Guang-yao Xiong

发表

In situ phosphorus K-edge X-ray absorption spectroscopy studies of calcium–phosphate formation and transformation on the surface of bacterial cellulose nanofibers

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Cellulose.

A general strategy of decorating 3D carbon nanofiber aerogels derived from bacterial cellulose with nano-Fe3O4 for high-performance flexible and binder-free lithium-ion battery anodes

Guangyao Xiong, Zhiwei Yang, Y. Wan, 2015 .

One-step in situ biosynthesis of graphene oxide-bacterial cellulose nanocomposite hydrogels.

Y. Wan, Zhiwei Yang, Honglin Luo, 2014, Macromolecular rapid communications.

Effect of Sisal Fibre Hybridisation on Static and Dynamic Mechanical Properties of Corn/Sisal/Polylactide Composites

Y. Wan, Honglin Luo, Guang-yao Xiong, 2017 .

Morphology and cell responses of three-dimensional porous silica nanofibrous scaffold prepared by sacrificial template method

Yong Zhu, Y. Wan, Fanglian Yao, 2017 .

Effects of alkali and alkali/silane treatments of corn fibers on mechanical and thermal properties of its composites with polylactic acid

Y. Wan, Honglin Luo, Guang-yao Xiong, 2016 .

Mechanical and thermo-mechanical behaviors of sizing-treated corn fiber/polylactide composites

Y. Wan, Fanglian Yao, Honglin Luo, 2014 .

Controlled template synthesis of lamellar hydroxyapatite nanoplates as a potential carrier for gene delivery

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015 .

Synthesis of a three-dimensional network-structured scaffold built of silica nanotubes for potential bone tissue engineering applications

Ping Liu, Y. Wan, Zhiwei Yang, 2015 .

Layered nanohydroxyapatite as a novel nanocarrier for controlled delivery of 5-fluorouracil.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2016, International journal of pharmaceutics.

Facile synthesis of ZnFe2O4/reduced graphene oxide nanohybrids for enhanced microwave absorption properties

Y. Wan, Zhiwei Yang, Honglin Luo, 2015 .

Engineering carbon fibers with dual coatings of FeCo and CuO towards enhanced microwave absorption properties

Y. Wan, T. Cui, Honglin Luo, 2016 .

Microwave absorption properties of FeCo-coated carbon fibers with varying morphologies

Y. Wan, Honglin Luo, Guang-yao Xiong, 2016 .

Facile preparation and extraordinary microwave absorption properties of carbon fibers coated with nanostructured crystalline SnO2

Y. Wan, Zhiwei Yang, Honglin Luo, 2014 .

Preparation, structural characterization, and in vitro cell studies of three-dimensional SiO2-CaO binary glass scaffolds built ofultra-small nanofibers.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2017, Materials science & engineering. C, Materials for biological applications.

Evolution of morphology of bacterial cellulose scaffolds during early culture.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Carbohydrate polymers.

Air DBD plasma treatment on three-dimensional braided carbon fiber-reinforced PEEK composites for enhancement of in vitro bioactivity

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014 .

The inhibition of lamellar hydroxyapatite and lamellar magnetic hydroxyapatite on the migration and adhesion of breast cancer cells

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Journal of Materials Science: Materials in Medicine.

Wetting Behavior and Tribological Properties of Polymer Brushes on Laser-Textured Surface

Guang-yao Xiong, M. Shen, Zhaoyuan Zhang, 2019, Polymers.

Self-assembled magnetic lamellar hydroxyapatite as an efficient nano-vector for gene delivery

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015 .

Synthesis of ZnO by Chemical Bath Deposition in the Presence of Bacterial Cellulose

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Acta Metallurgica Sinica (English Letters).

Sacrificial template method for the synthesis of three-dimensional nanofibrous 58S bioglass scaffold and its in vitro bioactivity and cell responses

Y. Wan, Zhiwei Yang, Honglin Luo, 2017, Journal of biomaterials applications.

Constructing a highly bioactive 3D nanofibrous bioglass scaffold via bacterial cellulose-templated sol-gel approach

Yong Zhu, Y. Wan, Honglin Luo, 2016 .

Immobilization of lecithin on bacterial cellulose nanofibers for improved biological functions

Y. Wan, Fanglian Yao, Honglin Luo, 2015 .

Preparation and performance of long carbon fiber reinforced polyamide 6 composites injection-molded from core/shell structured pellets

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014 .

Preparation of three-dimensional braided carbon fiber-reinforced PEEK composites for potential load-bearing bone fixations. Part I. Mechanical properties and cytocompatibility.

Y. Wan, Zhiwei Yang, Honglin Luo, 2014, Journal of the mechanical behavior of biomedical materials.

Hydrazine hydrate-induced hydrothermal synthesis of MnFe2O4 nanoparticles dispersed on graphene as high-performance anode material for lithium ion batteries

Y. Wan, Zhiwei Yang, Honglin Luo, 2017 .

Preparation of oriented bacterial cellulose nanofibers by flowing medium-assisted biosynthesis and influence of flowing velocity

Y. Wan, Zhiwei Yang, Honglin Luo, 2017 .

Characterisation of Hydroxyapatite/Bacterial Cellulose Nanocomposites

Y. Wan, Guang-yao Xiong, Yulin Wang, 2009 .

Scalable synthesis of three-dimensional interconnected mesoporous TiO2 nanotubes with ultra-large surface area

Ping Liu, Y. Wan, Zhiwei Yang, 2015 .

Preparation and properties of a novel porous poly(lactic acid) composite reinforced with bacterial cellulose nanowhiskers

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Fibers and Polymers.

Modification of medical metals by ion implantation of copper

Y. Wan, Guang-yao Xiong, Hui Liang, 2007 .

Mechanical properties and cytotoxicity of nanoplate-like hydroxyapatite/polylactide nanocomposites prepared by intercalation technique.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015, Journal of the mechanical behavior of biomedical materials.

Characterization of biomedical hydroxyapatite/magnesium composites prepared by powder metallurgy assisted with microwave sintering

Wei Li, Chunzhi Li, Guangyao Xiong, 2016 .

Surface controlled calcium phosphate formation on three-dimensional bacterial cellulose-based nanofibers.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015, Materials science & engineering. C, Materials for biological applications.

Tribological behaviour of acrylonitrile-butadiene rubber under thermal oxidation ageing

Guang-yao Xiong, M. Shen, Jian Zhang, 2020 .

Preparation and characterization of a new biomedical magnesium–calcium alloy

Y. Wan, Honglin Luo, Guang-yao Xiong, 2008 .

Synthesis of aluminum nitride nanoparticles by a facile urea glass route and influence of urea/metal molar ratio

Y. Wan, Honglin Luo, Guang-yao Xiong, 2013 .

Mechanical and biological properties of bioglass/magnesium composites prepared via microwave sintering route

Yong Zhu, Wei Li, Chunzhi Li, 2016 .

Comparison of coating properties obtained by MAO on magnesium alloys in silicate and phytic acid electrolytes

Guang-yao Xiong, R. F. Zhang, C. Y. Hu, 2010 .

High damping capacities of Mg-Cu based alloys

Guang-yao Xiong, Jincheng Wang, Gencang Yang, 2010 .

Influence of zinc ion implantation on surface nanomechanical performance and corrosion resistance of biomedical magnesium–calcium alloys

Y. Huang, Y. Wan, Honglin Luo, 2008 .

ZnO nanostructures grown on carbon fibers: Morphology control and microwave absorption properties

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014 .

Characterization of TEMPO-oxidized bacterial cellulose scaffolds for tissue engineering applications

Y. Wan, Fanglian Yao, Honglin Luo, 2013 .

One-step exfoliation and surface modification of lamellar hydroxyapatite by intercalation of glucosamine

Y. Wan, Honglin Luo, Guang-yao Xiong, 2016 .

Preparation and properties of polyamide 6 thermal conductive composites reinforced with fibers

Y. Wan, Honglin Luo, Guang-yao Xiong, 2013 .

Study on Fe–Al–Si in situ composite coating fabricated by laser cladding

Guang-yao Xiong, Longzhi Zhao, Mingjuan Zhao, 2012 .

Equilibrium Melting Temperature of Polymorphic Poly(l-lactide) and Its Supercooling Dependence on Growth Kinetics

Y. Wan, Guang-yao Xiong, Meiling Zhong, 2017, Polymers.

Abrasive wear behavior of PTFE for seal applications under abrasive-atmosphere sliding condition

Guang-yao Xiong, Longzhi Zhao, M. Shen, 2019, Friction.

Facile and scalable production of three-dimensional spherical carbonized bacterial cellulose/graphene nanocomposites with a honeycomb-like surface pattern as potential superior absorbents

Yong Zhu, Y. Wan, Honglin Luo, 2015 .

Bacterial cellulose/graphene oxide nanocomposite as a novel drug delivery system

Yong Zhu, Y. Wan, Honglin Luo, 2017 .

Effect of Particle Size on Tribological Properties of Rubber/Steel Seal Pairs Under Contaminated Water Lubrication Conditions

Guang-yao Xiong, Longzhi Zhao, M. Shen, 2020, Tribology Letters.

Porous nanoplate-like hydroxyapatite–sodium alginate nanocomposite scaffolds for potential bone tissue engineering

Y. Wan, Honglin Luo, Guang-yao Xiong, 2017 .

An ultralight and highly compressible anode for Li-ion batteries constructed from nitrogen-doped carbon enwrapped Fe3O4 nanoparticles confined in a porous 3D nitrogen-doped graphene network

Yong Zhu, Y. Wan, Zhiwei Yang, 2017 .

Synthesis and characterization of three-dimensional porous graphene oxide/sodium alginate scaffolds with enhanced mechanical properties

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014 .

Effect of Gas Nitriding on Interface Adhesion and Surface Damage of CL60 Railway Wheels under Rolling Contact Conditions

Guang-yao Xiong, M. Shen, K. Rong, 2020, Metals.

Effect of particle concentration on the tribological properties of NBR sealing pairs under contaminated water lubrication conditions

Guang-yao Xiong, M. Shen, De-hui Ji, 2020 .

Effect of contact stress on the tribology behaviors of PTFE/316L seal pairs under various abrasive-contained conditions

Guang-yao Xiong, M. Shen, Xiuzhou Lin, 2020 .

Novel porous graphene oxide and hydroxyapatite nanosheets-reinforced sodium alginate hybrid nanocomposites for medical applications

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015 .

Time-dependent effect on wetting and tribological properties of plasma-modified acrylonitrile–butadiene rubber (NBR) surface

Guang-yao Xiong, M. Shen, Zhaoyuan Zhang, 2019, International Journal of Modern Physics B.

Enhanced biological behavior of bacterial cellulose scaffold by creation of macropores and surface immobilization of collagen

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015, Macromolecular Research.

A Novel in Vitro Three-Dimensional Macroporous Scaffolds from Bacterial Cellulose for Culture of Breast Cancer Cells

Y. Wan, Honglin Luo, Guang-yao Xiong, 2013 .

Directional fluid induced self-assembly of oriented bacterial cellulose nanofibers for potential biomimetic tissue engineering scaffolds

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015 .

Constructing three-dimensional nanofibrous bioglass/gelatin nanocomposite scaffold for enhanced mechanical and biological performance

Y. Wan, Zhiwei Yang, Fanglian Yao, 2017 .

Constructing superior carbon-nanofiber-based composite microwave absorbers by engineering dispersion and loading of Fe3O4 nanoparticles on three-dimensional carbon nanofibers derived from bacterial cellulose

Y. Wan, Zhiwei Yang, Honglin Luo, 2017 .

Three-dimensional porous nanocomposite of highly dispersed Fe3 O4 nanoparticles on carbon nanofibers for high-performance microwave absorbents

Y. Wan, Honglin Luo, Guang-yao Xiong, 2015 .

Anchoring Fe 3 O 4 nanoparticles on three-dimensional carbon nanofibers toward flexible high-performance anodes for lithium-ion batteries

Y. Wan, Zhiwei Yang, Honglin Luo, 2015 .

Novel ultra-thin ZnO nanosheets on carbon fiber: Preparation, characterization, and microwave absorption properties

Y. Wan, Zhiwei Yang, Honglin Luo, 2014 .

Nitrogen-doped graphene enwrapped silicon nanoparticles with nitrogen-doped carbon shell: a novel nanocomposite for lithium-ion batteries

Y. Wan, Zhiwei Yang, Honglin Luo, 2016 .

Magnetic lamellar nanohydroxyapatite as a novel nanocarrier for controlled delivery of 5-fluorouracil

Yong Zhu, Y. Wan, T. Cui, 2017 .

Creation of macropores in three-dimensional bacterial cellulose scaffold for potential cancer cell culture.

Y. Wan, Honglin Luo, Guang-yao Xiong, 2014, Carbohydrate polymers.

Constructing a novel three-dimensional scaffold with mesoporous TiO2 nanotubes for potential bone tissue engineering.

Ping Liu, Y. Wan, Zhiwei Yang, 2015, Journal of materials chemistry. B.

Evolution of contact surface characteristics and tribological properties of a copper-based sintered material during high-energy braking

Guang-yao Xiong, Pingping Yao, Yelong Xiao, 2021, Wear.

Preparation and characterization of a novel COL/BC composite for potential tissue engineering scaffolds

Y. Wan, Honglin Luo, Guang-yao Xiong, 2008 .

Abrasive wear behavior of PTFE for seal applications under abrasive-atmosphere sliding condition

Guang-yao Xiong, Longzhi Zhao, M. Shen, 2019, Friction.

Effect of Si content on structure and electrochemical performance of ternary nanohybrids integrating Si nanoparticles, N-doped carbon shell, and nitrogen-doped graphene

Yong Zhu, Y. Wan, Zhiwei Yang, 2017, RSC Advances.

Dynamic interaction between the growing Ca–P minerals and bacterial cellulose nanofibers during early biomineralization process

Y. Wan, Honglin Luo, Guang-yao Xiong, 2010 .

Research of Microstructure and Properties of the 4Cr14Ni14W2Mo Steel with QPQ Salt-Bath Nitriding

Guang-yao Xiong, B. He, R. Zou, 2008 .

A novel three-dimensional graphene/bacterial cellulose nanocomposite prepared by in situ biosynthesis

Y. Wan, Zhiwei Yang, Honglin Luo, 2014 .