Honglin Luo

发表

Submicrofiber‐Incorporated 3D Bacterial Cellulose Nanofibrous Scaffolds with Enhanced Cell Performance

Y. Wan, T. Cui, Quanchao Zhang, 2018, Macromolecular Materials and Engineering.

In situ phosphorus K-edge X-ray absorption spectroscopy studies of calcium–phosphate formation and transformation on the surface of bacterial cellulose nanofibers

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Cellulose.

Preparation and characterization of bacterial cellulose/heparin hybrid nanofiber for potential vascular tissue engineering scaffolds

Y. Wan, Honglin Luo, Chuan Gao, 2011 .

A general strategy of decorating 3D carbon nanofiber aerogels derived from bacterial cellulose with nano-Fe3O4 for high-performance flexible and binder-free lithium-ion battery anodes

Guangyao Xiong, Zhiwei Yang, Y. Wan, 2015 .

One-step in situ biosynthesis of graphene oxide-bacterial cellulose nanocomposite hydrogels.

Y. Wan, Zhiwei Yang, Honglin Luo, 2014, Macromolecular rapid communications.

Encapsulating doxorubicin-intercalated lamellar nanohydroxyapatite into PLGA nanofibers for sustained drug release

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2019, Current Applied Physics.

Application of Polyaniline for Li-Ion Batteries, Lithium-Sulfur Batteries, and Supercapacitors.

Tingting Li, Y. Wan, Zhiwei Yang, 2019, ChemSusChem.

Effect of Sisal Fibre Hybridisation on Static and Dynamic Mechanical Properties of Corn/Sisal/Polylactide Composites

Y. Wan, Honglin Luo, Guang-yao Xiong, 2017 .

Morphology and cell responses of three-dimensional porous silica nanofibrous scaffold prepared by sacrificial template method

Yong Zhu, Y. Wan, Fanglian Yao, 2017 .

Improved properties of corn fiber-reinforced polylactide composites by incorporating silica nanoparticles at interfaces

Y. Wan, Zhiwei Yang, Fanglian Yao, 2020, Polymers and Polymer Composites.

Effects of alkali and alkali/silane treatments of corn fibers on mechanical and thermal properties of its composites with polylactic acid

Y. Wan, Honglin Luo, Guang-yao Xiong, 2016 .

Mechanical and thermo-mechanical behaviors of sizing-treated corn fiber/polylactide composites

Y. Wan, Fanglian Yao, Honglin Luo, 2014 .

Controlled template synthesis of lamellar hydroxyapatite nanoplates as a potential carrier for gene delivery

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015 .

Synthesis of a three-dimensional network-structured scaffold built of silica nanotubes for potential bone tissue engineering applications

Ping Liu, Y. Wan, Zhiwei Yang, 2015 .

An Efficient Route for the Synthesis of Aluminum Nitride/Graphene Nanohybrids

Y. Wan, Honglin Luo, Zhifang Gao, 2014 .

Low adhesion superhydrophobic AZ31B magnesium alloy surface with corrosion resistant and anti-bioadhesion properties

Y. Wan, Quanchao Zhang, Honglin Luo, 2020 .

Mechanical, moisture absorption, and photodegradation behaviors of bacterial cellulose nanofiber‐ reinforced unsaturated polyester composites

Y. Wan, Honglin Luo, Chuan Gao, 2011 .

A rhBMP-2-loaded three-dimensional mesoporous bioactive glass nanotubular scaffold prepared from bacterial cellulose

Y. Wan, Quanchao Zhang, Fanglian Yao, 2019, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

Layered nanohydroxyapatite as a novel nanocarrier for controlled delivery of 5-fluorouracil.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2016, International journal of pharmaceutics.

Facile synthesis of ZnFe2O4/reduced graphene oxide nanohybrids for enhanced microwave absorption properties

Y. Wan, Zhiwei Yang, Honglin Luo, 2015 .

Wrapping mesoporous Fe2O3 nanoparticles by reduced graphene oxide: Enhancement of cycling stability and capacity of lithium ion batteries by mesoscopic engineering

Y. Wan, Zhiwei Yang, Fanglian Yao, 2018, Ceramics International.

Engineering carbon fibers with dual coatings of FeCo and CuO towards enhanced microwave absorption properties

Y. Wan, T. Cui, Honglin Luo, 2016 .

Microwave absorption properties of FeCo-coated carbon fibers with varying morphologies

Y. Wan, Honglin Luo, Guang-yao Xiong, 2016 .

Facile preparation and extraordinary microwave absorption properties of carbon fibers coated with nanostructured crystalline SnO2

Y. Wan, Zhiwei Yang, Honglin Luo, 2014 .

The electrochemical preparation and microwave absorption properties of magnetic carbon fibers coated with Fe3O4 films

Y. Wan, Honglin Luo, Qunyin Li, 2011 .

Preparation, structural characterization, and in vitro cell studies of three-dimensional SiO2-CaO binary glass scaffolds built ofultra-small nanofibers.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2017, Materials science & engineering. C, Materials for biological applications.

Scalable synthesis of robust and stretchable composite wound dressings by dispersing silver nanowires in continuous bacterial cellulose

Yong Zhu, Y. Wan, Zhiwei Yang, 2020 .

Evolution of morphology of bacterial cellulose scaffolds during early culture.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Carbohydrate polymers.

Fabrication of Robust, Shape Recoverable, Macroporous Bacterial Cellulose Scaffolds for Cartilage Tissue Engineering.

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2021, Macromolecular bioscience.

Ultrathin, Strong, and Highly Flexible Ti3C2Tx MXene/Bacterial Cellulose Composite Films for High-Performance Electromagnetic Interference Shielding.

F. M. Gama, Yunhua Xu, Y. Wan, 2021, ACS nano.

Laser-induced wettability gradient surface on NiTi alloy for improved hemocompatibility and flow resistance.

Jianye Zhou, Y. Wan, Quanchao Zhang, 2020, Materials science & engineering. C, Materials for biological applications.

Air DBD plasma treatment on three-dimensional braided carbon fiber-reinforced PEEK composites for enhancement of in vitro bioactivity

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014 .

Immobilization of gelatin on bacterial cellulose nanofibers surface via crosslinking technique

Y. Huang, Y. Wan, Honglin Luo, 2012 .

The inhibition of lamellar hydroxyapatite and lamellar magnetic hydroxyapatite on the migration and adhesion of breast cancer cells

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Journal of Materials Science: Materials in Medicine.

Chemisorption of polysulfides by keto groups modified Li4Ti5O12 nanofibers with 3D interwove network structure for LSBs

Y. Wan, Honglin Luo, Xiaohong Sun, 2022, Chemical Engineering Journal.

Enwrapping Polydopamine on Doxorubicin-Loaded Lamellar Hydroxyapatite/Poly(lactic-co-glycolic acid) Composite Fibers for Inhibiting Bone Tumor Recurrence and Enhancing Bone Regeneration.

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2021, ACS applied bio materials.

Introduction of broad spectrum antibacterial properties to bacterial cellulose nanofibers via immobilising ε-polylysine nanocoatings

Y. Wan, Honglin Luo, Chuan Gao, 2014 .

Preparation and characterization of TiO2/polystyrene core–shell nanospheres via microwave-assisted emulsion polymerization

Y. Wan, J. Sheng, Honglin Luo, 2008 .

Plasma polymerization of styrene with carbon dioxide under glow discharge conditions

Y. Wan, J. Sheng, Honglin Luo, 2007 .

Manipulating thermal conductivity of polyimide composites by hybridizing micro- and nano-sized aluminum nitride for potential aerospace usage

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2020, Journal of Thermoplastic Composite Materials.

Applications of Pyrolytic Polyaniline for Renewable Energy Storage

Y. Wan, Zhiwei Yang, Honglin Luo, 2018, ChemElectroChem.

Bioactive glass nanotube scaffold with well-ordered mesoporous structure for improved bioactivity and controlled drug delivery

Y. Wan, Zhiwei Yang, Fanglian Yao, 2019, Journal of Materials Science & Technology.

Self-assembled magnetic lamellar hydroxyapatite as an efficient nano-vector for gene delivery

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015 .

Incorporation of hydroxyapatite into nanofibrous PLGA scaffold towards improved breast cancer cell behavior

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2019, Materials Chemistry and Physics.

Synthesis of ZnO by Chemical Bath Deposition in the Presence of Bacterial Cellulose

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Acta Metallurgica Sinica (English Letters).

Sacrificial template method for the synthesis of three-dimensional nanofibrous 58S bioglass scaffold and its in vitro bioactivity and cell responses

Y. Wan, Zhiwei Yang, Honglin Luo, 2017, Journal of biomaterials applications.

Constructing a highly bioactive 3D nanofibrous bioglass scaffold via bacterial cellulose-templated sol-gel approach

Yong Zhu, Y. Wan, Honglin Luo, 2016 .

Immobilization of lecithin on bacterial cellulose nanofibers for improved biological functions

Y. Wan, Fanglian Yao, Honglin Luo, 2015 .

Incorporation of dual nanoplatelets to a natural polymer for foldable, robust, bioactive, and biocompatible nacre-like nanocomposites

Y. Wan, Honglin Luo, Xiangbo Zhu, 2021 .

Synthesis and characterization of laminated hydroxyapatite/chitosan nanocomposites

Y. Wan, Honglin Luo, F. He, 2010 .

Synthesis of intercalated lamellar hydroxyapatite/gelatin nanocomposite for bone substitute application

Y. Wan, Honglin Luo, Hui Liang, 2009 .

Engineering photoluminescent and magnetic lamellar hydroxyapatite by facile one-step Se/Gd dual-doping.

Y. Wan, Zhiwei Yang, Honglin Luo, 2018, Journal of materials chemistry. B.

Preparation of SnO2-coated carbonyl iron flaky composites with enhanced microwave absorption properties

Y. Wan, Honglin Luo, Xiaobing Wu, 2013 .

Preparation and performance of long carbon fiber reinforced polyamide 6 composites injection-molded from core/shell structured pellets

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014 .

Preparation of three-dimensional braided carbon fiber-reinforced PEEK composites for potential load-bearing bone fixations. Part I. Mechanical properties and cytocompatibility.

Y. Wan, Zhiwei Yang, Honglin Luo, 2014, Journal of the mechanical behavior of biomedical materials.

Hydrazine hydrate-induced hydrothermal synthesis of MnFe2O4 nanoparticles dispersed on graphene as high-performance anode material for lithium ion batteries

Y. Wan, Zhiwei Yang, Honglin Luo, 2017 .

Preparation of oriented bacterial cellulose nanofibers by flowing medium-assisted biosynthesis and influence of flowing velocity

Y. Wan, Zhiwei Yang, Honglin Luo, 2017 .

Scalable synthesis of three-dimensional interconnected mesoporous TiO2 nanotubes with ultra-large surface area

Ping Liu, Y. Wan, Zhiwei Yang, 2015 .

Innovative N-doped graphene-coated WS2 nanosheets on graphene hollow spheres anode with double-sided protective structure for Li-Ion storage

Tingting Li, Y. Wan, Zhiwei Yang, 2018, Electrochimica Acta.

Preparation and characterization of nano‐platelet‐like hydroxyapatite/gelatin nanocomposites

Xiaolei Li, Y. Wan, Honglin Luo, 2011 .

Preparation and properties of a novel porous poly(lactic acid) composite reinforced with bacterial cellulose nanowhiskers

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Fibers and Polymers.

Preparation and characterization of activated carbon fiber supporting silver-loaded mesoporous molecular sieves

Y. Wan, Honglin Luo, G. Cheng, 2001 .

Preparation and Characterization of Ti-10Mo Alloy by Mechanical Alloying

Y. Wan, Honglin Luo, Qunyin Li, 2012, Metallography, Microstructure, and Analysis.

Mechanical, moisture absorption, and biodegradation behaviours of bacterial cellulose fibre-reinforced starch biocomposites

Y. Wan, Honglin Luo, F. He, 2009 .

Moisture absorption in VARTMed three-dimensional braided carbon-epoxy composites with different interface conditions

Y. Huang, Y. Wan, Honglin Luo, 2006 .

Mechanical properties and cytotoxicity of nanoplate-like hydroxyapatite/polylactide nanocomposites prepared by intercalation technique.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015, Journal of the mechanical behavior of biomedical materials.

Characterization of biomedical hydroxyapatite/magnesium composites prepared by powder metallurgy assisted with microwave sintering

Wei Li, Chunzhi Li, Guangyao Xiong, 2016 .

One-pot synthesis of copper-doped mesoporous bioglass towards multifunctional 3D nanofibrous scaffolds for bone regeneration

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2020 .

Surface controlled calcium phosphate formation on three-dimensional bacterial cellulose-based nanofibers.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015, Materials science & engineering. C, Materials for biological applications.

Preparation and mineralization of three-dimensional carbon nanofibers from bacterial cellulose as potential scaffolds for bone tissue engineering

Y. Wan, Honglin Luo, K. Ren, 2011 .

Heparinization and hybridization of electrospun tubular graft for improved endothelialization and anticoagulation.

Y. Wan, Quanchao Zhang, Honglin Luo, 2021, Materials science & engineering. C, Materials for biological applications.

Preparation and characterization of a new biomedical magnesium–calcium alloy

Y. Wan, Honglin Luo, Guang-yao Xiong, 2008 .

Synthesis of aluminum nitride nanoparticles by a facile urea glass route and influence of urea/metal molar ratio

Y. Wan, Honglin Luo, Guang-yao Xiong, 2013 .

Mechanical and biological properties of bioglass/magnesium composites prepared via microwave sintering route

Yong Zhu, Wei Li, Chunzhi Li, 2016 .

Biofabrication of a novel bacteria/bacterial cellulose composite for improved adsorption capacity

Y. Wan, Peibiao Zhang, Quanchao Zhang, 2019, Composites Part A: Applied Science and Manufacturing.

Interpenetrated nano- and submicro-fibrous biomimetic scaffolds towards enhanced mechanical and biological performances.

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2020, Materials science & engineering. C, Materials for biological applications.

Fabrication of a novel hierarchical fibrous scaffold for breast cancer cell culture

Y. Wan, T. Cui, Quanchao Zhang, 2019 .

Influence of zinc ion implantation on surface nanomechanical performance and corrosion resistance of biomedical magnesium–calcium alloys

Y. Huang, Y. Wan, Honglin Luo, 2008 .

ZnO nanostructures grown on carbon fibers: Morphology control and microwave absorption properties

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014 .

Simultaneously depositing polyaniline onto bacterial cellulose nanofibers and graphene nanosheets toward electrically conductive nanocomposites

Y. Wan, Zhiwei Yang, Honglin Luo, 2018, Current Applied Physics.

Characterization of TEMPO-oxidized bacterial cellulose scaffolds for tissue engineering applications

Y. Wan, Fanglian Yao, Honglin Luo, 2013 .

Hierarchical porous bacterial cellulose scaffolds with natural biomimetic nanofibrous structure and a cartilage tissue-specific microenvironment for cartilage regeneration and repair.

Honglin Luo, You Wang, Xiaowei Xun, 2021, Carbohydrate polymers.

The synthesis of a new kind of magnetic coating on carbon fibers by electrodeposition

Y. Wan, Honglin Luo, F. He, 2012 .

Effects of fiber volume fraction, hot pressing parameters and alloying elements on tensile strength of carbon fiber reinforced copper matrix composite prepared by continuous three-step electrodeposition

Honglin Luo, G. Cheng, Y. L. Wang, 2000 .

One-step exfoliation and surface modification of lamellar hydroxyapatite by intercalation of glucosamine

Y. Wan, Honglin Luo, Guang-yao Xiong, 2016 .

Preparation and properties of polyamide 6 thermal conductive composites reinforced with fibers

Y. Wan, Honglin Luo, Guang-yao Xiong, 2013 .

Incorporating nanoplate-like hydroxyapatite into polylactide for biomimetic nanocomposites via direct melt intercalation

Y. Wan, Zhiwei Yang, Honglin Luo, 2020 .

Moisture absorption in a three-dimensional braided carbon/Kevlar/epoxy hybrid composite for orthopaedic usage and its influence on mechanical performance

G. C. Chen, Y. Wan, Honglin Luo, 2006 .

The Trade-Offs in the Design of Reversible Zinc Anodes for Secondary Alkaline Batteries

Y. Wan, Zhiwei Yang, Honglin Luo, 2021, Electrochemical Energy Reviews.

Facile and scalable production of three-dimensional spherical carbonized bacterial cellulose/graphene nanocomposites with a honeycomb-like surface pattern as potential superior absorbents

Yong Zhu, Y. Wan, Honglin Luo, 2015 .

Bacterial cellulose/graphene oxide nanocomposite as a novel drug delivery system

Yong Zhu, Y. Wan, Honglin Luo, 2017 .

Layer-by-Layer Assembled Bacterial Cellulose/Graphene Oxide Hydrogels with Extremely Enhanced Mechanical Properties

Xinhua Xu, Y. Wan, Zhiwei Yang, 2018, Nano-micro letters.

Effect of coupling treatment on mechanical properties of bacterial cellulose nanofibre-reinforced UPR ecocomposites

Xiaolei Li, Y. Wan, Honglin Luo, 2009 .

Layer-by-Layer Assembled Bacterial Cellulose/Graphene Oxide Hydrogels with Extremely Enhanced Mechanical Properties

Jian Hu, Xinhua Xu, Fanglian Yao, 2018, Nano-Micro Letters.

Porous nanoplate-like hydroxyapatite–sodium alginate nanocomposite scaffolds for potential bone tissue engineering

Y. Wan, Honglin Luo, Guang-yao Xiong, 2017 .

An ultralight and highly compressible anode for Li-ion batteries constructed from nitrogen-doped carbon enwrapped Fe3O4 nanoparticles confined in a porous 3D nitrogen-doped graphene network

Yong Zhu, Y. Wan, Zhiwei Yang, 2017 .

Synthesis and characterization of three-dimensional porous graphene oxide/sodium alginate scaffolds with enhanced mechanical properties

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014 .

Constructing 3D bacterial cellulose/graphene/polyaniline nanocomposites by novel layer-by-layer in situ culture toward mechanically robust and highly flexible freestanding electrodes for supercapacitors

Y. Wan, Zhiwei Yang, Honglin Luo, 2018 .

Conductive Polypyrrole Coated Hollow NiCo2O4Microspheres as Anode Material with Improved Pseudocapacitive Contribution and Enhanced Conductivity for Lithium‐Ion Batteries

Tingting Li, Y. Wan, Zhiwei Yang, 2018, ChemElectroChem.

Effect of highly dispersed graphene and graphene oxide in 3D nanofibrous bacterial cellulose scaffold on cell responses: A comparative study

Y. Wan, Zhiwei Yang, Fanglian Yao, 2019, Materials Chemistry and Physics.

Novel porous graphene oxide and hydroxyapatite nanosheets-reinforced sodium alginate hybrid nanocomposites for medical applications

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015 .

Fabrication of flexible, ultra-strong, and highly conductive bacterial cellulose-based paper by engineering dispersion of graphene nanosheets

J. Xie, Yong Zhu, Y. Wan, 2019, Composites Part B: Engineering.

Enhancement of mechanical and biological properties of calcium phosphate bone cement by incorporating bacterial cellulose

Y. Wan, Quanchao Zhang, Honglin Luo, 2019, Materials Technology.

Construction of superhydrophobic pyrolytic carbon by creating a biomimetic cobblestone surface pattern for improved hemocompatibility

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2023, Surface and Coatings Technology.

Enhanced biological behavior of bacterial cellulose scaffold by creation of macropores and surface immobilization of collagen

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015, Macromolecular Research.

A Novel in Vitro Three-Dimensional Macroporous Scaffolds from Bacterial Cellulose for Culture of Breast Cancer Cells

Y. Wan, Honglin Luo, Guang-yao Xiong, 2013 .

Directional fluid induced self-assembly of oriented bacterial cellulose nanofibers for potential biomimetic tissue engineering scaffolds

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015 .

Magnetic Lamellar Nano-Hydroxyapatite as a Vector for Gene Transfection in Three-Dimensional Cell Culture.

Wei Li, Y. Wan, Zhiwei Yang, 2018, Journal of nanoscience and nanotechnology.

Engineering bacteria for high-performance three-dimensional carbon nanofiber aerogel

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2021 .

Constructing three-dimensional nanofibrous bioglass/gelatin nanocomposite scaffold for enhanced mechanical and biological performance

Y. Wan, Zhiwei Yang, Fanglian Yao, 2017 .

Uniformly Dispersed Freestanding Carbon Nanofiber/Graphene Electrodes Made by a Scalable Biological Method for High‐Performance Flexible Supercapacitors

Zhiwei Yang, Yuan Huang, Jing Xie, 2018, Advanced Functional Materials.

Constructing superior carbon-nanofiber-based composite microwave absorbers by engineering dispersion and loading of Fe3O4 nanoparticles on three-dimensional carbon nanofibers derived from bacterial cellulose

Y. Wan, Zhiwei Yang, Honglin Luo, 2017 .

Three-dimensional porous nanocomposite of highly dispersed Fe3 O4 nanoparticles on carbon nanofibers for high-performance microwave absorbents

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015 .

Nanocubic CoFe2O4/graphene composite for superior lithium-ion battery anodes

Y. Wan, Zhiwei Yang, Honglin Luo, 2018, Synthetic Metals.

Improved Removal of Toxic Metal Ions by Incorporating Graphene Oxide into Bacterial Cellulose.

Y. Wan, Zhiwei Yang, Fanglian Yao, 2020, Journal of nanoscience and nanotechnology.

Step-by-step self-assembly of 2D few-layer reduced graphene oxide into 3D architecture of bacterial cellulose for a robust, ultralight, and recyclable all-carbon absorbent

Fanglian Yao, Jing Xie, Zhiwei Yang, 2018, Carbon.

Anchoring Fe 3 O 4 nanoparticles on three-dimensional carbon nanofibers toward flexible high-performance anodes for lithium-ion batteries

Y. Wan, Zhiwei Yang, Honglin Luo, 2015 .

Improved lithium and sodium ion storage properties of WS2 anode with three-layer shell structure

Tingting Li, Y. Wan, Zhiwei Yang, 2020 .

Novel ultra-thin ZnO nanosheets on carbon fiber: Preparation, characterization, and microwave absorption properties

Y. Wan, Zhiwei Yang, Honglin Luo, 2014 .

Effect of Graphene Oxide Incorporation into Electrospun Cellulose Acetate Scaffolds on Breast Cancer Cell Culture

Y. Wan, T. Cui, Quanchao Zhang, 2019, Fibers and Polymers.

Nitrogen-doped graphene enwrapped silicon nanoparticles with nitrogen-doped carbon shell: a novel nanocomposite for lithium-ion batteries

Y. Wan, Zhiwei Yang, Honglin Luo, 2016 .

Magnetic lamellar nanohydroxyapatite as a novel nanocarrier for controlled delivery of 5-fluorouracil

Yong Zhu, Y. Wan, T. Cui, 2017 .

Characterization of three‐dimensional braided polyethylene fiber–PMMA composites and influence of fiber surface treatment

Y. Huang, Y. Wan, Honglin Luo, 2006 .

Biocompatibility evaluation of bacterial cellulose as a scaffold material for tissue-engineered corneal stroma

Jingjie Cao, Y. Wan, Quanchao Zhang, 2020, Cellulose.

Creation of macropores in three-dimensional bacterial cellulose scaffold for potential cancer cell culture.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Carbohydrate polymers.

Incorporation of chondroitin sulfate into macroporous bacterial cellulose scaffold for improved bioactivity

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2023, Journal of Materials Research.

Modifying Porous Bacterial Cellulose with Chondroitin Sulfate/Gelatin for Improved Biocompatibility

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2023, Fibers and Polymers.

Microchannels in nano-submicro-fibrous cellulose scaffolds favor cell ingrowth

Yong Zhu, Y. Wan, T. Cui, 2021, Cellulose.

Comparison of mechanical performance and fracture behavior of gelatin composites reinforced with carbon fibers of different fiber architectures

Honglin Luo, G. Cheng, Y. L. Wang, 2001 .

Controllable synthesis of biomimetic nano/submicro-fibrous tubes for potential small-diameter vascular grafts.

Jianye Zhou, Y. Wan, Zhiwei Yang, 2020, Journal of materials chemistry. B.

Constructing a novel three-dimensional scaffold with mesoporous TiO2 nanotubes for potential bone tissue engineering.

Ping Liu, Y. Wan, Zhiwei Yang, 2015, Journal of materials chemistry. B.

Dealloying and polydopamine/silver coating on NiTi alloy for improved antibacterial activity

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2023, Materials Chemistry and Physics.

Simultaneous engineering of nanofillers and patterned surface macropores of graphene/hydroxyapatite/polyetheretherketone ternary composites for potential bone implants.

Y. Wan, Peibiao Zhang, Zhiwei Yang, 2021, Materials science & engineering. C, Materials for biological applications.

Hemodynamic evaluation of different stent graft schemes in aortic arch covered stent implantation

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2021, Medicine in Novel Technology and Devices.

Preparation and characterization of bacterial cellulose sponge with hierarchical pore structure as tissue engineering scaffold

Y. Wan, Honglin Luo, Chuan Gao, 2011 .

Preparation and characterization of a novel COL/BC composite for potential tissue engineering scaffolds

Y. Wan, Honglin Luo, Guang-yao Xiong, 2008 .

Effect of Si content on structure and electrochemical performance of ternary nanohybrids integrating Si nanoparticles, N-doped carbon shell, and nitrogen-doped graphene

Yong Zhu, Y. Wan, Zhiwei Yang, 2017, RSC Advances.

Dynamic interaction between the growing Ca–P minerals and bacterial cellulose nanofibers during early biomineralization process

Y. Wan, Honglin Luo, Guang-yao Xiong, 2010 .

Incorporating graphene oxide into biomimetic nano-microfibrous cellulose scaffolds for enhanced breast cancer cell behavior

Y. Wan, Quanchao Zhang, Honglin Luo, 2020, Cellulose.

Exploring excellent dispersion of graphene nanosheets in three-dimensional bacterial cellulose for ultra-strong nanocomposite hydrogels

Xinhua Xu, Zhiwei Yang, Xinhua Xu, 2018, Composites Part A: Applied Science and Manufacturing.

Ti3C2Tx MXene-incorporated macroporous bacterial cellulose scaffolds with physical and chemical crosslinking for enhanced mechanical and biological performance

Y. Wan, T. Cui, Zhiwei Yang, 2023, Cellulose.

Effects of Sodium Hypophosphite on the Behaviors of Electrodeposited NiWP Alloy Coatings

Meiqi Yu, Honglin Luo, K. Matsugi, 2017, Journal of Materials Engineering and Performance.

Constructing 3D scaffold with 40-nm-diameter hollow mesoporous bioactive glass nanofibers

Yong Zhu, Y. Wan, Zhiwei Yang, 2019, Materials Letters.

A doxorubicin and siRNA coloaded nanolamellar hydroxyapatite/PLGA electrospun scaffold as a safe antitumor drug delivery system

Teng Cui, Y. Wan, Quanchao Zhang, 2023, Applied Materials Today.

Carbon fiber-reinforced gelatin composites. I. Preparation and mechanical properties

K. Yao, Honglin Luo, G. Cheng, 2000 .

Simvastatin-loaded nanotubular mesoporous bioactive glass scaffolds for bone tissue engineering

Y. Wan, Zhiwei Yang, Fanglian Yao, 2019, Microporous and Mesoporous Materials.

An Integrated Micro-nano-fibrous Bilayered Small-Diameter Vascular Graft Simultaneously Supporting Endothelial and Smooth Muscle Cells

Y. Wan, Quanchao Zhang, Zhiwei Yang, 2023, Fibers and Polymers.

Constructing Hierarchical Porous Bacterial Cellulose Outer Layer for Enhanced SMCs Infiltration in a Double-Layered Vascular Graft

Y. Wan, Quanchao Zhang, Honglin Luo, 2023, Fibers And Polymers.

Double-layered bacterial cellulose mesh for hernia repair

Y. Wan, T. Cui, Quanchao Zhang, 2021 .

Laser Patterning of Bacterial Cellulose Hydrogel and its Modification With Gelatin and Hydroxyapatite for Bone Tissue Engineering

Huang Yuan, Honglin Luo, K. Dai, 2013 .

Embedding carbon nanotube to the surfaces of poly(ε-caprolactone) film for multi-responsive actuations

Y. Wan, Quanchao Zhang, Honglin Luo, 2021 .

A novel three-dimensional graphene/bacterial cellulose nanocomposite prepared by in situ biosynthesis

Y. Wan, Zhiwei Yang, Honglin Luo, 2014 .