J. Gong

发表

Glass fiber fabric mat as the separator for lithium-ion battery with high safety performance

Hui Wu, W. Pan, Xi Luo, 2015, Ionics.

Strength characteristics of toughened ceramics containing contact-induced small surface cracks

J. Gong, Z. Guan, 2003 .

Characterization of R-curve behavior in Si3N4-based ceramics

J. Gong, Z. Guan, 2001 .

Weibull modulus of fracture strength of toughened ceramics subjected to small-scale contacts

J. Gong, W. Si, Z. Guan, 2001 .

Crack-location-dependent R-curve behavior in Si3N4

J. Gong, Z. Guan, 2000 .

R-curve behavior of indentation cracks in silicon nitride based ceramic composite

J. Gong, Z. Guan, Jianjun Wu, 1994 .

A universal function for the description of nanoindentation unloading data: Case study on soda-lime glass

J. Gong, B. Deng, D. Jiang, 2020 .

Nanoindentation Characterization of the Hardness of Zirconia Dental Ceramics

J. Gong, L. Shao, D. Jiang, 2013 .

On the efficiency of the "effective truncation length" of indenter tip in mechanical property determination with nanoindentation tests

J. Gong, B. Deng, D. Jiang, 2020 .

Analysis of continuous stiffness data measured during nanoindentation of titanium films on glass substrate

Zhi-qiang Fu, Cheng-biao Wang, H. Miao, 2011 .

On the local crack resistance of Al2O3–TiC composites evaluated by direct indentation method

J. Gong, Z. Guan, Zhe Zhao, 2001 .

Preparation of Ni/YSZ materials for SOFC anodes by buffer-solution method

J. Gong, Zhongtai Zhang, Yunfa Chen, 2001 .

Enhancement of the ionic conductivity of mixed calcia/yttria stabilized zirconia

J. Gong, Zilong Tang, Zhongtai Zhang, 2000 .

VARIATION OF THE POWER LAW EXPONENTS IN THE ANALYSIS OF UNIVERSAL DYNAMIC RESPONSE

J. Gong, Weiwei Ju, Tongwei Li, 2009 .

On the Grain Size Distribution of MnO Doped ZnO Ceramics

Shu Ai Li, J. Gong, D. Liu, 2007 .

Analysis of the indentation size effect on the apparent hardness for ceramics

J. Gong, Z. Guan, Jianjun Wu, 1999 .

Variation in the indentation toughness of silicon nitride

J. Gong, Z. Guan, Junqiu Wang, 2002 .

Statistical variability in the indentation toughness of TiCN particle reinforced Al2O3 composite

Yang Yang, H. Miao, J. Gong, 2001 .

Statistical analysis of fracture toughness of soda-lime glass determined by indentation

J. Gong, Yufeng Chen, Chunyan Li, 2001 .

Strength/crack-size relationship for Knoop-indented bending specimens and its application to silicon nitride ceramics

J. Gong, Z. Guan, 1998 .

Influence of thickness on the electrical conductivity of YSZ electrolytes

Wei Zhao, J. Gong, I. Kim, 2010 .

Grain-boundary effect in zirconia stabilized with yttria and calcia by electrical measurements

J. Gong, Zilong Tang, Zhongtai Zhang, 2003 .

Temperature-dependence of the lattice conductivity of mixed calcia/yttria-stabilized zirconia

J. Gong, Zilong Tang, Zhongtai Zhang, 2002 .

Lithium-Ion Battery Cycling for Magnetism Control.

Hui Wu, Xi Luo, J. Gong, 2016, Nano letters.

Study on a new, environmentally benign method and its feasibility of preparing nanometer zirconia powder

Jianghong Gong, Zilong Tang, J. Gong, 2000 .

On the energy balance model for conventional Vickers microhardness testing of brittle ceramics

J. Gong, 2000 .

Effect of TiC particle size on the toughness characteristics of Al2O3–TiC composites

H. Miao, J. Gong, Z. Guan, 2001 .

An energy-balance analysis for the size effect in low-load hardness testing

J. Gong, Ying Li, 2000 .

Effect of metallic binder content on the microhardness of TiCN-based cermets

H. Miao, J. Gong, Zhe Zhao, 2003 .

Compositional dependence of hardness of (Ce,Y)-TZP/Al2O3 composites

H. Miao, J. Gong, B. Hu, 2004 .

Load dependence of the apparent hardness of silicon nitride in a wide range of loads

J. Gong, Z. Guan, Jianjun Wu, 1998 .

High-Performance Ceramics IX

J. Gong, W. Pan, 2016 .

Sol–gel synthesis of mesoporous spherical zirconia

Hui Wu, Xi Luo, J. Gong, 2015 .

ac Impedance Study of Zirconia Doped with Yttria and Calcia

J. Gong, Zilong Tang, Zhongtai Zhang, 2004 .

Effect of porosity on the microhardness testing of brittle ceramics: A case study on the system of NiO-ZrO2

J. Gong, Qi Tang, 2013 .

Examination of the indentation size effect in low-load vickers hardness testing of ceramics

Jianghong Gong, J. Gong, Jianjun Wu, 1999 .

Comment on “Measurement of hardness on traditional ceramics”, H. Kim and T. Kim, J. Eur. Ceram. Soc., 22, 1437–1445 (2002)

J. Gong, 2003 .

Load-dependence of the measured hardness of Ti(C,N)-based cermets

H. Miao, J. Gong, Z. Guan, 2001 .

Load dependence of low-load Knoop hardness in ceramics: a modified PSR model

J. Gong, Z. Guan, 2001 .

Load-dependence of Knoop hardness of Al2O3-TiC composites

H. Miao, J. Gong, Z. Guan, 2000 .

On the description of indentation size effect in hardness testing for ceramics: Analysis of the nanoindentation data

H. Miao, J. Gong, Z. Peng, 2004 .

Influence of TiC particle size on the load-independent hardness of Al2O3–TiC composites

J. Gong, Yun Wan, 2003 .

Indentation toughness of ceramics: A modified approach

J. Gong, Z. Guan, Junqiu Wang, 2002 .

Description of the indentation size effect in hot-pressed silicon-nitride-based ceramics

J. Gong, Z. Guan, Jianjun Wu, 1998 .

Determination of the mechanical behavior of lithium disilicate glass ceramics by nanoindentation & scanning probe microscopy

J. Gong, L. Yin, D. Jiang, 2014 .

Nanoindentation characterization of tetragonal zirconia polycrystalline implanted by titanium ions with MEVVA sources

J. Gong, Zhijian Peng, D. Jiang, 2014 .

Effect of microcracking on the energy-balance relationship for hardness testing of ceramics

J. Gong, Z. Guan, 2001 .

Effect of load-dependence of hardness on indentation toughness determination for soda-lime glass

J. Gong, W. Si, Z. Guan, 2001 .

Effect of TiC-particle size on sliding wear of TiC particulate reinforced alumina composites

H. Miao, J. Gong, Zhe Zhao, 2002 .

Effect of peak load on the determination of hardness and Young's modulus of hot-pressed Si3N4 by nanoindentation

H. Miao, J. Gong, L. Qi, 2003 .

Indentation toughness of ceramics: a statistical analysis

J. Gong, 2002 .

Microstructural dependence of electrical conductivity of (ZrO2)0.90–(Y2O3)0.04–(CaO)0.06 solid electrolyte

J. Gong, Zilong Tang, Zhongtai Zhang, 2000 .

Ionic conductivity in the ternary system (ZrO2)1−0.08x−0.12y–(Y2O3)0.08x–(CaO)0.12y

J. Gong, Zilong Tang, Zhongtai Zhang, 2000 .

Analysis of the nanoindentation load–displacement curves measured on high-purity fine-grained alumina

Jianghong Gong, H. Miao, J. Gong, 2005 .

Analysis of the nanoindentation data measured with a Berkovich indenter for brittle materials: effect of the residual contact stress

H. Miao, J. Gong, Z. Peng, 2004 .

The influence of TiC-particle-size on the fracture toughness of Al2O3–30 wt.%TiC composites

H. Miao, J. Gong, Zhe Zhao, 2001 .

A comparison between Knoop and Vickers hardness of silicon nitride ceramics

J. Gong, Z. Guan, Junqiu Wang, 2002 .

R-curve behavior of TiC particle reinforced Al2O3 composites

H. Miao, J. Gong, Z. Guan, 2000 .

Effect of CaF2 on the electrical properties of yttria-stabilized zirconia

J. Gong, Yunfa Chen, Fang Zhao, 2004 .

On the contact area for nanoindentation tests with Berkovich indenter: case study on soda-lime glass

H. Miao, J. Gong, Z. Peng, 2004 .

Self-calibration of area function for mechanical property determination with nanoindentation tests

J. Gong, B. Deng, D. Jiang, 2020, Journal of Materials Science.

SiOx Nanodandelion by Laser Ablation for Anode of Lithium-Ion Battery.

Hui Wu, W. Pan, M. Zhong, 2015, Small.

Microstructure and mechanical properties of titanium nitride coatings for cemented carbide cutting tools by pulsed high energy density plasma

H. Miao, J. Gong, L. Qi, 2003 .

Investigation on the Modification Methods to Ceramic Cutting Tools

W. Pan, H. Miao, J. Gong, 2004 .

Study of LSGM Slurry for Gel-Tape-Casting

J. Gong, Zhongzhou Zhang, Z. Tang, 2004 .

Relationship between the Ratio of Young’s Modulus to Hardness and the Elastic Recovery of Nanoindentation

H. Miao, J. Gong, Zhijian Peng, 2011 .

Relationship between the Estimated Weibull Modulus and the Coefficient of Variation of the Measured Strength for Ceramics

Ying Li, Jianghong Gong, J. Gong, 2004 .

Functionally Graded Materials VII

Wei Pan, Lidong Chen, Jianghong Gong, 2003 .

A new probability index for estimating Weibull modulus for ceramics with the least-square method

J. Gong, 2000 .

Carbon Nanotube Synthesis and Growth Using Zeolite by Catalytic CVD and Applications

Wei Zhao, J. Gong, I. Kim, 2013 .

The Efficiency of Normal Distribution in Statistical Characterization of the Experimentally Measured Strength for Ceramics

J. Gong, B. Deng, D. Jiang, 2020, Journal of Materials Engineering and Performance.

Filling the Gaps between Graphene Oxide: A General Strategy toward Nanolayered Oxides

Hui Wu, Wei Pan, Xi Luo, 2015 .

Grain Growth in (Ga, Mn)-Codoped ZnO Ceramics

J. Gong, Shuai Li, B. Shen, 2011 .

Area-Perimeter Relation of the Grains in Stabilized Cubic Zirconia

J. Gong, Ying Li, Yun Wan, 2007 .

Buckled Tin Oxide Nanobelt Webs as Highly Stretchable and Transparent Photosensors.

Hui Wu, Wei Pan, Xi Luo, 2015, Small.

Description of the statistical variations of the measured strength for brittle ceramics: A comparison between two-parameter Weibull distribution and normal distribution

J. Gong, Xingang Wang, B. Deng, 2020, Processing and Application of Ceramics.

Environmental effects on the room-temperature static fatigue behavior of polycrystalline mullite

J. Gong, C. Du, 2000 .

Is a three-parameter Weibull function really necessary for the characterization of the statistical variation of the strength of brittle ceramics?

J. Gong, B. Deng, D. Jiang, 2017 .

Improving the Strength of Al2TiO5 by Adding Spodumene

J. Gong, Jiayun Pan, 2004 .

Synergetic enhancement of mechanical and electrical properties in Ce0.8Sm0.1Nd0.1O2−δ/La10Si6O27 composite electrolytes

Kai Wang, W. Pan, J. Gong, 2018 .

Effect of flowing slurry on the delayed failure behavior of polycrystalline mullite

J. Gong, C. Du, 2000 .

Room temperature time-dependent failure behavior of polycrystalline mullite in water

J. Gong, C. Du, 1998 .

A facile fabrication method for ultrathin NiO/Ni nanosheets as a high-performance electrocatalyst for the oxygen evolution reaction

Hui Wu, M. Fang, J. Gong, 2017 .

A new function for the description of the nanoindentation unloading data

H. Miao, J. Gong, Z. Peng, 2003 .

Description of the nanoindentation unloading curves with a universal function: Theoretical consideration and applications to brittle materials

J. Gong, B. Deng, D. Jiang, 2020 .

Determining indentation toughness by incorporating true hardness into fracture mechanics equations

J. Gong, 1999 .

Fracture toughness of Al2O3-TiCN composites

H. Miao, J. Gong, Z. Guan, 2001 .

Nondestructively determining local strength and residual stress of glass by Hertzian indentation

J. Gong, Y. Bao, L. Sun, 2002 .

Low amplitude cyclic deformation behavior of single crystalline silicon

J. Gong, A. Jacques, A. George, 1999 .

Low-temperature ionic conductivity of the solid solution in the system ZrO2–Y2O3–Yb2O3

Ying Li, Jianghong Gong, Zilong Tang, 2002 .

Analysis of non-linear Arrhenius behavior of ionic conduction in cubic zirconia stabilized with yttria and calcia

J. Gong, Yunfa Chen, Y. Xie, 2002 .

Correlation between Weibull moduli for tensile and bending strength of brittle ceramics: a numerical simulation analysis based on a three-parameter Weibull distribution

J. Gong, 2003 .

Analysis for Strength Degradation of Indented Specimens Due to Thermal Shock

J. Gong, Z. Guan, D. Jiang, 1992 .

Determination of the Confidence Interval of Weibull Modulus Estimated with Small Data Set

J. Gong, Jun Wang, 2002 .

Reply to “Comment on ‘Relationship between the Estimated Weibull Modulus and the Coefficient of Variation of the Measured Strength for Ceramics’”

J. Gong, Ying Li, 2004 .