G. Labeas

发表

Torsional vibration of a cracked rod by variational formulation and numerical analysis

T. Chondros, G. Labeas, 2007 .

Investigation on the Static Response and Failure Process of Metallic Open Lattice Cellular Structures

G. N. Labeas, M. Sunaric, G. Labeas, 2010 .

Tensile behaviour of corroded and hydrogen embrittled 2024 T351 aluminum alloy specimen

G. Labeas, S. Pantelakis, A. Kermanidis, 2006 .

Elastic modulus and Poisson’s ratio determination of micro-lattice cellular structures by analytical, numerical and homogenisation methods

G. Labeas, E. Ptochos, George Labeas, 2012 .

Shear Modulus Determination of Cuboid Metallic Open‐Lattice Cellular Structures by Analytical, Numerical and Homogenisation Methods

G. Labeas, E. Ptochos, Evangelos Ptochos, 2012 .

Multi-scale modeling of tensile behavior of carbon nanotube-reinforced composites

G. N. Labeas, Konstantinos Tserpes, Paraskevas Papanikos, 2008 .

Microstructure modifications induced by a laser surface treatment in an AA7449 aluminium alloy

A. Deschamps, Y. Bréchet, U. Heckenberger, 2011 .

Development of a local three-dimensional numerical simulation model for the laser forming process of aluminium components

G. N. Labeas, G. Labeas, 2008 .

Optimisation of laser welding process for thermoplastic composite materials with regard to component quality and cost

G. Labeas, S. Pantelakis, C. Katsiropoulos, 2009 .

Experimental and numerical investigation of the influence of imperfect bonding on the strength of NCF double-lap shear joints

G. N. Labeas, Konstantinos Tserpes, K. Tserpes, 2010 .

Mesomechanical analysis of non-crimp fabric composite structural parts

K. Tserpes, G. Labeas, 2009 .

Impact Behaviour Modelling of a Composite Leading Edge Structure

T. Kermanidis, G. Labeas, 2006 .

Static and stability analysis of composite plates by a semi-analytical method

T. Kermanidis, G. Labeas, 1995 .

Multi-scale modeling of the mechanical response of plain weave composites and cellular solids

K. Tserpes, G. Labeas, S. Pantelakis, 2010 .

Analysis of the formability magnesium alloys using a new ductile fracture criterion

G. Labeas, V. B. Watiti, 2011, International Journal of Material Forming.

Mechanical characterisation of aluminium alloy 7449-T7651 at high strain rates and elevated temperatures using split hopkinson bar testing

G. Labeas, G. Mylonas, 2014, Experimental Techniques.

Prediction of residual stresses and distortions due to laser beam welding of butt joints in pressure vessels

G. N. Labeas, G. A. Moraitis, G. Labeas, 2009 .

Fatigue damage accumulation and residual strength assessment of CFRP laminates

G. N. Labeas, Konstantinos Tserpes, Paraskevas Papanikos, 2004 .

A concept to optimize quality and cost in thermoplastic composite components applied to the production of helicopter canopies

G. N. Labeas, Sp.G. Pantelakis, Ch.V. Katsiropoulos, 2009 .

1 OPTIMIZATION OF LASER WELDING PROCESS FOR THERMOPLASTIC COMPOSITE MATERIALS WITH REGARD TO QUALITY AND COST

G. Labeas, S. Pantelakis, C. Katsiropoulos, 2008 .

Laser beam welding residual stresses of cracked T-joints

G. Labeas, I. Diamantakos, 2013 .

Numerical investigation of through crack behaviour under welding residual stresses

G. N. Labeas, I. Diamantakos, G. Labeas, 2009 .

Assessing the effect of residual stresses on the fatigue behavior of integrally stiffened structures

G. N. Labeas, Th.B. Kermanidis, I. Diamantakos, 2009 .

Analysis of Crack Patterns Under Three-Dimensional Residual Stress Field

T. Kermanidis, G. Labeas, I. Diamantakos, 2009 .

Numerical modelling of shot peening process and corresponding products: Residual stress, surface roughness and cold work prediction

G. N. Labeas, G. Labeas, G. Mylonas, 2011 .

Modeling, analysis and validation of the structural response of a large-scale composite wing by ground testing

G. Labeas, V. Kostopoulos, R. Keimer, 2023, Composite Structures.

Investigation of friction stir welding process with emphasis on calculation of heat generated due to material stirring

G. Labeas, G. Moraitis, 2010 .

Efficient analysis of large-scale structural problems with geometrical non-linearity

G. N. Labeas, S. D. Belesis, G. Labeas, 2011 .

Towards the Design of a Multispar Composite Wing

G. N. Labeas, Dimitriοs Stamatelos, G. Labeas, 2020, Comput..

Strength prediction of bolted joints in graphite/epoxy composite laminates

G. N. Labeas, Th.B. Kermanidis, Konstantinos Tserpes, 2002 .

Optimization of Laser Transmission Welding Process for Thermoplastic Composite Parts using Thermo-Mechanical Simulation

G. Labeas, C. Katsiropoulos, G. Moraitis, 2010 .

Simulation of the Electroimpulse De-Icing Process of Aircraft Wings

G. N. Labeas, I. Diamantakos, M. Sunaric, 2006 .

EFFICIENT ENGINEERING APPROACHES FOR THE PREDICTION OF FATIGUE PROPAGATION OF CORNER CRACKS IN THE CASE OF MULTIPLE SITE DAMAGE UDC 539 . 388 . 1 539

G. Labeas, T. Kermanidis, J. Diamantakos, 2003 .

Residual stress and distortion calculation of laser beam welding for aluminum lap joints

G. N. Labeas, G. A. Moraitis, G. Labeas, 2008 .

Analytical calculation of local buckling and post-buckling behavior of isotropic and orthotropic stiffened panels

G. N. Labeas, Konstantinos Tserpes, D. G. Stamatelos, 2011 .

Adaptative Progressive Damage Modeling for Large-scale Composite Structures

G. N. Labeas, Konstantinos Tserpes, I. Diamantakos, 2012 .

Prediction of Damage Propagation and Failure of Composite Structures (Without Testing)

G. Labeas, G. Labeas, 2009 .

ASSESSMENT OF WIDESPREAD FATIGUE DAMAGE IN THE PRESENCE OF CORROSION UDC 539 . 388 . 1 620

G. Labeas, S. Pantelakis, A. Kermanidis, 2003 .

Interaction of damage failure and post-buckling behaviour of composite plates with cut-outs by progressive damage modelling

G. N. Labeas, S. Belesis, G. Labeas, 2008 .

Investigation on a multispar composite wing

G. N. Labeas, D G Stamatelos, G. Labeas, 2012 .

Stress multiaxiality factor for crack growth prediction using the strain energy density theory

T. Kermanidis, G. Labeas, 2006 .

Numerical Investigation on the Tensile Behaviour of Pre-Corroded 2024 Aluminium Alloy

G. Labeas, S. Pantelakis, P. Petroyiannis, 2006 .

Fatigue Crack Growth Behaviour of Friction Stir Welded Aluminium Alloys

G. Labeas, S. Peppa, 2015 .

Crack link-up for multiple site damage using an energy density approach

G. N. Labeas, J. Diamantakos, Th.B. Kermanidis, 2005 .

Crushing behaviour of the energy absorbing ‘tensor skin’ panels

G. N. Labeas, T. H. Kermanidis, G. Labeas, 2003 .

An Integrated Methodology Assessing the Aging Behaviour of Aircraft Structures

G. N. Labeas, I. Diamantakos, G. Labeas, 2006 .

Fatigue crack propagation trajectories under mixed-mode cyclic loading

Dimitrios G. Pavlou, G. N Labeas, N. Vlachakis, 2003 .