Yejin Jo

发表

Form‐Factor Free 3D Copper Circuits by Surface‐Conformal Direct Printing and Laser Writing

Su Yeon Lee, Sun-Kyung Kim, Sunho Jeong, 2020, Advanced Functional Materials.

Colored and semitransparent silver nanoparticle layers deposited by spin coating of silver nanoink

Seung-Yun Lee, Sunho Jeong, Yejin Jo, 2018 .

High-Power Aqueous Zinc-Ion Batteries for Customized Electronic Devices.

Il-Doo Kim, Chanhoon Kim, Youngmin Choi, 2018, ACS nano.

Extremely Low-Cost, Scalable Oxide Semiconductors Employing Poly(acrylic acid)-Decorated Carbon Nanotubes for Thin-Film Transistor Applications.

K. Chung, Sunho Jeong, Yejin Jo, 2016, ACS applied materials & interfaces.

Viscoelastic properties of a 3D-Printable high-dielectric paste with surface-modified BaTiO3

Sunho Jeong, Yejin Jo, Y. Kang, 2018 .

Highly durable Cu-based electrodes from a printable nanoparticle mixture ink: flash-light-sintered, kinetically-controlled microstructure.

Su Yeon Lee, Sunho Jeong, Yejin Jo, 2018, Nanoscale.

Piezoelectric Properties of 0.94(Na 0.5 K 0.5 )NbO 3 -0.06(Sr 0.5 Ca 0.5 )TiO 3 with 0.1 MnO 2 Addition at Varying Sintering Temperatures

Minho Kim, Yejin Jo, Sung-Gap Lee, 2014 .

Thermally-derived liquid phase involving multiphase Cu(In,Ga)Se2 nanoparticles for solution-processed inorganic photovoltaic devices

K. Yoon, Sunho Jeong, Yejin Jo, 2014 .

Facile microwave-assisted synthesis of multiphase CuInSe2 nanoparticles and the role of secondary CuSe phase on photovoltaic device performance

K. Yoon, Sunho Jeong, Yejin Jo, 2013, 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC).

Ambient atmosphere-processable, printable Cu electrodes for flexible device applications: structural welding on a millisecond timescale of surface oxide-free Cu nanoparticles.

Jin-seong Park, S. Cho, Sunho Jeong, 2015, Nanoscale.

Effects of Poly(Styrene-Co-Maleic acid) as Adhesion Promoter on Rheology of Aqueous Cu Nanoparticle Ink and Adhesion of Printed Cu Pattern on Polyimid Film

Sunho Jeong, Yejin Jo, Youngmin Choi, 2015 .

Three-dimensionally printed pressure sensor arrays from hysteresis-less stretchable piezoresistive composites

Su Yeon Lee, Sungmook Jung, Sunho Jeong, 2019, RSC advances.

AAO Template Morphology Controlled by Variation of Anodizing Condition

Yejin Jo, Sung-Gap Lee, Kyeong-Min Kim, 2015 .

Fabrication and Characterization of AAO Template with Variation of the Phosphoric Acid Amount of the Etching Solution

Yejin Jo, Sung-Gap Lee, Young-Gon Kim, 2014 .

3D intra-stacked CoO/carbon nanocomposites welded by Ag nanoparticles for high-capacity, reversible lithium storage.

Sunho Jeong, Yejin Jo, S. Lee, 2015, Nanoscale.

Printable Thick Copper Conductors from Optically Modulated Multidimensional Particle Mixtures.

Su Yeon Lee, Sunho Jeong, Yejin Jo, 2019, ACS applied materials & interfaces.

Lubricant skin on diverse biomaterials with complex shapes via polydopamine-mediated surface functionalization for biomedical applications.

Jungmok Seo, Yejin Jo, Yeontaek Lee, 2022, Bioactive materials.

3D-printable, highly conductive hybrid composites employing chemically-reinforced, complex dimensional fillers and thermoplastic triblock copolymers.

Jang-Ung Park, Ju Young Kim, Kwang-Suk Jang, 2017, Nanoscale.

Newly Designed Cu/Cu10Sn3 Core/Shell Nanoparticles for Liquid Phase-Photonic Sintered Copper Electrodes: Large-Area, Low-Cost Transparent Flexible Electronics

Jang‐Ung Park, Kukjoo Kim, Sunho Jeong, 2016 .

Printable Self-Activated Liquid Metal Stretchable Conductors from Polyvinylpyrrolidone-Functionalized Eutectic Gallium Indium Composites.

Sunho Jeong, Yejin Jo, S. Lee, 2022, ACS applied materials & interfaces.

Three-Dimensional Multistack-Printed, Self-Powered Flexible Pressure Sensor Arrays: Piezoelectric Composites with Chemically Anchored Heterogeneous Interfaces

Su Yeon Lee, Sungmook Jung, Sunho Jeong, 2020, ACS omega.

High-performance solution-processable flexible and transparent conducting electrodes with embedded Cu mesh

Sang Seok Lee, Shin‐Hyun Kim, Su Yeon Lee, 2018 .

3D-printed origami electronics using percolative conductors

Young-Min Choi, Jeong-O Lee, Sunho Jeong, 2018, RSC advances.

Extremely flexible, printable Ag conductive features on PET and paper substrates via continuous millisecond photonic sintering in a large area

Sunho Jeong, Yejin Jo, S. Lee, 2014 .

Unraveling the Issue of Ag Migration in Printable Source/Drain Electrodes Compatible with Versatile Solution-Processed Oxide Semiconductors for Printed Thin-Film Transistor Applications.

K. Chung, Sunho Jeong, J. ·. Kim, 2017, ACS applied materials & interfaces.

Crystalline structure-tunable, surface oxidation-suppressed Ni nanoparticles: printable magnetic colloidal fluids for flexible electronics

D. Yoon, Sunho Jeong, Yejin Jo, 2015 .

Development of Highly Conductive Cu Conductors Using Cu Nanoparticle/Flake Inks and Instantaneous Laser Sintering Process

Sunho Jeong, Yejin Jo, 2022, Journal of Flexible and Printed Electronics.

One-pot synthesis of surface oxidation-suppressed multidimensional copper particles for photonically sintered, directly printed conductive features

Su Yeon Lee, Sunho Jeong, Yejin Jo, 2021 .

Chemically Driven, Water-Soluble Composites of Carbon Nanotubes and Silver Nanoparticles as Stretchable Conductors.

Changsik Song, Moon-Ho Ham, Sungho Choi, 2015, ACS macro letters.

3D polymer objects with electronic components interconnected via conformally printed electrodes.

Youngmin Choi, J. Lewis, B. Y. Ahn, 2017, Nanoscale.

Site‐Selective Multi‐Stacked Assembly of Silver Nanoparticles on Amine‐Functionalized Printed Patterns: Comparative Studies on the Role of Electrostatic Interaction and Meniscus

Sunho Jeong, Yejin Jo, Youngmin Choi, 2015 .

All-3D-printed solid-state microsupercapacitors

Sunho Jeong, Yejin Jo, S. Lee, 2021 .

Synthesis of disc-shaped copper flakes by mechanical milling: Green laser-sintered, highly conductive printed Cu features

Sunho Jeong, Yejin Jo, H. Park, 2021 .

Study on thermal evolution of the CuSe phase in nanoparticle-based absorber layers for solution-processed chalcopyrite photovoltaic devices.

Sunho Jeong, Yejin Jo, Youngmin Choi, 2013, ACS applied materials & interfaces.

Characteristics of Lanthanum Silicates Electrolyte for Solid Oxide Fuel Cells

Yejin Jo, Sung-Gap Lee, Dong-Jin Lee, 2015 .

Polymeric mold soft-patterned metal oxide field-effect transistors: critical factors determining device performance

S. Nahm, Sunho Jeong, Yejin Jo, 2014 .

Three-Dimensionally Printed Stretchable Conductors from Surfactant-Mediated Composite Pastes.

Su Yeon Lee, Sungmook Jung, Sunho Jeong, 2019, ACS applied materials & interfaces.

3D-stacked carbon composites employing networked electrical intra-pathways for direct-printable, extremely stretchable conductors.

Sunho Jeong, Yejin Jo, S. Lee, 2015, ACS applied materials & interfaces.

Air-stable, surface-oxide free Cu nanoparticles for highly conductive Cu ink and their application to printed graphene transistors

Jang‐Ung Park, Sunho Jeong, Yejin Jo, 2013 .

A Surface Conformal Laser‐Assisted Alloying Reaction for 3D‐Printable Solid/Liquid Biphasic Conductors

Su Yeon Lee, Sun-Kyung Kim, Sunho Jeong, 2023, Small Science.

Haze-free transparent electrodes using metal nanofibers with carbon shells for high-temperature stability

Jang‐Ung Park, Sangyoon Ji, Jihun Park, 2019, Applied Surface Science.

3D printing of mechanically tough and self-healing hydrogels with carbon nanotube fillers

Seung‐Woo Cho, Jungmok Seo, Yejin Jo, 2023, International journal of bioprinting.

High-Power Aqueous Zinc-Ion Batteries for Customized Electronic Devices.

J. Lewis, B. Y. Ahn, T. Wei, 2018, ACS nano.

3D polymer objects with electronic components interconnected via conformally printed electrodes.

J. Lewis, B. Y. Ahn, Sungmook Jung, 2017, Nanoscale.