Z. Lü

发表

Novel polymer fibers prepared by electrospinning for use as the pore-former for the anode of solid oxide fuel cell

W. Pan, Z. Lü, Kongfa Chen, 2010 .

Redox Tolerance of Thin and Thick Ni/YSZ Anodes of Electrolyte‐Supported Single‐Chamber Solid Oxide Fuel Cells under Methane Oxidation Conditions

Xingbao Zhu, Z. Lü, Xiqiang Huang, 2013 .

Effect of stack configurations on single chamber solid oxide fuel cell, anode–cathode, anode–anode, and cathode–cathode configuration

Z. Lü, Mingliang Liu, 2013 .

Redox of Ni/YSZ anodes and oscillatory behavior in single-chamber SOFC under methane oxidation conditions

Weiping Pan, Bo Wei, Wenhui Su, 2011 .

A right-angular configuration for the single-chamber solid oxide fuel cell

W. Pan, Z. Lü, Kongfa Chen, 2011 .

A Configuration for Improving the Performance of Coplanar Single-Chamber Solid Oxide Fuel Cell

W. Pan, Z. Lü, Kongfa Chen, 2010 .

Performance of an annular solid-oxide fuel cell micro-stack array operating in single-chamber conditions

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2010 .

A Novel Cell‐Array Design for Single Chamber SOFC Microstack

Z. Lü, Kongfa Chen, Xiqiang Huang, 2009 .

Effect of the Cell Distance on the Cathode in Single Chamber SOFC Short Stack

Z. Lü, Kongfa Chen, Xiqiang Huang, 2009 .

Optimization on technical parameters for fabrication of SDC film by screen-printing used as electrolyte in IT-SOFC

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2008 .

NiO+YSZ anode substrate for screen-printing fabrication of YSZ electrolyte film in solid oxide fuel cell

Z. Lü, Kongfa Chen, Xiqiang Huang, 2009 .

In Situ Surface Film Formed by Solid‐State Anodic Oxidation for Stable Lithium Metal Anodes

Xifei Li, Yaohui Zhang, Z. Lü, 2021, Advanced Functional Materials.

Electrochemically Driven Deactivation and Recovery in PrBaCo2 O5+δ Oxygen Electrodes for Reversible Solid Oxide Fuel Cells.

Yaohui Zhang, Z. Lü, Kongfa Chen, 2016, ChemSusChem.

CNF-grafted carbon fibers as a binder-free cathode for LithiumOxygen batteries with a superior performance

Xingbao Zhu, Z. Lü, Yuanguo Wu, 2018 .

Paper‐Fibres Used as a Pore‐Former for Anode Substrate of Solid Oxide Fuel Cell

W. Pan, Z. Lü, B. Wei, 2011 .

Ni/SDC Nanoparticles Modified La0.75Sr0.25Cr0.5Fe0.5O3 − δ as Anodes for Solid Oxide Fuel Cells

Xingbao Zhu, Z. Lü, Kongfa Chen, 2009 .

A Novel Interconnect Material for SOFCs

Z. Lü, Xiqiang Huang, W. Su, 2005 .

Thermal, electrical, and electrochemical properties of Nd-doped Ba0.5Sr0.5 Co0.8Fe0.2O3 − δ as a cathode material for SOFC

Z. Lü, Xiqiang Huang, W. Su, 2008 .

La1.7Sr0.3Co0.5Ni0.5O4+δ layered perovskite as an efficient bifunctional electrocatalyst for rechargeable zinc-air batteries

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2019, Applied Surface Science.

A convenient and efficient mass-production strategy to fabricate sustainable cathodes for lithium–oxygen batteries: Sucrose-derived active carbon coating technology

Xingbao Zhu, Z. Lü, Xi Pan, 2019, Electrochimica Acta.

Development and performance of diopside based glass-ceramic sealants for solid oxide fuel cells

M. Pascual, J. Ferreira, Z. Lü, 2010 .

Understanding the phase formation and compositions of barium carbonate modified NiO-yttria stabilized zirconia for fuel cell applications

Meilin Liu, Meilin Liu, Z. Lü, 2015 .

A mixed-conducting BaPr0.8In0.2O3 − δ cathode for proton-conducting solid oxide fuel cells

Meilin Liu, Wenping Sun, Meilin Liu, 2013 .

A comparison of La0.75Sr0.25Cr0.5Mn0.5O3−δ and Ni impregnated porous YSZ anodes fabricated in two different ways for SOFCs

Xingbao Zhu, Z. Lü, Xiqiang Huang, 2010 .

Impregnated La0.75Sr0.25Cr0.5Fe0.5O3 − δ -Based Anodes Operating on H2, CH4, and C2H5OH Fuels

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2010 .

Fabrication and performance test of solid oxide fuel cells with screen-printed yttria-stabilized zirconia electrolyte membranes

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2011 .

Characteristics of NiO-YSZ anode based on NiO particles synthesized by the precipitation method

Z. Lü, Kongfa Chen, Xiqiang Huang, 2008 .

Low temperature solid oxide fuel cell with Ba0.5Sr0.5Co0.8Fe0.2O3 cathode prepared by screen printing

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2008 .

Effect of SDC-impregnated LSM cathodes on the performance of anode-supported YSZ films for SOFCs

Z. Lü, Kongfa Chen, Xiqiang Huang, 2007 .

Preparation of YSZ film by EPD and its application in SOFCs

Z. Lü, Kongfa Chen, Xiqiang Huang, 2006 .

A Novel Method for Fabrication of Y2O3-Stabilized ZrO2 Electrolyte Films

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2006 .

Low temperature solid oxide fuel cells based on Sm0.2Ce0.8O1.9 films fabricated by slurry spin coating

Yaohui Zhang, Z. Lü, Kongfa Chen, 2006 .

A screen-printed Ce0.8Sm0.2O1.9 film solid oxide fuel cell with a Ba0.5Sr0.5Co0.8Fe0.2O3−δ cathode

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2006 .

Preparation of Sm0.2Ce0.8O1.9 membranes on porous substrates by a slurry spin coating method and its application in IT-SOFC

Yanwei Liu, Z. Lü, Kongfa Chen, 2006 .

Niobium Doped Lanthanum Strontium Ferrite as A Redox-Stable and Sulfur-Tolerant Anode for Solid Oxide Fuel Cells.

Z. Lü, B. Wei, X. Yue, 2018, ChemSusChem.

Enhanced performance of solid oxide fuel cells with Ni/CeO2 modified La0.75Sr0.25Cr0.5Mn0.5O3−δ anodes

Xingbao Zhu, Z. Lü, Kongfa Chen, 2009 .

Ni–Sm0.2Ce0.8O1.9 anode-supported YSZ electrolyte film and its application in solid oxide fuel cells

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2007 .

Efficient electrolysis of CO2 in symmetrical solid oxide electrolysis cell with highly active La0.3Sr0.7Fe0.7Ti0.3O3 electrode material

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2016 .

A Performance Study of Solid Oxide Fuel Cells With BaZr0.1Ce0.7Y0.2O3–δ Electrolyte Developed by Spray‐Modified Pressing Method

Z. Lü, Xiqiang Huang, B. Wei, 2012 .

Effect of SiO2 coating on the magnetic properties of Ni–Zn ferrite

Z. Lü, Xiqiang Huang, W. Su, 2010 .

Continuous conversion of biomass wastes in a La0.75Sr0.25Cr0.5Mn0.5O3–δ based carbon–air battery

Xingbao Zhu, Z. Lü, Yiqian Li, 2016 .

A novel design of single-chamber SOFC micro-stack operated in methane–oxygen mixture

Bo Wei, Mingliang Liu, Wenhui Su, 2009 .

Enhanced performance of a single-chamber solid oxide fuel cell with dual gas supply method

Z. Lü, B. Wei, Zhihong Wang, 2019, Ionics.

Effect of the angle between gas flow direction and electrode on single-chamber SOFC stacks

Z. Lü, B. Wei, Zhihong Wang, 2019, Journal of Solid State Electrochemistry.

Effect of gas supply method on the performance of the single-chamber SOFC micro-stack and the single cells

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2012, Journal of Solid State Electrochemistry.

Evaluation of a Non‐sealed Solid Oxide Fuel Cell Stack with Cells Embedded in Plane Configuration

Xingbao Zhu, W. Pan, Z. Lü, 2012 .

A non-sealed solid oxide fuel cell micro-stack with two gas channels

Z. Lü, Xiqiang Huang, B. Wei, 2011 .

Effects of the single chamber SOFC stack configuration on the performance of the single cells

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2010 .

Enhanced performance of a single-chamber solid oxide fuel cell with an SDC-impregnated cathode

Z. Lü, Kongfa Chen, Xiqiang Huang, 2007 .

Nanostructured ( Ba , Sr ) ( Co , Fe ) O3 − δ Impregnated ( La , Sr ) MnO3 Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

S. Jiang, Z. Lü, Kongfa Chen, 2010 .

A preliminary study of the pseudo-capacitance features of strontium doped lanthanum manganite

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2015 .

High-performance and stable La0.8Sr0.2Fe0.9Nb0.1O3-δanode for direct carbon solid oxide fuel cells fueled by activated carbon and corn straw derived carbon

Z. Lü, B. Wei, Chaoqi Wang, 2018, International Journal of Hydrogen Energy.

Effect of energy transfer on electroluminescent performance in blend-layer organic light-emitting devices

Z. Lü, Yanqiang Yang, Shuping Zhang, 2008 .

Efficient use of waste carton for power generation, tar and fertilizer through direct carbon solid oxide fuel cell

Z. Lü, B. Wei, Chaoqi Wang, 2020 .

Effects of discharge mode and fuel treating temperature on the fuel utilization of direct carbon solid oxide fuel cell

Xingbao Zhu, Z. Lü, Chaoqi Wang, 2019, International Journal of Hydrogen Energy.

The Effect of Adding Ce1–xSmxO2–x/2 with Different Sm Contents on the Electrochemical Performance of GdBaCo2O5+δ Based Composite Cathode

Z. Lü, B. Wei, W. Su, 2013 .

Improved Electrodes/Electrolyte Interfaces for Solid Oxide Fuel Cell by Using Dual‐Sized Powders in Electrolyte Slurry

W. Pan, Z. Lü, B. Wei, 2012 .

A direct flame solid oxide fuel cell for potential combined heat and power generation

Meilin Liu, Lei Yang, Xingbao Zhu, 2012 .

Performance of an anode-supported SOFC with anode functional layers

Z. Lü, Kongfa Chen, Xiqiang Huang, 2008 .

A study of the process parameters for yttria-stabilized zirconia electrolyte films prepared by screen-printing

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2006 .

A study of (Ba0.5Sr0.5)1 − xSmxCo0.8Fe0.2O3 − δ as a cathode material for IT-SOFCs

Z. Lü, Xiqiang Huang, B. Wei, 2006 .

Fabrication and performance of membrane solid oxide fuel cells with La0.75Sr0.25Cr0.5Mn0.5O3−δ impregnated anodes

Xingbao Zhu, Z. Lü, Kongfa Chen, 2010 .

Investigations on sulfur poisoning mechanisms of a solid oxide fuel cell with niobium-doped ferrate perovskite anode

Z. Lü, B. Wei, X. Yue, 2020 .

Novel cobalt-free layered perovskite LaBaFe2-xNbxO6-δ (x=0–0.1) as cathode for solid oxide fuel cells

Z. Lü, B. Wei, Chaoqi Wang, 2020 .

Morphology evolution and exsolution mechanism of a partially decomposed anode for intermediate temperature-solid oxide fuel cells

Z. Lü, B. Wei, Huan-Huan Li, 2019, Electrochimica Acta.

A Highly Efficient and Robust Perovskite Anode with Iron-Palladium Co-exsolutions for Intermediate-Temperature Solid-Oxide Fuel Cells.

Z. Lü, B. Wei, X. Yue, 2018, ChemSusChem.

Synergistically improving electrocatalytic performance and CO2 tolerance of Fe-based cathode catalysts for solid oxide fuel cells

H Zhao, Z. Lü, B. Wei, 2022, Energy.

A facile bottom-up strategy based on combustion-reduction toward monolithic micron/nanoporous nickel: an efficient electrode material for hydrogen evolution reaction and supercapacitor

Shuo Wang, Yaohui Zhang, Z. Lü, 2022, Electrochimica Acta.

Evaluation of (Ba0.5Sr0.5)0.85Gd0.15Co0.8Fe0.2O3−δ cathode for intermediate temperature solid oxide fuel cell

Yaohui Zhang, Z. Lü, Kongfa Chen, 2012 .

Effect of composite pore-former on the fabrication and performance of anode-supported membranes for SOFCs

Xiaobo Du, Z. Lü, Kongfa Chen, 2008 .

Synthesis and characterization of La0.9Sr0.1Ga0.8Mg0.2O3−δ intermediate-temperature electrolyte using conventional solid state reaction

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2012 .

Nanosized Ce0.8Sm0.2O1.9 infiltrated GdBaCo2O5+δ cathodes for intermediate-temperature solid oxide fuel cells

Yaohui Zhang, D. Jia, Z. Lü, 2011 .

In-situ reduction synthesis of La2O3/NiM-NCNTs (M = Fe, Co) as efficient bifunctional electrocatalysts for oxygen reduction and evolution reactions

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2018, International Journal of Hydrogen Energy.

Influence of nonmagnetic Al ions on magnetoresistance of double-perovskite Sr2Fe1−xAlxMoO6 (0≤x≤0.30)

C. Ong, Z. Lü, Xiqiang Huang, 2005 .

Synthesis and characteristics of nanocrystalline YSZ by homogeneous precipitation and its electrical properties

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2006 .

Fabrication and thermoelectric properties of highly textured Ca9Co12O28 ceramic

Z. Lü, Xiqiang Huang, B. Wei, 2006 .

Effects of anode surface modification on the performance of low temperature SOFCs

Xiaobo Du, Z. Lü, Kongfa Chen, 2007 .

In situ growth of copper-iron bimetallic nanoparticles in A-site deficient Sr2Fe1.5Mo0.5O6-δ as an active anode material for solid oxide fuel cells

Shuai Wang, Xiang Yu, Z. Lü, 2022, Journal of Alloys and Compounds.

Cobalt-free fluorine doped Bi0.7Sr0.3FeO3- oxides for energetic cathodes of low-temperature solid oxide fuel cells

Z. Lü, B. Wei, Mengke Yuan, 2023, Chemical Engineering Journal.

A cobalt-free bismuth ferrite-based cathode for intermediate temperature solid oxide fuel cells

Z. Lü, B. Wei, Zhiping Zhang, 2021 .

Preparation of LSM-Nano-Film via a Water-Based Impregnation Process and Its Application onto Porous LSCF Cathode

Xingbao Zhu, L. Zhen, Z. Lü, 2013 .

Synthesis and luminescence of europium doped yttria nanophosphors via a sucrose-templated combustion method

Yungang Zhang, Z. Lü, B. Wei, 2006 .

Enhanced photocatalytic activity of flowerlike Cu2O/Cu prepared using solvent-thermal route

Z. Lü, Xiqiang Huang, W. Su, 2011 .

Influence of the sintering temperature on electrical property of the Ce0.8Sm0.1Y0.1O1.9 electrolyte

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2007 .

Fabrication of dense YSZ electrolyte membranes by a modified dry-pressing using nanocrystalline powders

Z. Lü, Xiqiang Huang, W. Su, 2007 .

Study on La and Y co-doped ceria-based electrolyte materials

Z. Lü, Xiqiang Huang, W. Su, 2007 .

Preparation and properties of rare earth co-doped Ce0.8Sm0.2-xYxO1.9 electrolyte materials for SOFC

Z. Lü, Xiqiang Huang, W. Su, 2006 .

Thermal and Electrical Properties of New Cathode Material Ba0.5Sr0.5Co0.8Fe0.2O3 − δ for Solid Oxide Fuel Cells

Keyan Liu, Z. Lü, B. Wei, 2005 .

Direct growth of Ni–Fe phosphides nanohybrids on NiFe foam for highly efficient water oxidation

Z. Lü, B. Wei, Mengke Yuan, 2020 .

Ag2O–Bi2O3 composites: synthesis, characterization and high efficient photocatalytic activities

Z. Lü, B. Wei, Hong Gao, 2012 .

Electrochemical performance of La0.65Sr0.35MnO3 oxygen electrode with alternately infiltrated Sm0.5Sr0.5CoO3-δ and Sm0.2Ce0.8O1.9 nanoparticles for reversible solid oxide cells

Z. Lü, Yanting Tian, Pingping Wu, 2021, International Journal of Hydrogen Energy.

Advanced Technologies for High-Temperature Solid Oxide Fuel Cells

Z. Lü, B. Wei, Zhihong Wang, 2015 .

Compaction pressure effect on microstructure and electrochemical performance of GdBaCo2O5+δ cathode for IT-SOFCs

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2012 .

Enhanced Performance of Solid Oxide Fuel Cell by Manipulating the Orientation of Cylindrical Pores in Anode Substrate

W. Pan, Z. Lü, B. Wei, 2012 .

Characterization of GdBaCo2O5+δ cathode for IT-SOFCs

Yaohui Zhang, Z. Lü, Kongfa Chen, 2008 .

Thermal, electrical, and electrochemical properties of Lanthanum-doped Ba0.5Sr0.5 Co0.8Fe0.2O3–δ

Z. Lü, Xiqiang Huang, B. Wei, 2007 .

Yeast-derived active carbon as sustainable high-performance electrodes for lithium–oxygen batteries

Xingbao Zhu, Z. Lü, Yuanguo Wu, 2018 .

GdBaCo2O5+δ-Sm0.2Ce0.8O1.9 composite cathodes for intermediate temperature SOFCs

Z. Lü, Xiqiang Huang, B. Wei, 2011 .

Study on Ba0.5Sr0.5Co0.8Fe0.2O3−δ–Sm0.5Sr0.5CoO3−δ composite cathode materials for IT-SOFCs

Z. Lü, Kongfa Chen, Xiqiang Huang, 2008 .

Waste Biomass Derived Active Carbon as Cost-Effective and Environment-Friendly Cathode Material for Lithium-Oxygen Batteries

Xingbao Zhu, Z. Lü, Changsong Dai, 2021 .

Study on properties of the single-phase cubic Ce0.5Zr0.5O2 solid solution

Dapeng Xu, Z. Lü, W. Su, 2002 .

Performance evolution of NiO/yttria-stabilized zirconia anodes fabricated at different compaction pressures

Z. Lü, Kongfa Chen, Xiqiang Huang, 2009 .

Verification and applicability of symmetric cell configuration for mechanistic study of oxygen electrode reactions of solid oxide cells

S. Jiang, W. Pan, Z. Lü, 2020, Solid State Ionics.

Effects of a YSZ porous layer between electrolyte and oxygen electrode in solid oxide electrolysis cells on the electrochemical performance and stability

Z. Lü, Chaoqi Wang, Huan-Huan Li, 2019, International Journal of Hydrogen Energy.

Development of LSM-based cathodes for solid oxide fuel cells based on YSZ films

Xiaobo Du, Z. Lü, Kongfa Chen, 2007 .

Effect of starting powder on screen-printed YSZ films used as electrolyte in SOFCs

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2006 .

Characterization of YSZ electrolyte membrane tubes prepared by a vacuum casting method

T. He, P. Guan, Z. Lü, 2002 .

Synthesis, electrical and electrochemical properties of Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite oxide for IT-SOFC cathode

Z. Lü, Xiqiang Huang, B. Wei, 2008 .

Ba0.5Sr0.5Zn0.2Fe0.8O3−δ Perovskite Oxide as a Novel Cathode for Intermediate‐Temperature Solid‐Oxide Fuel Cells

Z. Lü, Xiqiang Huang, B. Wei, 2007 .

Oxygen adsorption on the Ag/La1−xSrxMnO3(0 0 1) catalysts surfaces: A first-principles study

Xingbao Zhu, Z. Lü, Xiqiang Huang, 2012 .

Influence of synthesis routes on the performance from weakly agglomerated yttria-stabilized zirconia nanomaterials

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2006 .

The Pr4+ ions in Mg doped PrGaO3 perovskites

T. He, Z. Lü, Xiqiang Huang, 2004 .

Effects of sucrose concentration on morphology and luminescence performance of Gd2O3:Eu nanocrystals

Yungang Zhang, Z. Lü, B. Wei, 2008 .

Factors controlling pure-phase multiferroic BiFeO3 powders synthesized by chemical co-precipitation

Yu Zhou, D. Jia, Z. Lü, 2011 .

Effect of synthesis conditions on the performance of weakly agglomerated nanocrystalline NiO

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2007 .

Performances of Ba0.5Sr0.5Co0.6Fe0.4O3-δ -Ce0.8Sm0.2O1.9 composite cathode materials for IT-SOFC

Z. Lü, Xiqiang Huang, B. Wei, 2008 .

Specific heat of single-crystal PrMnO3

Z. Lü, W. Su, J. G. Cheng, 2005, Journal of physics. Condensed matter : an Institute of Physics journal.

Behavior of 3 mol% yttria-stabilized tetragonal zirconia polycrystal film prepared by slurry spin coating

Z. Lü, Kongfa Chen, Xiqiang Huang, 2009 .

Effects of Initial Reduction Temperature on the Microstructures and Performances of Ni/YSZ Anodes for Solid Oxide Fuel Cells

Xingbao Zhu, Z. Lü, W. Su, 2013 .

Magnetic properties and colossal magnetoresistance of La5/6Na1/6Mn1−yFeyO3 with 0 ≤ y ≤ 0.10

Z. Lü, W. Su, Zhiguo Liu, 2007 .

Electrochemical performance evaluation of FeCo2O4 spinel composite cathode for solid oxide fuel cells

Z. Lü, Chaoqi Wang, Huan-Huan Li, 2020 .

Co‐synthesis of Sm0.5Sr0.5CoO3‐Sm0.2Ce0.8O1.9 Composite Cathode with Enhanced Electrochemical Property for Intermediate Temperature SOFCs

Z. Lü, B. Wei, Z. Wang, 2014 .

Schottky-like anomaly in the low-temperature specific heat of single-crystal NdMnO3

Z. Lü, Xiqiang Huang, W. Su, 2005 .

Phase separation, low-field magnetic and transport properties of Pr0.75Na0.25Mn0.9Fe0.1O3

Z. Lü, W. Su, J. Miao, 2006 .

Anodic polarization induced performance loss in GdBaCo2O5+δ oxygen electrode under solid oxide electrolysis cell conditions

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2018 .

High pressure and high temperature synthesis and characterization of a new mixed valence perovskite oxide Eu0.62K0.38TiO3

Z. Lü, Xiqiang Huang, W. Su, 2005 .

Screen-printed thin YSZ films used as electrolytes for solid oxide fuel cells

Wenhui Su, Jiahuan Xu, Yaohui Zhang, 2006 .

A Ni/YSZ composite containing Ce0.9Ca0.1O2−δ particles as an anode for SOFCs

Zhiguo Zhang, Wenhui Su, Z. Lü, 2003 .

An anode for solid oxide fuel cells: NiO+(Ce0.9Ca0.1O1.9)0.25(YSZ)0.75 solid solution

Zhiguo Zhang, Wenhui Su, Z. Lü, 2003 .

Crystal structure, thermal expansion and electrical conductivity of perovskite oxides BaxSr1-xCo0.8Fe0.2O3-δ (0.3 ≤ x ≤ 0.7)

Z. Lü, Xiqiang Huang, B. Wei, 2006 .

Electrochemical p erformance of La2NiO4+δ-Ce0.55La0.45O2-δ as a promising bifunctional oxygen electrode for reversible solid oxide cells

Z. Lü, Wei Yang, Wenyan Zhao, 2021 .

Electrochemical performance and distribution of relaxation times analysis of tungsten stabilized La0·5Sr0·5Fe0·9W0·1O3-δ electrode for symmetric solid oxide fuel cells

Z. Lü, B. Wei, Shuai Wang, 2021, International Journal of Hydrogen Energy.

A novel La2NiO4+δ-La3Ni2O7-δ-Ce0.55La0.45O2-δ ternary composite cathode prepared by the co-synthesis method for IT-SOFCs

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2017 .

Mechanism and kinetics of Ni-Y2O3-ZrO2 hydrogen electrode for water electrolysis reactions in solid oxide electrolysis cells

S. Jiang, W. Pan, Z. Lü, 2016 .

A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2011 .

On the limiting factor of impregnation methods for developing Cu/CeO2 anodes for solid oxide fuel cells

Z. Lü, B. Wei, Wenyuan Li, 2018, Journal of Solid State Electrochemistry.

Effect of adding urea on performance of Cu/CeO2/yttria-stabilized zirconia anodes for solid oxide fuel cells prepared by impregnation method

Xingbao Zhu, Z. Lü, B. Wei, 2011 .

A highly stable of tungsten doped Pr0.6Sr0.4Fe0.9W0.1O3-δ electrode for symmetric solid oxide fuel cells

Shuai Wang, Yue Gao, Z. Lü, 2022, International Journal of Hydrogen Energy.

Investigation on a novel composite solid oxide fuel cell anode with La0.6Sr0.4Co0.2Fe0.8O3−δ derived phases

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2015 .

Development of yttria-stabilized zirconia thin films via slurry spin coating for intermediate-to-low temperature solid oxide fuel cells

Yaohui Zhang, Z. Lü, Kongfa Chen, 2006 .

Theoretical Study of Cubic and Orthorhombic Nd1–xSrxMnO3 as a Potential Solid Oxide Fuel Cell Cathode

Z. Lü, Z. Yang, D. Xu, 2015 .

First-principles study on the catalytic role of Ag in the oxygen adsorption of LaMnO3(0 0 1) surface

Z. Lü, Xiqiang Huang, W. Su, 2012 .

New insight into Li metal protection: Regulating the Li-ion flux via dielectric polarization

Jiujun Zhang, Xifei Li, Yaohui Zhang, 2021 .

Nanoscale metal oxide-based composite membranes with fast ion channel for Li metal protection

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2021, Ionics.

The comparative theoretical study of the LaBO3 (001) (B = Mn, Fe, Co, and Ni) surface properties and oxygen adsorption mechanisms

Z. Lü, B. Wei, Dan Xu, 2016, Ionics.

Investigations on Pr1.6Sr0.4NiO4–YSZ–Ag composite cathode for solid oxide fuel cells

Tingting Li, Z. Lü, Xiqiang Huang, 2010 .

La0.6PrSr0.4NiO4–Ce0.8Pr0.2O2 composite cathode for solid oxide fuel cell

L. Liang, Xingbao Zhu, Yaohui Zhang, 2015 .

Preparation and characteristics of Pr1.6Sr0.4NiO4+YSZ as composite cathode of solid oxide fuel cells

Tingting Li, Z. Lü, Xiqiang Huang, 2009 .

Novel in situ method (vacuum assisted electroless plating) modified porous cathode for solid oxide fuel cells

Z. Lü, Kongfa Chen, B. Wei, 2008 .

Electrochemical characteristics of Ba0.5Sr0.5Co0.8Fe0.2O3−δ–Sm0.2Ce0.8O1.9 composite materials for low-temperature solid oxide fuel cell cathodes

Z. Lü, Xiqiang Huang, B. Wei, 2006 .

A rapid preparation of acicular Ni impregnated anode with enhanced conductivity and operational stability

Xingbao Zhu, Z. Lü, B. Wei, 2014 .

Ag decorated (Ba,Sr)(Co,Fe)O3 cathodes for solid oxide fuel cells prepared by electroless silver deposition

S. Jiang, Ren Su, Yanbin Shen, 2013 .

Vacuum-assisted electroless copper plating on Ni/(Sm,Ce)O2 anodes for intermediate temperature solid oxide fuel cells

S. Jiang, Z. Lü, Kongfa Chen, 2011 .

Electrochemical performance of (Ba0.5Sr0.5)0.9Sm0.1Co0.8Fe0.2O3−δ as an intermediate temperature solid oxide fuel cell cathode

Z. Lü, Kongfa Chen, W. Su, 2007 .

Electronic structure and surface properties of PrMnO3 (001): A density functional theory study

Xingbao Zhu, Z. Lü, B. Wei, 2015 .

Accelerating effect of polarization on electrode/electrolyte interface generation and electrocatalytic performance of Er0.4Bi1.6O3 decorated Sm0.95CoO3-δ cathodes

S. Jiang, Z. Lü, Kongfa Chen, 2020 .

Synthesis and surface characteristics of CeTbO3+δ induced by femtosecond laser irradiation

C. Wahlström, Z. Lü, W. Su, 2007 .

Amplification of magnetoresistance of magnetite in an Fe3O4–SiO2–Si structure

Z. Lü, W. Su, R. Yu, 2008 .

Formation of hollow nanofiber rolls through controllable carbon diffusion for Li metal host

Xifei Li, F. Ding, Yaohui Zhang, 2020 .

High-pressure and high-temperature synthesis and characterization of mixed valence perovskite oxides LaTi1−xLixO3

Z. Lü, Xiqiang Huang, W. Su, 2007 .

Structure characteristics and valence state study for La1−xKxTiO3 synthesized under high-pressure and high-temperature

Z. Lü, Xiqiang Huang, W. Su, 2005 .

Effect of Nd-deficiency on electrochemical properties of NdBaCo2O6−δ cathode for intermediate-temperature solid oxide fuel cells

H Zhao, J. Bassat, S. Fourcade, 2016 .

Fabrication and performance of anode-supported YSZ films by slurry spin coating

Yaohui Zhang, Z. Lü, Kongfa Chen, 2007 .

A (La,Sr)MnO3 nano-film embedded into (Ba,Sr)(Co,Fe)O3 porous cathode for stability enhancement

Xingbao Zhu, Z. Lü, Yiqian Li, 2015 .

Sm0.5Sr0.5CoO3–Sm0.2Ce0.8O1.9 Composite Oxygen Electrodes for Solid Oxide Electrolysis Cells

Xingbao Zhu, Z. Lü, Xiqiang Huang, 2014 .

Experimental study on effect of compaction pressure on performance of SOFC anodes

Z. Lü, Kongfa Chen, Xiqiang Huang, 2008 .

Fabrication and evaluation of a Ni/La0.75Sr0.25Cr0.5Fe0.5O3−δ co-impregnated yttria-stabilized zirconia anode for single-chamber solid oxide fuel cells

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2010 .

Performance evaluation of an anode-supported solid oxide fuel cell with Ce0.8Sm0.2O1.9 impregnated GdBaCo2O5+δ cathode

Yaohui Zhang, W. Pan, Z. Lü, 2012 .

Formation and characterization of PrGa0.9Mg0.1O3 synthesized by a citric acid method

T. He, Dapeng Xu, Z. Lü, 2005 .

Tailoring tantalum doping into a perovskite ferrite to obtain a highly active and stable anode for solid oxide fuel cells

Z. Lü, B. Wei, Z. Fu, 2020 .

Sulfur poisoning and attempt of oxidative regeneration of La0.75Sr0.25Cr0.5Mn0.5O3−δ anode for solid oxide fuel cell

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2017 .

Improvement of output performance of solid oxide fuel cell by optimizing Ni/samaria-doped ceria anode functional layer

Z. Lü, Kongfa Chen, Xiqiang Huang, 2008 .

Cobalt-impregnated La0.75Sr0.25Cr0.5Mn0.5O3−δ anodes for solid oxide fuel cells

Xingbao Zhu, Z. Lü, Xiqiang Huang, 2014 .

Structure, electrical and thermal properties of (Ba0.5Sr0.5)1 − xGdxCo0.8Fe0.2O3 − δ perovskite as a solid-oxide fuel cell cathode

Z. Lü, Xiqiang Huang, B. Wei, 2012 .

Electrical and thermal properties of (Ba0.5Sr0.5) 1−xSmxCo0.8Fe0.2O3−δ perovskite oxides

Z. Lü, Xiqiang Huang, B. Wei, 2007 .

Adsorption of Sulfur‐Containing Species on LaCrO3 (001) Surface: A First‐Principles Study

Z. Lü, B. Wei, W. Su, 2013 .

Oxygen Diffusivity of La0.6Sr0.4Co0.2Fe0.8O3-δ Perovskite Oxide

Z. Lü, Yan Liu, 2012 .

Performance of the Single-Chamber Solid Oxide Fuel Cell with a La0.75Sr0.25Cr0.5Mn0.5O3 − δ -Based Perovskite Anode

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2010 .

Sulfur poisoning and the regeneration of the solid oxide fuel cell with metal catalyst-impregnated La0.75Sr0.25Cr0.5Mn0.5O3-δ anode

Z. Lü, Shuxia Li, Yiqian Li, 2020 .

Regeneration of sulfur poisoned La0.75Sr0.25Cr0.5Mn0.5O3-δ anode of solid oxide fuel cell using electrochemical oxidative method

Z. Lü, Zishi Jiang, Yiqian Li, 2019, Electrochimica Acta.

Titanium-substituted lanthanum strontium ferrite as a novel electrode material for symmetrical solid oxide fuel cell

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2015 .

Performance and sulfur poisoning of Ni/CeO2 impregnated La0.75Sr0.25Cr0.5Mn0.5O3−δ anode in solid oxide fuel cells

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2015 .

Direct Flame SOFCs with La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta)/Ni Coimpregnated Yttria-Stabilized Zirconia Anodes Operated on Liquefied Petroleum Gas Flame

Xingbao Zhu, Z. Lü, Xiqiang Huang, 2010 .

Development of La0.6Sr0.4Co0.2Fe0.8O3−δ cathode with an improved stability via La0.8Sr0.2MnO3-film impregnation

Dong Ding, Liang Zhen, Wenhui Su, 2013 .

Pr and Ti co-doped Strontium Ferrite as a Novel Hydrogen Electrode for Solid Oxide Electrolysis Cell

Xingbao Zhu, Z. Lü, Xiqiang Huang, 2017 .

Anode-supported solid oxide fuel cell based on dense electrolyte membrane fabricated by filter-coating

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2006 .

High activity oxide Pr0.3Sr0.7Ti0.3Fe0.7O3−δ as cathode of SOEC for direct high-temperature steam electrolysis

Z. Lü, Zhihong Wang, Lin Zhu, 2017 .

The effect of surface modification on the morphology and magnetic properties of NiFe2O4 nanoparticles

Z. Lü, W. Su, Hongxia Wang, 2006 .

Effects of nonstoichiometry on the properties of electron-doped manganite Pr0.1Ca0.9MnO3

Z. Lü, Xiqiang Huang, W. Su, 2009 .

Redox sculptured dual-scale porous nickel-iron foams for efficient water oxidation

Ren Su, Z. Lü, B. Wei, 2019, Electrochimica Acta.

Cellular Ni sheet created by a simple oxidation-reduction process for enhanced supercapacitor performance

Yaohui Zhang, Z. Lü, Zhihong Wang, 2017 .

Safe and Energy-Dense Flexible Solid-State Lithium–Oxygen Battery with a Structured Three-Dimensional Polymer Electrolyte

Xingbao Zhu, Z. Lü, Yuanguo Wu, 2022, ACS Sustainable Chemistry & Engineering.

A highly efficient biomass based electrocatalyst for cathodic performance of lithium–oxygen batteries: Yeast derived hydrothermal carbon

Xingbao Zhu, Z. Lü, Changsong Dai, 2020 .

Carbon Decorated Ni(OH)2 Nanoflakes on Ni Foam as a Binder-Free Cathode for Lithium–Oxygen Batteries

Xingbao Zhu, Z. Lü, Zhihong Wang, 2021 .

Nanoarchitectured CNTs-Grafted Graphene Foam with Hierarchical Pores as a Binder-Free Cathode for Lithium-Oxygen Batteries

Xingbao Zhu, Z. Lü, Yuanguo Wu, 2018 .

Advanced Engineering for Cathode in Lithium–Oxygen Batteries: Flexible 3D Hierarchical Porous Architecture Design and Its Functional Modification

Xingbao Zhu, Z. Lü, Yuanguo Wu, 2021, Advanced Functional Materials.

YSZ films fabricated by a spin smoothing technique and its application in solid oxide fuel cell

Z. Lü, Kongfa Chen, Xiqiang Huang, 2007 .

Performance evaluation of thin membranes solid oxide fuel cell prepared by pressure-assisted slurry-casting

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2008 .

Understanding the Relationships between Morphology, SEI Composition and Coulombic Efficiency of Lithium Metal.

Xifei Li, Yaohui Zhang, Z. Lü, 2020, ACS applied materials & interfaces.

Functionally graded cathodes based on double perovskite type GdBaCo2O5+δ oxide

Xingbao Zhu, Z. Lü, B. Wei, 2014 .

Effect of characteristics of (Sm,Ce)O2 powder on the fabrication and performance of anode-supported solid oxide fuel cells

Shaomin Liu, S. Jiang, Z. Lü, 2012 .

Thermally driven long–distance elemental diffusion enhances the sinterability of anode and electrolyte of metal–supported solid oxide fuel cells

S. Jiang, Z. Lü, Kongfa Chen, 2023, Journal of Power Sources.

Heterostructural Ni3S2–Fe5Ni4S8 hybrids for efficient electrocatalytic oxygen evolution

Z. Lü, B. Wei, Yanyan Wu, 2020, Journal of Materials Science.

Effects of pre-calcined YSZ powders at different temperatures on Ni–YSZ anodes for SOFC

Z. Lü, W. Su, Zhiguo Liu, 2006 .

Layered perovskite oxide PrBaCo2O5+δ as a potential cathode for lithium–oxygen batteries: High-performance bi-functional electrocatalysts

Xingbao Zhu, Z. Lü, Xi Pan, 2019, Materials Letters.

Thermal expansion and electrochemical properties of Ni-doped GdBaCo2O5+δ double-perovskite type oxides

Yaohui Zhang, D. Jia, Z. Lü, 2010 .

Oxygen pump method for leak rate testing of SiO2-B2O3-Al2O3-BaO-PbO2-ZnO glass sealant for SOFC

Z. Lü, B. Wei, W. Su, 2008 .

Characteristics of a SiO2–B2O3–Al2O3–BaCO3–PbO2–ZnO glass–ceramic sealant for SOFCs

Z. Lü, Xiqiang Huang, B. Wei, 2007 .

Study of slurry spin coating technique parameters for the fabrication of anode-supported YSZ Films for SOFCs

Yaohui Zhang, Z. Lü, Kongfa Chen, 2007 .

Investigation of a solid oxide fuel cells catalyst LaSrNiO4: Electronic structure, surface segregation, and oxygen adsorption

Z. Lü, B. Wei, Dan Xu, 2016 .

Enhanced density of sol–gel derived La0.8S0.2MnO3 thin film with an electric field assisted deposition

Meilin Liu, Xingbao Zhu, Z. Lü, 2013 .

Cr deposition on porous La0.6Sr0.4Co0.2Fe0.8O3 − δ electrodes of solid oxide cells under open circuit condition

Z. Lü, Kongfa Chen, B. Wei, 2015 .

Performance degradation of SmBaCo2O5+δ cathode induced by chromium deposition for solid oxide fuel cells

Z. Lü, Kongfa Chen, B. Wei, 2015 .

The electronic properties and structural stability of LaFeO3 oxide by niobium doping: A density functional theory study

Z. Lü, B. Wei, Dan Xu, 2021 .

Ba and Gd Doping Effect in (BaxSr1–x)0.95Gd0.05Co0.8Fe0.2O3–δ (x = 0.1–0.9) Cathode on the Phase Structure and Electrochemical Performance

X. Zhu, Xingbao Zhu, Yaohui Zhang, 2012 .

In situ fabrication of porous graphene electrodes for high-performance lithium oxygen batteries

Xingbao Zhu, Z. Lü, Xiqiang Huang, 2018, International Journal of Hydrogen Energy.

Highly active and stable tin-doped perovskite-type oxides as cathode materials for solid oxide fuel cells

Z. Lü, Huan-Huan Li, 2020 .

Surface regulating of copper-iron nanoparticles bimetallic exsolution for enhanced performance and durability of double perovskite anode in solid oxide fuel cells

Shuai Wang, Z. Lü, B. Wei, 2023, Fuel.

Enhanced electrochemical performance of co-synthesized La2NiO4+δ-Ce0.55La0.45O2-δ composite cathode for IT-SOFCs

Xingbao Zhu, Yaohui Zhang, Z. Lü, 2017 .

High-performance fluorine-doped cobalt-free oxide as a potential cathode material for solid oxide fuel cells

Z. Lü, Huan-Huan Li, 2020 .

Development of Single‐Chamber Solid Oxide Fuel Cells: Performance Optimization and Micro‐Stack Designs

D. Jia, Z. Lü, Xiqiang Huang, 2010 .

Anode-Supported Micro-SOFC Stacks Operated under Single-Chamber Conditions

Z. Lü, Kongfa Chen, Xiqiang Huang, 2007 .

Study of a Single‐Chamber Solid Oxide Fuel Cell Microstack with V‐Shaped Congener‐Electrode‐Facing Configuration

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2012 .

A highly stable cobalt-free LaBa0.5Sr0.5Fe2O6-δ oxide as a high performance cathode material for solid oxide fuel cells

Z. Lü, Huan-Huan Li, 2020 .

Performance evaluation of carbon/PrBaCo2O5+δ composite electrodes for Li–O2 batteries

Xingbao Zhu, Z. Lü, Ting Chen, 2021 .

Chromium deposition and poisoning at La0.6Sr0.4Co0.2Fe0.8O(3-δ) oxygen electrodes of solid oxide electrolysis cells.

Z. Lü, Kongfa Chen, B. Wei, 2015, Physical chemistry chemical physics : PCCP.

Performance degradation of double-perovskite PrBaCo 2 O 5+δ oxygen electrode in CO 2 containing atmospheres

Yaohui Zhang, Z. Lü, Xiqiang Huang, 2017 .

Study on impedance spectra of La0.7Sr0.3MnO3 and Sm0.2Ce0.8O1.9-impregnated La0.7Sr0.3MnO3 cathode in single chamber fuel cell condition

Z. Lü, Kongfa Chen, Xiqiang Huang, 2009 .

The phase transition in PrGa0.95Mg0.05O3 at elevated temperatures

Zhenhua Ni, Z. Lü, Xiqiang Huang, 2009 .

Research of processing techniques used in fabrication of solid oxide fuel cells and study of their selected properties

Xin Zhao, Z. Lü, W. Su, 1998 .

Performance of Ba0.5Sr0.5Co0.8Fe0.2O3-δ-Ag Composite Cathode Materials for IT-SOFCs

Xin Zhang, L. Wang, Z. Lü, 2011 .

Study on Novel Composite Cathode Materials Doped with Bi2O3 for SOFC

Z. Lü, 2001 .

The electronic structure and the oxygen adsorption at BaO terminated surface of GdBaCo2O5.5: A first principles study

Z. Lü, B. Wei, Dan Xu, 2020 .

The Interaction of Noble Metal With La1–xSrxMnO3 (001) Surface and Catalytic Role for Oxygen Adsorption: A Density Functional Theory Study

Dong Yang, Xingbao Zhu, Z. Lü, 2012, Fuel Cells.

CNTs-grafted cotton fabrics as binder-free, free-standing and cost-efficient cathodes for flexible Li-O2 batteries

Xingbao Zhu, Z. Lü, X. Ji, 2018, Materials Letters.

Preparation and Performance Test of Ni-Fe/SDC Cell Anode

Zhiming Liu, Lili Liu, Z. Lü, 2006 .

Solid oxide fuel cells with dense yttria-stabilized zirconia electrolyte membranes fabricated by a dry pressing process

Yaohui Zhang, Z. Lü, Kongfa Chen, 2006 .

Influence of doping Al on the magnetoresistance of polycrystalline Sr2FeMoO6

Z. Lü, Xiqiang Huang, W. Su, 2005 .

Corrigendum to “Development of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3−δ cathode with an improved stability via La 0.8 Sr 0.2 MnO 3 -film impregnation” [Int J Hydrogen Energy 38 (2013) 5375–5382]

Xingbao Zhu, L. Zhen, Z. Lü, 2013 .