxide: Spotting the nano to macro correlation

C. Mazzuca, F. Lamastra, A. Bianco, 2022, Ceramics International.

Microstructure and Cytocompatibility of Electrospun Nanocomposites Based on Poly(ɛ-Caprolactone) and Carbon Nanostructures

Chiara Bertarelli, Costantino Del Gaudio, Andrea Lucotti, 2010, The International journal of artificial organs.

Microscopic assessment of scaffold ultrastructure for tissue engineering applications

P. Macchiarini, C. Gaudio, A. Bianco, 2012 .

Effect of Drag Stages Surface Roughness on the Compression Ratio of a TMDP

A. Bianco, L. Bonmassar, 2016 .

Development of bioengineered human larynx.

D. Ribatti, C. Comin, P. Macchiarini, 2011, Biomaterials.

Electrospun gelatin scaffolds incorporating rat decellularized brain extracellular matrix for neural tissue engineering.

P. Macchiarini, A. Bianco, C. Del Gaudio, 2014, Biomaterials.

Structural characterization and cell response evaluation of electrospun PCL membranes: micrometric versus submicrometric fibers.

M. Grigioni, M. Folin, A. Bianco, 2009, Journal of biomedical materials research. Part A.

Vascular tissue engineering of small‐diameter blood vessels: reviewing the electrospinning approach

E. Ercolani, A. Bianco, C. Del Gaudio, 2015, Journal of tissue engineering and regenerative medicine.

Electrospun PHBV/PEO co-solution blends: microstructure, thermal and mechanical properties.

I. Cacciotti, A. Bianco, Manuela Calderone, 2013, Materials science & engineering. C, Materials for biological applications.

Erbium containing ceramic emitters for thermophotovoltaic energy conversion

M. Mazzer, A. Bianco, A. Licciulli, 2003 .