Wan-Keun Kim

发表

Effects of lithium salts on thermal stabilities of lithium alkyl carbonates in SEI layer

Myung-Hyun Ryou, Dong Jin Lee, Jung-Ki Park, 2012 .

Effect of Al2O3 coatings prepared by RF sputtering on polyethylene separators for high-power lithium ion batteries

Myung-Hyun Ryou, Yong Min Lee, Yunju Lee, 2014, Macromolecular Research.

A hydrophobic blend binder for anti-water flooding of cathode catalyst layers in polymer electrolyte

Jung-Ki Park, J. Choi, Wan-Keun Kim, 2011 .

Proton exchange membranes based on hydrophilic–hydrophobic multiblock copolymers using different hydrophobic oligomer

Jung-Ki Park, Wan-Keun Kim, Min-ju Choo, 2011 .

Proton Conducting Membrane Based on Crosslinked Sulfonated Polyimide for Direct Methanol Fuel Cell

Jung-Ki Park, Wan-Keun Kim, Min-ju Choo, 2009 .

Influence of dispersion solvent for catalyst ink containing sulfonated poly(ether ether ketone) on cathode behaviour in a direct methanol fuel cell

Jung-Ki Park, Wan-Keun Kim, Ho‐Young Jung, 2007 .

Partially Perfluorinated Hydrocarbon Ionomer for Cathode Catalyst Layer of Polymer Electrolyte Membrane Fuel Cell

Jung-Ki Park, Hee‐Tak Kim, Wan-Keun Kim, 2014 .

Proton Exchange Membrane Using Imidazole-Functionalized Silica to Enhance Proton Conductivity at Lower Humidity

Jung-Ki Park, Wan-Keun Kim, Min-ju Choo, 2011 .

Preparation and charateristics of Nafion membrane coated with a PVdF copolymer/recast Nafion blend for direct methanol fuel cell

Jung-Ki Park, S. Sung, Wan-Keun Kim, 2006 .

Stability enhancement of polymer electrolyte membrane fuel cells based on a sulfonated poly(ether et

Jung-Ki Park, Wan-Keun Kim, Min-ju Choo, 2011 .

Hydrophobic properties of ethylene-vinyl alcohol copolymer treated with plasma source ion implantation

H. Park, Kibeom Kim, Wan-Keun Kim, 2004 .

2-(triphenylphosphoranylidene) succinic anhydride as a new electrolyte additive to improve high temperature cycle performance of LiMn2O4/graphite Li-ion batteries

D. J. Lee, Jung-Ki Park, Myung-Hyun Ryou, 2013 .

The effect of sulfonated poly(ether ether ketone) as an electrode binder for direct methanol fuel cell (DMFC)

Jung-Ki Park, Wan-Keun Kim, Ho‐Young Jung, 2006 .

A new catalyst layer based on in situ pore generation of sulfonated poly(ether ether ketone) for PEMFC

Jung-Ki Park, K. Cho, Wan-Keun Kim, 2009 .

The catalyst layer containing sulfonated poly(ether ether ketone) as the electrode ionomer for polymer electrolyte fuel cells

Jung-Ki Park, Wan-Keun Kim, Keun-Hwan Oh, 2009 .

Sulfonated poly(arylene ether sulfone) as an electrode binder for direct methanol fuel cell

Mahaveer D. Kurkuri, Jung-Ki Park, Wan-Keun Kim, 2007 .