C. Shi

发表

SYNTHESIS AND CHARACTERIZATION OF AG NANOPARTICLES ASSEMBLED IN ORDERED ARRAY PORES OF POROUS ANODIC ALUMINA BY CHEMICAL DEPOSITION

Xi‐Wen Du, Guoqiang Wang, C. Shi, 2007 .

A large ultrathin anatase TiO2 nanosheet/reduced graphene oxide composite with enhanced lithium storage capability

C. Shi, N. Zhao, C. He, 2014 .

Effect of amorphous FePO4 coating on structure and electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 as cathode material for Li-ion batteries

Jiajun Li, Naiqin Zhao, Chunnian He, 2013 .

Assembly Multifunctional Three-Dimensional Carbon Networks by Controlling Intermolecular Forces.

C. Shi, N. Zhao, Shan Zhu, 2018, ACS applied materials & interfaces.

In-situ space-confined catalysis for fabricating 3D mesoporous graphene and their capacitive properties

C. Shi, N. Zhao, Shan Zhu, 2018 .

Soluble salt self-assembly-assisted synthesis of three-dimensional hierarchical porous carbon networks for supercapacitors

C. Shi, N. Zhao, Shan Zhu, 2015 .

A novel synthesis of CNTs/TiO2 nanocomposites with enhanced performance as photoanode of solar cell

C. Shi, N. Zhao, C. He, 2013 .

Synthesis of SiO2/3D porous carbon composite as anode material with enhanced lithium storage performance

C. Shi, N. Zhao, C. He, 2016 .

A nanosized SnSb alloy confined in N-doped 3D porous carbon coupled with ether-based electrolytes toward high-performance potassium-ion batteries

C. Shi, N. Zhao, Yan-Guo Liu, 2019, Journal of Materials Chemistry A.

Thermal decomposition-reduced layer-by-layer nitrogen-doped graphene/MoS2/nitrogen-doped graphene heterostructure for promising lithium-ion batteries

C. Shi, N. Zhao, C. He, 2017 .

Artificial neural network enabled capacitance prediction for carbon-based supercapacitors

C. Shi, N. Zhao, Shan Zhu, 2018, Materials Letters.

Fabrication of Nanocarbon Composites Using In Situ Chemical Vapor Deposition and Their Applications

C. Shi, N. Zhao, C. He, 2015, Advanced materials.

Low temperature fabrication of hollow carbon nanospheres over Ni/Al2O3 by the catalytic method

C. Shi, N. Zhao, C. He, 2008 .

Direct synthesis of fullerene-intercalated porous carbon nanofibers by chemical vapor deposition

A. Hirata, C. Shi, N. Zhao, 2012 .

Effect of Interfacial Lithium Insertion on the Stability and Electronic Structure of Graphene/LiFePO4

C. Shi, N. Zhao, C. He, 2017 .

Effectively reinforced load transfer and fracture elongation by forming Al4C3 for in-situ synthesizing carbon nanotube reinforced Al matrix composites

C. Shi, N. Zhao, C. He, 2018 .

Effect of carbon nanotube (CNT) content on the properties of in-situ synthesis CNT reinforced Al composites

Tianchun Zou, C. Shi, N. Zhao, 2016 .

Synergistic effect of CNTs reinforcement and precipitation hardening in in-situ CNTs/Al–Cu composites

C. Shi, N. Zhao, C. He, 2015 .

Fabrication of carbon nanotube reinforced Al composites with well-balanced strength and ductility

K. Kondoh, C. Shi, N. Zhao, 2013 .

Synthesis of uniformly dispersed carbon nanotube reinforcement in Al powder for preparing reinforced Al composites

C. Shi, N. Zhao, C. He, 2011 .

SYNTHESIS OF CARBON NANOTUBE REINFORCEMENT IN ALUMINUM POWDER BY IN SITU CHEMICAL VAPOR DEPOSITION

C. Shi, N. Zhao, E. Liu, 2022 .

Microwave absorbing properties of the Archimedean plane spiral antenna array/epoxy resin composites

Tianchun Zou, C. Shi, N. Zhao, 2007 .

Rational design of Co9S8/CoO heterostructures with well-defined interfaces for lithium sulfur batteries: A study of synergistic adsorption-electrocatalysis function

C. Shi, N. Zhao, C. He, 2019, Nano Energy.

Balancing Strength and Ductility in Al Matrix Composites Reinforced by Few-Layered MoS2 through In-Situ Formation of Interfacial Al12Mo

C. Shi, N. Zhao, C. He, 2021, Materials.

Fabrication of carbon nanomaterials by chemical vapor deposition

C. Shi, N. Zhao, S. Song, 2009 .

Effect of annealing on the structure of carbon onions and the annealed carbon coated Ni nanoparticles fabricated by chemical vapor deposition

Xi‐Wen Du, C. Shi, N. Zhao, 2009 .

Synthesis of carbon nanotubes and carbon onions by CVD using a Ni/Y catalyst supported on copper

Xi‐Wen Du, C. Shi, N. Zhao, 2008 .

Carbon nanotubes and onions from methane decomposition using Ni/Al catalysts

Xi‐Wen Du, C. Shi, N. Zhao, 2006 .

A practical method for the production of hollow carbon onion particles

Xi‐Wen Du, C. Shi, N. Zhao, 2006 .

Three-dimensionally hierarchical Co3O4/Carbon composites with high pseudocapacitance contribution for enhancing lithium storage

C. Shi, N. Zhao, Shan Zhu, 2018, Electrochimica Acta.

Hierarchical porous carbon with graphitic structure synthesized by a water soluble template method

Xi‐Wen Du, C. Shi, N. Zhao, 2012 .

Preparation of 3YSZ/Cu composite by in-situ chemical route

Xi‐Wen Du, C. Shi, N. Zhao, 2007 .

Fabrication of in-situ grown graphene reinforced Cu matrix composites

X. Zhang, C. Shi, N. Zhao, 2016, Scientific Reports.

Synthesis of hollow carbon nano-onions and their use for electrochemical hydrogen storage

Robert H. Hauge, Chenguang Zhang, Jiajun Li, 2012 .

Self-anchored catalysts for substrate-free synthesis of metal-encapsulated carbon nano-onions and study of their magnetic properties

C. Shi, N. Zhao, C. He, 2016, Nano Research.

Effect of Ni, Fe and Fe-Ni alloy catalysts on the synthesis of metal contained carbon nano-onions and studies of their electrochemical hydrogen storage properties

C. Shi, N. Zhao, C. He, 2014 .

The efficient synthesis of carbon nano-onions using chemical vapor deposition on an unsupported Ni–Fe alloy catalyst

W. Feng, C. Shi, N. Zhao, 2011 .

Free‐Standing 3D Nanoporous Duct‐Like and Hierarchical Nanoporous Graphene Films for Micron‐Level Flexible Solid‐State Asymmetric Supercapacitors

C. Shi, N. Zhao, C. He, 2016 .

In situ synthesis of carbon onion/nanotube reinforcements in copper powders

Dajun Chen, C. Shi, N. Zhao, 2009 .

Electrochemical hydrogen storage of expanded graphite decorated with TiO2 nanoparticles

C. Shi, N. Zhao, C. He, 2012 .

Capacitance controlled, hierarchical porous 3D ultra-thin carbon networks reinforced prussian blue for high performance Na-ion battery cathode

C. Shi, N. Zhao, Jian Qin, 2019, Nano Energy.

In-situ synthesis of CNTs@Al2O3 wrapped structure in aluminum matrix composites with balanced strength and toughness

C. Shi, N. Zhao, C. He, 2020 .

In-situ synthesis of MgAlB4 whiskers as a promising reinforcement for aluminum matrix composites

C. Shi, N. Zhao, C. He, 2019, Materials Science and Engineering: A.

Carbon-coated Ni3Sn2 nanoparticles embedded in porous carbon nanosheets as a lithium ion battery anode with outstanding cycling stability

X. Zhang, C. Shi, N. Zhao, 2014 .

Metal–organic frameworks-derived honeycomb-like Co3O4/three-dimensional graphene networks/Ni foam hybrid as a binder-free electrode for supercapacitors

C. Shi, N. Zhao, Shan Zhu, 2017 .

Effect of Hydrogen Molecule Dissociation on Hydrogen Storage Capacity of Graphene with Metal Atom Decorated

C. Shi, N. Zhao, C. He, 2014 .

A novel method for making open cell aluminum foams by powder sintering process

Bin Jiang, Jiajun Li, Naiqin Zhao, 2005 .

A novel method for synthesizing ultralight silver foams by the silver mirror reaction

B. Jiang, C. Shi, N. Zhao, 2016 .

A novel approach to obtain in-situ growth carbon nanotube reinforced aluminum foams with enhanced properties

Tianchun Zou, C. Shi, N. Zhao, 2015 .

In situ synthesis of ultrathin 2-D TiO2 with high energy facets on graphene oxide for enhancing photocatalytic activity

Jiajun Li, Sha Junwei, Naiqin Zhao, 2014 .

Anomalous interfacial lithium storage in graphene/TiO2 for lithium ion batteries.

C. Shi, N. Zhao, C. He, 2014, ACS applied materials & interfaces.

In-situ space-confined synthesis of well-dispersed three-dimensional graphene/carbon nanotube hybrid reinforced copper nanocomposites with balanced strength and ductility

X. Zhang, C. Shi, N. Zhao, 2017 .

Fabrication of Er/Tm/Yb/Y2O3 upconversion luminescence enhanced 3C-SiC composites as highly UV–Vis–NIR light responsive photocatalysts

C. Shi, N. Zhao, C. He, 2018 .

TEM studies of the initial stage growth and morphologies of bamboo-shaped carbon nanotubes synthesized by CVD

Xi‐Wen Du, C. Shi, N. Zhao, 2007 .

Preparation of Three-Dimensional Carbon Network Reinforced Epoxy Composites and Their Thermal Conductivity

C. Shi, N. Zhao, F. He, 2020 .

Constructing N-Doped porous carbon confined FeSb alloy nanocomposite with Fe-N-C coordination as a universal anode for advanced Na/K-ion batteries

C. Shi, N. Zhao, C. He, 2020 .

Graphene networks anchored with sn@graphene as lithium ion battery anode.

C. Shi, N. Zhao, C. He, 2014, ACS nano.

One-step synthesis of SnCo nanoconfined in hierarchical carbon nanostructures for lithium ion battery anode.

X. Zhang, C. Shi, N. Zhao, 2017, Nanoscale.

Three-dimensional porous carbon nanosheet networks anchored with Cu6Sn5@carbon as a high-performance anode material for lithium ion batteries

C. Shi, N. Zhao, Yan-Guo Liu, 2016 .

Bi-functional modular graphene network with high rate and cycling performance

C. Shi, N. Zhao, C. He, 2021 .

Doping and controllable pore size enhanced electrochemical performance of free-standing 3D graphene films

C. Shi, N. Zhao, C. He, 2018 .

Comprehensive performance regulation of Cu matrix composites with graphene nanoplatelets in situ encapsulated Al2O3 nanoparticles as reinforcement

C. Shi, N. Zhao, C. He, 2021, Carbon.

Fabrication and properties of carbon nanotubes reinforced Fe/hydroxyapatite composites by in situ chemical vapor deposition

Xi‐Wen Du, C. Shi, N. Zhao, 2008 .

Single-Atom Cobalt Supported on Nitrogen-Doped Three-Dimensional Carbon Facilitating Polysulfide Conversion in Lithium-Sulfur Batteries.

C. Shi, N. Zhao, Junwei Sha, 2022, ACS applied materials & interfaces.

Amorphous carbon nanotubes fabricated by low-temperature chemical vapor deposition

Xi‐Wen Du, C. Shi, N. Zhao, 2006 .

Carbon onion growth enhanced by nitrogen incorporation

Xi‐Wen Du, C. Shi, N. Zhao, 2006 .

Nanometre Ni and core/shell Ni/Au nanoparticles with controllable dimensions synthesized in reverse microemulsion

J. Sheng, C. Shi, N. Zhao, 2009 .

Properties of Core−Shell Ni−Au Nanoparticles Synthesized through a Redox-Transmetalation Method in Reverse Microemulsion

C. Shi, N. Zhao, Jiajun Li, 2007 .

Monodisperse multicore-shell SnSb@SnOx/SbOx@C nanoparticles space-confined in 3D porous carbon networks as high-performance anode for Li-ion and Na-ion batteries

C. Shi, N. Zhao, C. He, 2019, Chemical Engineering Journal.

Performance improvement of dye-sensitized solar cells using room-temperature-synthesized hierarchical TiO2 honeycomb nanostructures.

C. Shi, N. Zhao, C. He, 2013, ACS applied materials & interfaces.

Octopus-Inspired Design of Apical NiS2 Nanoparticles Supported on Hierarchical Carbon Composites as an Efficient Host for Lithium Sulfur Batteries with High Sulfur Loading.

Rui Zhang, C. Shi, N. Zhao, 2020, ACS applied materials & interfaces.

Synthesis of binary and triple carbon nanotubes over Ni/Cu/Al2O3 catalyst by chemical vapor deposition

Xi‐Wen Du, C. Shi, N. Zhao, 2007 .

TiO2 cellular-protected nanowire array fabricated super-rapidly by the precipitation of colloids in the nanopores

C. Shi, N. Zhao, C. He, 2012 .

Reinforcing copper matrix composites through molecular-level mixing of functionalized nanodiamond by co-deposition route

Xi‐Wen Du, C. Shi, N. Zhao, 2008 .

A Chemical-Adsorption Strategy to Enhance the Reaction Kinetics of Lithium-Rich Layered Cathodes via Double-Shell Surface Modification.

C. Shi, N. Zhao, C. He, 2016, ACS applied materials & interfaces.

Surface double phase network modified lithium rich layered oxides with improved rate capability for Li-ion batteries.

C. Shi, N. Zhao, C. He, 2015, ACS applied materials & interfaces.

Fabrication and growth mechanism of Ni-filled carbon nanotubes by the catalytic method

C. Shi, N. Zhao, C. He, 2008 .

First-principles study of the B- or N-doping effects on chemical bonding characteristics between magnesium and single-walled carbon nanotubes

C. Shi, N. Zhao, Jiajun Li, 2009 .

Ball-in-cage nanocomposites of metal-organic frameworks and three-dimensional carbon networks: synthesis and capacitive performance.

C. Shi, N. Zhao, Shan Zhu, 2017, Nanoscale.

Ultrafine SnO2 nanoparticles encapsulated in 3D porous carbon as a high-performance anode material for potassium-ion batteries

C. Shi, N. Zhao, Yan-Guo Liu, 2019, Journal of Power Sources.

Bio-inspired three-dimensional carbon network with enhanced mass-transfer ability for supercapacitors

C. Shi, N. Zhao, Shan Zhu, 2019, Carbon.

A Top‐Down Strategy toward SnSb In‐Plane Nanoconfined 3D N‐Doped Porous Graphene Composite Microspheres for High Performance Na‐Ion Battery Anode

Tianshuai Wang, C. Shi, N. Zhao, 2018, Advanced materials.

Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network.

X. Zhang, C. Shi, N. Zhao, 2017, Nanoscale.

In situ synthesis of ceria decorated carbon nanotubes by chemical vapor deposition

Xi‐Wen Du, C. Shi, N. Zhao, 2009 .

Preparation of reduced graphene oxide/Fe3O4 nanocomposite and its microwave electromagnetic properties

C. Shi, N. Zhao, C. He, 2013 .

Adsorption of hydrogen atoms on graphene with TiO2 decoration

C. Shi, N. Zhao, C. He, 2013 .

Ultrafine Fe3N nanocrystals coupled with N doped 3D porous carbon networks induced atomically dispersed Fe for superior sodium ion storage

C. Shi, N. Zhao, C. He, 2022, Carbon.

Effects of anodizing conditions on anodic alumina structure

Xi‐Wen Du, C. Shi, N. Zhao, 2007 .

Induced construction of large-area amorphous Li2O2 film via elemental co-doping and spatial confinement to achieve high-performance Li-O2 batteries

C. Shi, N. Zhao, Shan Zhu, 2021, Energy Storage Materials.

Phase Component-controllable Synthesis of Layered-Spinel Composite Materials as High-Performance Cathode for Lithium-ion Battery

Hui Cao, C. Shi, N. Zhao, 2016 .

NaCl-pinned antimony nanoparticles combined with ion-shuttle-induced graphitized 3D carbon to boost sodium storage

C. Sow, C. Shi, N. Zhao, 2022, Cell Reports Physical Science.

Metal-oxygen bonding nanoarchitectonics for regulation of oxygen evolution reaction performance in FeNi-codoped CoOOH

C. Shi, N. Zhao, C. He, 2022, International Journal of Hydrogen Energy.

Interface intrinsic strengthening mechanism on the tensile properties of Al2O3/Al composites

C. Shi, N. Zhao, C. He, 2019, Computational Materials Science.

Understanding the Electrochemical Properties of Li-Rich Cathode Materials from First-Principles Calculations

C. Shi, N. Zhao, C. He, 2015 .

Characterization of bamboo-shaped CNTs prepared using deposition-precipitation catalyst

Xi‐Wen Du, C. Shi, N. Zhao, 2008 .

Lithiophilic seeds and rigid arrays synergistic induced dendrite-free and stable Li anode towards long-life lithium-oxygen batteries

Rui Zhang, C. Shi, N. Zhao, 2022, Journal of Energy Chemistry.

Damping characteristics of Al matrix composite foams reinforced by in-situ grown carbon nanotubes

C. Shi, N. Zhao, C. He, 2017 .

Fabrication of Sn-core/CNT-shell nanocable anchored interconnected carbon networks as anode material for lithium ion batteries

C. Shi, N. Zhao, C. He, 2018 .

Scalable synthesis of high-quality transition metal dichalcogenide nanosheets and their application as sodium-ion battery anodes

C. Shi, N. Zhao, C. He, 2016 .

MnO nanoparticles@continuous carbon nanosheets for high performance lithium ion battery anodes

Rui Zhang, C. Shi, Shan Zhu, 2017 .

Synergistic reinforcement effect of Fe and in-situ synthesized MgAlB4 whiskers in Al matrix composites

Shijian Zheng, C. Shi, N. Zhao, 2022, Composites Part B: Engineering.

Unraveling the mechanism of ligands regulating electronic structure of MN4 sites with optimized ORR catalytic performance

C. Shi, N. Zhao, C. He, 2022, Applied Surface Science.

High strain rate dynamic compressive properties and deformation behavior of Al matrix composite foams reinforced by in-situ grown carbon nanotubes

C. Shi, N. Zhao, C. He, 2017, Materials Science and Engineering: A.

Microstructural evolution and mechanical behavior of in situ synthesized MgAl2O4 whiskers reinforced 6061 Al alloy composite after hot extrusion and annealing

C. Shi, N. Zhao, C. He, 2018, Rare Metals.

Recrystallization behavior of in-situ synthesized MgAl2O4 whiskers reinforced 6061 aluminum alloy composites

C. Shi, N. Zhao, Geng Hao, 2017 .

Facile synthesis and electrochemical properties of continuous porous spheres assembled from defect-rich, interlayer-expanded, and few-layered MoS2/C nanosheets for reversible lithium storage

C. Shi, N. Zhao, C. He, 2018 .

CeO x-Decorated NiFe-Layered Double Hydroxide for Efficient Alkaline Hydrogen Evolution by Oxygen Vacancy Engineering.

C. Shi, N. Zhao, Ping Zhang, 2018, ACS applied materials & interfaces.

Layered Aggregates of Gold Nanoparticles: Solution and Surface-Assembled Structures

C. Shi, Linlin Wu, Liangfei Tian, 2007 .

TEM investigation on the initial stage growth of carbon onions synthesized by CVD

Xi‐Wen Du, C. Shi, N. Zhao, 2008 .

Phosphorus doping of 3D Structural MoS2 to Promote Catalytic Activity for Lithium-Sulfur Batteries

C. Shi, N. Zhao, Junwei Sha, 2021, Chemical Engineering Journal.

Salt-assisted synthesis of 3D open porous g-C3N4 decorated with cyano groups for photocatalytic hydrogen evolution.

C. Shi, N. Zhao, C. He, 2018, Nanoscale.

ReS2 nanosheets anchored on rGO as an efficient polysulfides immobilizer and electrocatalyst for Li-S batteries

C. Shi, N. Zhao, E. Liu, 2020 .

Simultaneously optimizing pore morphology and enhancing mechanical properties of Al-Si alloy composite foams by graphene nanosheets

C. Shi, N. Zhao, C. He, 2021, Journal of Materials Science & Technology.

Three-dimensional core-shell Fe 2 O 3 @ carbon/carbon cloth as binder-free anode for the high-performance lithium-ion batteries

C. Shi, N. Zhao, C. He, 2016 .

A Solvent-Driven Organogel Shrinkage

C. Shi, Jin Zhu, 2007 .

Structural evolution and Raman study of nanocarbons from diamond nanoparticles

Zhi Qiao, C. Shi, N. Zhao, 2006 .

{010}-Oriented micro-flower-like hierarchical Bi2WO6 with high adsorptivity and visible-light-driven photoactivity: experimental studies and first-principles modeling

C. Shi, N. Zhao, C. He, 2015 .

Formation of the orientation relationship-dependent interfacial carbide in Al matrix composite affected by architectured carbon nanotube

Xiaofeng Chen, J. Tao, C. Shi, 2022, Acta Materialia.

Regulating microstructure of Al matrix composites with nanocarbon architecture design towards prominent strength-ductility combination

Xiaofeng Chen, J. Tao, C. Shi, 2022, Scripta Materialia.

An in-plane Co9S8@MoS2 heterostructure for the hydrogen evolution reaction in alkaline media.

Biao Zhang, C. Shi, N. Zhao, 2019, Nanoscale.

Thermogravimetric analysis and TEM characterization of the oxidation and defect sites of carbon nanotubes synthesized by CVD of methane

C. Shi, N. Zhao, C. He, 2008 .

In-Situ Synthesis of Undulated Ni Anchored To Graphene/Al with One- Step Method

C. Shi, N. Zhao, C. He, 2017 .

Hierarchical nickle-iron layered-double-hydroxide composite electrocatalyst for efficient oxygen evolution reaction

Huaijun Sun, Z. Cui, Shengli Zhu, 2021, Materials Today Nano.

The preparation and properties of novel structural damping composites reinforced by nitrile rubber coated 3‐D braided carbon fibers

F. Gao, C. Shi, N. Zhao, 2018, Polymer Composites.

Achieving prominent strengthening efficiency of graphene nanosheets in Al matrix composites by hybrid deformation

C. Shi, N. Zhao, C. He, 2021 .

Revealing the Strengthening and Toughening Mechanisms of Al-CuO Composite Fabricated Via In-Situ Solid-State Reaction

C. Shi, N. Zhao, C. He, 2020, Acta Materialia.

In situ fabrication of Ni(OH)2/Cu2O nanosheets on nanoporous NiCu alloy for high performance supercapacitor

P. Liu, C. Shi, N. Zhao, 2018, Electrochimica Acta.

Nanostructured hybrid layered-spinel cathode material synthesized by hydrothermal method for lithium-ion batteries.

C. Shi, N. Zhao, C. He, 2014, ACS applied materials & interfaces.

Nanotubular Ni-supported graphene @ hierarchical NiCo-LDH with ultrahigh volumetric capacitance for supercapacitors

C. Shi, N. Zhao, C. He, 2018, Applied Surface Science.

Fabrication of carbon-coated cobalt nanoparticles by the catalytic method

C. Shi, N. Zhao, C. He, 2008 .

The effect of catalyst evolution at various temperatures on carbon nanostructures formed by chemical vapor deposition

Xi‐Wen Du, C. Shi, N. Zhao, 2009, Journal of Materials Science.

Two Birds with One Stone: A NaCl-Assisted Strategy toward MoTe2 Nanosheets Nanoconfined in 3D Porous Carbon Network for Sodium-Ion Battery Anode

C. Shi, N. Zhao, C. He, 2022, Energy Storage Materials.

Exceptional mechanical properties of aluminum matrix composites with heterogeneous structure induced by in-situ graphene nanosheet-Cu hybrids

Xiaofeng Chen, C. Shi, N. Zhao, 2022, Composites Part B: Engineering.

Simultaneously enhanced mechanical properties and electrical property of Cu-2 wt% Ag alloy matrix composites with analogy-bicontinuous structures constructed via in-situ synthesized graphene nanoplatelets

C. Shi, N. Zhao, Xiang Zhang, 2022, Carbon.

In-situ synthesis of graphene decorated with nickel nanoparticles for fabricating reinforced 6061Al matrix composites

C. Shi, N. Zhao, C. He, 2017 .

Defect-induced dipole polarization engineering of electromagnetic wave absorbers: Insights and perspectives

C. Shi, Chenxu Wang, Kai Song, 2022, Composites Part B: Engineering.

Ultrahigh volumetric capacitance and cycle stability via structure design and synergistic action between CoMoO4 nanosheets and 3D porous Ni-Co film

P. Liu, C. Shi, N. Zhao, 2019, Applied Surface Science.

Microwave absorbing properties of activated carbon fibre polymer composites

Tianchun Zou, C. Shi, N. Zhao, 2011 .

Synthesis of three-dimensional carbon networks decorated with Fe3O4 nanoparticles as lightweight and broadband electromagnetic wave absorber

C. Shi, N. Zhao, C. He, 2019, Journal of Alloys and Compounds.

Revealing The Bifunction Mechanism of Lacoo3 as Electrocatalyst: Oxygen Vacancies Effect and Synergistic Reaction Process

C. Shi, N. Zhao, C. He, 2023, SSRN Electronic Journal.

Effect of Interface Structure on the Mechanical Properties of Graphene Nanosheets Reinforced Copper Matrix Composites.

C. Shi, N. Zhao, C. He, 2018, ACS applied materials & interfaces.

Regulation of the Interface Binding and Elastic Properties of SiC/Ti via Doping‐Induced Electronic Localization

C. Shi, N. Zhao, C. He, 2019, physica status solidi (b).

Microstructure evolution and tensile behavior of MgAlB4w/Al composites at high temperatures

J. Li, C. Shi, N. Zhao, 2021 .

Spatially uniform Li deposition realized by 3D continuous duct-like graphene host for high energy density Li metal anode

Rui Zhang, C. Shi, N. Zhao, 2020 .

High strength-ductility synergy of MgAlB4 whisker reinforced aluminum matrix composites achieved by in situ synthesis

J. Li, C. Shi, N. Zhao, 2021 .

Orientation relationships and interface structure in MgAl2O4 and MgAlB4 co-reinforced Al matrix composites.

C. Shi, N. Zhao, C. He, 2019, ACS applied materials & interfaces.

Comparison of electronic structures and mechanical properties of MgAlB4, AlB2 and MgB2 using first-principles calculations

C. Shi, N. Zhao, C. He, 2020 .

Regulation of the interface binding and mechanical properties of TiB/Ti via doping-induced chemical and structural effects

C. Shi, N. Zhao, C. He, 2020 .

Microstructure and properties of in situ generated MgAl2O4 spinel whisker reinforced aluminum matrix composites

Xi‐Wen Du, C. Shi, N. Zhao, 2013 .

Preparation and mechanical properties of in-situ synthesized nano-MgAl2O4 particles and MgxAl(1-x)B2 whiskers co-reinforced Al matrix composites

C. Shi, N. Zhao, C. He, 2018, Materials Science and Engineering: A.

In situ synthesis of a gamma-Al 2 O 3 whisker reinforced aluminium matrix composite by cold pressing and sintering

C. Shi, N. Zhao, C. He, 2018 .

In-situ synthesis of MgAl2O4 nanowhiskers reinforced 6061 aluminum alloy composites by reaction hot pressing

C. Shi, N. Zhao, C. He, 2014 .

Fabrication of aluminum matrix composites with enhanced mechanical properties reinforced by in situ generated MgAl2O4 whiskers

Xi‐Wen Du, C. Shi, N. Zhao, 2012 .

Evolution of microstructure and properties of Al–Zn–Mg–Cu–Sc–Zr alloy during aging treatment

C. Shi, N. Zhao, C. He, 2016 .

Effect of Sc/Zr ratio on the microstructure and mechanical properties of new type of Al–Zn–Mg–Sc–Zr alloys

C. Shi, N. Zhao, C. He, 2014 .

NiO nanotubes assembled in pores of porous anodic alumina and their optical absorption properties

Xi‐Wen Du, Guoqiang Wang, C. Shi, 2008 .

Enhanced mechanical properties and electrical conductivity of graphene nanoplatelets/Cu composites by in situ formation of Mo2C nanoparticles

C. Shi, N. Zhao, C. He, 2019, Materials Science and Engineering: A.

In situ synthesis of Ti2AlC–Al2O3/TiAl composite by vacuum sintering mechanically alloyed TiAl powder coated with CNTs

C. Shi, N. Zhao, C. He, 2013 .

Low-temperature synthesis of aluminum borate nanowhiskers on the surface of aluminum powder promoted by ball-milling pretreatment

Xi‐Wen Du, C. Shi, N. Zhao, 2011 .

Strongly coupled hollow-oxide/phosphide hybrid coated with nitrogen-doped carbon as highly efficient electrocatalysts in alkaline for hydrogen evolution reaction

Biao Zhang, C. Shi, N. Zhao, 2019, Journal of Catalysis.

First-principles study of protonic conduction in In-doped AZrO3 (A=Ca, Sr, Ba)

C. Shi, M. Yoshino, M. Morinaga, 2005 .

In-situ processing and aging behaviors of MgAl2O4 spinel whisker reinforced 6061Al composite

Xi‐Wen Du, C. Shi, N. Zhao, 2014 .

Effect of Sc and Zr additions on microstructures and corrosion behavior of Al-Cu-Mg-Sc-Zr alloys

C. Shi, N. Zhao, E. Liu, 2017 .

Effect of rare metal element interfacial modulation in graphene/Cu composite with high strength, high ductility and good electrical conductivity

C. Shi, N. Zhao, E. Liu, 2020 .

Fabrication of aluminum carbide nanowires by a nano-template reaction

C. Shi, N. Zhao, C. He, 2010 .

In-situ Al2O3-Al interface contribution towards the strength-ductility synergy of Al-CuO composite fabricated by solid-state reactive sintering

C. Shi, N. Zhao, C. He, 2021 .

In-Situ Al 2O 3-Al Interface Contribution Towards the Strength-Ductility Synergy of Al-CuO Composite Fabricated by Solid-State Reactive Sintering

C. Shi, N. Zhao, C. He, 2021 .

A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites

C. Shi, N. Zhao, C. He, 2020, Nature Communications.

Synergistic strengthening effect of alumina anchored graphene nanosheets hybrid structure in aluminum matrix composites

C. Shi, N. Zhao, C. He, 2019, Fullerenes, Nanotubes and Carbon Nanostructures.

An approach for fabricating Ni@graphene reinforced nickel matrix composites with enhanced mechanical properties

C. Shi, N. Zhao, C. He, 2018 .

In situ synthesis of CNTs in Mg powder at low temperature for fabricating reinforced Mg composites

K. Rhee, C. Shi, N. Zhao, 2013 .

Fabrication of Carbon Nanotube-Reinforced 6061Al Alloy Matrix Composites by an In Situ Synthesis Method Combined with Hot Extrusion Technique

C. Shi, N. Zhao, C. He, 2016, Acta Metallurgica Sinica (English Letters).

In Situ Synthesis of CNTs/Mg Composite Powders by CVD at Low Temperatures

C. Shi, N. Zhao, E. Liu, 2012 .

In-situ synthesis of graphene nanosheets coated copper for preparing reinforced aluminum matrix composites

C. Shi, N. Zhao, C. He, 2018 .

Effect of minor Sc and Zr on recrystallization behavior and mechanical properties of novel Al–Zn–Mg–Cu alloys

Huijun Li, P. Yao, C. Shi, 2016 .

Enhanced interface interaction between modified carbon nanotubes and magnesium matrix

C. Shi, N. Zhao, C. He, 2018 .

General rules governing carbon nanomaterial growth directly on metal support by chemical vapor deposition

C. Shi, N. Zhao, Jiajun Li, 2011 .

Study of Mg powder as catalyst carrier for the carbon nanotube growth by CVD

C. Shi, N. Zhao, Jiajun Li, 2011 .

Achieving highly dispersed nanofibres at high loading in carbon nanofibre–metal composites

C. Shi, N. Zhao, Jiajun Li, 2009, Nanotechnology.

Electromagnetic and microwave absorbing properties of multi-walled carbon nanotubes filled with Ni nanowire

Tianchun Zou, C. Shi, N. Zhao, 2010 .

Elevated temperature compressive properties and energy absorption response of in-situ grown CNT-reinforced Al composite foams

C. Shi, N. Zhao, C. He, 2017 .

Hierarchical pomegranate-like MnO@N-doped carbon with enhanced conduction loss and interfacial polarization for tunable and broadband microwave absorption

C. Shi, Chenxu Wang, Tong Chen, 2022, Journal of Materials Science.

Smart hybridization of Sn2Nb2O7/SnO2@3D carbon nanocomposites with enhanced sodium storage performance through self-buffering effects

C. Shi, N. Zhao, C. He, 2017 .

Effects of active elements on adhesion of the Al2O3/Fe interface: A first principles calculation

C. Shi, N. Zhao, C. He, 2021, Computational Materials Science.

Compressive properties and energy absorption of aluminum composite foams reinforced by in-situ generated MgAl2O4 whiskers

Tianchun Zou, C. Shi, N. Zhao, 2015 .

Activated Carbon Nanochains with Tailored Micro-Meso Pore Structures and Their Application for Supercapacitors

C. Shi, N. Zhao, Shan Zhu, 2015 .

Processing of open cell aluminum foams with tailored porous morphology

Bin Jiang, Jiajun Li, Naiqin Zhao, 2005 .

Correction to "Orientation Relationships and Interface Structure in MgAl2O4 and MgAlB4 Co-Reinforced Al Matrix Composites".

C. Shi, N. Zhao, C. He, 2020, ACS applied materials & interfaces.

Mo2C coating on diamond: Different effects on thermal conductivity of diamond/Al and diamond/Cu composites

C. Shi, N. Zhao, C. He, 2017 .

Microwave absorbing properties of activated carbon-fiber felt dipole array/epoxy resin composites

Tianchun Zou, C. Shi, N. Zhao, 2007 .

Microwave absorbing properties of activated carbon-fiber felt screens (vertical-arranged carbon fibers)/epoxy resin composites

Tianchun Zou, C. Shi, N. Zhao, 2006 .

Adhesion, bonding and mechanical properties of Mo doped diamond/Al (Cu) interfaces: A first principles study

C. Shi, N. Zhao, C. He, 2020 .

Towards strength-ductility synergy with favorable strengthening effect through the formation of a quasi-continuous graphene nanosheets coated Ni structure in aluminum matrix composite

C. Shi, N. Zhao, C. He, 2019, Materials Science and Engineering: A.

Fabrication and performance of SiC-reinforced Cu: Role of the aspect ratio of the SiC reinforcement phase

Yongchang Liu, C. Shi, N. Zhao, 2022, Materials & Design.

Direct synthesis of amorphous carbon nanotubes on Fe76Si9B10P5 glassy alloy particles

A. Makino, A. Inoue, C. Shi, 2013 .

In-situ fabrication of nano-sized TiO2 reinforced Cu matrix composites with well-balanced mechanical properties and electrical conductivity

C. Shi, N. Zhao, C. He, 2017 .

A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites

C. Shi, N. Zhao, C. He, 2020, Nature Communications.

Interface bonding and mechanical properties of copper/graphene interface doped with rare earth elements: First principles calculations

C. Shi, N. Zhao, C. He, 2022, Physica E: Low-dimensional Systems and Nanostructures.

Effect of Ti/Sc atom ratio on heterogeneous nuclei, microstructure and mechanical properties of A357-0.033Sr alloys

C. Shi, N. Zhao, C. He, 2016 .

Chemical vapor deposition synthesis of carbon nanospheres over Fe-based glassy alloy particles

C. Shi, N. Zhao, C. He, 2014 .

Low-temperature synthesis of multi-walled carbon nanotubes over Cu catalyst

Xi‐Wen Du, C. Shi, N. Zhao, 2012 .

Carbon-encapsulated Fe3O4 nanoparticles as a high-rate lithium ion battery anode material.

Jiajun Li, Naiqin Zhao, Chunnian He, 2013, ACS nano.

2D Space-Confined Synthesis of Few-Layer MoS2 Anchored on Carbon Nanosheet for Lithium-Ion Battery Anode.

Jian Qin, Xiang Zhang, Jiajun Li, 2015, ACS nano.

In situ formation of Cu-ZrO2 composites by chemical routes

Xi‐Wen Du, C. Shi, N. Zhao, 2006 .

One-Step Synthesis of Thin Graphite Layers Supported CNTs in Porous Copper by CVD

C. Shi, N. Zhao, E. Liu, 2012 .

Design of conical hollow ZnS arrays vertically grown on carbon fibers for lightweight and broadband flexible absorbers.

C. Shi, F. He, Chenxu Wang, 2021, Journal of colloid and interface science.

Ultralight metal foams

B. Jiang, C. Shi, N. Zhao, 2015, Scientific Reports.

Microstructural evolution in Al-Zn-Mg-Cu-Sc-Zr alloys during short-time homogenization

C. Shi, N. Zhao, C. He, 2015, International Journal of Minerals, Metallurgy, and Materials.

Combined Effects of Pre-deformation and Pre-aging on the Mechanical Properties of Al-Cu-Mg Alloy with Sc and Zr Addition

C. Shi, N. Zhao, C. He, 2018, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Unraveling the enhanced stability and strength of Al Σ9 (221)[$$ 1\bar{1}0 $$] symmetric tilt grain boundary with Mg segregation

C. Shi, N. Zhao, C. He, 2022, Journal of Materials Science.

A One-Pot Method to Prepare Gold Nanoparticle Chains with Chitosan

A. L. Tian, C. Shi, Linlin Wu, 2008 .

Ultrathin‐Nanosheet‐Induced Synthesis of 3D Transition Metal Oxides Networks for Lithium Ion Battery Anodes

C. Shi, N. Zhao, Shan Zhu, 2017 .

Preparation of Fe3O4/rebar graphene composite via solvothermal route as binder free anode for lithium ion batteries

C. Shi, N. Zhao, C. He, 2016 .

N‐Doped Graphene Modified 3D Porous Cu Current Collector toward Microscale Homogeneous Li Deposition for Li Metal Anodes

Rui Zhang, C. Shi, N. Zhao, 2018, Advanced Energy Materials.

In-situ grown CNTs modified SiO 2 /C composites as anode with improved cycling stability and rate capability for lithium storage

C. Shi, N. Zhao, C. He, 2018 .

Nitrogen and oxygen co-doped 3D nanoporous duct-like graphene@carbon nano-cage hybrid films for high-performance multi-style supercapacitors

C. Shi, C. He, Liping Wang, 2017 .

Synthesis of novel carbon nano-chains and their application as supercapacitors

C. Shi, N. Zhao, C. He, 2014 .

In-Situ Synthesis of Covalently-Bonded Sns2/Fes2 Heterostructures for High Rate Sodium Storage

C. Shi, Junwei Sha, Xixi Wang, 2023, SSRN Electronic Journal.

Sandwiched C@SnO2@C hollow nanostructures as an ultralong-lifespan high-rate anode material for lithium-ion and sodium-ion batteries

C. Shi, N. Zhao, C. He, 2017 .

Engineering Pocket‐Like Graphene–Shell Encapsulated FeS2: Inhibiting Polysulfides Shuttle Effect in Potassium‐Ion Batteries

C. Shi, N. Zhao, Shan Zhu, 2021, Advanced Functional Materials.

N-Doped Porous Carbon Nanofibers/Porous Silver Network Hybrid for High-Rate Supercapacitor Electrode.

C. Shi, N. Zhao, C. He, 2017, ACS applied materials & interfaces.

Yolk-shelled Sb@C nanoconfined nitrogen/sulfur co-doped 3D porous carbon microspheres for sodium-ion battery anode with ultralong high-rate cycling

Biao Zhang, C. Shi, N. Zhao, 2019 .

Free-standing porous carbon nanofiber/ultrathin graphite hybrid for flexible solid-state supercapacitors.

Zhijun Qiao, Jianli Kang, Jiajun Li, 2015, ACS nano.

Porous graphitic carbon nanosheets as a high-rate anode material for lithium-ion batteries.

C. Shi, N. Zhao, C. He, 2013, ACS applied materials & interfaces.

Space-Confined Synthesis of Three-Dimensional Boron/Nitrogen-Doped Carbon Nanotubes/Carbon Nanosheets Line-in-Wall Hybrids and Their Electrochemical Energy Storage Applications

C. Shi, N. Zhao, Shan Zhu, 2016 .

Controllable graphene incorporation and defect engineering in MoS2-TiO2 based composites: Towards high-performance lithium-ion batteries anode materials

Fang He, Biao Chen, Tingting Cao, 2017 .

Three-Dimensional Network of N-Doped Carbon Ultrathin Nanosheets with Closely Packed Mesopores: Controllable Synthesis and Application in Electrochemical Energy Storage.

C. Shi, N. Zhao, Shan Zhu, 2016, ACS applied materials & interfaces.

Improve the Supercapacity Performance of MnO2-Decorated Graphene by Controlling the Oxidization Extent of Graphene

C. Shi, N. Zhao, C. He, 2012 .

Synthesis of 2D/3D carbon hybrids by heterogeneous space-confined effect for electrochemical energy storage

C. Shi, N. Zhao, Shan Zhu, 2017 .

Ultrafine Ni(OH)2 nanoneedles on N-doped 3D rivet graphene film for high-performance asymmetric supercapacitor

C. Shi, N. Zhao, P. Liu, 2019, Journal of Alloys and Compounds.

The effect of heat treatment on mechanical properties of carbon nanofiber reinforced copper matrix composites

C. Shi, N. Zhao, Jiajun Li, 2009 .

Enhanced Hydrogen Evolution Reaction Performance of NiCo2P by Phosphorus Filling the Oxygen Vacancies in Thin Coating CeO2.

C. Shi, N. Zhao, C. He, 2019, ACS applied materials & interfaces.

Cycle performance improvement of Li-rich layered cathode material Li[Li0.2Mn0.54Ni0.13Co0.13]O2 by ZrO2 coating

C. Shi, N. Zhao, C. He, 2013 .

Porous MoS2/Carbon Spheres Anchored on 3D Interconnected Multiwall Carbon Nanotube Networks for Ultrafast Na Storage

C. Shi, N. Zhao, S. Qiao, 2018 .

Enhanced electrochemical hydrogen storage capacity of multi-walled carbon nanotubes by TiO2 decoration

Xi‐Wen Du, C. Shi, N. Zhao, 2011 .

Designed synthesis of NiCo-LDH and derived sulfide on heteroatom-doped edge-enriched 3D rivet graphene films for high-performance asymmetric supercapacitor and efficient OER

P. Liu, C. Shi, N. Zhao, 2018 .

Boosting the charge transfer efficiency of metal oxides/carbon nanotubes composites through interfaces control

C. Shi, N. Zhao, Shan Zhu, 2021 .

Three-dimensional graphene anchored Fe2O3@C core-shell nanoparticles as supercapacitor electrodes

C. Shi, N. Zhao, C. He, 2017 .

Multi-functional integration of pore P25@C@MoS2 core-double shell nanostructures as robust ternary anodes with enhanced lithium storage properties

C. Shi, N. Zhao, C. He, 2017 .

Hydrogen spillover storage on Ca-decorated graphene

C. Shi, N. Zhao, C. He, 2012 .

Mechanical properties and microstructures of carbon nanotube-reinforced Al matrix composite fabricated by in situ chemical vapor deposition

C. Shi, N. Zhao, S. Song, 2009 .

Preparation of Three-Dimensional Carbon Network Reinforced Epoxy Composites and Their Thermal Conductivity

C. Shi, N. Zhao, F. He, 2020, Transactions of Tianjin University.

Facile synthesis of 3D few-layered MoS₂ coated TiO₂ nanosheet core-shell nanostructures for stable and high-performance lithium-ion batteries.

C. Shi, N. Zhao, C. He, 2015, Nanoscale.

Interface modulation mechanism of alloying elements on the interface interaction and mechanical properties of graphene/copper composites

C. Shi, N. Zhao, C. He, 2022, Applied Surface Science.

Heterostructure Engineering of Core-Shelled Sb@Sb2 O3 Encapsulated in 3D N-Doped Carbon Hollow-Spheres for Superior Sodium/Potassium Storage.

C. Shi, N. Zhao, C. He, 2021, Small.

Properties of Co0.5Ni0.5Fe2O4/carbon nanotubes/polyimide nanocomposites for microwave absorption

K. Rhee, C. Shi, N. Zhao, 2012 .

Ultrasmall Fe2GeO4 nanodots anchored on interconnected carbon nanosheets as high-performance anode materials for lithium and sodium ion batteries

C. Shi, N. Zhao, C. He, 2018 .

“Ethanol–water exchange” nanobubbles templated hierarchical hollow β-Mo2C/N-doped carbon composite nanospheres as an efficient hydrogen evolution electrocatalyst

C. Shi, N. Zhao, C. He, 2018 .

Optimization of the chemical vapor deposition process for fabrication of carbon nanotube/Al composite powders

C. Shi, N. Zhao, S. Song, 2010 .

Enhanced Shielding Performance of Layered Carbon Fiber Composites Filled with Carbonyl Iron and Carbon Nanotubes in the Koch Curve Fractal Method

C. Shi, F. He, Xiang Zhang, 2020, Molecules.

Rational design of FeCo imbedded 3D porous carbon microspheres as broadband and lightweight microwave absorbers

C. Shi, F. He, Kai Song, 2020, Journal of Materials Science.

Microwave absorption studies of the planar equiangular spiral antenna array/epoxy resin composites

Tianchun Zou, C. Shi, N. Zhao, 2009 .

Synthesis of interconnected carbon nanosheets anchored with Fe3O4 nanoparticles as broadband electromagnetic wave absorber

C. Shi, N. Zhao, C. He, 2019, Chemical Physics Letters.

Electromagnetic and microwave absorbing properties of hollow carbon nanospheres

Tianchun Zou, C. Shi, N. Zhao, 2013, Bulletin of Materials Science.

Graphene oxide supported Yolk - Shell ZnS/Ni3S4 with the adjustable air layer for high performance of electromagnetic wave absorber.

C. Shi, Chenxu Wang, Yue Guo, 2022, Journal of colloid and interface science.

Low-temperature CVD synthesis of carbon-encapsulated magnetic Ni nanoparticles with a narrow distribution of diameters

Xi‐Wen Du, C. Shi, N. Zhao, 2006 .

In situ preparation of interconnected networks constructed by using flexible graphene/Sn sandwich nanosheets for high-performance lithium-ion battery anodes

Xiang Zhang, Jian Qin, Jiajun Li, 2015 .

Salt-template-assisted synthesis of robust 3D honeycomb-like structured MoS2 and its application as a lithium-ion battery anode

C. Shi, N. Zhao, C. He, 2016 .

In situ synthesized Li2S@porous carbon cathode for graphite/Li2S full cells using ether-based electrolyte

C. Shi, N. Zhao, C. He, 2017 .

Continuously hierarchical nanoporous graphene film for flexible solid-state supercapacitors with excellent performance

Xingxiang Zhang, Zhijia Zhang, Jianli Kang, 2016 .

Low-temperature synthesis of carbon onions by chemical vapor deposition using a nickel catalyst supported on aluminum

Xi‐Wen Du, Yongdan Li, C. Shi, 2006 .

Unraveling the mechanism of hydrogen evolution reaction on cobalt compound electrocatalysts

Tao Yang, C. Shi, N. Zhao, 2021 .

Ultralight Co/Ag composite foams: Synthesis, morphology and compressive property

B. Jiang, C. Shi, N. Zhao, 2016 .

Graphitization and microstructure transformation of nanodiamond to onion-like carbon

Zhi Qiao, C. Shi, N. Zhao, 2006 .

Synthesis of uniform and superparamagnetic Fe3O4 nanocrystals embedded in a porous carbon matrix for a superior lithium ion battery anode

C. Shi, N. Zhao, C. He, 2013 .

Three-Dimensional Carbon Networks Decorated with CoFe2O4 Nanoparticles Composites: Fabrication and Broadband Electromagnetic Wave Absorption Performance

C. Shi, N. Zhao, F. He, 2020 .

In-situ organic SEI layer for dendrite-free lithium metal anode

J. Lemmon, W. Liang, Rui Zhang, 2020 .

2D sandwich-like carbon-coated ultrathin TiO2@defect-rich MoS2 hybrid nanosheets: Synergistic-effect-promoted electrochemical performance for lithium ion batteries

C. Shi, N. Zhao, C. He, 2016 .

In situ synthesis of high content graphene nanoplatelets reinforced Cu matrix composites with enhanced thermal conductivity and tensile strength

C. Shi, N. Zhao, C. He, 2020 .

Lithiophilic Property of Artificial Alkoxides and Mercaptide Layers to Guide Uniform Li Nucleation for Stable Lithium Metal Anodes

Rui Zhang, C. Shi, N. Zhao, 2021, The Journal of Physical Chemistry C.

Ar Plasma Modified Multiwalled Carbon Nanotubes/NiFe2O4/Polyimide Nanocomposites

C. Shi, N. Zhao, E. Liu, 2011 .

Interfacial chemical bonding between carbon nanotube and aluminum substrate modulated by alloying elements

C. Shi, N. Zhao, C. He, 2015 .

Covalently bonded 3D rebar graphene foam for ultrahigh-areal-capacity lithium-metal anodes by in-situ loose powder metallurgy synthesis

Rui Zhang, C. Shi, N. Zhao, 2020 .

Small molecular benzoquinone derivative 1,3,5-tri(4-benzoquinone phenyl) benzene based on 6-electron reaction used as cathode material for Li-ion batteries

C. Shi, Fei Ding, Haichang Zhang, 2022, Materials Letters.

ZnO nanoconfined 3D porous carbon composite microspheres to stabilize lithium nucleation/growth for high-performance lithium metal anodes

Rui Zhang, Jiayan Luo, C. Shi, 2019, Journal of Materials Chemistry A.

Structure and photoluminescence of SiC/ZnO nanocomposites prepared by radio frequency alternate sputtering

Xi‐Wen Du, C. Shi, N. Zhao, 2010 .

Graphene Oxide-Assisted Synthesis of Microsized Ultrathin Single-Crystalline Anatase TiO2 Nanosheets and Their Application in Dye-Sensitized Solar Cells.

C. Shi, N. Zhao, C. He, 2016, ACS applied materials & interfaces.

Reversible formation of hybrid nanostructures via an organic linkage.

C. Shi, Liangfei Tian, Jin Zhu, 2007, Chemical communications.

Hydrogen-Bond-Promoted ORR Mechanism in P-Doped Fe–N–C Materials

C. Shi, N. Zhao, E. Liu, 2023, The Journal of Physical Chemistry C.

Doping effects on proton incorporation and conduction in SrZrO3

Masahiko Morinaga, Chunsheng Shi, C. Shi, 2006, J. Comput. Chem..

Interface and Doping Effects on Li Ion Storage Behavior of Graphene/Li2O

Tianshuai Wang, C. Shi, N. Zhao, 2017 .

Dopant-Modulating Mechanism of Lithium Adsorption and Diffusion at the Graphene/Li2S Interface

C. Shi, N. Zhao, C. He, 2018 .

Compressive responses and strengthening mechanisms of aluminum composite foams reinforced with graphene nanosheets

C. Shi, N. Zhao, C. He, 2019, Carbon.

Compressive Response and Energy Absorption Characteristics of In Situ Grown CNT‐Reinforced Al Composite Foams

C. Shi, N. Zhao, C. He, 2017 .

Fabrication of in-situ grown carbon nanotubes reinforced aluminum alloy matrix composite foams based on powder metallurgy method

C. Shi, N. Zhao, C. He, 2018, Materials Letters.

Synthesis of carbon nanostructures with different morphologies by CVD of methane

Jiajun Li, Naiqin Zhao, Chunnian He, 2007 .

Bamboo-shaped carbon nanotubes produced by catalytic decomposition of methane over nickel nanoparticles supported on aluminum

Xi‐Wen Du, Zhi Qiao, C. Shi, 2007 .

Surface reconstruction of CoO (111) and its effects on the formation of oxygen vacancy and OER activity

Tao Yang, C. Shi, N. Zhao, 2021 .

In Situ Internal Strengthened Carbon Nanotube Carpets on Graphene for Anti-Icing Application

C. Shi, N. Zhao, Shan Zhu, 2021, ACS Applied Nano Materials.

Carbon and few-layer MoS2 nanosheets co-modified TiO2 nanosheets with enhanced electrochemical properties for lithium storage

C. Shi, N. Zhao, C. He, 2018, Rare Metals.

Nitrogen-doped graphene network supported copper nanoparticles encapsulated with graphene shells for surface-enhanced Raman scattering.

C. Shi, N. Zhao, C. He, 2015, Nanoscale.

High-strength graphene network reinforced copper matrix composites achieved by architecture design and grain structure regulation

C. Shi, N. Zhao, C. He, 2019, Materials Science and Engineering: A.

Enhanced Cyclability of Cr8O21 Cathode for PEO-Based All-Solid-State Lithium-Ion Batteries by Atomic Layer Deposition of Al2O3

F. Ding, C. Shi, N. Zhao, 2021, Materials.

Magnetic properties and transmission electron microscopy studies of Ni nanoparticles encapsulated in carbon nanocages and carbon nanotubes

C. Shi, N. Zhao, C. He, 2008 .

W Clusters In Situ Assisted Synthesis of Layered Carbon Nanotube Arrays on Graphene Achieving High-Rate Performance.

C. Shi, N. Zhao, C. He, 2021, ACS applied materials & interfaces.

Hetero-structure effect on Na adsorption and diffusion in two dimensional composites

C. Shi, N. Zhao, E. Liu, 2018, Electrochimica Acta.

Hydrogen bonding regulation enables indanthrone as a stable and high-rate cathode for lithium-ion batteries

C. Shi, N. Zhao, Haichang Zhang, 2022, Energy Storage Materials.

Interface and Doping Effect on the Electrochemical Property of Graphene/LiFePO4

C. Shi, N. Zhao, C. He, 2016 .

An approach for obtaining the structural diversity of multi-walled carbon nanotubes on Ni/Al catalyst with low Ni content

C. Shi, N. Zhao, S. Song, 2010 .

Continuous confined interfacial design in graphene/Cu composites with structural integrity enables improvement of comprehensive properties

C. Shi, N. Zhao, C. He, 2023, Composites Part A: Applied Science and Manufacturing.

Armoring lithium metal anode with soft–rigid gradient interphase toward high-capacity and long-life all-solid-state battery

Rui Zhang, C. Shi, N. Zhao, 2023, Green Energy & Environment.

Defect Effects on the Interfacial Interactions between a (5, 5) Carbon Nanotube and an Al (111) Surface

C. Shi, N. Zhao, C. He, 2016 .

(FeSe2 + CoSe2) Nanoparticles Anchored on 3D Porous Ultrathin Carbon Nanosheets for High-Activity Oxygen Evolution Reaction

C. Shi, Junwei Sha, Xixi Wang, 2023, ACS Applied Nano Materials.

The influences of synthesis temperature and Ni catalyst on the growth of carbon nanotubes by chemical vapor deposition

C. Shi, N. Zhao, C. He, 2008 .

Enhanced electrochemical performance of LiFePO4 cathode with in-situ chemical vapor deposition synthesized carbon nanotubes as conductor

Xi‐Wen Du, C. Shi, N. Zhao, 2012 .

High mechanical strengthened CNTs/Al composite concepts with robust interface and intragranular reinforcement achieved via interfacial thermite reaction

Xiaofeng Chen, C. Shi, N. Zhao, 2023, Composites Part A: Applied Science and Manufacturing.

Achieving high mechanical properties and corrosion resistance of Al-Zn-Mg matrix composites via regulating intragranular reinforcements

Xiaofeng Chen, C. Shi, N. Zhao, 2023, Journal of Materials Science & Technology.

Effect of Y2O3 on the mechanical properties of open cell aluminum foams

B. Jiang, Xi‐Wen Du, C. Shi, 2006 .

Enhanced electrochemical properties of LiCo0.5Ni0.5O2 by Ti-doping: A first-principle study

C. Shi, N. Zhao, C. He, 2015 .

Electronic reconfiguration of Co2P induced by Cu doping enhancing oxygen reduction reaction activity in zinc–air batteries

Tao Yang, Biao Zhang, C. Shi, 2019, Journal of Materials Chemistry A.

Towards the work hardening and strain delocalization achieved via in-situ intragranular reinforcement in Al-CuO composite

D. Wan, Xiaofeng Chen, C. Shi, 2023, Acta Materialia.

First-Principles Study of Protonic Conduction in Acceptor-Doped SrZrO3

C. Shi, M. Yoshino, M. Morinaga, 2004 .

Ni0.85Se Nanoparticles Anchored on rGO as an Efficient Polysulfides Immobilizer for Lithium-Sulfur Batteries

Rui Zhang, C. Shi, Ruochen Tang, 2023, International Journal of Electrochemical Science.

Hierarchically structured carbon-coated SnO2-Fe3O4 microparticles with enhanced lithium storage performance

C. Shi, N. Zhao, C. He, 2016 .

NaCl sealing Strategy-Assisted synthesis CoO-Co heterojunctions as efficient oxygen electrocatalysts for Zn air batteries.

Wei Zhou, C. Shi, C. He, 2023, Journal of colloid and interface science.

Carbon-coated Fe2O3 nanocrystals with enhanced lithium storage capability

C. Shi, N. Zhao, C. He, 2015 .

Boron doping effect on the interface interaction and mechanical properties of graphene reinforced copper matrix composite

C. Shi, N. Zhao, C. He, 2017 .

Synthesis of carbon nanohorns by the simple catalytic method

Xi‐Wen Du, C. Shi, N. Zhao, 2009 .

Self-healing polymer-based electrolyte induced by amorphous three-dimensional carbon for high-performance solid-state Li metal batteries

Rui Zhang, C. Shi, N. Zhao, 2023, Energy Storage Materials.

Sandwiched graphene inserted with graphene-encapsulated yolk–shell γ-Fe2O3 nanoparticles for efficient lithium ion storage

C. Shi, N. Zhao, C. He, 2017 .

One-pot synthesis of uniform Fe3O4 nanocrystals encapsulated in interconnected carbon nanospheres for superior lithium storage capability

C. Shi, N. Zhao, C. He, 2013 .

On the affected strength of Al grain boundaries by Zn segregation: A first-principles interpretation

C. Shi, N. Zhao, C. He, 2022, Computational materials science.

Defects control of aluminum alloys and their composites fabricated via laser powder bed fusion: A review

Zongqing Ma, C. Shi, N. Zhao, 2023, Journal of Materials Processing Technology.

Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network.

C. Shi, N. Zhao, C. He, 2017, Nanoscale.

Synthesis and growth mechanism of metal filled carbon nanostructures by CVD using Ni/Y catalyst supported on copper

Xi‐Wen Du, C. Shi, N. Zhao, 2008 .

Starch-Based Superabsorbent Hydrogel with High Electrolyte Retention Capability and Synergistic Interface Engineering for Long-Lifespan Flexible Zinc-Air Batteries.

C. Shi, N. Zhao, Simi Sui, 2023, Angewandte Chemie.

Facile synthesis of 3D few-layered MoS₂ coated TiO₂ nanosheet core-shell nanostructures for stable and high-performance lithium-ion batteries.

C. Shi, N. Zhao, C. He, 2015, Nanoscale.

Decreasing Interfacial Pitfalls with Self-Grown Sheet-Like Li2 S Artificial Solid-Electrolyte Interphase for Enhanced Cycling Performance of Lithium Metal Anode.

Rui Zhang, C. Shi, N. Zhao, 2023, Small.

Surface double phase network modified lithium rich layered oxides with improved rate capability for Li-ion batteries.

C. Shi, N. Zhao, C. He, 2015, ACS applied materials & interfaces.

Enhanced Hydrogen Evolution Reaction Performance of NiCo2P by Phosphorus Filling the Oxygen Vacancies in Thin Coating CeO2.

C. Shi, N. Zhao, C. He, 2019, ACS applied materials & interfaces.

Three-dimensional porous bowl-shaped carbon cages interspersed with carbon coated Ni–Sn alloy nanoparticles as anode materials for high-performance lithium-ion batteries

C. Shi, N. Zhao, C. He, 2017 .

Free-standing porous carbon nanofiber/ultrathin graphite hybrid for flexible solid-state supercapacitors.

C. Shi, N. Zhao, Jiajun Li, 2015, ACS nano.

Catalytic synthesis of carbon nanostructures using Fe(OH)3/Al as catalyst precursors

Xi‐Wen Du, C. Shi, N. Zhao, 2009 .

Interfacial effect on the electrochemical properties of the layered graphene/metal sulfide composites as anode materials for Li-ion batteries

C. Shi, N. Zhao, C. He, 2016 .

Co9S8/Porous Carbon Catalysts Boosting Lithium–Sulfur Batteries: NaCl Assisted-Carbothermal Reduction Preparation and Distribution of Relaxation Time Technique Assessment

C. Shi, Biao Chen, Chengwei Zhang, 2023, Energy & Fuels.

Defects induced the bilayer graphene-copper hybrid and its effect on mechanical properties of graphene reinforced copper matrix composites

C. Shi, N. Zhao, C. He, 2023, Applied Surface Science.