I. Brook

发表

Development, optimization and characterization of a full-thickness tissue engineered human oral mucosal model for biological assessment of dental biomaterials

M. Thornhill, K. Moharamzadeh, I. Brook, 2008, Journal of materials science. Materials in medicine.

Bespoke human hypertrophic chondrocytic cell lines provide the osteoinductive signals required for vascularized bone formation.

G. Foster, I. Brook, R. Waddington, 2006, Tissue engineering.

Characterization of Multilayered Tissue-Engineered Human Alveolar Bone and Gingival Mucosa.

K. Moharamzadeh, I. Brook, Thafar Almela, 2017, Tissue engineering. Part C, Methods.

Evaluation of the Effects of Ethanol on Monolayer and 3D Models of Human Oral Mucosa

Louise E Smith, K. Moharamzadeh, I. Brook, 2014 .

HPLC analysis of components released from dental composites with different resin compositions using different extraction media

K. Moharamzadeh, I. Brook, A. Scutt, 2007, Journal of materials science. Materials in medicine.

In vitro interaction between primary bone organ cultures, glass-ionomer cements and hydroxyapatite/tricalcium phosphate ceramics.

I. Brook, G. Craig, D. Lamb, 1991, Biomaterials.

In vitro biocompatibility of a novel Fe2O3 based glass ionomer cement.

I. Reaney, P. Hatton, I. Brook, 2006, Journal of dentistry.

Repair of bone defects in vivo using tissue engineered hypertrophic cartilage grafts produced from nasal chondrocytes.

A. Crawford, P. Hatton, I. Brook, 2017, Biomaterials.

Biologic assessment of antiseptic mouthwashes using a three-dimensional human oral mucosal model.

K. Moharamzadeh, I. Brook, R. van Noort, 2009, Journal of periodontology.

Mucotoxicity of dental composite resins on a tissue-engineered human oral mucosal model.

M. Thornhill, K. Moharamzadeh, I. Brook, 2008, Journal of dentistry.

Cytotoxicity of resin monomers on human gingival fibroblasts and HaCaT keratinocytes.

K. Moharamzadeh, I. Brook, A. Scutt, 2007, Dental materials : official publication of the Academy of Dental Materials.

Plasma copolymer surfaces of acrylic acid/1,7 octadiene: surface characterisation and the attachment of ROS 17/2.8 osteoblast-like cells.

R. Short, I. Brook, S. Macneil, 1998, Biomaterials.

A comparative study of cell attachment to self assembled monolayers and plasma polymers

R. Short, I. Brook, G. Leggett, 1998 .

The elimination of cross-infection in dental practice--a 5-year follow-up'

D. Lamb, I. Brook, 1989, British Dental Journal.

A lignocaine patch for dental analgesia safety and early pharmacology

G. Tucker, I. Brook, R. Boyes, 1989 .

Bone response to a titanium aluminium nitride coating on metallic implants

I. Brook, C. Freeman, 2006, Journal of materials science. Materials in medicine.

Treatment of the edentulous atrophic maxilla using

I. Brook, J. Yates, S. Atkins, 2014 .

Contour analysis of an implant--soft tissue interface.

K. Moharamzadeh, I. Brook, A. Palmquist, 2013, Journal of periodontal research.

Development of a novel model for the investigation of implant-soft tissue interface.

K. Moharamzadeh, I. Brook, A. Palmquist, 2010, Journal of periodontology.

Aetiology and incidence of facial fractures in adults.

I. Brook, N. Wood, 1983, International journal of oral surgery.

A review of histomorphometric analysis techniques for assessing implant-soft tissue interface

K. Moharamzadeh, I. Brook, R. van Noort, 2011, Biotechnic & histochemistry : official publication of the Biological Stain Commission.

Evaluation of Osteoconductive and Osteogenic Potential of a Dentin-Based Bone Substitute Using a Calvarial Defect Model

I. Hussain, K. Moharamzadeh, I. Brook, 2012, International journal of dentistry.

Bone cell interactions with a granular glass-ionomer bone substitute material: in vivo and in vitro culture models.

I. Brook, G. Craig, P. Hatton, 1992, Biomaterials.

Initial in-vivo evaluation of glass-ionomer cements for use as alveolar bone substitutes.

I. Brook, G. Craig, D. Lamb, 1991, Clinical materials.

Biocompatibility of glass-ionomer bone cements.

P. Hatton, I. Brook, K. Hurrell-Gillingham, 2006, Journal of dentistry.

Glass-ionomer cement: evaluation as an orbital implant

G. Bernatzky, I. Brook, G. Craig, 1999, Graefe's Archive for Clinical and Experimental Ophthalmology.

Comparison of in vitro and in vivo Bioactivity of SrO—CaO—ZnO—SiO2 Glass Grafts

I. Brook, D. Boyd, P. Farthing, 2009, Journal of biomaterials applications.

Preliminary investigation of novel bone graft substitutes based on strontium–calcium–zinc–silicate glasses

I. Brook, D. Boyd, P. Farthing, 2009, Journal of materials science. Materials in medicine.

In vivo response of strontium and zinc-based ionomeric cement implants in bone

J. I. Escalante-García, K. Johal, I. Brook, 2002, Journal of materials science. Materials in medicine.

In vitro biocompatibility of fluorcanasite glass-ceramics for bone tissue repair.

I. Reaney, P. Hatton, I. Brook, 2007, Journal of biomedical materials research. Part A.

Biocompatibility of Resin-based Dental Materials

Keyvan Moharamzadeh, Ian M. Brook, K. Moharamzadeh, 2009, Materials.

Evaluation of glass-ionomer cements for use as bone substitutes with reference to their value for treatment of atrophic alveolar bone

I. Brook, 1994 .

Dependence of in vitro biocompatibility of ionomeric cements on ion release

I. Brook, P. Hatton, A. Devlin, 1998, Journal of materials science. Materials in medicine.

In vivo response of ionomeric cements: effect of glass composition, increasing soda or calcium fluoride content

K. Johal, I. Brook, G. Craig, 1995 .

The release of serum proteins and dye from glass ionomer (polyalkenoate) and acrylic cements: a pilot study

S. Downes, P. Hatton, I. Brook, 1994 .

The immediate effects of ionomeric and acrylic bone cements on peripheral nerve function

I. Brook, A. Loescher, P. Robinson, 1994 .

X-ray microanalysis of bone and implanted bone substitutes

P. Hatton, I. Brook, 1992 .

The effect of calcium fluoride (CaF(2)) on the chemical solubility of an apatite-mullite glass-ceramic material.

I. Brook, R. van Noort, A. Johnson, 2005, Dental materials : official publication of the Academy of Dental Materials.

Novel Fe2O3-Containing Glass Ionomer Cements: Glass Characterisation

I. Reaney, P. Hatton, I. Brook, 2005 .

Bone healing following the use of hydroxyapatite or ionomeric bone substitutes alone or combined with a guided bone regeneration technique: an animal study.

I. Brook, G. Craig, L. A. Salata, 1998, The International journal of oral & maxillofacial implants.

Drug release from acrylic polymers via channels and cracks: in vitro studies with hydrocortisone.

I. Brook, R. van Noort, 1985, Biomaterials.

Development of biodegradable electrospun scaffolds for dermal replacement.

Sheila MacNeil, John W Haycock, Irene Canton, 2008, Biomaterials.

Reactive Inkjet Printing of Regenerated Silk Fibroin Films for Use as Dental Barrier Membranes

Patrick J. Smith, I. Brook, Patrick M Rider, 2018, Micromachines.

Development of three-dimensional tissue engineered bone-oral mucosal composite models

Keyvan Moharamzadeh, Thafar Almela, Ian M. Brook, 2016, Journal of Materials Science: Materials in Medicine.

Tissue response to subperiosteal implantation of dense hydroxyapatite: case report.

I. Brook, G. Craig, D. Lamb, 1989, Biomaterials.

Two-stage combined vestibuloplasty and partial mandibular ridge augmentation with hydroxyapatite.

I. Brook, D. Lamb, 1989, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

Management of the mobile fibrous ridge in the atrophic maxilla using porous hydroxyapatite blocks'

I. Brook, G. Craig, N. Van, 1987, British Dental Journal.

Biological evaluation of nano-hydroxyapatite–zirconia (HA–ZrO2) composites and strontium–hydroxyapatite (Sr–HA) for load-bearing applications

I. Brook, S. Hampshire, M. Towler, 2012, Journal of biomaterials applications.

Biological evaluation of nano hydroxyapatite zirconia (HA-ZrO2) composites for load bearing applications.

I. Brook, S. Hampshire, M. Towler, 2012 .

The effect of investment materials on the surface of cast fluorcanasite glasses and glass–ceramics

I. Reaney, P. Hatton, I. Brook, 2008, Journal of materials science. Materials in medicine.

Microstructure and mechanical properties of fluorcanasite glass-ceramics for biomedical applications

I. Reaney, P. Hatton, I. Brook, 2008 .

Bone tissue engineering in maxillofacial region

K. Moharamzadeh, I. Brook, Thafar Almela, 2017 .

In vitro biocompatibility of modified potassium fluorrichterite and potassium fluorrichterite-fluorapatite glass–ceramics

I. Reaney, P. Hatton, I. Brook, 2011, Journal of materials science. Materials in medicine.

Correction of local alveolar defects by implantation of hydroxyapatite: a preliminary study

I. Brook, D. Lamb, 1986, British Dental Journal.

The biological seal of the implant–soft tissue interface evaluated in a tissue-engineered oral mucosal model

K. Moharamzadeh, I. Brook, A. Palmquist, 2012, Journal of The Royal Society Interface.

Transplantation of oral mucosa explants using different biological and synthetic membranes in an attempt to achieve one-stage reconstruction of soft-tissue defects

Louise E. Smith, S. MacNeil, A. Ryan, 2012 .

The Brånemark Novum protocol for same day teeth: a global perspective

I. Brook, J. Cowpe, 2002 .

A comparative in vitro study of fixation of mandibular fractures with paraskeletal clamps or screw plates.

I. Brook, C. Crofts, A. Trowbridge, 1990, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

Dental implants and onlay bone grafts in the anterior maxilla: analysis of clinical outcome.

I. Brook, C. McCarthy, P. F. Wragg, 2003, The International journal of oral & maxillofacial implants.

Tissue-engineered Oral Mucosa

S. MacNeil, S. MacNeil, C. Murdoch, 2012, Journal of dental research.

Treatment of the edentulous atrophic maxilla using zygomatic implants: evaluation of survival rates over 5-10 years.

I. Brook, J. Yates, S. Atkins, 2014, International journal of oral and maxillofacial surgery.

Management of the atrophic anterior maxilla by combined hydroxyapatite augmentation and vestibuloplasty: a pilot study.

I. Brook, D. Lamb, 1991, The British journal of oral & maxillofacial surgery.

Inhalation of a denture fragment complicating facial trauma.

I. Brook, J. Lancer, T. K. Ong, 1988, The British journal of oral & maxillofacial surgery.

Ultrastructural analysis of implant-soft tissue interface on a three dimensional tissue-engineered oral mucosal model.

K. Moharamzadeh, I. Brook, A. Palmquist, 2012, Journal of biomedical materials research. Part A.

The significance of cell-related challenges in the clinical application of tissue engineering.

Keyvan Moharamzadeh, Thafar Almela, Ian M. Brook, 2016, Journal of biomedical materials research. Part A.

Controlling drug release from acrylic polymers: in vitro studies with potential oral inserts.

I. Brook, C. Douglas, R. van Noort, 1986, Biomaterials.

Controlled intraoral delivery of hydrocortisone sodium succinate.

I. Brook, R. van Noort, A. V. Pandurangi, 1991, Oral surgery, oral medicine, and oral pathology.

An introduction to the 'Mennen plate' and its use in treatment of fractures of the edentulous mandible.

I. Brook, E. Trowbridge, C. Crofts, 1990, British Journal of Oral and Maxillofacial Surgery.

Iatrogenic injury caused by intermaxillary fixation screws.

I. Brook, A. Majumdar, 2002, The British journal of oral & maxillofacial surgery.

3D printed tissue engineered model for bone invasion of oral cancer.

Lobat Tayebi, Farahnaz Fahimipour, Mohammadreza Tahriri, 2018, Tissue & cell.

Inhibition of tissue prostaglandin synthesis during third molar surgery: use of preoperative fenbufen.

I. Brook, A. C. Smith, 1990, The British journal of oral & maxillofacial surgery.

Determination of relative in vivo osteoconductivity of modified potassium fluorrichterite glass–ceramics compared with 45S5 bioglass

I. Reaney, P. Hatton, I. Brook, 2012, Journal of Materials Science: Materials in Medicine.

Prediction of osteoconductive activity of modified potassium fluorrichterite glass-ceramics by immersion in simulated body fluid

I. Reaney, P. Hatton, I. Brook, 2010, Journal of materials science. Materials in medicine.

Sinus augmentation bone grafts for the provision of dental implants: report of clinical outcome.

I. Brook, Caroline McCarthy, Rajesh R Patel, 2003, The International journal of oral & maxillofacial implants.

Simulation of cortico-cancellous bone structure by 3D printing of bilayer calcium phosphate-based scaffolds

Lobat Tayebi, Farahnaz Fahimipour, Mohammadreza Tahriri, 2017 .

In vivo safety and efficacy testing of a thermally triggered injectable hydrogel scaffold for bone regeneration and augmentation in a rat model

C. L. Le Maitre, P. Hatton, I. Brook, 2018, Oncotarget.

Implant treatment.

I. Brook, C. Freeman, D. Lamb, 2002, British dental journal.

The effects of implanted ionomeric and acrylic bone cements on peripheral nerve function

I. Brook, A. Loescher, P. Robinson, 1994 .

Molecular Engineering of Surfaces by Plasma Copolymerization and Enhanced Cell Attachment and Spreading

M. Cambray-Deakin, R. Short, I. Brook, 1999 .

Evaluation of Modified Fluorcanasite Glass-Ceramics for Bone Tissue Augmentation

I. Reaney, P. Hatton, I. Brook, 2005 .

The use of particulate and block forms of hydroxylapatite for alveolar augmentation.

I. Brook, D. Lamb, 1987, The International journal of oral & maxillofacial implants.

Localization of type VI collagen in tissue-engineered cartilage on polymer scaffolds.

A. Hollander, S. Dickinson, A. Crawford, 2006, Tissue engineering.

Development of biodegradable electrospun scaffolds for dermal replacement.

S. MacNeil, J. Haycock, A. Ryan, 2008, Biomaterials.