Shuqiang Peng

发表

3D Printing Mechanically Robust and Transparent Polyurethane Elastomers for Stretchable Electronic Sensors.

Lixin Wu, Lixin Wu, Shuqiang Peng, 2020, ACS applied materials & interfaces.

Structure-Property Relationship of Stereolithography Resins Containing Polysiloxane Core-Shell Nanoparticles.

Lixin Wu, Shuqiang Peng, Yue-Wei Li, 2020, ACS applied materials & interfaces.

3D printing of sacrificial thermosetting mold for building near-infrared irradiation induced self-healable 3D smart structures

Shuqiang Peng, Longhui Zheng, J. Miao, 2022 .

Responsive Friction Modulation of 3D Printed Elastomeric Bioinspired Structures

Shuqiang Peng, Zixiang Weng, Zhi Yang, 2022, Tribology International.

The curing and degradation kinetics of modified epoxy–SiO2 composite

Shuqiang Peng, Mingfeng Chen, Canpei Liu, 2017, Journal of Thermal Analysis and Calorimetry.

Three-Dimensional Printing Fully Biobased Heat-Resistant Photoactive Acrylates from Aliphatic Biomass

Lixin Wu, Shuqiang Peng, Jie Zhong, 2020, ACS Sustainable Chemistry & Engineering.

Tailored and Highly Stretchable Sensor Prepared by Crosslinking an Enhanced 3D Printed UV‐Curable Sacrificial Mold

Lixin Wu, Shuqiang Peng, Zixiang Weng, 2020, Advanced Functional Materials.

High performance POSS filled nanocomposites prepared via UV-curing based on 3D stereolithography printing

Lixin Wu, Shuqiang Peng, Jie Zhong, 2019, Composites Part A: Applied Science and Manufacturing.

Theoretical Studies on the Properties of Acid Site in Isomorphously Substituted ZSM-5

Shuqiang Peng, S. Yuan, Yan-Guo Li, 2002 .

Mechanically robust 3D printed elastomeric lattices inspired by strong and tough hierarchical structures

Shuqiang Peng, Zixiang Weng, J. Gao, 2023, Additive Manufacturing.

Study on the interface toughening of particle/fibre reinforced epoxy composites with molecularly designed core-shell particles and various interface 3D models

Shuqiang Peng, Zixiang Weng, Naveen Thirunavukkarasu, 2022, Materials & Design.

UV-Curable, Low-Viscosity Resin with a High Silica Filler Content for Preparing Ultrastiff, 3D-Printed Molds

Shuqiang Peng, Zixiang Weng, Longhui Zheng, 2022, ACS Applied Polymer Materials.

Tailoring of Photocurable Ionogel toward High Resilience and Low Hysteresis 3D Printed Versatile Porous Flexible Sensor

Qiuquan Guo, Shuqiang Peng, Zixiang Weng, 2022, Chemical Engineering Journal.

Vat photopolymerization 3D printing of Transparent, mechanically Robust, and Self-Healing polyurethane elastomers for tailored wearable sensors

Xiangfang Peng, Shuqiang Peng, Zixiang Weng, 2023, Chemical Engineering Journal.

Construction of ultra-long service life self-cleaning slippery surface on superhydrophobicity functionalized by ATRP treatment

Shuqiang Peng, Zixiang Weng, Lixin Wu, 2021 .

Preparation of silver-plated carbon nanotubes/carbon fiber hybrid fibers by combining freeze-drying deposition with a sizing process to enhance the mechanical properties of carbon fiber composites

Lixin Wu, Shuqiang Peng, Longhui Zheng, 2021, Composites Part A: Applied Science and Manufacturing.

Study on the preparation of long-term stability core–shell particles/epoxy acrylate emulsion and toughening improvement for 3D printable UV-curable resin

Shuqiang Peng, Zixiang Weng, Xianmei Huang, 2023, Journal of Polymer Research.

High-Performance Cyanate Ester Resins with Interpenetration Networks for 3D Printing.

Lixin Wu, Shuqiang Peng, Jie Zhong, 2020, ACS applied materials & interfaces.

Study on the preparation of long-term stability core–shell particles/epoxy acrylate emulsion and toughening improvement for 3D printable UV-curable resin

Shuqiang Peng, Zixiang Weng, Xianmei Huang, 2023, Journal of Polymer Research.

Monte Carlo simulation of alkylation of toluene with alcohols over zeolite catalysts

Shuqiang Peng, Yazhou Li, Jiu-Rong Wang, 1995 .

Waterborne Polyurethane Acrylates Preparation towards 3D Printing for Sewage Treatment

Shuqiang Peng, Zixiang Weng, Zhi Yang, 2022, Materials.

Dynamic imine bonds based shape memory polymers with permanent shape reconfigurability for 4D printing.

Lixin Wu, Lixin Wu, Shuqiang Peng, 2019, ACS applied materials & interfaces.

Isotropic stereolithography resin toughened by core-shell particles

Lixin Wu, Shuqiang Peng, Jie Zhong, 2020 .

ESTRECAP___A GENERAL PROGRAM FOR COMPUTER-AIDED CATALYST PELLET DESIGN

Y. W. Li, Y.-H. Sun, Miao Cheng, 1993 .

Mechanical exfoliation assisted with carbon nanospheres to prepare a few-layer graphene for flexible strain sensor

Shuqiang Peng, Zixiang Weng, Longhui Zheng, 2022, Applied Surface Science.

Fluid-assisted one-step fabrication of fused deposition molding 3D printing parts with conductive networks and gradient functionalities

Shuqiang Peng, Jianlei Wang, Xu Zhang, 2023, Polymer.

3D printing of mechanically robust MXene-encapsulated polyurethane elastomer

Shi-Bin Wang, Shuqiang Peng, R. Kankala, 2022, Composites Part A: Applied Science and Manufacturing.

3D printing of ultra-high viscosity resin by a linear scan-based vat photopolymerization system

Shuqiang Peng, Zixiang Weng, Longhui Zheng, 2023, Nature communications.

3D Printing of High Viscosity UV‐Curable Resin for Highly Stretchable and Resilient Elastomer

D. Zhuo, Shuqiang Peng, Zixiang Weng, 2023, Advanced materials.

Durable washable wearable antibacterial thermoplastic polyurethane/carbon nanotube@silver nanoparticles electrospun membrane strain sensors by multi-conductive network

Xiangfang Peng, Zhenyu Yang, Shuqiang Peng, 2023, Advanced Composites and Hybrid Materials.