C. He

发表

Data-driven analysis on thermal effects and temperature changes of lithium-ion battery

N. Zhao, Shan Zhu, C. He, 2021, Journal of Power Sources.

A large ultrathin anatase TiO2 nanosheet/reduced graphene oxide composite with enhanced lithium storage capability

C. Shi, N. Zhao, C. He, 2014 .

Effect of amorphous FePO4 coating on structure and electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 as cathode material for Li-ion batteries

Jiajun Li, Naiqin Zhao, Chunnian He, 2013 .

Assembly Multifunctional Three-Dimensional Carbon Networks by Controlling Intermolecular Forces.

C. Shi, N. Zhao, Shan Zhu, 2018, ACS applied materials & interfaces.

In-situ space-confined catalysis for fabricating 3D mesoporous graphene and their capacitive properties

C. Shi, N. Zhao, Shan Zhu, 2018 .

Soluble salt self-assembly-assisted synthesis of three-dimensional hierarchical porous carbon networks for supercapacitors

C. Shi, N. Zhao, Shan Zhu, 2015 .

A novel synthesis of CNTs/TiO2 nanocomposites with enhanced performance as photoanode of solar cell

C. Shi, N. Zhao, C. He, 2013 .

Synthesis of SiO2/3D porous carbon composite as anode material with enhanced lithium storage performance

C. Shi, N. Zhao, C. He, 2016 .

Thermal decomposition-reduced layer-by-layer nitrogen-doped graphene/MoS2/nitrogen-doped graphene heterostructure for promising lithium-ion batteries

C. Shi, N. Zhao, C. He, 2017 .

Artificial neural network enabled capacitance prediction for carbon-based supercapacitors

C. Shi, N. Zhao, Shan Zhu, 2018, Materials Letters.

Fabrication of Nanocarbon Composites Using In Situ Chemical Vapor Deposition and Their Applications

C. Shi, N. Zhao, C. He, 2015, Advanced materials.

Low temperature fabrication of hollow carbon nanospheres over Ni/Al2O3 by the catalytic method

C. Shi, N. Zhao, C. He, 2008 .

Physical activation and characterization of multi-walled carbon nanotubes catalytically synthesized from methane

Yongdan Li, N. Zhao, C. He, 2007 .

Effect of Interfacial Lithium Insertion on the Stability and Electronic Structure of Graphene/LiFePO4

C. Shi, N. Zhao, C. He, 2017 .

Effectively reinforced load transfer and fracture elongation by forming Al4C3 for in-situ synthesizing carbon nanotube reinforced Al matrix composites

C. Shi, N. Zhao, C. He, 2018 .

Effect of carbon nanotube (CNT) content on the properties of in-situ synthesis CNT reinforced Al composites

Tianchun Zou, C. Shi, N. Zhao, 2016 .

Synergistic effect of CNTs reinforcement and precipitation hardening in in-situ CNTs/Al–Cu composites

C. Shi, N. Zhao, C. He, 2015 .

Fabrication of carbon nanotube reinforced Al composites with well-balanced strength and ductility

K. Kondoh, C. Shi, N. Zhao, 2013 .

Mechanical properties and interfacial analysis of aluminum matrix composites reinforced by carbon nanotubes with diverse structures

N. Zhao, C. He, Haipeng Li, 2013 .

Synthesis of uniformly dispersed carbon nanotube reinforcement in Al powder for preparing reinforced Al composites

C. Shi, N. Zhao, C. He, 2011 .

Rational design of Co9S8/CoO heterostructures with well-defined interfaces for lithium sulfur batteries: A study of synergistic adsorption-electrocatalysis function

C. Shi, N. Zhao, C. He, 2019, Nano Energy.

Balancing Strength and Ductility in Al Matrix Composites Reinforced by Few-Layered MoS2 through In-Situ Formation of Interfacial Al12Mo

C. Shi, N. Zhao, C. He, 2021, Materials.

1D Sub‐Nanotubes with Anatase/Bronze TiO2 Nanocrystal Wall for High‐Rate and Long‐Life Sodium‐Ion Batteries

Fangxi Xie, N. Zhao, C. He, 2018, Advanced materials.

Characterization and magnetic property of carbon coated metal nanoparticles and hollow carbon onions fabricated by CVD of methane

C. J. Liu, C. He, F. Tian, 2008 .

Carbon nanotubes and onions from methane decomposition using Ni/Al catalysts

Xi‐Wen Du, C. Shi, N. Zhao, 2006 .

A practical method for the production of hollow carbon onion particles

Xi‐Wen Du, C. Shi, N. Zhao, 2006 .

Three-dimensionally hierarchical Co3O4/Carbon composites with high pseudocapacitance contribution for enhancing lithium storage

C. Shi, N. Zhao, Shan Zhu, 2018, Electrochimica Acta.

Hierarchical porous carbon with graphitic structure synthesized by a water soluble template method

Xi‐Wen Du, C. Shi, N. Zhao, 2012 .

Preparation of 3YSZ/Cu composite by in-situ chemical route

Xi‐Wen Du, C. Shi, N. Zhao, 2007 .

Fabrication of in-situ grown graphene reinforced Cu matrix composites

X. Zhang, C. Shi, N. Zhao, 2016, Scientific Reports.

One-step solid-phase synthesis of ultrasmall homogeneous face-centered tetragonal FePt nanoparticles encapsulated in thin carbon shells

N. Zhao, C. He, 2012 .

Synthesis of hollow carbon nano-onions and their use for electrochemical hydrogen storage

Robert H. Hauge, Chenguang Zhang, Jiajun Li, 2012 .

Self-anchored catalysts for substrate-free synthesis of metal-encapsulated carbon nano-onions and study of their magnetic properties

C. Shi, N. Zhao, C. He, 2016, Nano Research.

Effect of Ni, Fe and Fe-Ni alloy catalysts on the synthesis of metal contained carbon nano-onions and studies of their electrochemical hydrogen storage properties

C. Shi, N. Zhao, C. He, 2014 .

Free‐Standing 3D Nanoporous Duct‐Like and Hierarchical Nanoporous Graphene Films for Micron‐Level Flexible Solid‐State Asymmetric Supercapacitors

C. Shi, N. Zhao, C. He, 2016 .

Electrochemical hydrogen storage of expanded graphite decorated with TiO2 nanoparticles

C. Shi, N. Zhao, C. He, 2012 .

Microstructural characteristic and mechanical properties of the in-situ MgAl2O4 reinforced Al matrix composite based on Al-Mg-ZnO system

N. Zhao, C. He, Dongdong Zhao, 2022, Journal of Alloys and Compounds.

In-situ synthesis of CNTs@Al2O3 wrapped structure in aluminum matrix composites with balanced strength and toughness

C. Shi, N. Zhao, C. He, 2020 .

In-situ synthesis of MgAlB4 whiskers as a promising reinforcement for aluminum matrix composites

C. Shi, N. Zhao, C. He, 2019, Materials Science and Engineering: A.

Carbon-coated Ni3Sn2 nanoparticles embedded in porous carbon nanosheets as a lithium ion battery anode with outstanding cycling stability

X. Zhang, C. Shi, N. Zhao, 2014 .

Metal–organic frameworks-derived honeycomb-like Co3O4/three-dimensional graphene networks/Ni foam hybrid as a binder-free electrode for supercapacitors

C. Shi, N. Zhao, Shan Zhu, 2017 .

Effect of Hydrogen Molecule Dissociation on Hydrogen Storage Capacity of Graphene with Metal Atom Decorated

C. Shi, N. Zhao, C. He, 2014 .

Linear carbon allotrope – carbon atom wires prepared by pyrolysis of starch

C. He, Li-jun Wu, Yimei Zhu, 2004 .

A novel method for synthesizing ultralight silver foams by the silver mirror reaction

B. Jiang, C. Shi, N. Zhao, 2016 .

In situ synthesis of ultrathin 2-D TiO2 with high energy facets on graphene oxide for enhancing photocatalytic activity

Jiajun Li, Sha Junwei, Naiqin Zhao, 2014 .

Anomalous interfacial lithium storage in graphene/TiO2 for lithium ion batteries.

C. Shi, N. Zhao, C. He, 2014, ACS applied materials & interfaces.

In-situ space-confined synthesis of well-dispersed three-dimensional graphene/carbon nanotube hybrid reinforced copper nanocomposites with balanced strength and ductility

X. Zhang, C. Shi, N. Zhao, 2017 .

Fabrication of Er/Tm/Yb/Y2O3 upconversion luminescence enhanced 3C-SiC composites as highly UV–Vis–NIR light responsive photocatalysts

C. Shi, N. Zhao, C. He, 2018 .

TEM studies of the initial stage growth and morphologies of bamboo-shaped carbon nanotubes synthesized by CVD

Xi‐Wen Du, C. Shi, N. Zhao, 2007 .

Constructing N-Doped porous carbon confined FeSb alloy nanocomposite with Fe-N-C coordination as a universal anode for advanced Na/K-ion batteries

C. Shi, N. Zhao, C. He, 2020 .

Graphene networks anchored with sn@graphene as lithium ion battery anode.

C. Shi, N. Zhao, C. He, 2014, ACS nano.

One-step synthesis of SnCo nanoconfined in hierarchical carbon nanostructures for lithium ion battery anode.

X. Zhang, C. Shi, N. Zhao, 2017, Nanoscale.

Bi-functional modular graphene network with high rate and cycling performance

C. Shi, N. Zhao, C. He, 2021 .

Doping and controllable pore size enhanced electrochemical performance of free-standing 3D graphene films

C. Shi, N. Zhao, C. He, 2018 .

Comprehensive performance regulation of Cu matrix composites with graphene nanoplatelets in situ encapsulated Al2O3 nanoparticles as reinforcement

C. Shi, N. Zhao, C. He, 2021, Carbon.

Fabrication of Graphene Nanoplates Modified with Nickel Nanoparticles for Reinforcing Copper Matrix Composites

N. Zhao, C. He, Jiajun Li, 2020, Acta Metallurgica Sinica (English Letters).

Synergistic effect of Cu on laminated graphene nanosheets/AlCu composites with enhanced mechanical properties

N. Zhao, C. He, Junwei Sha, 2019, Materials Science and Engineering: A.

Si-Assisted Solidification Path and Microstructure Control of 7075 Aluminum Alloy with Improved Mechanical Properties by Selective Laser Melting

Jianglin Lan, N. Zhao, C. He, 2022, Acta Metallurgica Sinica (English Letters).

Processing and mechanical properties of carbon nanotube–alumina hybrid reinforced high density polyethylene composites

C. He, F. Tian, 2011 .

Amorphous carbon nanotubes fabricated by low-temperature chemical vapor deposition

Xi‐Wen Du, C. Shi, N. Zhao, 2006 .

NaCl Pinning Induced Ultrafine Sn Nanoparticles Anchored on Three-Dimensional Porous Carbon for Na Storage

N. Zhao, C. He, Ming Liang, 2022, ACS Applied Energy Materials.

Carbon onion growth enhanced by nitrogen incorporation

Xi‐Wen Du, C. Shi, N. Zhao, 2006 .

Monodisperse multicore-shell SnSb@SnOx/SbOx@C nanoparticles space-confined in 3D porous carbon networks as high-performance anode for Li-ion and Na-ion batteries

C. Shi, N. Zhao, C. He, 2019, Chemical Engineering Journal.

Performance improvement of dye-sensitized solar cells using room-temperature-synthesized hierarchical TiO2 honeycomb nanostructures.

C. Shi, N. Zhao, C. He, 2013, ACS applied materials & interfaces.

Octopus-Inspired Design of Apical NiS2 Nanoparticles Supported on Hierarchical Carbon Composites as an Efficient Host for Lithium Sulfur Batteries with High Sulfur Loading.

Rui Zhang, C. Shi, N. Zhao, 2020, ACS applied materials & interfaces.

Synthesis of binary and triple carbon nanotubes over Ni/Cu/Al2O3 catalyst by chemical vapor deposition

Xi‐Wen Du, C. Shi, N. Zhao, 2007 .

TiO2 cellular-protected nanowire array fabricated super-rapidly by the precipitation of colloids in the nanopores

C. Shi, N. Zhao, C. He, 2012 .

Effect of SiC nanoparticles on the precipitation behavior and mechanical properties of 7075Al alloy

Xiaofeng Chen, N. Zhao, C. He, 2020, Journal of Materials Science.

A Chemical-Adsorption Strategy to Enhance the Reaction Kinetics of Lithium-Rich Layered Cathodes via Double-Shell Surface Modification.

C. Shi, N. Zhao, C. He, 2016, ACS applied materials & interfaces.

Surface double phase network modified lithium rich layered oxides with improved rate capability for Li-ion batteries.

C. Shi, N. Zhao, C. He, 2015, ACS applied materials & interfaces.

Fabrication and growth mechanism of Ni-filled carbon nanotubes by the catalytic method

C. Shi, N. Zhao, C. He, 2008 .

Ball-in-cage nanocomposites of metal-organic frameworks and three-dimensional carbon networks: synthesis and capacitive performance.

C. Shi, N. Zhao, Shan Zhu, 2017, Nanoscale.

Bio-inspired three-dimensional carbon network with enhanced mass-transfer ability for supercapacitors

C. Shi, N. Zhao, Shan Zhu, 2019, Carbon.

A Top‐Down Strategy toward SnSb In‐Plane Nanoconfined 3D N‐Doped Porous Graphene Composite Microspheres for High Performance Na‐Ion Battery Anode

Tianshuai Wang, C. Shi, N. Zhao, 2018, Advanced materials.

High-Valent Nickel Promoted by Atomically Embedded Copper for Efficient Water Oxidation

Xuhui Sun, Yongchang Liu, Hongyan Liang, 2020 .

Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network.

X. Zhang, C. Shi, N. Zhao, 2017, Nanoscale.

Preparation of reduced graphene oxide/Fe3O4 nanocomposite and its microwave electromagnetic properties

C. Shi, N. Zhao, C. He, 2013 .

Adsorption of hydrogen atoms on graphene with TiO2 decoration

C. Shi, N. Zhao, C. He, 2013 .

Ultrafine Fe3N nanocrystals coupled with N doped 3D porous carbon networks induced atomically dispersed Fe for superior sodium ion storage

C. Shi, N. Zhao, C. He, 2022, Carbon.

One-step in-situ synthesis of Sn-nanoconfined Ti3C2Tx MXene composites for Li-ion battery anode

N. Zhao, Shan Zhu, C. He, 2022, Electrochimica Acta.

A carbon nanotube/alumina network structure for fabricating alumina matrix composites

S. J. Liu, C. He, F. Tian, 2009 .

Phase Component-controllable Synthesis of Layered-Spinel Composite Materials as High-Performance Cathode for Lithium-ion Battery

Hui Cao, C. Shi, N. Zhao, 2016 .

NaCl-pinned antimony nanoparticles combined with ion-shuttle-induced graphitized 3D carbon to boost sodium storage

C. Sow, C. Shi, N. Zhao, 2022, Cell Reports Physical Science.

Metal-oxygen bonding nanoarchitectonics for regulation of oxygen evolution reaction performance in FeNi-codoped CoOOH

C. Shi, N. Zhao, C. He, 2022, International Journal of Hydrogen Energy.

Interface intrinsic strengthening mechanism on the tensile properties of Al2O3/Al composites

C. Shi, N. Zhao, C. He, 2019, Computational Materials Science.

Understanding the Electrochemical Properties of Li-Rich Cathode Materials from First-Principles Calculations

C. Shi, N. Zhao, C. He, 2015 .

Damping characteristics of Al matrix composite foams reinforced by in-situ grown carbon nanotubes

C. Shi, N. Zhao, C. He, 2017 .

Fabrication of Sn-core/CNT-shell nanocable anchored interconnected carbon networks as anode material for lithium ion batteries

C. Shi, N. Zhao, C. He, 2018 .

Scalable synthesis of high-quality transition metal dichalcogenide nanosheets and their application as sodium-ion battery anodes

C. Shi, N. Zhao, C. He, 2016 .

Unraveling the mechanism of ligands regulating electronic structure of MN4 sites with optimized ORR catalytic performance

C. Shi, N. Zhao, C. He, 2022, Applied Surface Science.

Compression fatigue properties of open-cell aluminum foams fabricated by space-holder method

Tianchun Zou, N. Zhao, C. He, 2019, International Journal of Fatigue.

High strain rate dynamic compressive properties and deformation behavior of Al matrix composite foams reinforced by in-situ grown carbon nanotubes

C. Shi, N. Zhao, C. He, 2017, Materials Science and Engineering: A.

Microstructural evolution and mechanical behavior of in situ synthesized MgAl2O4 whiskers reinforced 6061 Al alloy composite after hot extrusion and annealing

C. Shi, N. Zhao, C. He, 2018, Rare Metals.

Facile synthesis and electrochemical properties of continuous porous spheres assembled from defect-rich, interlayer-expanded, and few-layered MoS2/C nanosheets for reversible lithium storage

C. Shi, N. Zhao, C. He, 2018 .

CeO x-Decorated NiFe-Layered Double Hydroxide for Efficient Alkaline Hydrogen Evolution by Oxygen Vacancy Engineering.

C. Shi, N. Zhao, Ping Zhang, 2018, ACS applied materials & interfaces.

Salt-assisted synthesis of 3D open porous g-C3N4 decorated with cyano groups for photocatalytic hydrogen evolution.

C. Shi, N. Zhao, C. He, 2018, Nanoscale.

Fabrication and growth mechanism of carbon nanospheres by chemical vapor deposition

C. He, F. Tian, 2010 .

Simultaneously optimizing pore morphology and enhancing mechanical properties of Al-Si alloy composite foams by graphene nanosheets

C. Shi, N. Zhao, C. He, 2021, Journal of Materials Science & Technology.

Three-dimensional core-shell Fe 2 O 3 @ carbon/carbon cloth as binder-free anode for the high-performance lithium-ion batteries

C. Shi, N. Zhao, C. He, 2016 .

{010}-Oriented micro-flower-like hierarchical Bi2WO6 with high adsorptivity and visible-light-driven photoactivity: experimental studies and first-principles modeling

C. Shi, N. Zhao, C. He, 2015 .

Compression‐compression fatigue performance of aluminium matrix composite foams reinforced by carbon nanotubes

R. Zong, Tianchun Zou, N. Zhao, 2020 .

Formation of the orientation relationship-dependent interfacial carbide in Al matrix composite affected by architectured carbon nanotube

Xiaofeng Chen, J. Tao, C. Shi, 2022, Acta Materialia.

Regulating microstructure of Al matrix composites with nanocarbon architecture design towards prominent strength-ductility combination

Xiaofeng Chen, J. Tao, C. Shi, 2022, Scripta Materialia.

Investigations on the interface-dominated deformation mechanisms of two-dimensional MAX-phase Ti3Al(Cu)C2 nanoflakes reinforced copper matrix composites

N. Zhao, C. He, Lishi Ma, 2022, Acta Materialia.

An in-plane Co9S8@MoS2 heterostructure for the hydrogen evolution reaction in alkaline media.

Biao Zhang, C. Shi, N. Zhao, 2019, Nanoscale.

Thermogravimetric analysis and TEM characterization of the oxidation and defect sites of carbon nanotubes synthesized by CVD of methane

C. Shi, N. Zhao, C. He, 2008 .

In-Situ Synthesis of Undulated Ni Anchored To Graphene/Al with One- Step Method

C. Shi, N. Zhao, C. He, 2017 .

Achieving prominent strengthening efficiency of graphene nanosheets in Al matrix composites by hybrid deformation

C. Shi, N. Zhao, C. He, 2021 .

Synergistic strengthening effect of in-situ synthesized WC1-x nanoparticles and graphene nanosheets in copper matrix composites

N. Zhao, C. He, Xiang Zhang, 2020, Composites Part A: Applied Science and Manufacturing.

Revealing the Strengthening and Toughening Mechanisms of Al-CuO Composite Fabricated Via In-Situ Solid-State Reaction

C. Shi, N. Zhao, C. He, 2020, Acta Materialia.

In situ fabrication of Ni(OH)2/Cu2O nanosheets on nanoporous NiCu alloy for high performance supercapacitor

P. Liu, C. Shi, N. Zhao, 2018, Electrochimica Acta.

Nanostructured hybrid layered-spinel cathode material synthesized by hydrothermal method for lithium-ion batteries.

C. Shi, N. Zhao, C. He, 2014, ACS applied materials & interfaces.

Nanotubular Ni-supported graphene @ hierarchical NiCo-LDH with ultrahigh volumetric capacitance for supercapacitors

C. Shi, N. Zhao, C. He, 2018, Applied Surface Science.

Fabrication of carbon-coated cobalt nanoparticles by the catalytic method

C. Shi, N. Zhao, C. He, 2008 .

Two Birds with One Stone: A NaCl-Assisted Strategy toward MoTe2 Nanosheets Nanoconfined in 3D Porous Carbon Network for Sodium-Ion Battery Anode

C. Shi, N. Zhao, C. He, 2022, Energy Storage Materials.

Exceptional mechanical properties of aluminum matrix composites with heterogeneous structure induced by in-situ graphene nanosheet-Cu hybrids

Xiaofeng Chen, C. Shi, N. Zhao, 2022, Composites Part B: Engineering.

In situ synthesis of copper-modified graphene-reinforced aluminum nanocomposites with balanced strength and ductility

N. Zhao, C. He, Jie Wang, 2019, Journal of Materials Science.

In-situ synthesis of graphene decorated with nickel nanoparticles for fabricating reinforced 6061Al matrix composites

C. Shi, N. Zhao, C. He, 2017 .

Synthesis of three-dimensional carbon networks decorated with Fe3O4 nanoparticles as lightweight and broadband electromagnetic wave absorber

C. Shi, N. Zhao, C. He, 2019, Journal of Alloys and Compounds.

Revealing The Bifunction Mechanism of Lacoo3 as Electrocatalyst: Oxygen Vacancies Effect and Synergistic Reaction Process

C. Shi, N. Zhao, C. He, 2023, SSRN Electronic Journal.

Effect of Interface Structure on the Mechanical Properties of Graphene Nanosheets Reinforced Copper Matrix Composites.

C. Shi, N. Zhao, C. He, 2018, ACS applied materials & interfaces.

Regulation of the Interface Binding and Elastic Properties of SiC/Ti via Doping‐Induced Electronic Localization

C. Shi, N. Zhao, C. He, 2019, physica status solidi (b).

Microstructure evolution and tensile behavior of MgAlB4w/Al composites at high temperatures

J. Li, C. Shi, N. Zhao, 2021 .

Spatially uniform Li deposition realized by 3D continuous duct-like graphene host for high energy density Li metal anode

Rui Zhang, C. Shi, N. Zhao, 2020 .

Si-Assisted Solidification Path and Microstructure Control of 7075 Aluminum Alloy with Improved Mechanical Properties by Selective Laser Melting

Jianglin Lan, N. Zhao, C. He, 2022, Acta Metallurgica Sinica (English Letters).

High strength-ductility synergy of MgAlB4 whisker reinforced aluminum matrix composites achieved by in situ synthesis

J. Li, C. Shi, N. Zhao, 2021 .

Orientation relationships and interface structure in MgAl2O4 and MgAlB4 co-reinforced Al matrix composites.

C. Shi, N. Zhao, C. He, 2019, ACS applied materials & interfaces.

Investigation of the evolution and strengthening effect of aluminum carbide for in-situ preparation of carbon nanosheets/aluminum composites

N. Zhao, C. He, E. Liu, 2019, Materials Science and Engineering: A.

Influence of spark plasma sintering temperature on the microstructure and strengthening mechanisms of discontinuous three-dimensional graphene-like network reinforced Cu matrix composites

N. Zhao, C. He, Xiang Zhang, 2019, Materials Science and Engineering: A.

Comparison of electronic structures and mechanical properties of MgAlB4, AlB2 and MgB2 using first-principles calculations

C. Shi, N. Zhao, C. He, 2020 .

Regulation of the interface binding and mechanical properties of TiB/Ti via doping-induced chemical and structural effects

C. Shi, N. Zhao, C. He, 2020 .

Achieving exceptional high-temperature resistant Al matrix composites via two-dimensional BN pinning grain rotation

N. Zhao, C. He, Y. Duan, 2023, Composites Part B: Engineering.

Microstructure and properties of copper coated graphene nanoplates reinforced Al matrix composites developed by low temperature ball milling

N. Zhao, C. He, Jiajun Li, 2020, Carbon.

Microstructure and properties of in situ generated MgAl2O4 spinel whisker reinforced aluminum matrix composites

Xi‐Wen Du, C. Shi, N. Zhao, 2013 .

Preparation and mechanical properties of in-situ synthesized nano-MgAl2O4 particles and MgxAl(1-x)B2 whiskers co-reinforced Al matrix composites

C. Shi, N. Zhao, C. He, 2018, Materials Science and Engineering: A.

In situ synthesis of a gamma-Al 2 O 3 whisker reinforced aluminium matrix composite by cold pressing and sintering

C. Shi, N. Zhao, C. He, 2018 .

In-situ synthesis of MgAl2O4 nanowhiskers reinforced 6061 aluminum alloy composites by reaction hot pressing

C. Shi, N. Zhao, C. He, 2014 .

Evolution of microstructure and properties of Al–Zn–Mg–Cu–Sc–Zr alloy during aging treatment

C. Shi, N. Zhao, C. He, 2016 .

Effect of Sc/Zr ratio on the microstructure and mechanical properties of new type of Al–Zn–Mg–Sc–Zr alloys

C. Shi, N. Zhao, C. He, 2014 .

Manipulating mechanical properties of graphene/Al composites by an in-situ synthesized hybrid reinforcement strategy

N. Zhao, C. He, Junwei Sha, 2022, Journal of Materials Science & Technology.

A bottom-up strategy toward metal nano-particles modified graphene nanoplates for fabricating aluminum matrix composites and interface study

N. Zhao, C. He, E. Liu, 2020 .

Enhanced mechanical properties and electrical conductivity of graphene nanoplatelets/Cu composites by in situ formation of Mo2C nanoparticles

C. Shi, N. Zhao, C. He, 2019, Materials Science and Engineering: A.

In situ synthesis of Ti2AlC–Al2O3/TiAl composite by vacuum sintering mechanically alloyed TiAl powder coated with CNTs

C. Shi, N. Zhao, C. He, 2013 .

Strongly coupled hollow-oxide/phosphide hybrid coated with nitrogen-doped carbon as highly efficient electrocatalysts in alkaline for hydrogen evolution reaction

Biao Zhang, C. Shi, N. Zhao, 2019, Journal of Catalysis.

In-situ processing and aging behaviors of MgAl2O4 spinel whisker reinforced 6061Al composite

Xi‐Wen Du, C. Shi, N. Zhao, 2014 .

Fabrication of aluminum carbide nanowires by a nano-template reaction

C. Shi, N. Zhao, C. He, 2010 .

An Approach to Obtaining Homogeneously Dispersed Carbon Nanotubes in Al Powders for Preparing Reinforced Al‐Matrix Composites

N. Zhao, C. He, X. Du, 2007 .

In-situ Al2O3-Al interface contribution towards the strength-ductility synergy of Al-CuO composite fabricated by solid-state reactive sintering

C. Shi, N. Zhao, C. He, 2021 .

Constructing the coherent transition interface structure for enhancing strength and ductility of hexagonal boron nitride nanosheets/Al composites

N. Zhao, C. He, Y. Duan, 2022, Journal of Materials Science & Technology.

Achieving the strength-ductility balance of boron nitride nanosheets/Al composite by designing the synergistic transition interface and intragranular reinforcement distribution

N. Zhao, C. He, Lishi Ma, 2022, Composites Part B: Engineering.

In-Situ Al 2O 3-Al Interface Contribution Towards the Strength-Ductility Synergy of Al-CuO Composite Fabricated by Solid-State Reactive Sintering

C. Shi, N. Zhao, C. He, 2021 .

Deformation mechanism of copper reinforced by three-dimensional graphene under torsion and tension

N. Zhao, C. He, Miaocao Wang, 2021, Modelling and Simulation in Materials Science and Engineering.

A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites

C. Shi, N. Zhao, C. He, 2020, Nature Communications.

Simultaneously enhanced strength and ductility of Al matrix composites through the introduction of intragranular nano-sized graphene nanoplates

N. Zhao, C. He, Jiajun Li, 2021 .

Synergistic strengthening effect of alumina anchored graphene nanosheets hybrid structure in aluminum matrix composites

C. Shi, N. Zhao, C. He, 2019, Fullerenes, Nanotubes and Carbon Nanostructures.

An approach for fabricating Ni@graphene reinforced nickel matrix composites with enhanced mechanical properties

C. Shi, N. Zhao, C. He, 2018 .

Fabrication of Carbon Nanotube-Reinforced 6061Al Alloy Matrix Composites by an In Situ Synthesis Method Combined with Hot Extrusion Technique

C. Shi, N. Zhao, C. He, 2016, Acta Metallurgica Sinica (English Letters).

In-situ synthesis of graphene nanosheets coated copper for preparing reinforced aluminum matrix composites

C. Shi, N. Zhao, C. He, 2018 .

Effect of GNPs on microstructures and mechanical properties of GNPs/Al-Cu composites with different heat treatment status

N. Zhao, C. He, Jiajun Li, 2021 .

Enhanced interface interaction between modified carbon nanotubes and magnesium matrix

C. Shi, N. Zhao, C. He, 2018 .

Elevated temperature compressive properties and energy absorption response of in-situ grown CNT-reinforced Al composite foams

C. Shi, N. Zhao, C. He, 2017 .

Smart hybridization of Sn2Nb2O7/SnO2@3D carbon nanocomposites with enhanced sodium storage performance through self-buffering effects

C. Shi, N. Zhao, C. He, 2017 .

Effects of active elements on adhesion of the Al2O3/Fe interface: A first principles calculation

C. Shi, N. Zhao, C. He, 2021, Computational Materials Science.

Compressive properties and energy absorption of aluminum composite foams reinforced by in-situ generated MgAl2O4 whiskers

Tianchun Zou, C. Shi, N. Zhao, 2015 .

Activated Carbon Nanochains with Tailored Micro-Meso Pore Structures and Their Application for Supercapacitors

C. Shi, N. Zhao, Shan Zhu, 2015 .

Architectured interfacial interlocking structure for enhancing mechanical properties of Al matrix composites reinforced with graphene nanosheets

N. Zhao, C. He, E. Liu, 2021 .

The superior mechanical and physical properties of nanocarbon reinforced bulk composites achieved by architecture design – A review

N. Zhao, C. He, Xiang Zhang, 2020 .

Correction to "Orientation Relationships and Interface Structure in MgAl2O4 and MgAlB4 Co-Reinforced Al Matrix Composites".

C. Shi, N. Zhao, C. He, 2020, ACS applied materials & interfaces.

Mo2C coating on diamond: Different effects on thermal conductivity of diamond/Al and diamond/Cu composites

C. Shi, N. Zhao, C. He, 2017 .

Fabrication and growth mechanism of carbon nanotubes by catalytic chemical vapor deposition

Yongdan Li, N. Zhao, C. He, 2006 .

Adhesion, bonding and mechanical properties of Mo doped diamond/Al (Cu) interfaces: A first principles study

C. Shi, N. Zhao, C. He, 2020 .

Towards strength-ductility synergy with favorable strengthening effect through the formation of a quasi-continuous graphene nanosheets coated Ni structure in aluminum matrix composite

C. Shi, N. Zhao, C. He, 2019, Materials Science and Engineering: A.

Direct synthesis of amorphous carbon nanotubes on Fe76Si9B10P5 glassy alloy particles

A. Makino, A. Inoue, C. Shi, 2013 .

In-situ fabrication of nano-sized TiO2 reinforced Cu matrix composites with well-balanced mechanical properties and electrical conductivity

C. Shi, N. Zhao, C. He, 2017 .

A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites

C. Shi, N. Zhao, C. He, 2020, Nature Communications.

Interface bonding and mechanical properties of copper/graphene interface doped with rare earth elements: First principles calculations

C. Shi, N. Zhao, C. He, 2022, Physica E: Low-dimensional Systems and Nanostructures.

Effect of Ti/Sc atom ratio on heterogeneous nuclei, microstructure and mechanical properties of A357-0.033Sr alloys

C. Shi, N. Zhao, C. He, 2016 .

Chemical vapor deposition synthesis of carbon nanospheres over Fe-based glassy alloy particles

C. Shi, N. Zhao, C. He, 2014 .

Low-temperature synthesis of multi-walled carbon nanotubes over Cu catalyst

Xi‐Wen Du, C. Shi, N. Zhao, 2012 .

Carbon-encapsulated Fe3O4 nanoparticles as a high-rate lithium ion battery anode material.

Jiajun Li, Naiqin Zhao, Chunnian He, 2013, ACS nano.

2D Space-Confined Synthesis of Few-Layer MoS2 Anchored on Carbon Nanosheet for Lithium-Ion Battery Anode.

Jian Qin, Xiang Zhang, Jiajun Li, 2015, ACS nano.

Ultralight metal foams

B. Jiang, C. Shi, N. Zhao, 2015, Scientific Reports.

Microstructural evolution in Al-Zn-Mg-Cu-Sc-Zr alloys during short-time homogenization

C. Shi, N. Zhao, C. He, 2015, International Journal of Minerals, Metallurgy, and Materials.

Combined Effects of Pre-deformation and Pre-aging on the Mechanical Properties of Al-Cu-Mg Alloy with Sc and Zr Addition

C. Shi, N. Zhao, C. He, 2018, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Unraveling the enhanced stability and strength of Al Σ9 (221)[$$ 1\bar{1}0 $$] symmetric tilt grain boundary with Mg segregation

C. Shi, N. Zhao, C. He, 2022, Journal of Materials Science.

Copper-Coated Graphene Nanoplatelets-Reinforced Al–Si Alloy Matrix Composites Fabricated by Stir Casting Method

N. Zhao, C. He, Lizhuang Yang, 2020, Acta Metallurgica Sinica (English Letters).

Ultrathin‐Nanosheet‐Induced Synthesis of 3D Transition Metal Oxides Networks for Lithium Ion Battery Anodes

C. Shi, N. Zhao, Shan Zhu, 2017 .

Fabrication of three-dimensional graphene/Cu composite by in-situ CVD and its strengthening mechanism

N. Zhao, C. He, E. Liu, 2016 .

Preparation of Fe3O4/rebar graphene composite via solvothermal route as binder free anode for lithium ion batteries

C. Shi, N. Zhao, C. He, 2016 .

In-situ grown CNTs modified SiO 2 /C composites as anode with improved cycling stability and rate capability for lithium storage

C. Shi, N. Zhao, C. He, 2018 .

Nitrogen and oxygen co-doped 3D nanoporous duct-like graphene@carbon nano-cage hybrid films for high-performance multi-style supercapacitors

C. Shi, C. He, Liping Wang, 2017 .

Synthesis of novel carbon nano-chains and their application as supercapacitors

C. Shi, N. Zhao, C. He, 2014 .

Sandwiched C@SnO2@C hollow nanostructures as an ultralong-lifespan high-rate anode material for lithium-ion and sodium-ion batteries

C. Shi, N. Zhao, C. He, 2017 .

Engineering Pocket‐Like Graphene–Shell Encapsulated FeS2: Inhibiting Polysulfides Shuttle Effect in Potassium‐Ion Batteries

C. Shi, N. Zhao, Shan Zhu, 2021, Advanced Functional Materials.

N-Doped Porous Carbon Nanofibers/Porous Silver Network Hybrid for High-Rate Supercapacitor Electrode.

C. Shi, N. Zhao, C. He, 2017, ACS applied materials & interfaces.

Yolk-shelled Sb@C nanoconfined nitrogen/sulfur co-doped 3D porous carbon microspheres for sodium-ion battery anode with ultralong high-rate cycling

Biao Zhang, C. Shi, N. Zhao, 2019 .

Porous graphitic carbon nanosheets as a high-rate anode material for lithium-ion batteries.

C. Shi, N. Zhao, C. He, 2013, ACS applied materials & interfaces.

Space-Confined Synthesis of Three-Dimensional Boron/Nitrogen-Doped Carbon Nanotubes/Carbon Nanosheets Line-in-Wall Hybrids and Their Electrochemical Energy Storage Applications

C. Shi, N. Zhao, Shan Zhu, 2016 .

Controllable graphene incorporation and defect engineering in MoS2-TiO2 based composites: Towards high-performance lithium-ion batteries anode materials

Fang He, Biao Chen, Tingting Cao, 2017 .

Three-Dimensional Network of N-Doped Carbon Ultrathin Nanosheets with Closely Packed Mesopores: Controllable Synthesis and Application in Electrochemical Energy Storage.

C. Shi, N. Zhao, Shan Zhu, 2016, ACS applied materials & interfaces.

Improve the Supercapacity Performance of MnO2-Decorated Graphene by Controlling the Oxidization Extent of Graphene

C. Shi, N. Zhao, C. He, 2012 .

Synthesis of 2D/3D carbon hybrids by heterogeneous space-confined effect for electrochemical energy storage

C. Shi, N. Zhao, Shan Zhu, 2017 .

Data-driven design and controllable synthesis of Pt/carbon electrocatalysts for H2 evolution

N. Zhao, Shan Zhu, C. He, 2021, iScience.

Enhanced Hydrogen Evolution Reaction Performance of NiCo2P by Phosphorus Filling the Oxygen Vacancies in Thin Coating CeO2.

C. Shi, N. Zhao, C. He, 2019, ACS applied materials & interfaces.

Cycle performance improvement of Li-rich layered cathode material Li[Li0.2Mn0.54Ni0.13Co0.13]O2 by ZrO2 coating

C. Shi, N. Zhao, C. He, 2013 .

Enhanced electrochemical hydrogen storage capacity of multi-walled carbon nanotubes by TiO2 decoration

Xi‐Wen Du, C. Shi, N. Zhao, 2011 .

The effect of outer tube on quasi-static compression behavior of aluminum foam-filled tubes

Tianchun Zou, N. Zhao, C. He, 2020 .

Boosting the charge transfer efficiency of metal oxides/carbon nanotubes composites through interfaces control

C. Shi, N. Zhao, Shan Zhu, 2021 .

Three-dimensional graphene anchored Fe2O3@C core-shell nanoparticles as supercapacitor electrodes

C. Shi, N. Zhao, C. He, 2017 .

Multi-functional integration of pore P25@C@MoS2 core-double shell nanostructures as robust ternary anodes with enhanced lithium storage properties

C. Shi, N. Zhao, C. He, 2017 .

Hydrogen spillover storage on Ca-decorated graphene

C. Shi, N. Zhao, C. He, 2012 .

Facile synthesis of 3D few-layered MoS₂ coated TiO₂ nanosheet core-shell nanostructures for stable and high-performance lithium-ion batteries.

C. Shi, N. Zhao, C. He, 2015, Nanoscale.

Interface modulation mechanism of alloying elements on the interface interaction and mechanical properties of graphene/copper composites

C. Shi, N. Zhao, C. He, 2022, Applied Surface Science.

Recent Developments of Antimony-Based Anodes for Sodium- and Potassium-Ion Batteries

N. Zhao, Shan Zhu, C. He, 2021, Transactions of Tianjin University.

Heterostructure Engineering of Core-Shelled Sb@Sb2 O3 Encapsulated in 3D N-Doped Carbon Hollow-Spheres for Superior Sodium/Potassium Storage.

C. Shi, N. Zhao, C. He, 2021, Small.

Ultrasmall Fe2GeO4 nanodots anchored on interconnected carbon nanosheets as high-performance anode materials for lithium and sodium ion batteries

C. Shi, N. Zhao, C. He, 2018 .

“Ethanol–water exchange” nanobubbles templated hierarchical hollow β-Mo2C/N-doped carbon composite nanospheres as an efficient hydrogen evolution electrocatalyst

C. Shi, N. Zhao, C. He, 2018 .

Synthesis of interconnected carbon nanosheets anchored with Fe3O4 nanoparticles as broadband electromagnetic wave absorber

C. Shi, N. Zhao, C. He, 2019, Chemical Physics Letters.

Low-temperature CVD synthesis of carbon-encapsulated magnetic Ni nanoparticles with a narrow distribution of diameters

Xi‐Wen Du, C. Shi, N. Zhao, 2006 .

In situ preparation of interconnected networks constructed by using flexible graphene/Sn sandwich nanosheets for high-performance lithium-ion battery anodes

Xiang Zhang, Jian Qin, Jiajun Li, 2015 .

Salt-template-assisted synthesis of robust 3D honeycomb-like structured MoS2 and its application as a lithium-ion battery anode

C. Shi, N. Zhao, C. He, 2016 .

In situ synthesized Li2S@porous carbon cathode for graphite/Li2S full cells using ether-based electrolyte

C. Shi, N. Zhao, C. He, 2017 .

Low-temperature synthesis of carbon onions by chemical vapor deposition using a nickel catalyst supported on aluminum

Xi‐Wen Du, Yongdan Li, C. Shi, 2006 .

Unraveling the mechanism of hydrogen evolution reaction on cobalt compound electrocatalysts

Tao Yang, C. Shi, N. Zhao, 2021 .

Ultralight Co/Ag composite foams: Synthesis, morphology and compressive property

B. Jiang, C. Shi, N. Zhao, 2016 .

Synthesis of uniform and superparamagnetic Fe3O4 nanocrystals embedded in a porous carbon matrix for a superior lithium ion battery anode

C. Shi, N. Zhao, C. He, 2013 .

2D sandwich-like carbon-coated ultrathin TiO2@defect-rich MoS2 hybrid nanosheets: Synergistic-effect-promoted electrochemical performance for lithium ion batteries

C. Shi, N. Zhao, C. He, 2016 .

A hybrid energy storage mechanism of carbonous anodes harvesting superior rate capability and long cycle life for sodium/potassium storage

Xifei Li, C. He, Jian Qin, 2019, Journal of Materials Chemistry A.

In situ synthesis of high content graphene nanoplatelets reinforced Cu matrix composites with enhanced thermal conductivity and tensile strength

C. Shi, N. Zhao, C. He, 2020 .

Interfacial chemical bonding between carbon nanotube and aluminum substrate modulated by alloying elements

C. Shi, N. Zhao, C. He, 2015 .

ZnO nanoconfined 3D porous carbon composite microspheres to stabilize lithium nucleation/growth for high-performance lithium metal anodes

Rui Zhang, Jiayan Luo, C. Shi, 2019, Journal of Materials Chemistry A.

Data-Driven Design of Carbon-Based Materials for High-Performance Flexible Energy Storage Devices

N. Zhao, Shan Zhu, C. He, 2023, SSRN Electronic Journal.

Graphene Oxide-Assisted Synthesis of Microsized Ultrathin Single-Crystalline Anatase TiO2 Nanosheets and Their Application in Dye-Sensitized Solar Cells.

C. Shi, N. Zhao, C. He, 2016, ACS applied materials & interfaces.

Interface and Doping Effects on Li Ion Storage Behavior of Graphene/Li2O

Tianshuai Wang, C. Shi, N. Zhao, 2017 .

Dopant-Modulating Mechanism of Lithium Adsorption and Diffusion at the Graphene/Li2S Interface

C. Shi, N. Zhao, C. He, 2018 .

Compressive responses and strengthening mechanisms of aluminum composite foams reinforced with graphene nanosheets

C. Shi, N. Zhao, C. He, 2019, Carbon.

Compressive Response and Energy Absorption Characteristics of In Situ Grown CNT‐Reinforced Al Composite Foams

C. Shi, N. Zhao, C. He, 2017 .

Crushing behavior and energy absorption property of carbon nanotube-reinforced aluminum composite foam-filled 6061 aluminum alloy tubes

N. Zhao, C. He, Junwei Sha, 2020, Journal of Materials Science.

Fabrication of in-situ grown carbon nanotubes reinforced aluminum alloy matrix composite foams based on powder metallurgy method

C. Shi, N. Zhao, C. He, 2018, Materials Letters.

Synthesis of carbon nanostructures with different morphologies by CVD of methane

Jiajun Li, Naiqin Zhao, Chunnian He, 2007 .

Bamboo-shaped carbon nanotubes produced by catalytic decomposition of methane over nickel nanoparticles supported on aluminum

Xi‐Wen Du, Zhi Qiao, C. Shi, 2007 .

Bismuth-Antimony Alloy Nanoparticles Encapsulated in 3D Carbon Framework: Synergistic Effect for Enhancing Interfacial Potassium Storage

N. Zhao, C. He, Zhiyi Wu, 2021, Chemical Engineering Journal.

Surface reconstruction of CoO (111) and its effects on the formation of oxygen vacancy and OER activity

Tao Yang, C. Shi, N. Zhao, 2021 .

Carbon and few-layer MoS2 nanosheets co-modified TiO2 nanosheets with enhanced electrochemical properties for lithium storage

C. Shi, N. Zhao, C. He, 2018, Rare Metals.

Nitrogen-doped graphene network supported copper nanoparticles encapsulated with graphene shells for surface-enhanced Raman scattering.

C. Shi, N. Zhao, C. He, 2015, Nanoscale.

High-strength graphene network reinforced copper matrix composites achieved by architecture design and grain structure regulation

C. Shi, N. Zhao, C. He, 2019, Materials Science and Engineering: A.

Engineering the Interfacial Doping of 2d Heterostructures with Good Bidirectional Reaction Kinetics for Durably Reversible Sodium-Ion Batteries

Guangmin Zhou, N. Zhao, C. He, 2023, SSRN Electronic Journal.

Magnetic properties and transmission electron microscopy studies of Ni nanoparticles encapsulated in carbon nanocages and carbon nanotubes

C. Shi, N. Zhao, C. He, 2008 .

Long-lifespan sodium ion capacitors enabled by in-situ electrochemically induced graphitization and rearrangement of carbon layers in Fe2O3@C modified vertical-aligned carbon nanotubes

N. Zhao, C. He, Junwei Sha, 2023, Journal of Power Sources.

W Clusters In Situ Assisted Synthesis of Layered Carbon Nanotube Arrays on Graphene Achieving High-Rate Performance.

C. Shi, N. Zhao, C. He, 2021, ACS applied materials & interfaces.

Interface and Doping Effect on the Electrochemical Property of Graphene/LiFePO4

C. Shi, N. Zhao, C. He, 2016 .

Continuous confined interfacial design in graphene/Cu composites with structural integrity enables improvement of comprehensive properties

C. Shi, N. Zhao, C. He, 2023, Composites Part A: Applied Science and Manufacturing.

Defect Effects on the Interfacial Interactions between a (5, 5) Carbon Nanotube and an Al (111) Surface

C. Shi, N. Zhao, C. He, 2016 .

The influences of synthesis temperature and Ni catalyst on the growth of carbon nanotubes by chemical vapor deposition

C. Shi, N. Zhao, C. He, 2008 .

A carbon nanotube–alumina network structure for fabricating epoxy composites

C. He, F. Tian, 2009 .

Enhanced electrochemical performance of LiFePO4 cathode with in-situ chemical vapor deposition synthesized carbon nanotubes as conductor

Xi‐Wen Du, C. Shi, N. Zhao, 2012 .

High mechanical strengthened CNTs/Al composite concepts with robust interface and intragranular reinforcement achieved via interfacial thermite reaction

Xiaofeng Chen, C. Shi, N. Zhao, 2023, Composites Part A: Applied Science and Manufacturing.

Achieving high mechanical properties and corrosion resistance of Al-Zn-Mg matrix composites via regulating intragranular reinforcements

Xiaofeng Chen, C. Shi, N. Zhao, 2023, Journal of Materials Science & Technology.

Enhanced electrochemical properties of LiCo0.5Ni0.5O2 by Ti-doping: A first-principle study

C. Shi, N. Zhao, C. He, 2015 .

Electronic reconfiguration of Co2P induced by Cu doping enhancing oxygen reduction reaction activity in zinc–air batteries

Tao Yang, Biao Zhang, C. Shi, 2019, Journal of Materials Chemistry A.

Towards the work hardening and strain delocalization achieved via in-situ intragranular reinforcement in Al-CuO composite

D. Wan, Xiaofeng Chen, C. Shi, 2023, Acta Materialia.

Hierarchically structured carbon-coated SnO2-Fe3O4 microparticles with enhanced lithium storage performance

C. Shi, N. Zhao, C. He, 2016 .

A simple method for fabricating single-crystalline Fe nanowires

S. J. Liu, C. He, F. Tian, 2009 .

NaCl sealing Strategy-Assisted synthesis CoO-Co heterojunctions as efficient oxygen electrocatalysts for Zn air batteries.

Wei Zhou, C. Shi, C. He, 2023, Journal of colloid and interface science.

Carbon-coated Fe2O3 nanocrystals with enhanced lithium storage capability

C. Shi, N. Zhao, C. He, 2015 .

In situ strain-induced phase transition and defect engineering in CVD-synthesized atomically thin MoS2

C. Sow, C. He, Yimin Zhang, 2023, 2D Materials.

Boron doping effect on the interface interaction and mechanical properties of graphene reinforced copper matrix composite

C. Shi, N. Zhao, C. He, 2017 .

Self-healing polymer-based electrolyte induced by amorphous three-dimensional carbon for high-performance solid-state Li metal batteries

Rui Zhang, C. Shi, N. Zhao, 2023, Energy Storage Materials.

Sandwiched graphene inserted with graphene-encapsulated yolk–shell γ-Fe2O3 nanoparticles for efficient lithium ion storage

C. Shi, N. Zhao, C. He, 2017 .

One-pot synthesis of uniform Fe3O4 nanocrystals encapsulated in interconnected carbon nanospheres for superior lithium storage capability

C. Shi, N. Zhao, C. He, 2013 .

Achieving excellent thermal stability in continuous three-dimensional graphene network reinforced copper matrix composites

N. Zhao, C. He, F. Zhu, 2023, Carbon.

On the affected strength of Al grain boundaries by Zn segregation: A first-principles interpretation

C. Shi, N. Zhao, C. He, 2022, Computational materials science.

Defects control of aluminum alloys and their composites fabricated via laser powder bed fusion: A review

Zongqing Ma, C. Shi, N. Zhao, 2023, Journal of Materials Processing Technology.

Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network.

C. Shi, N. Zhao, C. He, 2017, Nanoscale.

Effect of MgO particles with in-situ graphene coating on mechanical and thermal expansion properties of aluminum matrix composites

N. Zhao, C. He, X. Rong, 2023, Journal of Alloys and Compounds.

1D Sub‐Nanotubes with Anatase/Bronze TiO2 Nanocrystal Wall for High‐Rate and Long‐Life Sodium‐Ion Batteries

Fangxi Xie, N. Zhao, C. He, 2018, Advanced materials.

Catalyst effects of fabrication of carbon nanotubes synthesized by chemical vapor deposition

N. Zhao, C. He, F. Tian, 2009 .

Facile synthesis of 3D few-layered MoS₂ coated TiO₂ nanosheet core-shell nanostructures for stable and high-performance lithium-ion batteries.

C. Shi, N. Zhao, C. He, 2015, Nanoscale.

Interfacial engineering of transition metal dichalcogenide/carbon heterostructures for electrochemical energy applications.

N. Zhao, C. He, Simi Sui, 2023, Chemical Society reviews.

Surface double phase network modified lithium rich layered oxides with improved rate capability for Li-ion batteries.

C. Shi, N. Zhao, C. He, 2015, ACS applied materials & interfaces.

Exceptional dynamic compressive properties of bio-inspired three-dimensional interlocking graphene network reinforced copper matrix composites

N. Zhao, C. He, Xiang Zhang, 2023, Composites Part A: Applied Science and Manufacturing.

Enhanced Hydrogen Evolution Reaction Performance of NiCo2P by Phosphorus Filling the Oxygen Vacancies in Thin Coating CeO2.

C. Shi, N. Zhao, C. He, 2019, ACS applied materials & interfaces.

Three-dimensional porous bowl-shaped carbon cages interspersed with carbon coated Ni–Sn alloy nanoparticles as anode materials for high-performance lithium-ion batteries

C. Shi, N. Zhao, C. He, 2017 .

Catalytic synthesis of carbon nanostructures using Fe(OH)3/Al as catalyst precursors

Xi‐Wen Du, C. Shi, N. Zhao, 2009 .

Review: recent progress in aluminum matrix composites reinforced by in situ oxide ceramics

N. Zhao, C. He, X. Rong, 2023, Journal of Materials Science.

Utilizing ion-etching strategy to construct ultra-lightweight CoNi alloy-modified electrospun carbon fiber composites for efficient electromagnetic wave absorption

C. He, Chuangchuang Gong, Yijing Zhang, 2024, Journal of Materials Science.

Interfacial effect on the electrochemical properties of the layered graphene/metal sulfide composites as anode materials for Li-ion batteries

C. Shi, N. Zhao, C. He, 2016 .

Room-Temperature Salt Template Synthesis of Nitrogen-Doped 3D Porous Carbon for Fast Metal-Ion Storage.

Xiaopeng Han, N. Zhao, C. He, 2023, Angewandte Chemie.

Defects induced the bilayer graphene-copper hybrid and its effect on mechanical properties of graphene reinforced copper matrix composites

C. Shi, N. Zhao, C. He, 2023, Applied Surface Science.