M. Copley

发表

Synergistic electrolyte additives for enhancing the performance of high-voltage lithium-ion cathodes in half-cells and full-cells

M. Wohlfahrt‐Mehrens, R. Behm, M. Kuenzel, 2021, Journal of Power Sources.

Lithium-ion batteries – Current state of the art and anticipated developments

Heng Zhang, M. Armand, K. Edström, 2020 .

Determining the Limits and Effects of High-Rate Cycling on Lithium Iron Phosphate Cylindrical Cells

E. Kendrick, D. Greenwood, M. Loveridge, 2020 .

MnPO4‐Coated Li(Ni0.4Co0.2Mn0.4)O2 for Lithium(‐Ion) Batteries with Outstanding Cycling Stability and Enhanced Lithiation Kinetics

R. Behm, Jakob Asenbauer, Zhen Chen, 2018, Advanced Energy Materials.

Time-resolved SAXS studies of periodic mesoporous organosilicas in anodic alumina membranes

D. Arnold, M. Morris, N. Petkov, 2010 .

Tailoring the physical and catalytic properties of lanthanum oxycarbonate nanoparticles

M. Copley, G. Marin, J. Thybaut, 2017 .

Structural, Thermal, and Electrochemical Studies of Novel Li2CoxMn1–x(SO4)2 Bimetallic Sulfates

M. Ulaganathan, V. Aravindan, M. Srinivasan, 2017 .

MnPO4 -Coated Li-NCM: MnPO4 -Coated Li(Ni0.4 Co0.2 Mn0.4 )O2 for Lithium(-Ion) Batteries with Outstanding Cycling Stability and Enhanced Lithiation Kinetics (Adv. Energy Mater. 27/2018)

R. Behm, Jakob Asenbauer, Zhen Chen, 2018, Advanced Energy Materials.

TAILORING POROUS SILICA PARTICLE AND PORE SIZE USING A MODIFIED STÖBER, FINK, BOHN (SFB) SYSTEM AND POST-SYNTHESIS HYDROTHERMAL TREATMENTS

M. Morris, J. Holmes, M. Copley, 2008 .

Characterization of nanoembedded alloyed thermoelectrics

N. Mingo, M. Copley, R. Potter, 2014 .

Machine learning for investigating the relative importance of electrodes’ N:P areal capacity ratio in the manufacturing of lithium-ion battery cells

Mona Faraji Niri, M. Copley, M. Lain, 2022, Journal of Power Sources.

Electronic and Geometric Structures of Rechargeable Lithium Manganese Sulfate Li2Mn(SO4)2 Cathode

Z. Dong, S. Xi, M. Srinivasan, 2019, ACS omega.

Electronic and Geometric Structures of Rechargeable Lithium Manganese Sulfate Li 2 Mn ( SO 4 ) 2 Cathode

Z. Dong, S. Xi, M. Srinivasan, 2019 .

MnS doped mesoporous silica catalysts for the generation of novel carbon nanocages

M. Morris, J. Holmes, M. Copley, 2008 .

Roadmap on Li-ion battery manufacturing research

D. Brett, P. Shearing, S. Duncan, 2022, Journal of Physics: Energy.

Unusual magnetism in templated NiS nanoparticles

M. Morris, J. Holmes, M. Copley, 2010, Journal of physics. Condensed matter : an Institute of Physics journal.

Synthesis of Porous Silica Foams via a Novel Vacuum‐Induced Sol–Gel Method

M. Morris, J. Holmes, M. Copley, 2009 .

Flame spray pyrolysis generated transition metal oxide nanoparticles as catalysts for the growth of carbon nanotubes

N. Grobert, M. Copley, A. Koós, 2013 .

In situ studies of order–disorder phenomena in the synthesis of mesoporous silica

M. Morris, J. Holmes, H. Amenitsch, 2007 .

Pore expansion in mesoporous silicas using supercritical carbon dioxide

M. Morris, K. Ryan, J. Holmes, 2004 .

Methanolysis of styrene oxide catalysed by a highly efficient zirconium-doped mesoporous silica

D. Barreca, M. Morris, J. Holmes, 2006 .

Synthesis of multimodal porous ZnCo2O4 and its electrochemical properties as an anode material for lithium ion batteries

Zhichuan J. Xu, K. Zhou, S. Hao, 2015 .

Manganese phosphate coated Li[Ni0.6Co0.2Mn0.2]O2 cathode material: Towards superior cycling stability at elevated temperature and high voltage

R. Behm, Yizhong Huang, Zhen Chen, 2018, Journal of Power Sources.

Toward greener lithium-ion batteries: Aqueous binder-based LiNi0.4Co0.2Mn0.4O2 cathode material with superior electrochemical performance

Zhen Chen, S. Passerini, M. Copley, 2017 .

Secondary Lithium-Ion Battery Anodes: From First Commercial Batteries to Recent Research Activities Addressing the challenges in rechargeable lithium-ion battery technologies

D. Bresser, S. Passerini, M. Copley, 2015 .

Effect of coatings on the green electrode processing and cycling behaviour of LiCoPO4

S. Passerini, M. Copley, Agnese Birrozzi, 2016 .

Ex situ XAS investigation of effect of binders on electrochemical performance of Li2Fe(SO4)2 cathode

V. Aravindan, M. Srinivasan, M. Copley, 2017 .

Scaling up “Nano” Li4Ti5O12 for High-Power Lithium-Ion Anodes Using Large Scale Flame Spray Pyrolysis

D. Bresser, S. Passerini, F. Nobili, 2015 .

The importance of “going nano” for high power battery materials

Martin Winter, Stefano Passerini, M. Winter, 2012 .

A modified Stöber process for the production of mesoporous Sub 2 micron silica microspheres; applications in HPLC

M. Morris, J. Holmes, M. Copley, 2010 .

Transforming anatase TiO 2 nanorods into ultrafine nanoparticles for advanced electrochemical performance

M. Striccoli, D. Bresser, S. Passerini, 2015 .

Design of Experiments for Optimizing the Calendering Process in Li-Ion Battery Manufacturing

M. Faraji-Niri, M. Copley, G. Apachitei, 2023, SSRN Electronic Journal.

Magnetic properties of Ni nanoparticles on microporous silica spheres

Saibal Roy, Terence O'Donnell, Justin D. Holmes, 2010 .

Binder-induced surface structure evolution effects on Li-ion battery performance

A. Witkowska, F. Nobili, R. Gunnella, 2018 .

Development of chemically engineered porous metal oxides for phosphate removal.

M. Morris, J. Holmes, M. Copley, 2011, Journal of hazardous materials.

Synthesis and characterization of nanoparticulate MnS within the pores of mesoporous silica

M. Morris, J. Holmes, M. Copley, 2007, Journal of Solid State Chemistry.

1D nanobar-like LiNi0.4Co0.2Mn0.4O2 as a stable cathode material for lithium-ion batteries with superior long-term capacity retention and high rate capability

Zhen Chen, S. Passerini, M. Copley, 2017 .

A Comparison of Lithium-Ion Cell Performance across Three Different Cell Formats

E. Kendrick, M. Copley, M. Lain, 2021, Batteries.