D. Miranda

发表

Computer simulation of the influence of thermal conditions on the performance of conventional and unconventional lithium-ion battery geometries

S. Lanceros‐Méndez, C. Costa, D. Miranda, 2018 .

Lithium ion rechargeable batteries: State of the art and future needs of microscopic theoretical models and simulations

Senentxu Lanceros-Méndez, Carlos M. Costa, S. Lanceros‐Méndez, 2015 .

Enhanced performance of fluorinated separator membranes for lithium ion batteries through surface micropatterning

S. Lanceros‐Méndez, T. Marques-Almeida, C. Costa, 2019, Energy Storage Materials.

Effect of the active material type and battery geometry on the thermal behavior of lithium-ion batteries

S. Lanceros-Méndez, S. Lanceros‐Méndez, C. Costa, 2019, Energy.

High performance screen printable lithium-ion battery cathode ink based on C-LiFePO4

Joel Oliveira, Carlos M. Costa, Maria Manuela Silva, 2016 .

Modeling separator membranes physical characteristics for optimized lithium ion battery performance

Senentxu Lanceros-Méndez, Carlos M. Costa, A. M. Almeida, 2015 .

Lattice microstructure design for cathode electrodes for high-performance lithium-ion batteries

D. Miranda, C. Costa, S. Lanceros-Mendez, 2022, INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS ICNAAM 2020.

Theoretical simulation of different 3D separator geometries for lithium-ion batteries

S. Lanceros‐Méndez, C. Costa, D. Miranda, 2020 .

Theoretical simulation of the influence of cathode formulation on lithium-ion battery performance

S. Lanceros‐Méndez, C. Costa, D. Miranda, 2019, CENTRAL EUROPEAN SYMPOSIUM ON THERMOPHYSICS 2019 (CEST).

Computer simulation evaluation of the geometrical parameters affecting the performance of two dimensional interdigitated batteries

S. Lanceros‐Méndez, C. Costa, D. Miranda, 2016 .

Functional Piezoresistive Polymer‐Composites Based on Polycarbonate and Polylactic Acid for Deformation Sensing Applications

V. Correia, S. Lanceros‐Méndez, J. Viana, 2020, Macromolecular Materials and Engineering.

Solid polymer electrolytes based on lithium bis(trifluoromethanesulfonyl)imide/poly(vinylidene fluoride -co-hexafluoropropylene) for safer rechargeable lithium-ion batteries

S. Lanceros‐Méndez, C. Costa, J. G. Ribelles, 2019, Sustainable Materials and Technologies.

Computer simulations of the influence of geometry in the performance of conventional and unconventional lithium-ion batteries

Senentxu Lanceros-Méndez, Carlos M. Costa, D. Miranda, 2016 .

Lithium bis(trifluoromethanesulfonyl)imide blended in polyurethane acrylate photocurable solid polymer electrolytes for lithium-ion batteries

S. Lanceros‐Méndez, J. Vilas‐Vilela, C. Costa, 2021 .

Overview on Theoretical Simulations of Lithium‐Ion Batteries and Their Application to Battery Separators

S. Lanceros‐Méndez, S. Wuttke, C. Costa, 2023, Advanced Energy Materials.

Transparent Piezoelectric Polymer-Based Materials for Energy Harvesting and Multitouch Detection Devices

V. Correia, S. Lanceros‐Méndez, D. Miranda, 2021, ACS Applied Electronic Materials.

Patterned separator membranes with pillar surface microstructures for improved battery performance.

S. Lanceros‐Méndez, T. Marques-Almeida, C. Costa, 2021, Journal of colloid and interface science.

Theoretical simulation of the optimal relation between active material, binder and conductive additive for lithium-ion battery cathodes

S. Lanceros‐Méndez, C. Costa, D. Miranda, 2019, Energy.

Printable piezoresistive polymer composites for self-sensing medical catheter device applications

C. Tubio, D. Miranda, S. Lanceros-Mendez, 2023, Composites Science and Technology.

Thermal analysis of lithium-ion batteries with square frame geometries by theoretical simulations

S. Lanceros‐Méndez, C. Costa, D. Miranda, 2017 .

Cone geometry optimization and thermal behavior for lithium-ion battery separators

S. Lanceros‐Méndez, C. Costa, D. Miranda, 2020 .