J. Mackenzie

发表

Monolithic 3D printing of embeddable and highly stretchable strain sensors using conductive ionogels

Robert M Sweet, R. Sweet, Michael R. Crump, 2019, Nanotechnology.

The origin of the open-circuit voltage in polyfluorene-based photovoltaic devices

Richard H. Friend, Neil C. Greenham, Ana Claudia Arias, 2002 .

Self-organized discotic liquid crystals for high-efficiency organic photovoltaics.

R. Friend, L. Schmidt‐Mende, K. Müllen, 2001, Science.

Open-Circuit Voltage Characteristics in Polyfluorene Based Photovoltaic Devices

R. Friend, A. Arias, N. Greenham, 2002 .

Materials and applications for large area electronics: solution-based approaches.

A. Arias, A. Salleo, J. Mackenzie, 2010, Chemical reviews.

Wet chemical etching of AlN

S. Pearton, C. Abernathy, J. Mackenzie, 1995 .

Vertically segregated polymer-blend photovoltaic thin-film structures through surface-mediated solution processing

Richard H. Friend, Ana Claudia Arias, Wilhelm T. S. Huck, 2002 .

Dry etch damage in InN, InGaN, and InAlN

R. J. Shul, Stephen J. Pearton, C. R. Abernathy, 1995 .

CCl4 doping of GaN grown by metalorganic molecular beam epitaxy

S. J. Pearton, W. S. Hobson, C. R. Abernathy, 1995 .

Implant isolation of InxAl1−xN and InxGa1−xN

J. Zolper, S. Pearton, C. Abernathy, 1995 .

Unintentional hydrogenation of GaN and related alloys during processing

F. Ren, S. Pearton, J. Lee, 1996 .

Wet chemical etching of AlN and InAlN in KOH solutions

John C. Zolper, R. J. Shul, Stephen J. Pearton, 1996 .

Etching processes for fabrication of GaN/InGaN/AlN microdisk laser structures

J. Zolper, S. Pearton, J. Lee, 1996 .

ICl/Ar electron cyclotron resonance plasma etching of III–V nitrides

S. Pearton, C. Abernathy, C. Vartuli, 1996 .

Cl2/Ar and CH4/H2/Ar dry etching of III–V nitrides

S. Pearton, J. Lee, C. Abernathy, 1996 .

Plasma etching of III-nitrides in ICl/Ar and IBr/Ar plasmas

S. Pearton, J. Lee, C. Abernathy, 1997 .

Effect of dry etching on surface properties of III-nitrides

R. F. Karlicek, F. Ren, S. Pearton, 1997 .

Electron cyclotron resonance etching of III-V nitrides in IBr/Ar plasmas

S. Pearton, J. Lee, C. Abernathy, 1997 .

Inductively coupled plasma etching of III-V nitrides in CH{sub 4}/H{sub 2}/Ar and CH{sub 4}/H{sub 2}/N{sub 2} chemistries

S. Pearton, J. Lee, C. Abernathy, 1997 .

Low bias dry etching of III-nitrides in Cl2-based inductively coupled plasmas

S. Pearton, C. Abernathy, C. Vartuli, 1998 .

Selective inductively coupled plasma etching of group-III nitrides in Cl2- and BCl3-based plasmas

Luke F. Lester, R. J. Shul, Stephen J. Pearton, 1998 .

Potential Application of Bi(Pb)-Ca-Sr-Cu-O Glasses for Preparation of Integrated Optical Fibers

J. Mackenzie, Haixing Zheng, 1989 .

Attaching perylene dyes to polyfluorene: three simple, efficient methods for facile color tuning of light-emitting polymers.

R. Friend, K. Müllen, J. Mackenzie, 2003, Journal of the American Chemical Society.

Multifunctional Ceramic Materials–Review and Projections

J. Mackenzie, J. MacKenzie, 1989 .

Incorporation and Optical Activation of Er in Group III-N Materials Grown by Metalorganic Molecular Beam Epitaxy

F. Ren, S. Pearton, C. Abernathy, 1997 .

Direct and indirect excitation of Er3+ ions in Er: AIN

C. R. Abernathy, S. Pearton, J. Zavada, 1997 .

Fluorescence scanning near‐field optical microscopy of polyfluorene composites

R. Friend, M. Blamire, A. Arias, 2001, Journal of microscopy.

Increased efficiency in vertically segregated thin-film conjugated polymer blends for light-emitting diodes

R. Friend, A. Arias, J. Mackenzie, 2003 .

Glass and ceramics from lunar materials

J. Mackenzie, R. Claridge, 1979 .

High-density plasma etch selectivity for the III–V nitrides

C. G. Willison, S. Pearton, J. Lee, 1998 .

Comparison of the Optical Properties of Er3+ Doped Gallium Nitride Prepared by Metalorganic Molecular Beam Epitaxy (Mombe) and Solid Source Molecular Beam Epitaxy (SSMBE)

A. Steckl, J. Zavada, C. Abernathy, 2000 .

Comparison of the optical properties of Er{sup 3+} doped gallium nitride prepared by metalorganic molecular beam epitaxy (MOMBE) and solid source molecular beam epitaxy (SSMBE)

A. Steckl, J. Zavada, C. Abernathy, 1999 .