Hung-Chun Wu

发表

Towards an understanding of the role of hyper-branched oligomers coated on cathodes, in the safety mechanism of lithium-ion batteries

Hsueh-Ming Liu, D. Saikia, Hung-Chun Wu, 2014 .

Investigation on suppressed thermal runaway of Li-ion battery by hyper-branched polymer coated on cathode

Nae-Lih Wu, Jing-Pin Pan, Tsung-Hsiung Wang, 2013 .

Novel SEI formation of maleimide-based additives and its improvement of capability and cyclicability in lithium ion batteries

Hung-Chun Wu, Fu-Ming Wang, C. Yang, 2008 .

Enhanced High-Temperature Cycle Life of LiFePO4-Based Li-Ion Batteries by Vinylene Carbonate as Electrolyte Additive

Deng-Tswen Shieh, Nae-Lih Wu, Mo-Hua Yang, 2006 .

Thermal explosion hazards on 18650 lithium ion batteries with a VSP2 adiabatic calorimeter.

Chi-Min Shu, Can-Yong Jhu, Yih-Wen Wang, 2011, Journal of hazardous materials.

Influences of surface fluorination and carbon coating with furan resin in natural graphite as anode in lithium-ion batteries

Hung-Chun Wu, Yu-Shiang Wu, Yuan-Haun Lee, 2008 .

A fast formation process for lithium batteries

Deng-Tswen Shieh, Mo-Hua Yang, Chi-Chao Wan, 2004 .

Nano-porous SiO/carbon composite anode for lithium-ion batteries

Martin Winter, Nae-Lih Wu, M. Winter, 2009 .

Electrochemical Characterizations on Si and C-Coated Si Particle Electrodes for Lithium-Ion Batteries

Mo-hua Yang, Hung-Chun Wu, N. Wu, 2005 .

Effect of electrode structure on performance of Si anode in Li-ion batteries: Si particle size and conductive additive

Mo-hua Yang, Hung-Chun Wu, N. Wu, 2005 .

Enhanced Cycle Life of Si Anode for Li-Ion Batteries by Using Modified Elastomeric Binder

Mo-hua Yang, Hung-Chun Wu, N. Wu, 2005 .

Compositional effect of PVdF-PEMA blend gel polymer electrolytes for lithium polymer batteries

S. Rajendran, Hung-Chun Wu, N. Wu, 2007 .

Development and characterizations of PVdF-PEMA gel polymer electrolytes

S. Rajendran, Hung-Chun Wu, N. Wu, 2012, Ionics.

High-temperature carbon-coated aluminum current collector for enhanced power performance of LiFePO4 electrode of Li-ion batteries

Hung-Chun Wu, N. Wu, Hsien-Chang Wu, 2010 .

Study on dynamics of structural transformation during charge/discharge of LiFePO4 cathode

Nae-Lih Wu, Mo-Hua Yang, Hao-Hsun Chang, 2008 .

Study on the synthesis–microstructure-performance relationship of layered Li-excess nickel–manganese oxide as a Li-ion battery cathode prepared by high-temperature calcination

Yijin Liu, P. Pianetta, Hung-Chun Wu, 2013 .

Microwave-mediated hydrothermal synthesis and electrochemical properties of LiNi1/3Co1/3Mn1/3O2 powders

Hung-Chun Wu, Chung‐Hsin Lu, Bo-Jun Shen, 2008 .

Spherical Nanostructured LiNi1/3Co1/3Mn1/3O2 Powders Prepared via an Ultrasonic Spray Pyrolysis Process

T. Wu, Mo-hua Yang, Hung-Chun Wu, 2005 .

New layer-structured LiNi 1/3Co 1/3Al 1/3O 2 prepared via water-in-oil microemulsion method

Mo-hua Yang, Hung-Chun Wu, Chung‐Hsin Lu, 2005 .

Fabrication of size-tunable antireflective nanopillar array using hybrid nano-patterning lithography

Hung-Chun Wu, Mingquan Zhang, K. Ma, 2014 .

Synthesis and Characterization of Nanoporous NiSi-Si Composite Anode for Lithium-Ion Batteries

J. Besenhard, M. Winter, Mo-hua Yang, 2007 .

Characterization and Electrochemical Behavior of Graphene-Based Anode for Li-Ion Batteries

Hung-Chun Wu, Ching-Yi Su, Wei-Ren Liu, 2011 .

Enhanced High-Temperature Cycle-Life of Mesophase Graphite Anode with Styrene–Butadiene Rubber/Carboxymethyl Cellulose Binder

Hung-Chun Wu, Ching-Yi Su, N. Wu, 2012 .

High ionic transfer of a hyperbranched-network gel copolymer electrolyte for potential electric vehicle (EV) application

Hung-Chun Wu, Fu-Ming Wang, C. Yang, 2009 .

Effects of a graphene nanosheet conductive additive on the high-capacity lithium-excess manganese–nickel oxide cathodes of lithium-ion batteries

Hung-Chun Wu, N. Wu, Yu-Ting Weng, 2014, Journal of Applied Electrochemistry.

Kinetic study on low-temperature synthesis of LiFePO4 via solid-state reaction

Mo-hua Yang, Hung-Chun Wu, H. Sheu, 2006 .

Study the fading mechanism of LiMn2O4 battery with spherical and flake type graphite as anode materials

Mo-hua Yang, Hung-Chun Wu, Zheng-Zhao Guo, 2005 .

Silicon oxide-on-graphite planar composite synthesized using a microwave-assisted coating method for use as a fast-charging lithium-ion battery anode

Hung-Chun Wu, N. Wu, Yu-Shiang Wu, 2015 .

Fabrication of size-tunable hierarchical CrN nanohole arrays for two-dimensional nanomould using modified nanosphere lithography

Hung-Chun Wu, K. Ma, M. Bao, 2014 .

Fabrication of size-tunable Cr nanodots and nanorings array by modified nanosphere lithography

Hung-Chun Wu, K. Ma, H. Chien, 2012 .

Lithium Storage Behavior of Graphene Nanosheets‐based Materials

Hung-Chun Wu, Wei-Ren Liu, S. Kuo, 2012 .

Synthesis of Li1.1Ni1/3Co1/3Mn1/3O2 cathode material using spray-microwave method

Hung-Chun Wu, Zheng-Zhao Guo, S. Cheng, 2007 .

Study on Microstructural Deformation of Working Sn and SnSb Anode Particles for Li-Ion Batteries by in Situ Transmission X-ray Microscopy

Nae-Lih Wu, Yen-Fang Song, Hung-Chun Wu, 2011 .

Effects of TiO2 coating on high-temperature cycle performance of LiFePO4-based lithium-ion batteries

Mo-hua Yang, Hung-Chun Wu, Ching-Yi Su, 2008 .

Self-polymerized membrane derivative of branched additive for internal short protection of high safe

B. Hwang, Hung-Chun Wu, Fu-Ming Wang, 2011 .

Study on Solid-Electrolyte-Interphase of Si and C-Coated Si Electrodes in Lithium Cells

Hung-Chun Wu, N. Wu, Yu-Chan Yen, 2009 .

Lithium storage in reduced graphene oxides

Hung-Chun Wu, N. Wu, Wei-Ren Liu, 2013 .

Synthesis of Porous Si Particles by Metal-assisted Chemical Etching for Li-ion Battery Application

Hung-Chun Wu, Chun-Chieh Lin, N. Wu, 2012 .

A Novel Cavity-Enhanced Polyethylene/Nanostructured-Alumina Separator with Long Cycle Life and High Rate Capability for Advanced Lithium-Ion Batteries

Chi-Chang Hu, Yu-Han Lin, Hung-Chun Wu, 2021 .

Interfacial Reactions of Sn-3.0Ag-0.5Cu Solder with Sputter Cu-Ti Alloy Film UBM

Hung-Chun Wu, M. Bao, Bingtao Zhou, 2021, Journal of Electronic Materials.

Enhanced High-Rate Cycling Stability of LiMn2O4 Cathode by ZrO2 Coating for Li-Ion Battery

Mo-hua Yang, Hung-Chun Wu, H. Sheu, 2005 .

A study on the interior microstructures of working Sn particle electrode of Li-ion batteries by in situ X-ray transmission microscopy

Nae-Lih Wu, Yen-Fang Song, Yi-ming Chen, 2010 .

The function of vinylene carbonate as a thermal additive to electrolyte in lithium batteries

C. Wan, Mo-hua Yang, Yung‐Yun Wang, 2005 .

Fabrication of size-tunable hierarchical porous Cr nanoring arrays by modified nanosphere lithography

Hung-Chun Wu, H. Chien, 2012 .

Effect of C60 ion sputtering on the compositional depth profiling in XPS for Li(Ni,Co,Mn)O2 electrodes

Hung-Chun Wu, Ching-Yi Su, J. Pan, 2011 .

Graphene-based anode materials for lithium-ion batteries

Hung-Chun Wu, Ching-Yi Su, Hui Xu, 2010 .

Preparation and electrochemical characteristics of spherical spinel cathode powders via an ultrasonic spray pyrolysis process

T. Wu, Mo-hua Yang, Hung-Chun Wu, 2008 .

In Situ Transmission X-ray Microscopy Study on Working SnO Anode Particle of Li-Ion Batteries

Nae-Lih Wu, Yen-Fang Song, Hung-Chun Wu, 2011 .

Enhanced high-temperature cycle performance of LiFePO4/carbon batteries by an ion-sieving metal coating on negative electrode

Hung-Chun Wu, N. Wu, Hao-Hsun Chang, 2008 .