Dirk Landgrebe

发表

Concurrent and geometry-dependent selection of material and joining technology — An initial utility-based systematic decision-making tool

Michael Vielhaber, Jerome Kaspar, Saphir A. Choudry, 2018, 2018 Annual IEEE International Systems Conference (SysCon).

Optimisation of component performance via structuring

Petr Kurka, Markus Werner, Dirk Landgrebe, 2015 .

Concurrent Assessment of Material and Joining Technology in Lightweight Engineering

Michael Vielhaber, Jerome Kaspar, Saphir A. Choudry, 2018, Sustainable Design and Manufacturing 2018.

High-Speed Incremental Forming – New Technologies For Flexible Production Of Sheet Metal Parts

Werner Homberg, Dirk Landgrebe, Robert Springer, 2019, Procedia Manufacturing.

New Approaches for Improved Efficiency and Flexibility in Process Chains of Press Hardening

Frank Schieck, Julia Schönherr, Norbert Pierschel, 2015 .

Das Falzkleben fehlerfrei gestalten

Dirk Landgrebe, Fred Jesche, Wolfgang Woyke, 2017, adhäsion KLEBEN & DICHTEN.

Tolerances and Measuring Strategies in the Virtual Process Chain for Spot Welded Structures; Substitute Modeling and Automating the Calibration Procedure

Christian Schwarz, Dirk Landgrebe, Reinhard Mauermann, 2015 .

A Multidimensional Assessment and Selection Methodology: Optimized Decision-making of Joining Technologies in Automobile Body Development

Steffen Müller, Saphir A. Choudry, Frank Riedel, 2018 .

Hot forming of large spur gears

Dirk Landgrebe, Andreas Sterzing, Mike Lahl, 2017 .

Improving the Ramp-Up Process of a Body-Construction Line by Numerical Supported Design of Clamping Devices and FEM Based Tolerance Prognosis

Dirk Landgrebe, Reinhard Mauermann, Patrick Ackert, 2015 .

A METHODICAL APPROACH FOR THE TECHNOLOGICAL ASSESSMENT OF JOINING TECHNOLOGIES - OPTIMIZED DECISION-MAKING IN CAR BODY DEVELOPMENT

Saphir A. Choudry, Dirk Landgrebe, Uwe Alber, 2018 .

Root Cause Analysis of Deep Drawing Processes with Superimposed Low-Frequency Vibrations on Servo-Screw Presses - A Practical Research on Predictability in Simulation

Holger Schlegel, Peter Müller, Dirk Landgrebe, 2018, ICINCO.

Structuring by electromagnetic forming and by forming with an elastomer punch as a tool for component optimisation regarding mechanical stiffness and acoustic performance

Petr Kurka, Dirk Landgrebe, Simon Kimme, 2015 .

Hot Rolling of Large Gears

Dirk Landgrebe, Andreas Sterzing, Mike Lahl, 2017 .

Smart Process Combination for Aluminum/Plastic Hybrid Components

Welf-Guntram Drossel, Dirk Landgrebe, Lothar Kroll, 2018 .

A Methodical Approach for an Economic Assessment of Joining Technologies under Risk – Optimized Decision-making in Automobile Body Development

Saphir A. Choudry, Dirk Landgrebe, Steffen Sandmann, 2018 .

Concept for Further Development of Self-pierce Riveting by Using Cyber Physical Systems☆

Dirk Landgrebe, Tobias Falk, Mathias Jäckel, 2016 .

New lightweight construction prospects enabled by hydroforming

Welf-Guntram Drossel, Marco Pröhl, Petr Kurka, 2015 .

A methodical approach for an ecological assessment of joining technologies — optimized decision-making in automobile body development

Saphir A. Choudry, Dirk Landgrebe, Uwe Alber, 2018, 2018 7th International Conference on Industrial Technology and Management (ICITM).

The effect of cushion-ram pulsation on hot stamping

Dirk Landgrebe, Reinhard Mauermann, Stefan Polster, 2016 .

Deep Drawing with Local Hardening on Digital Multi-axis Servo Press

Dirk Landgrebe, Reinhard Mauermann, Sebastian Kriechenbauer, 2015, Acta Metallurgica Sinica (English Letters).

Designing a Flawless Hem Flange Bonding Process

Dirk Landgrebe, Fred Jesche, Wolfgang Woyke, 2017, ADHESION ADHESIVES&SEALANTS.

Hot Gas Forming for Advanced Tubular Automobile Components: Opportunities and Challenges

Frank Schieck, Dirk Landgrebe, 2015 .

Methodology for the early analysis and evaluation of the resource efficiency of process chains for manufacturing hybrid structures

Birgit Awiszus, Dirk Landgrebe, Uwe Götze, 2019 .

Conserving Resources in Production - Breaking New Ground

Dirk Landgrebe, A. Rautenstrauch, Verena Kräusel, 2017 .

Energetic evaluation of press hardening processes

Dirk Landgrebe, Verena Kräusel, Michael Bräunig, 2019 .

Efficient Manufacturing Methods for Hybrid Metal-Polymer Components

Roland Müller, Frank Schieck, Peter Scholz, 2016 .

Hybrid Laminate for Haptic Input Device with Integrated Signal Processing

Wolfram Hardt, Dirk Landgrebe, Lothar Kroll, 2018 .

Continuous Manufacturing of Piezoceramic Hybrid Laminates for Functionalised Formed Structural Components

Wolfram Hardt, Dirk Landgrebe, Lothar Kroll, 2017 .

Ressourcenschonende Produktion

Dirk Landgrebe, Markus Werner, Anja Rautenstrauch, 2015 .

Process simulation and experimental validation of Hot Metal Gas Forming with new press hardening steels

Dirk Landgrebe, André Albert, A. Paul, 2017 .

Integration of an Assessment Methodology for the Selection of Joining Technologies in Lightweight Engineering

Jerome Kaspar, Saphir A. Choudry, Dirk Landgrebe, 2018 .

Influence of Global Forced-air Warming on the Bulge Formation in Shallow Sloped SPIF Parts

Joost Duflou, Albert Van Bael, Hans Vanhove, 2017 .

Induction Heating Validation of Dieless Single-Point Incremental Forming of AHSS

Dirk Landgrebe, Verena Kräusel, V. Kräusel, 2017 .

Multifunctional thin film sensor system as monitoring system in production

Peter Scholz, Saskia Biehl, Dirk Landgrebe, 2016 .

Process development and tooling design for intrinsic hybrid composites

Dirk Landgrebe, Matthias Riemer, R. Müller, 2017 .

Energy-efficiency in a Hybrid Process of Sheet Metal Forming and Polymer Injection Moulding

Rafael Wertheim, Dirk Landgrebe, Anja Rautenstrauch, 2016 .

Hot single-point incremental forming assisted by induction heating

Dirk Landgrebe, Verena Kräusel, V. Kräusel, 2016 .

Prefinished Metal Polymer Hybrid Parts

Peter Scholz, Didier Garray, Dirk Landgrebe, 2018 .