Yuliang Cao

发表

Building thermally stable Li-ion batteries using a temperature-responsive cathode

Weixiao Ji, Feng Wang, Daotan Liu, 2016 .

Electrochemical behavior of biphenyl as polymerizable additive for overcharge protection of lithium ion batteries

L. Xiao, Yuliang Cao, Hanxi Yang, 2004 .

Temperature-sensitive cathode materials for safer lithium-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2011 .

Molten salt synthesis of LiMn1.2Ni0.3Cr0.1Co0.15Al0.23La0.02O4 as a positive electrode for lithium‐ion batteries

Yuliang Cao, E. Iffer, M. Belaiche, 2021 .

Molten salt synthesis of LiMn 1 . 2 Ni 0 . 3 Cr 0 .

Yuliang Cao, E. Iffer, M. Belaiche, 2021 .

Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries

Jun Liu, Ji-Guang Zhang, Xiaoyu Jiang, 2018, Nature Energy.

An electrochemically compatible and flame-retardant electrolyte additive for safe lithium ion batteries

Feng Pei, Xinping Ai, Yuliang Cao, 2013 .

Enhanced electrochemical performance of Mg-doped LiCoO2 synthesized by a polymer-pyrolysis method

Yuliang Cao, Hanxi Yang, X. Ai, 2014 .

Bis(2,2,2-trifluoroethyl) methylphosphonate: An Novel Flame-retardant Additive for Safe Lithium-ion Battery

Xiaoyu Jiang, Xinping Ai, Binbing Wu, 2014 .

Sodium ion insertion in hollow carbon nanowires for battery applications.

Jun Liu, Zimin Nie, Jie Xiao, 2012, Nano letters.

Highly Selective and Pollution-Free Electrochemical Extraction of Lithium by a Polyaniline/Lix Mn2 O4 Cell.

Yuliang Cao, Hanxi Yang, X. Ai, 2019, ChemSusChem.

Surface Modification of Fe7 S8 /C Anode via Ultrathin Amorphous TiO2 Layer for Enhanced Sodium Storage Performance.

Yuliang Cao, Hanxi Yang, X. Ai, 2020, Small.

Enabling a high capacity and long cycle life for nano-Si anodes by building a stable solid interface with a Li+-conducting polymer

Daotan Liu, Jiangfeng Qian, Yuliang Cao, 2015 .

Reversible Sodium Ion Insertion in Single Crystalline Manganese Oxide Nanowires with Long Cycle Life

Zhenguo Yang, Jun Liu, Zimin Nie, 2011, Advanced materials.

A Li+-conductive microporous carbon–sulfur composite for Li-S batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2013 .

Electrolytes for Dual‐Carbon Batteries

Weihua Chen, Yuliang Cao, Hanxi Yang, 2019, ChemElectroChem.

Preparation and performance characterization of polymer Li-ion batteries using gel poly(diacrylate) electrolyte prepared by in situ thermal polymerization

Liangjie Yuan, Yuliang Cao, Hanxi Yang, 2005 .

Low temperature hydrothermal synthesis and electrochemical performances of LiFePO4 microspheres as a cathode material for lithium-ion batteries

Min Zhou, Jiangfeng Qian, Yuliang Cao, 2012 .

Yolk-Shell TiO2@C Nanocomposite as High-Performance Anode Material for Sodium-Ion Batteries.

Yuliang Cao, Hanxi Yang, X. Ai, 2017, ACS applied materials & interfaces.

Effect of Li1/3Mn2/3-Substitution on Electrochemical Performance of P2-Na0.74CoO2 Cathode for Sodium-ion Batteries

Jiangfeng Qian, Yuliang Cao, Zhongxue Chen, 2016 .

Hierarchical porous Li2FeSiO4/C composite with 2 Li storage capacity and long cycle stability for advanced Li-ion batteries

Kai Xie, Xiaobin Hong, Jiangfeng Qian, 2013 .

Molecular structures of polymer/sulfur composites for lithium–sulfur batteries with long cycle life

M. Engelhard, Jun Liu, Jie Xiao, 2013 .

A Soft Approach to Encapsulate Sulfur: Polyaniline Nanotubes for Lithium‐Sulfur Batteries with Long Cycle Life

Jun Liu, Zimin Nie, Jie Xiao, 2012, Advanced materials.

TiO2 ceramic-grafted polyethylene separators for enhanced thermostability and electrochemical performance of lithium-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2016 .

In Situ-Formed Artificial Solid Electrolyte Interphase for Boosting the Cycle Stability of Si-Based Anodes for Li-Ion Batteries.

Yuliang Cao, Hanxi Yang, X. Ai, 2021, ACS applied materials & interfaces.

Building a Cycle-Stable Fe-Si alloy/Carbon Nanocomposite Anode for Li-Ion Batteries through a Covalent Bonding Method.

Yuliang Cao, Hanxi Yang, X. Ai, 2020, ACS applied materials & interfaces.

Antimony-Coated SiC Nanoparticles as Stable and High-Capacity Anode Materials for Li-Ion Batteries

Jiangfeng Qian, Yuliang Cao, Zhongxue Chen, 2010 .

Stable Li Metal Anode with “Ion–Solvent-Coordinated” Nonflammable Electrolyte for Safe Li Metal Batteries

Yuyan Shao, Jun Liu, L. Zhuang, 2019, ACS Energy Letters.

Low-defect Prussian blue nanocubes as high capacity and long life cathodes for aqueous Na-ion batteries

Xinping Ai, Jiangfeng Qian, Yuliang Cao, 2015 .

Metal/ covalent‐organic frameworks for electrochemical energy storage applications

Weihua Chen, Yuliang Cao, Hanxi Yang, 2021, EcoMat.

Vacancy‐Free Prussian Blue Nanocrystals with High Capacity and Superior Cyclability for Aqueous Sodium‐Ion Batteries

Yong Liu, Xinping Ai, Jiangfeng Qian, 2015 .

Preparation and electrochemical characterization of the alkaline polymer gel electrolyte polymerized from acrylic acid and KOH solution

Yuliang Cao, Yuliang Cao, Hanxi Yang, 2004 .

Hard carbon nanoparticles as high-capacity, high-stability anodic materials for Na-ion batteries

Wei Wang, Jun Liu, Zimin Nie, 2016 .

Anodically electrodeposited iridium oxide films microelectrodes for neural microstimulation and recording

Yuliang Cao, Yanwen Y Duan, Tanyu Wang, 2009 .

Electrodeposited polypyrrole/carbon nanotubes composite films electrodes for neural interfaces.

Yuliang Cao, Yanwen Y Duan, Yuliang Cao, 2010, Biomaterials.

Electrochemical hydrogen storage behaviors of ultrafine Co–P particles prepared by direct ball-milling method

Xueping Gao, Wenchao Zhou, Xiaoyan Li, 2006 .

Poly(vinyl alcohol)/poly(acrylic acid) hydrogel coatings for improving electrode-neural tissue interface.

Yuliang Cao, Yanwen Y Duan, Yuliang Cao, 2009, Biomaterials.

Electrochemical performances of Al-based composites as anode materials for Li-ion batteries

Jiangfeng Qian, Yuliang Cao, Zhongxue Chen, 2009 .

Mixed polyanion cathode materials: Toward stable and high-energy sodium-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2021 .

Recent Advances in Sodium-Ion Battery Materials

Yuliang Cao, Zhongxue Chen, Hanxi Yang, 2018, Electrochemical Energy Reviews.

Cathode and Anode Materials for Na-Ion Battery

Jun Liu, Yuliang Cao, Lifen Xao, 2014 .

Graphene-Scaffolded Na3V2(PO4)3 Microsphere Cathode with High Rate Capability and Cycling Stability for Sodium Ion Batteries.

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2017, ACS applied materials & interfaces.

High-Safety Symmetric Sodium-Ion Batteries Based on Nonflammable Phosphate Electrolyte and Double Na3V2(PO4)3 Electrodes.

Weihua Chen, Yuliang Cao, Hanxi Yang, 2019, ACS applied materials & interfaces.

Graphene‐Modified TiO2 Microspheres Synthesized by a Facile Spray‐Drying Route for Enhanced Sodium‐Ion Storage

Xiaolin Liu, Yuliang Cao, Hanxi Yang, 2016 .

Pseudocapacitive Trimetal Fe0.8CoMnO4 Nanoparticles@Carbon Nanofibers as High‐Performance Sodium Storage Anode with Self‐Supported Mechanism

Yuliang Cao, Hao Li, Li-jun Wu, 2020, Advanced Functional Materials.

Graphene-Wrapped Na2C12H6O4 Nanoflowers as High Performance Anodes for Sodium-Ion Batteries.

Wenwen Deng, Jiangfeng Qian, Yuliang Cao, 2016, Small.

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li+-conducting cathode-electrolyte interphase

Jun Lu, Yuliang Cao, Hanxi Yang, 2021, Journal of Materials Chemistry A.

Structural and electrochemical characterization of nanocrystalline LI[Li0.12Ni0.32Mn(0.56)]O2 synthesized by a polymer-pyrolysis route.

Lihong Yu, Yuliang Cao, Hanxi Yang, 2005, The journal of physical chemistry. B.

Synthesis and electrochemical properties of submicron LiNi0.8Co0.2O2 by a polymer-pyrolysis method

Yuliang Cao, Hanxi Yang, X. Ai, 2008 .

Improved Initial Charging Capacity of Na-poor Na0.44MnO2via Chemical Presodiation Strategy for Low-cost Sodium-ion Batteries

Yuliang Cao, Zhongxue Chen, Hanxi Yang, 2021, Chemical Research in Chinese Universities.

Research progress of tunnel-structural Na0.44MnO2 cathode for sodium-ion batteries: A mini review

Yuliang Cao, Zhongxue Chen, Along Zhao, 2020 .

Nanosized Na4Fe(CN)6/C Composite as a Low‐Cost and High‐Rate Cathode Material for Sodium‐Ion Batteries

Min Zhou, Xinping Ai, Yuliang Cao, 2012 .

A low-defect and Na-enriched Prussian blue lattice with ultralong cycle life for sodium-ion battery cathode

Weihua Chen, Jiangfeng Qian, Yuliang Cao, 2020 .

Investigation of the Effect of Fluoroethylene Carbonate Additive on Electrochemical Performance of Sb-Based Anode for Sodium-Ion Batteries

Haiyan Lu, Yuliang Cao, Hanxi Yang, 2016 .

SiC-Sb-C nanocomposites as high-capacity and cycling-stable anode for sodium-ion batteries

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2013 .

A Sn–SnS–C nanocomposite as anode host materials for Na-ion batteries

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2013 .

Electroactive organic anion-doped polypyrrole as a low cost and renewable cathode for sodium-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2013 .

A high voltage cathode of Na2+2xFe2−x(SO4)3 intensively protected by nitrogen-doped graphene with improved electrochemical performance of sodium storage

Wei Wang, Yongyao Xia, Yuliang Cao, 2018 .

Antimony Nanocrystals Encapsulated in Carbon Microspheres Synthesized by a Facile Self-Catalyzing Solvothermal Method for High-Performance Sodium-Ion Battery Anodes.

Yuliang Cao, Hanxi Yang, X. Ai, 2016, ACS applied materials & interfaces.

Building a cycle-stable sulphur cathode by tailoring its redox reaction into a solid-phase conversion mechanism

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2018 .

Ultrathin phyllosilicate nanosheets as anode materials with superior rate performance for lithium ion batteries

Yuliang Cao, D. Yan, B. He, 2018 .

Water-Based Dual-Crosslinked Polymer Binders for High-Energy-Density Lithium-Sulfur Batteries.

Hongbo Zeng, Yonghong Deng, Chaoyang Wang, 2020, ACS applied materials & interfaces.

Pb-sandwiched nanoparticles as anode material for lithium-ion batteries

Jiangfeng Qian, Yuliang Cao, Zhongxue Chen, 2011, Journal of Solid State Electrochemistry.

A green route to synthesize low-cost and high-performance hard carbon as promising sodium-ion battery anodes from sorghum stalk waste

Xiaolin Liu, Yuliang Cao, Xiaoyu Jiang, 2017 .

Suppressing Voltage Fading of Li‐Rich Oxide Cathode via Building a Well‐Protected and Partially‐Protonated Surface by Polyacrylic Acid Binder for Cycle‐Stable Li‐Ion Batteries

Weihua Chen, Yuliang Cao, Hanxi Yang, 2020, Advanced Energy Materials.

Enhanced electrochemical performance of submicron LiCoO2 synthesized by polymer pyrolysis method

Yuliang Cao, Hanxi Yang, X. Ai, 2007 .

A Solid-Phase Conversion Sulfur Cathode with Full Capacity Utilization and Superior Cycle Stability for Lithium-Sulfur Batteries.

Q. Zhang, Yuliang Cao, Hanxi Yang, 2022, Small.

Facile and scalable synthesis of low-cost FeS@C as long-cycle anodes for sodium-ion batteries

Changyu Shen, Chuntai Liu, Dan Yang, 2019, Journal of Materials Chemistry A.

Effect of Eliminating Water in Prussian Blue Cathode for Sodium‐Ion Batteries

Yuliang Cao, S. Dou, Zichao Yan, 2022, Advanced Functional Materials.

Magnesium-Doped Li1.2[Co0.13Ni0.13Mn0.54]O2 for Lithium-Ion Battery Cathode with Enhanced Cycling Stability and Rate Capability.

Yuliang Cao, Hanxi Yang, X. Ai, 2015, ACS applied materials & interfaces.

Green synthesis and stable li-storage performance of FeSi(2)/Si@C nanocomposite for lithium-ion batteries.

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2012, ACS applied materials & interfaces.

An advanced low-cost cathode composed of graphene-coated Na2.4Fe1.8(SO4)3 nanograins in a 3D graphene network for ultra-stable sodium storage

Weihua Chen, Yuliang Cao, Hanxi Yang, 2021 .

Sulfur/carbon nanocomposite-filled polyacrylonitrile nanofibers as a long life and high capacity cathode for lithium–sulfur batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2015 .

Synthesis of Monoclinic Li[Li0.2Mn0.54Ni0.13Co0.13]O2 Nanoparticles by a Layered‐Template Route for High‐Performance Li‐Ion Batteries

Yuliang Cao, Zhongxue Chen, Hanxi Yang, 2013 .

Engineering Al2O3 atomic layer deposition: Enhanced hard carbon-electrolyte interface towards practical sodium ion batteries

Haiyan Lu, Yuliang Cao, Hanxi Yang, 2019, Nano Energy.

Hollow carbon nanofibers as high-performance anode materials for sodium-ion batteries.

Weihua Chen, Jiangfeng Qian, Yuliang Cao, 2019, Nanoscale.

TiO2‐Coated Interlayer‐Expanded MoSe2/Phosphorus‐Doped Carbon Nanospheres for Ultrafast and Ultralong Cycling Sodium Storage

Yuliang Cao, Wenpei Kang, Yunxiao Wang, 2018, Advanced science.

Amorphous CoS nanoparticle/reduced graphene oxide composite as high-performance anode material for sodium-ion batteries

Xiaolin Liu, Yuliang Cao, Hanxi Yang, 2017 .

High capacity, reversible alloying reactions in SnSb/C nanocomposites for Na-ion battery applications.

Wei Wang, Zimin Nie, Jie Xiao, 2012, Chemical communications.

Understanding of the sodium storage mechanism in hard carbon anodes

Yuliang Cao, Hanxi Yang, X. Ai, 2022, Carbon Energy.

High-Capacity Hard Carbon Pyrolyzed from Subbituminous Coal as Anode for Sodium-Ion Batteries

Haiyan Lu, Jiangfeng Qian, Yuliang Cao, 2019, ACS Applied Energy Materials.

Organic Alloy Electrolytes for Thermostable Solid-State Dye-Sensitized Solar Cells

Yuliang Cao, Hanxi Yang, X. Ai, 2014 .

Plastic–polymer composite electrolytes for solid state dye-sensitized solar cells

H. X. Yang, Yuliang Cao, Yan-ping Jiang, 2010 .

Fabrication of belt-like VO2(M)@C core-shell structured composite to improve the electrochemical properties of VO2(M)

Yuliang Cao, Yifu Zhang, Weibing Wu, 2013 .

A Nonflammable Na+‐Based Dual‐Carbon Battery with Low‐Cost, High Voltage, and Long Cycle Life

Yuliang Cao, Hanxi Yang, X. Ai, 2018, Advanced Energy Materials.

An efficient and nonflammable organic phosphate electrolyte for dye-sensitized solar cells

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2009 .

LiOH: A “double-edged” effect toward electrochemical oxidation of Li2O2

Jiawei Wang, Yuliang Cao, Peng Zhang, 2021, Journal of Energy Chemistry.

Boosting rate and cycling performance of K-doped Na3V2(PO4)2F3 cathode for high-energy-density sodium-ion batteries

Peng Li, Weihua Chen, Yuliang Cao, 2021 .

Electrochemical Insight into the Sodium-Ion Storage Mechanism on a Hard Carbon Anode.

Haiyan Lu, Yuliang Cao, Hanxi Yang, 2021, ACS applied materials & interfaces.

In Situ Formation of Co9S8 Nanoclusters in Sulfur-Doped Carbon Foam as a Sustainable and High-Rate Sodium-Ion Anode.

Weihua Chen, Jiangfeng Qian, Yuliang Cao, 2019, ACS applied materials & interfaces.

Microstructure-Dependent Charge/Discharge Behaviors of Hollow Carbon Spheres and its Implication for Sodium Storage Mechanism on Hard Carbon Anodes.

Haiyan Lu, Weihua Chen, Yuliang Cao, 2021, Small.

Understanding and Calibration of Charge Storage Mechanism in Cyclic Voltammetry Curves

Yuliang Cao, Zhongxue Chen, Chunsheng Wang, 2021, Angewandte Chemie.

Understanding and Calibration of Charge Storage Mechanism in Cyclic Voltammetry Curves.

Yuliang Cao, Zhongxue Chen, Chunsheng Wang, 2021, Angewandte Chemie.

Polyaniline hollow nanofibers prepared by controllable sacrifice-template route as high-performance cathode materials for sodium-ion batteries

Haiyan Lu, Yuliang Cao, Hanxi Yang, 2019, Electrochimica Acta.

Coaxial Three-Layered Carbon/Sulfur/Polymer Nanofibers with High Sulfur Content and High Utilization for Lithium-Sulfur Batteries.

Yuliang Cao, Hanxi Yang, X. Ai, 2017, ACS applied materials & interfaces.

Magnesio-mechanochemical reduced SiO for high-performance lithium ion batteries

Hongbo Zeng, Yonghong Deng, Chaoyang Wang, 2018, Journal of Power Sources.

A novel bifunctional thermo-sensitive poly(lactic acid)@poly(butylene succinate) core–shell fibrous separator prepared by a coaxial electrospinning route for safe lithium-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2017 .

Exploring Sodium-Ion Storage Mechanism in Hard Carbons with Different Microstructure Prepared by Ball-Milling Method.

Yunhui Huang, Haiyan Lu, Yuliang Cao, 2018, Small.

High-Voltage and Intrinsically Safe Sodium Metal Batteries Enabled by Nonflammable Fluorinated Phosphate Electrolytes.

Yuliang Cao, Hanxi Yang, X. Ai, 2022, ACS applied materials & interfaces.

Enhanced electrochemical stability of Al-doped LiMn2O4 synthesized by a polymer-pyrolysis method

Yuliang Cao, Hanxi Yang, X. Ai, 2008 .

An Overall Understanding of Sodium Storage Behaviors in Hard Carbons by an “Adsorption‐Intercalation/Filling” Hybrid Mechanism

Yuliang Cao, Hanxi Yang, X. Ai, 2022, Advanced Energy Materials.

A solar rechargeable battery based on the sodium ion storage mechanism with Fe2(MoO4)3 microspheres as anode materials

Xueping Gao, Jiangfeng Qian, Yuliang Cao, 2018 .

An Al-doped high voltage cathode of Na4Co3(PO4)2P2O7 enabling highly stable 4 V full sodium-ion batteries

Yongyao Xia, Yuliang Cao, X. Ai, 2019, Journal of Materials Chemistry A.

A Stable "Rocking-Chair" Zinc-Ion Battery Boosted by Low-Strain Zn3V4(PO4)6 Cathode

M. Ding, Yuliang Cao, Zhongxue Chen, 2022, Nano Energy.

In Situ Plating of Mg Sodiophilic Seeds and Evolving Sodium Fluoride Protective Layers for Superior Sodium Metal Anodes

Yuliang Cao, S. Dou, Qiannan Liu, 2022, Advanced Energy Materials.

Hard carbon anode derived from camellia seed shell with superior cycling performance for sodium-ion batteries

Haiyan Lu, Weihua Chen, Yuliang Cao, 2020, Journal of Physics D: Applied Physics.

Highly Electrochemically-Reversible Mesoporous Na2 FePO4 F/C as Cathode Material for High-Performance Sodium-Ion Batteries.

Weihua Chen, Jiangfeng Qian, Yuliang Cao, 2019, Small.

SnO2-Reduced Graphene Oxide Nanocomposites via Microwave Route as Anode for Sodium-Ion Battery

Yuliang Cao, Hanxi Yang, X. Ai, 2016 .

Electrochemical properties of nano-crystalline LiNi0.5Mn1.5O4 synthesized by polymer-pyrolysis method

Yuliang Cao, Hanxi Yang, X. Ai, 2008 .

Electrochemical properties of stacked-nanoflake Li4Ti5O12 spinel synthesized by a polymer-pyrolysis method

Haiyan Lu, Yuliang Cao, Hanxi Yang, 2014 .

Preparation and electrochemical performance of Sn–Co–C composite as anode material for Li-ion batteries

Jiangfeng Qian, Yuliang Cao, Zhongxue Chen, 2009 .

Extended “Adsorption–Insertion” Model: A New Insight into the Sodium Storage Mechanism of Hard Carbons

Zhaoxiang Wang, Yuliang Cao, Peng Zhang, 2019, Advanced Energy Materials.

High capacity and rate capability of amorphous phosphorus for sodium ion batteries.

Xinping Ai, Jiangfeng Qian, Yuliang Cao, 2013, Angewandte Chemie.

The mechanism of oxygen reduction on MnO2-catalyzed air cathode in alkaline solution

Yuliang Cao, Hanxi Yang, X. Ai, 2003 .

Improvement of the electrochemical properties of V3O7·H2O nanobelts for Li battery application through synthesis of V3O7@C core-shell nanostructured composites

Yuliang Cao, Min Zhou, Yifu Zhang, 2011 .

Micro-nano Cu2Se as a stable and ultralong cycle life anode material for sodium-ion batteries

Yuliang Cao, Haiyan Zhang, Zhenjiang Liu, 2022, International Journal of Hydrogen Energy.

A redox-active polythiophene-modified separator for safety control of lithium-ion batteries

Shi-gang Lu, Yuliang Cao, Hanxi Yang, 2013 .

Preparation and electrochemical characterization of nanocrystalline Li[Li0.12Ni0.32Mn0.56]O2 pyrolyzed from polyacrylate salts

Lihong Yu, H. X. Yang, Yuliang Cao, 2004 .

Nonflammable dual-salt localized high-concentration electrolyte for graphite/LiNi0.8Co0.1Mn0.1O2 lithium-ion batteries: Li+ solvation structure and interphase

Yuliang Cao, X. Ai, Shuai Cao, 2023, Journal of Power Sources.

Synthesis and electrochemical properties of high-voltage LiNi0.5Mn1.5O4 electrode material for Li-ion batteries by the polymer-pyrolysis method

Lihong Yu, Yuliang Cao, Hanxi Yang, 2006 .

A high-loading and cycle-stable solid-phase conversion sulfur cathode using edible fungus slag-derived microporous carbon as sulfur host

Yuliang Cao, Hanxi Yang, X. Ai, 2022, Nano Research.

Na0.91MnO2 with an Extended Layer Structure and Excellent Pseudocapacitive Behavior as a Cathode Material for Sodium-Ion Batteries

Lijun Wu, Yuliang Cao, Hao Li, 2022, ACS Applied Energy Materials.

Improved discharge capacity and suppressed surface passivation of zinc anode in dilute alkaline solution using surfactant additives

Yuliang Cao, Hanxi Yang, X. Ai, 2004 .

Nonflammable Dual-Salt Electrolytes for Graphite/LiNi0.8Co0.1Mn0.1O2 Lithium-Ion Batteries: Li+ Solvation Structure and Electrode/Eelectrolyte Interphase

Yuliang Cao, X. Ai, Shuai Cao, 2022, ACS Applied Energy Materials.

Template-directed synthesis of Co2P/MoSe2 in a N-doped carbon hollow structure for efficient and stable sodium/potassium ion storage

Yuliang Cao, Wenpei Kang, Daofeng Sun, 2021, Nano Energy.

A Molybdenum Polysulfide In-Situ Generated from Ammonium Tetrathiomolybdate for High-Capacity and High-Power Rechargeable Magnesium Battery Cathodes.

Yuliang Cao, Zhongxue Chen, Ting Li, 2022, ACS nano.

High-stable Nonflammable Electrolyte Regulated by Coordination-Number Rule for All-Climate and Safer Lithium-Ion Batteries

H. Chen, Yuliang Cao, Zhongxue Chen, 2022, Energy Storage Materials.

Zero-strain Na4Fe7(PO4)6 as a novel cathode material for sodium-ion batteries.

Yuliang Cao, Zhongxue Chen, Huiming Wang, 2019, Chemical communications.

Revealing the Phase Evolution in Na4FexP4O12+x (2 ≤ x ≤ 4) Cathode Materials

S. Zhang, Changyu Liu, Yuliang Cao, 2022, ACS Energy Letters.

Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries.

Zhenguo Yang, Zimin Nie, Jun Liu, 2011, Physical chemistry chemical physics : PCCP.

Electrooxidation mechanisms and discharge characteristics of borohydride on different catalytic metal surfaces.

Yuliang Cao, Hanxi Yang, X. Ai, 2005, The journal of physical chemistry. B.

High‐Performance Flexible Freestanding Anode with Hierarchical 3D Carbon‐Networks/Fe7S8/Graphene for Applicable Sodium‐Ion Batteries

Changyu Shen, Chuntai Liu, Shizhong Cui, 2019, Advanced materials.

Na4Fe3(PO4)2P2O7/C nanospheres as low-cost, high-performance cathode material for sodium-ion batteries

Li Xu, Xinping Ai, Xiangjun Pu, 2019, Energy Storage Materials.

3D graphene decorated Na4Fe3(PO4)2(P2O7) microspheres as low-cost and high-performance cathode materials for sodium-ion batteries

Xinping Ai, Xiangjun Pu, Zhongxue Chen, 2019, Nano Energy.

Prussian Blue Cathode Materials for Sodium‐Ion Batteries and Other Ion Batteries

Chen Wu, Zi-Feng Ma, Xinping Ai, 2018 .

Improved Electrochemical Performance of Fe-Substituted NaNi0.5Mn0.5O2 Cathode Materials for Sodium-Ion Batteries.

Yuliang Cao, Hanxi Yang, X. Ai, 2015, ACS applied materials & interfaces.

Hydrogen release from hydrolysis of borazane on Pt- and Ni-based alloy catalysts

L. Zhuang, Yuliang Cao, X. Ai, 2008 .

Recent Advances in Conversion-Type Electrode Materials for Post Lithium-Ion Batteries

Yuliang Cao, Zhongxue Chen, Huiming Wang, 2021 .

Facile and reversible digestion and regeneration of zirconium-based metal-organic frameworks

Weihua Chen, Yuliang Cao, Hanxi Yang, 2020, Communications Chemistry.

Emerging Intercalation Cathode Materials for Multivalent Metal‐Ion Batteries: Status and Challenges

Yuliang Cao, Zhongxue Chen, Susu Chen, 2021, Small Structures.

n-Dopable polythiophenes as high capacity anode materials for all-organic Li-ion batteries

Yuliang Cao, X. Ai, R. Zhao, 2013 .

Single-crystal FeFe(CN)6 nanoparticles: a high capacity and high rate cathode for Na-ion batteries

Wenwen Deng, Jiangfeng Qian, Yuliang Cao, 2013 .

Synergistic Na-storage reactions in Sn4P3 as a high-capacity, cycle-stable anode of Na-ion batteries.

Xinping Ai, Jiangfeng Qian, Yuliang Cao, 2014, Nano letters.

A Honeycomb‐Layered Na3Ni2SbO6: A High‐Rate and Cycle‐Stable Cathode for Sodium‐Ion Batteries

Jiwen Feng, Xinping Ai, Yuliang Cao, 2014, Advanced materials.

P2-type Na0.67Mn0.65Fe0.2Ni0.15O2 Cathode Material with High-capacity for Sodium-ion Battery

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2014 .

A low-cost and environmentally benign aqueous rechargeable sodium-ion battery based on NaTi2(PO4)3–Na2NiFe(CN)6 intercalation chemistry

Xinping Ai, Jiangfeng Qian, Yuliang Cao, 2013 .

Low‐Defect and Low‐Porosity Hard Carbon with High Coulombic Efficiency and High Capacity for Practical Sodium Ion Battery Anode

Jun Liu, Haiyan Lu, Yuliang Cao, 2018 .

Electrochromic Metal Oxides: Recent Progress and Prospect

Yonghong Deng, Yuliang Cao, Jianmin Ma, 2018, Advanced Electronic Materials.

Conductive rigid skeleton supported silicon as high-performance Li-ion battery anodes.

G. Graff, Ji‐Guang Zhang, Jun Liu, 2012, Nano letters.

Bridging the academic and industrial metrics for next-generation practical batteries

Jun Lu, Matthew Li, Jun Liu, 2019, Nature Nanotechnology.

Li(+)-conductive polymer-embedded nano-Si particles as anode material for advanced Li-ion batteries.

Yuliang Cao, Hanxi Yang, X. Ai, 2014, ACS applied materials & interfaces.

Reversible 3-Li storage reactions of amorphous phosphorus as high capacity and cycling-stable anodes for Li-ion batteries.

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2012, Chemical communications.

In Situ Generation of Few‐Layer Graphene Coatings on SnO2‐SiC Core‐Shell Nanoparticles for High‐Performance Lithium‐Ion Storage

Jun Liu, Yuliang Cao, Zhongxue Chen, 2012 .

3D Graphene Decorated NaTi2(PO4)3 Microspheres as a Superior High‐Rate and Ultracycle‐Stable Anode Material for Sodium Ion Batteries

Xinping Ai, Jiangfeng Qian, Yuliang Cao, 2016 .

Phosphate Framework Electrode Materials for Sodium Ion Batteries

Xinping Ai, Yuliang Cao, Yuliang Cao, 2017, Advanced science.

High performance TiP2O7 nanoporous microsphere as anode material for aqueous lithium-ion batteries

Yongyao Xia, Yuliang Cao, X. Ai, 2018, Science China Chemistry.

Facile hydrothermal synthesis of vanadium oxides nanobelts by ethanol reduction of peroxovanadium complexes

Yuliang Cao, Yifu Zhang, Weibing Wu, 2013 .

Chitin-Derived Heteroatom-Doped Porous Carbon for High-Performance Room-Temperature Na-S Batteries

Yuliang Cao, X. Ai, Jinping Zhou, 2022, ACS Applied Energy Materials.

A Perylene Diimide Crystal with High Capacity and Stable Cyclability for Na-Ion Batteries.

Wenwen Deng, Jiangfeng Qian, Yuliang Cao, 2015, ACS applied materials & interfaces.

Self-Healing Double-Cross-Linked Supramolecular Binders of a Polyacrylamide-Grafted Soy Protein Isolate for Li–S Batteries

Yonghong Deng, Chaoyang Wang, Yuliang Cao, 2020 .

Reversible Sodium Ion Insertion in Single Crystalline Manganese Oxide Nanowires with Long Cycle Life.

Jun Liu, Z. Yang, D. Choi, 2011 .

Reversible Temperature-Responsive Cathode for Thermal Protection of Lithium-Ion Batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2022, ACS Applied Energy Materials.

A tin(II) sulfide–carbon anode material based on combined conversion and alloying reactions for sodium-ion batteries

Haiyan Lu, Jiangfeng Qian, Yuliang Cao, 2014 .

Understanding Voltage Decay in Lithium-Rich Manganese-Based Layered Cathode Materials by Limiting Cutoff Voltage.

Yuliang Cao, Zhongxue Chen, Hanxi Yang, 2016, ACS applied materials & interfaces.

Manipulating Adsorption–Insertion Mechanisms in Nanostructured Carbon Materials for High‐Efficiency Sodium Ion Storage

Jun Liu, Shen Qiu, Jiwen Feng, 2017 .

Ion‐Migration Mechanism: An Overall Understanding of Anionic Redox Activity in Metal Oxide Cathodes of Li/Na‐Ion Batteries

Yuliang Cao, X. Ai, Biao Li, 2022, Advanced materials.

Atomically dispersed Ni induced by ultrahigh N-doped carbon enables stable sodium storage

P. Yan, Shunfang Li, Weihua Chen, 2021, Chem.

Amorphous NaVOPO 4 as a High-Rate and Ultrastable Cathode Material for Sodium-Ion Batteries

Weihua Chen, Yuliang Cao, Hanxi Yang, 2020 .

Ultralow‐Strain Zn‐Substituted Layered Oxide Cathode with Suppressed P2–O2 Transition for Stable Sodium Ion Storage

Yang Ren, Ling Huang, Yuliang Cao, 2020, Advanced Functional Materials.

A Fully Sodiated NaVOPO4 with Layered Structure for High-Voltage and Long-Lifespan Sodium-Ion Batteries

Xianghui Xiao, J. Xie, Yang Ren, 2018 .

Recent Progress in Iron-Based Electrode Materials for Grid-Scale Sodium-Ion Batteries.

Xinping Ai, Zhongxue Chen, Yuliang Cao, 2018, Small.

Routes to High Energy Cathodes of Sodium‐Ion Batteries

Yunhui Huang, Yuliang Cao, Hanxi Yang, 2016 .

Hierarchical Carbon Framework Wrapped Na3V2(PO4)3 as a Superior High‐Rate and Extended Lifespan Cathode for Sodium‐Ion Batteries

Xinping Ai, Yuliang Cao, Yuliang Cao, 2015, Advanced materials.

High-Performance Olivine NaFePO4 Microsphere Cathode Synthesized by Aqueous Electrochemical Displacement Method for Sodium Ion Batteries.

Xinping Ai, Yuliang Cao, Yuliang Cao, 2015, ACS applied materials & interfaces.

Mesoporous amorphous FePO4 nanospheres as high-performance cathode material for sodium-ion batteries.

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2014, Nano letters.

Covalently Bonded Silicon/Carbon Nanocomposite as Cycle-Stable Anode for Li Ion Batteries.

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2020, ACS applied materials & interfaces.

Facile synthesis and stable lithium storage performances of Sn- sandwiched nanoparticles as a high capacity anode material for rechargeable Li batteries

Jiangfeng Qian, Yuliang Cao, Zhongxue Chen, 2010 .

Transition metal oxides based on conversion reaction for sodium-ion battery anodes

Yuliang Cao, Zhongxue Chen, Xianchun Deng, 2018, Materials Today Chemistry.

High Capacity and Cycle-Stable Hard Carbon Anode for Nonflammable Sodium-Ion Batteries.

Yongyao Xia, Yuliang Cao, Hanxi Yang, 2018, ACS applied materials & interfaces.

An All-solid-state and All-organic Sodium-ion Battery based on Redox-active Polymers and Plastic Crystal Electrolyte

Wenwen Deng, Yuliang Cao, Hanxi Yang, 2015 .

Self-doped polypyrrole with ionizable sodium sulfonate as a renewable cathode material for sodium ion batteries.

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2013, Chemical communications.

A low cost, all-organic Na-ion Battery Based on Polymeric Cathode and Anode

Jiwen Feng, Xinping Ai, Jiangfeng Qian, 2013, Scientific Reports.

n-Type redox behaviors of polybithiophene and its implications for anodic Li and Na storage materials

Yuliang Cao, Hanxi Yang, X. Ai, 2012 .

An aniline-nitroaniline copolymer as a high capacity cathode for Na-ion batteries

Limin Zhu, Ruirui Zhao, Xinping Ai, 2012 .

High capacity Na-storage and superior cyclability of nanocomposite Sb/C anode for Na-ion batteries.

Xinping Ai, Jiangfeng Qian, Yuliang Cao, 2012, Chemical communications.

A Membrane-Free and Energy-Efficient Three-step Chlor-Alkali Electrolysis with Higher Purity NaOH Production.

Weihua Chen, Yuliang Cao, Hanxi Yang, 2019, ACS applied materials & interfaces.

Developments and Perspectives on Emerging High-Energy-Density Sodium-Metal Batteries

Weihua Chen, Yuliang Cao, Hanxi Yang, 2019, Chem.

Recent Progress in Rechargeable Sodium-Ion Batteries: toward High-Power Applications.

Dong Zhao, Huiming Wang, Xinping Ai, 2019, Small.

Highly Crystallized Na₂CoFe(CN)₆ with Suppressed Lattice Defects as Superior Cathode Material for Sodium-Ion Batteries.

Jiulin Wang, Jiangfeng Qian, Yuliang Cao, 2016, ACS applied materials & interfaces.

Sb–C nanofibers with long cycle life as an anode material for high-performance sodium-ion batteries

Fayuan Wu, Xiaohong Hu, Feng Pei, 2014 .

An ultrahigh-areal-capacity SiOx negative electrode for lithium ion batteries

Yonghong Deng, Chaoyang Wang, Yuliang Cao, 2020 .

A Novel Highly Durable Carbon/Silver/Silver Chloride Composite Electrode for High-Definition Transcranial Direct Current Stimulation

Y. Duan, Guangli Li, Yuliang Cao, 2021, Nanomaterials.

Hard Carbon Fibers Pyrolyzed from Wool as High-Performance Anode for Sodium-Ion Batteries

Xiaolin Liu, Yuliang Cao, Hanxi Yang, 2016 .

In situ N-doped carbon modified (Co0.5Ni0.5)9S8 solid-solution hollow spheres as high-capacity anodes for sodium-ion batteries

Yuliang Cao, Wenpei Kang, Daofeng Sun, 2019, Journal of Materials Chemistry A.

Novel Alkaline Zn/Na0.44MnO2 Dual-Ion Battery with a High Capacity and Long Cycle Lifespan.

Xinping Ai, Xiangjun Pu, Xinhe Zhang, 2018, ACS applied materials & interfaces.

Optimization of mesoporous carbon structures for lithium–sulfur battery applications

Jun Liu, Zimin Nie, Jie Xiao, 2011 .

Perylenediimide dyes as a cheap and sustainable cathode for lithium ion batteries

Yuliang Cao, Xiaolin Liu, Wenwen Deng, 2016 .

Symmetric Sodium-Ion Capacitor Based on Na0.44MnO2 Nanorods for Low-Cost and High-Performance Energy Storage.

Xinping Ai, Xiangjun Pu, Yongyao Xia, 2018, ACS applied materials & interfaces.

A solar rechargeable flow battery based on photoregeneration of two soluble redox couples.

Xueping Gao, Yuliang Cao, Hanxi Yang, 2013, ChemSusChem.

Synthesis and electrochemical behaviors of layered Na0.67[Mn0.65Co0.2Ni0.15]O2 microflakes as a stable cathode material for sodium-ion batteries

Wei He, Fayuan Wu, Feng Pei, 2013 .

Monoclinic α‐NaVOPO4 as cathode materials for sodium‐ions batteries: Experimental and DFT investigation

Yuliang Cao, E. Iffer, M. Belaiche, 2020, International Journal of Energy Research.

Achieving Desirable Initial Coulombic Efficiencies and Full Capacity Utilization of Li‐Ion Batteries by Chemical Prelithiation of Graphite Anode

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2021, Advanced Functional Materials.

Design Strategies for High‐Voltage Aqueous Batteries

Yuliang Cao, Zhongxue Chen, Fei Xu, 2021, Small Structures.

Enhanced high-rate capability and cycling stability of Na-stabilized layered Li1.2[Co0.13Ni0.13Mn0.54]O2 cathode material

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2013 .

An All-Phosphate and Zero-Strain Sodium-Ion Battery Based on Na3V2(PO4)3 Cathode, NaTi2(PO4)3 Anode, and Trimethyl Phosphate Electrolyte with Intrinsic Safety and Long Lifespan.

Yuliang Cao, Hanxi Yang, X. Ai, 2017, ACS applied materials & interfaces.

Polytriphenylamine: A high power and high capacity cathode material for rechargeable lithium batteries

H. X. Yang, Jinkui Feng, Yuliang Cao, 2008 .

Enabling an intrinsically safe and high‐energy‐density 4.5 V‐class Li‐ion battery with nonflammable electrolyte

Weihua Chen, Yuliang Cao, Hanxi Yang, 2020 .

Bis(2,2,2-Trifluoroethyl) Ethylphosphonate as Novel High-efficient Flame Retardant Additive for Safer Lithium-ion Battery

Yuliang Cao, Hanxi Yang, X. Ai, 2015 .

TiO2‐Coated Multilayered SnO2 Hollow Microspheres for Dye‐Sensitized Solar Cells

Yangxuan Xiao, Jiangfeng Qian, Yuliang Cao, 2009 .

Fe2O3 amorphous nanoparticles/graphene composite as high-performance anode materials for lithium-ion batteries

Xiaolin Liu, Yuliang Cao, Xiaoyu Jiang, 2017 .

Low Defect FeFe(CN)6 Framework as Stable Host Material for High Performance Li-Ion Batteries.

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2016, ACS applied materials & interfaces.

A Novel Fe-defect Induced Pure-phase Na4Fe2.91(PO4)2P2O7 Cathode Material with High Capacity and Ultra-long Lifetime for Low-cost Sodium-ion Batteries

Yuliang Cao, Zhongxue Chen, Hanxi Yang, 2021, Nano Energy.

Superior high rate capability of tin phosphide used as high capacity anode for aqueous primary batteries

Wei Zhou, Yuliang Cao, X. Ai, 2006 .

Ethylene Carbonate‐Free Propylene Carbonate‐Based Electrolytes with Excellent Electrochemical Compatibility for Li‐Ion Batteries through Engineering Electrolyte Solvation Structure

Weihua Chen, Yuliang Cao, Hanxi Yang, 2021, Advanced Energy Materials.

Improved sodium-storage performance of stannous sulfide@reduced graphene oxide composite as high capacity anodes for sodium-ion batteries

Haiyan Lu, Yuliang Cao, Hanxi Yang, 2015 .

Improved electrochemical performances of nanocrystalline Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material for Li-ion batteries

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2012 .

Template-Free Hydrothermal Synthesis of Nanoembossed Mesoporous LiFePO4 Microspheres for High-Performance Lithium-Ion Batteries

Min Zhou, Xinping Ai, Jiangfeng Qian, 2010 .

Effective Chemical Prelithiation Strategy for Building a Silicon/Sulfur Li-Ion Battery

Bo Wang, Yongfeng Pu, Xinping Ai, 2019, ACS Energy Letters.

A Safer Sodium‐Ion Battery Based on Nonflammable Organic Phosphate Electrolyte

Yuliang Cao, Hanxi Yang, X. Ai, 2016, Advanced science.

Energetic Aqueous Rechargeable Sodium‐Ion Battery Based on Na2CuFe(CN)6‐NaTi2 (PO4)3 Intercalation Chemistry.

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2014 .

Advancing knowledge of electrochemically generated lithium microstructure and performance decay of lithium ion battery by synchrotron X-ray tomography

M. Winter, I. Manke, A. Hilger, 2019, Materials Today.

Low‐Cost Zinc Substitution of Iron‐Based Prussian Blue Analogs as Long Lifespan Cathode Materials for Fast Charging Sodium‐Ion Batteries

Yuliang Cao, Jiazhao Wang, Shixue Dou, 2022, Advanced Functional Materials.

A Green and Scalable Synthesis of Na3Fe2(PO4)P2O7/rGO Cathode for High‐Rate and Long‐Life Sodium‐Ion Batteries

Yuliang Cao, Zhongxue Chen, Huiming Wang, 2021, Small methods.

Sulfur-based electrodes via multi-electron reactions for room-temperature sodium-ion storage.

Yuliang Cao, Hanxi Yang, X. Ai, 2019, Angewandte Chemie.

Sodium Storage Mechanism: Extended “Adsorption–Insertion” Model: A New Insight into the Sodium Storage Mechanism of Hard Carbons (Adv. Energy Mater. 32/2019)

Zhaoxiang Wang, Yuliang Cao, Peng Zhang, 2019, Advanced Energy Materials.

Improved Sodium Storage Performance of Na0.44MnO2 Cathode at a High Temperature by Al2O3 Coating

Yuliang Cao, Zhongxue Chen, Shuangyue Liu, 2019, Acta Physico-Chimica Sinica.

Sodium-Ion Batteries: Prussian Blue Cathode Materials for Sodium-Ion Batteries and Other Ion Batteries (Adv. Energy Mater. 17/2018)

Yunhui Huang, Jiangfeng Qian, Yuliang Cao, 2018, Advanced Energy Materials.

High Capacity and Rate Capability of Amorphous Phosphorus for Sodium Ion BatterieslSUPg†l/SUPg

Xinping Ai, Jiangfeng Qian, Yuliang Cao, 2013 .

Understanding the Electrochemical Compatibility and Reaction Mechanism on Na Metal and Hard Carbon Anodes of PC-Based Electrolytes for Sodium-Ion Batteries.

Haiyan Lu, Yuliang Cao, Hanxi Yang, 2018, ACS applied materials & interfaces.

A temperature-sensitive poly(3-octylpyrrole)/carbon composite as a conductive matrix of cathodes for building safer Li-ion batteries

Weixiao Ji, Feng Wang, Jiangfeng Qian, 2019, Energy Storage Materials.

A Novel Dendrite-Free Lithium Metal Anode via Oxygen and Boron Codoped Honeycomb Carbon Skeleton.

Yuliang Cao, H. Shao, Haiyan Zhang, 2022, Small.

Tunable Electrocatalytic Behavior of Sodiated MoS2 Active Sites toward Efficient Sulfur Redox Reactions in Room‐Temperature Na–S Batteries

S. Dou, Huakun Liu, Yuliang Cao, 2021, Advanced materials.

Sulfur-Based Electrodes that Function via Multielectron Reactions for Room-Temperature Sodium-Ion Storage

Yuliang Cao, Hanxi Yang, X. Ai, 2020 .

Surface-oriented and nanoflake-stacked LiNi0.5Mn1.5O4 spinel for high-rate and long-cycle-life lithium ion batteries

Kai Xie, Xiaobin Hong, Yuliang Cao, 2012 .

Designing Advanced Electrolytes for Lithium Secondary Batteries Based on the Coordination Number Rule

Yuliang Cao, Hanxi Yang, X. Ai, 2021, ACS Energy Letters.

Toward wide‐temperature electrolyte for lithium–ion batteries

Yuliang Cao, Zhongxue Chen, X. Ai, 2022, Battery Energy.

Enabling electrochemical compatibility of non-flammable phosphate electrolytes for lithium-ion batteries by tuning their molar ratios of salt to solvent.

Weihua Chen, Yuliang Cao, Hanxi Yang, 2020, Chemical communications.

Dimethyl methyl phosphate : A new nonflammable electrolyte solvent for lithium-ion batteries

H. X. Yang, Jinkui Feng, Yuliang Cao, 2008 .

Nanospherical-Like Manganese Monoxide/Reduced Graphene Oxide Composite Synthesized by Electron Beam Radiation as Anode Material for High-Performance Lithium-Ion Batteries

Xiaolin Liu, Yuliang Cao, Hanxi Yang, 2016 .

Aqueous Rechargeable Sodium-Ion Batteries: From Liquid to Hydrogel

Wei Chen, Yuliang Cao, Mingrui Yang, 2022, Batteries.

High Rate, Long Lifespan LiV3 O8 Nanorods as a Cathode Material for Lithium-Ion Batteries.

Yuliang Cao, Zhongxue Chen, Hanxi Yang, 2017, Small.

Surface-modified graphite as an improved intercalating anode for lithium-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2003 .

Suppression of Dendritic Lithium Growth by in Situ Formation of a Chemically Stable and Mechanically Strong Solid Electrolyte Interphase.

Yangxing Li, Jiangfeng Qian, Yuliang Cao, 2018, ACS applied materials & interfaces.

Possible use of non-flammable phosphonate ethers as pure electrolyte solvent for lithium batteries

H. X. Yang, Jinkui Feng, Yuliang Cao, 2008 .

Electrospun TiO2/C Nanofibers As a High-Capacity and Cycle-Stable Anode for Sodium-Ion Batteries.

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2016, ACS applied materials & interfaces.

Dual Core-Shell Structured Si@SiOx@C Nanocomposite Synthesized via a One-Step Pyrolysis Method as a Highly Stable Anode Material for Lithium-Ion Batteries.

Daotan Liu, Jiangfeng Qian, Yuliang Cao, 2016, ACS applied materials & interfaces.

Controlled synthesis and electrochemical properties of vanadium oxides with different nanostructures

Yuliang Cao, Min Zhou, Yifu Zhang, 2012, Bulletin of Materials Science.

A Honeycomb‐Layered Na3Ni2SbO6: A High‐Rate and Cycle‐Stable Cathode for Sodium‐Ion Batteries.

Yuliang Cao, Hanxi Yang, X. Ai, 2014 .

Engineering Peculiar Cathode Electrolyte Interphase toward Sustainable and High‐Rate Li–S Batteries

Yuliang Cao, X. Ai, Xiangjiang Wu, 2023, Advanced Energy Materials.

Safer lithium ion batteries based on nonflammable electrolyte

Yuliang Cao, Hanxi Yang, X. Ai, 2015 .

Tri-(4-methoxythphenyl) phosphate: A new electrolyte additive with both fire-retardancy and overcharge protection for Li-ion batteries

Jinkui Feng, Yuliang Cao, X. Ai, 2008 .

Novel Sodium–Poly(tartaric acid)Borate-Based Single-Ion Conducting Polymer Electrolyte for Sodium–Metal Batteries

Li Yang, Haiyan Lu, Zhihong Liu, 2020 .

Copper Tetraselenophosphate Cathode for Rechargeable Magnesium Batteries: A Redox-Active Polyatomic Anion Strategy to Design the Cathode Material

Yuliang Cao, Ting Li, Dong-Qing Tao, 2023, Chemistry of Materials.

AlF3-Modified carbon nanofibers as a multifunctional 3D interlayer for stable lithium metal anodes.

Jiulin Wang, Yuliang Cao, Hanxi Yang, 2018, Chemical communications.

Enhanced cycling stability of antimony anode by downsizing particle and combining carbon nanotube for high-performance sodium-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2020 .

Electrochemical properties and morphological evolution of pitaya-like Sb@C microspheres as high-performance anode for sodium ion batteries

Haiyan Lu, Yuliang Cao, Hanxi Yang, 2015 .

Synthesis and electrochemical characterization of carbon-coated nanocrystalline LiFePO4 prepared by polyacrylates-pyrolysis route

Lihong Yu, Yuliang Cao, X. Ai, 2007 .

Nanophase ZnV2O4 as stable and high capacity Li insertion electrode for Li-ion battery

Yuliang Cao, Hanxi Yang, X. Ai, 2015 .

W‐Doping Induced Efficient Tunnel‐to‐Layered Structure Transformation of Na0.44Mn1‐xWxO2: Phase Evolution, Sodium‐Storage Properties, and Moisture Stability

Qingyu Li, Yuliang Cao, Hanxi Yang, 2023, Advanced Energy Materials.

Novel Ceramic-Grafted Separator with Highly Thermal Stability for Safe Lithium-Ion Batteries.

Yuliang Cao, Hanxi Yang, X. Ai, 2017, ACS applied materials & interfaces.

Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries

Ji‐Guang Zhang, Jun Liu, K. Han, 2018, Nature Energy.

In Situ Generation of Few‐Layer Graphene Coatings on SnO2‐SiC Core‐Shell Nanoparticles for High‐Performance Lithium‐Ion Storage (Adv. Energy Mater. 1/2012)

Jun Liu, Yuliang Cao, Zhongxue Chen, 2012 .

Graphene-supported TiO2 nanospheres as a high-capacity and long-cycle life anode for sodium ion batteries

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2016 .

A Bifunctional Fluorophosphate Electrolyte for Safer Sodium-Ion Batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2018, iScience.

Sodium Ion Batteries: 3D Graphene Decorated NaTi2(PO4)3 Microspheres as a Superior High-Rate and Ultracycle-Stable Anode Material for Sodium Ion Batteries (Adv. Energy Mater. 19/2016)

Yunhui Huang, Jiangfeng Qian, Yuliang Cao, 2016 .

Reversible Li and Na storage behaviors of perylenetetracarboxylates as organic anodes for Li- and Na-ion batteries

Yuliang Cao, X. Ai, R. Zhao, 2013 .

Building a Thermal Shutdown Cathode for Li‐Ion Batteries Using Temperature‐Responsive Poly(3‐Dodecylthiophene)

Yuliang Cao, Hanxi Yang, X. Ai, 2020, Energy Technology.

Na 3 V 2 (PO 4 ) 3 /C nanocomposite synthesized via pre-reduction process as high-performance cathode material for sodium-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2015 .

Fe(CN)6−4-doped polypyrrole: a high-capacity and high-rate cathode material for sodium-ion batteries

Limin Zhu, Ruirui Zhao, Min Zhou, 2012 .

Activated iridium oxide films fabricated by asymmetric pulses for electrical neural microstimulation and recording

Yuliang Cao, Yanwen Y Duan, Yuliang Cao, 2008 .

Identifying the Synergistic Na+/Zn2+ Co-Intercalation Mechanism for Boosting Electrochemical Performance of Na4Fe3(PO4)2P2O7 in Zn-Ion Batteries

Yuliang Cao, Zhongxue Chen, Xiangjun Pu, 2023, ACS Materials Letters.

Improved rate capability of the conducting functionalized FTO-coated Li-[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material for Li-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2015 .

Well-defined Na2Zn3[Fe(CN)6]2 nanocrystals as a low-cost and cycle-stable cathode material for Na-ion batteries

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2019, Electrochemistry Communications.

A solar storable fuel cell with efficient photo-degradation of organic waste for direct electricity generation

Xueping Gao, Yuliang Cao, Hanxi Yang, 2016 .

A Highly Thermostable Ceramic-Grafted Microporous Polyethylene Separator for Safer Lithium-Ion Batteries.

Yuliang Cao, Hanxi Yang, X. Ai, 2015, ACS applied materials & interfaces.

A controllable thermal-sensitivity separator with an organic–inorganic hybrid interlayer for high-safety lithium-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2021 .

Molecular Adsorption‐Induced Interfacial Solvation Regulation to Stabilize Graphite Anode in Ethylene Carbonate‐Free Electrolytes

Yuliang Cao, Hanxi Yang, X. Ai, 2023, Advanced Functional Materials.

An all-vanadium aqueous lithium ion battery with high energy density and long lifespan

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2019, Energy Storage Materials.

Will vanadium-based electrode materials become the future choice for metal-ion batteries?

M. Ding, Yuliang Cao, Zhongxue Chen, 2022, ChemSusChem.

The underlying mechanism for reduction stability of organic electrolytes in lithium secondary batteries†

Yuliang Cao, Hanxi Yang, X. Ai, 2021, Chemical science.

Revealing the structural chemistry in Na6-2xFex(SO4)3 (1.5 ≤ x ≤ 2.0) for low-cost and high-performance sodium-ion batteries.

S. Zhang, Weihua Chen, Yuliang Cao, 2023, Science Bulletin.

Poly(3-butylthiophene)-based positive-temperature-coefficient electrodes for safer lithium-ion batteries

Shi-gang Lu, Yuliang Cao, Hanxi Yang, 2016 .

A polytriphenylamine-modified separator with reversible overcharge protection for 3.6 V-class lithium-ion battery

H. X. Yang, Yuliang Cao, X. Ai, 2009 .

Diphenylamine: A safety electrolyte additive for reversible overcharge protection of 3.6 V-class lithium ion batteries

H. X. Yang, Jinkui Feng, Yuliang Cao, 2008 .

A polyethylene microsphere-coated separator with rapid thermal shutdown function for lithium-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2020, Journal of Energy Chemistry.

Organic conjugated polyanthraquinonylimide cathodes for rechargeable magnesium batteries

Yuliang Cao, Dong Chen, Yiyuan Ding, 2022, Journal of Materials Chemistry A.

Facile preparation and electrochemical characterization of poly (4-methoxytriphenylamine)-modified separator as a self-activated potential switch for lithium ion batteries

Shi-gang Lu, Yuliang Cao, Hanxi Yang, 2013 .

An electrolyte additive for thermal shutdown protection of Li-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2012 .

Conductive rigid skeleton supported silicon as high-performance Li-ion battery anodes.

G. Graff, Ji‐Guang Zhang, Jun Liu, 2012, Nano letters.

High capacity, reversible alloying reactions in SnSb/C nanocomposites for Na-ion battery applications.

Jun Liu, Jie Xiao, Z. Nie, 2012, Chemical communications.

Graphene-Scaffolded Na3V2(PO4)3 Microsphere Cathode with High Rate Capability and Cycling Stability for Sodium Ion Batteries.

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2017, ACS applied materials & interfaces.

An all-organic rechargeable battery using bipolar polyparaphenylene as a redox-active cathode and anode.

Yuliang Cao, Hanxi Yang, X. Ai, 2013, Chemical communications.

Reversible Sodium Ion Insertion in Single Crystalline Manganese Oxide Nanowires with Long Cycle Life

Jun Liu, Z. Yang, D. Choi, 2011, Advanced materials.

High Capacity and Cycle-Stable Hard Carbon Anode for Nonflammable Sodium-Ion Batteries.

Yongyao Xia, Yuliang Cao, Hanxi Yang, 2018, ACS applied materials & interfaces.

Enthalpy‐Driven Room‐Temperature Superwetting of Liquid Na–K Alloy as Flexible and Dendrite‐Free Anodes

Yuliang Cao, S. Dou, Yun‐Xiao Wang, 2023, Advanced Functional Materials.

Mesoporous amorphous FePO4 nanospheres as high-performance cathode material for sodium-ion batteries.

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2014, Nano letters.

Highly Crystallized Na₂CoFe(CN)₆ with Suppressed Lattice Defects as Superior Cathode Material for Sodium-Ion Batteries.

Jiulin Wang, Jiangfeng Qian, Yuliang Cao, 2016, ACS applied materials & interfaces.

Surface-engineering enhanced sodium storage performance of Na3V2(PO4)3 cathode via in-situ self-decorated conducting polymer route

Jiangfeng Qian, Yuliang Cao, Hanxi Yang, 2017, Science China Chemistry.

Exploring Sodium-Ion Storage Mechanism in Hard Carbons with Different Microstructure Prepared by Ball-Milling Method.

Yunhui Huang, Haiyan Lu, Yuliang Cao, 2018, Small.

Recent Developments in Cathode Materials for Na Ion Batteries

Yuliang Cao, Zhongxue Chen, Hanxi Yang, 2016 .

A novel Na8Fe5(SO4)9@rGO cathode material with high rate capability and ultra-long lifespan for low-cost sodium-ion batteries

Yuliang Cao, Hanxi Yang, X. Ai, 2023, eScience.

Template synthesis of mesoporous Li2MnSiO4@C composite with improved lithium storage properties

Yuliang Cao, Zhongxue Chen, Hanxi Yang, 2018, Electrochimica Acta.

A Perylene Diimide Crystal with High Capacity and Stable Cyclability for Na-Ion Batteries.

Wenwen Deng, Jiangfeng Qian, Yuliang Cao, 2015, ACS applied materials & interfaces.

Poly(vinyl alcohol)/poly(acrylic acid) hydrogel coatings for improving electrode-neural tissue interface.

Yanwen Y Duan, Yuliang Cao, Hanxi Yang, 2009, Biomaterials.

Understanding the Electrochemical Compatibility and Reaction Mechanism on Na Metal and Hard Carbon Anodes of PC-Based Electrolytes for Sodium-Ion Batteries.

Haiyan Lu, Yuliang Cao, Hanxi Yang, 2018, ACS applied materials & interfaces.