J. Liang

发表

Electrohydrodynamic jet 3D printing of PCL/PVP composite scaffold for cell culture.

Kai Li, Dazhi Wang, Kuipeng Zhao, 2020, Talanta.

Instrument for fine control of drop-on-demand electrohydrodynamic jet printing by current measurement.

M. Madou, S. Martínez-Chapa, Kai Li, 2019, The Review of scientific instruments.

Thermally Assisted Electrohydrodynamic Jet High‐Resolution Printing of High‐Molecular Weight Biopolymer 3D Structures

Kai Li, Dazhi Wang, Kedong Song, 2018, Macromolecular Materials and Engineering.

Electrospun fibrous electrodes with tunable microstructure made of polyaniline/multi-walled carbon nanotube suspension for all-solid-state supercapacitors

Dazhi Wang, J. Liang, Shijie Su, 2016 .

A self-pumping and self-breathing micro direct methanol fuel cell with polymer bipolar plates

T. Cui, J. Liang, Lingjun Sun, 2011 .

Effects of Anode Flow Field Design on CO2 Bubble Behavior in μDMFC

G. Sun, J. Liang, Chong Liu, 2009, Sensors.

Effects of the initial stencil width on stainless steel wet chemical etching: combined model and experimental investigations

Chong Liu, J. Liang, Lingjun Sun, 2009 .

Patterning of graphene microscale structures using electrohydrodynamic atomisation deposition of photoresist moulds

Dazhi Wang, J. Liang, Xufeng Zhou, 2014 .

Fabrication of micro/nano-structures by electrohydrodynamic jet technique

Dazhi Wang, J. Liang, T. Ren, 2017 .

Numerical modeling and analysis of coaxial electrohydrodynamic jet printing

Dazhi Wang, Kuipeng Zhao, J. Liang, 2022, Scientific Reports.

The Focused Electrode Ring for Electrohydrodynamic Jet and Printing on Insulated Substrate

Dazhi Wang, Kuipeng Zhao, J. Liang, 2022, International Journal of Precision Engineering and Manufacturing.

Microtip focused electrohydrodynamic jet printing with nanoscale resolution.

Dazhi Wang, J. Liang, Shijie Su, 2020, Nanoscale.

Effect of Nitrogen-Doped Concentration on the TCR of ITO Thin Films at High Temperature

Jun Xu, J. Liang, Jian Li, 2021, 2021 IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS).

Numerical simulation of stable electrohydrodynamic cone-jet formation and printing on flexible substrate

Dazhi Wang, Kuipeng Zhao, J. Liang, 2021 .

A new water management system for air-breathing direct methanol fuel cell using superhydrophilic capillary network and evaporation wings

J. Liang, Shijie Su, Dezhen Wang, 2021 .

A Silicon Micro Direct Methanol Fuel Cell Demonstrator Using Microfabrication Techniques

J. Liang, Lingjun Sun, Chong Liu, 2009 .

In Situ Visual Investigation of CO2 Bubbles Clogging Phenomena in μDMFC Anode Micro Flow Field

J. Liang, Chong Liu, Liding Wang, 2006, 2006 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Investigation of the effects of compression pressure on direct methanol fuel cell

J. Liang, Chong Liu, Liding Wang, 2011 .

Formation of an integrated catalyst-coated membrane using electrohydrodynamic atomization Layer-by-Layer deposition for direct methanol fuel cells

Suli Wang, G. Sun, Dazhi Wang, 2013 .

Simulation of Cone-Jet and Micro-Drip Regimes and Printing of Micro-Scale Patterns on PET Substrate

J. Xie, Dazhi Wang, Kuipeng Zhao, 2022, Polymers.

Numerical simulation of electrohydrodynamic jet and printing micro-structures on flexible substrate

Dazhi Wang, Kuipeng Zhao, J. Liang, 2020, Microsystem Technologies.

Fabrication of Crack-Free Barium Titanate Thin Film with High Dielectric Constant Using Sub-Micrometric Scale Layer-by-Layer E-Jet Deposition

Dazhi Wang, J. Liang, Xu Fang, 2016, Materials.

Effects of Imidization Process on the Electric Breakdown Strength of Polyimide Thin Film

J. Liang, T. Ren, Xu Fang, 2017 .

Fabrication of piezoelectric thick-film stator using electrohydrodynamic jet printing for micro rotary ultrasonic motors

W. Xu, Dazhi Wang, Kuipeng Zhao, 2020 .

High Performance Electrodes for All-Solid-State Supercapacitor Prepared by Using E-Jet Deposition Technique

J. Liang, T. Ren, Shuang Xu, 2017 .

Facile fabrication of superhydrophilic/superhydrophobic surface on titanium substrate by single-step anodization and fluorination

J. Liang, Shijie Su, Shuangchao Xu, 2015 .

Preparation of stable superhydrophobic film on stainless steel substrate by a combined approach using electrodeposition and fluorinated modification

J. Liang, Dezhen Wang, Li Chen, 2014 .

Effect of nitrogen partial pressure on the piezoresistivity of magnetron sputtered ITO thin films at high temperatures

J. Liang, Zhichun Liu, Wenqi Lu, 2023, Applied Surface Science.

Large area polymer semiconductor sub-microwire arrays by coaxial focused electrohydrodynamic jet printing for high-performance OFETs

Dazhi Wang, Kuipeng Zhao, J. Liang, 2022, Nature Communications.

Electrohydrodynamic atomization deposition and patterning of a carbon nano-suspension

Dazhi Wang, J. Liang, Jingliang Li, 2011 .

Electrohydrodynamic Atomization Deposition of Fuel Cell Catalyst-Coated Membrane with Structure and Material Gradient Variation

Yi Luo, J. Liang, T. Ren, 2015 .

Enhance performance of micro direct methanol fuel cell by in situ CO 2 removal using novel anode flow field with superhydrophobic degassing channels

J. Liang, Ying Luo, Dezhen Wang, 2017 .

Novel Flow Field with Superhydrophobic Gas Channels Prepared by One-step Solvent-induced Crystallization for Micro Direct Methanol Fuel Cell

Dazhi Wang, J. Liang, T. Ren, 2015 .

Fabrication of micro/nano-structures by electrohydrodynamic jet technique

Dazhi Wang, J. Liang, T. Ren, 2017, Frontiers of Mechanical Engineering.

Thermally Assisted Electrohydrodynamic Jet High‐Resolution Printing of High‐Molecular Weight Biopolymer 3D Structures

Dazhi Wang, Kedong Song, J. Liang, 2018, Macromolecular Materials and Engineering.