Kehua Dai

发表

Entropy Change Characteristics of the LiNi0.5Mn1.5O4 Cathode Material for Lithium-Ion Batteries

Jing Mao, Peng Zhang, Xin Liu, 2020, ACS omega.

Electrochemical studies of spinel LiNi0.5Mn1.5O4 cathodes with different particle morphologies

Jing Mao, Y. Zhai, Kehua Dai, 2012 .

Review—Research Progress on Layered Transition Metal Oxide Cathode Materials for Sodium Ion Batteries

Jing Mao, G. Shao, Kehua Dai, 2021 .

Li(Ni1/3Co1/3Mn1/3)O2 with High Rate Capability Synthesized via a Novel Gel-Combustion Method

Jing Mao, Y. Zhai, Kehua Dai, 2011 .

Effect of fluorine in the preparation of Li(Ni1/3Co1/3Mn1/3)O2 via hydroxide co-precipitation

Qilu, Kehua Dai, Yangshan Xie, 2008 .

Homogeneous hybridization of NASICON-type cathode for enhanced sodium-ion storage

Dejun Li, Kehua Dai, Guo Ai, 2022, Energy Storage Materials.

Novel Hoberman Sphere Design for Interlaced Mn3O4@CNT Architecture with ALD Coated TiO2 Overlayer as Advanced Anodes in Li-ion Battery.

Dejun Li, Gao Liu, Kehua Dai, 2020, ACS applied materials & interfaces.

Design principles for high transition metal capacity in disordered rocksalt Li-ion cathodes

W. Richards, G. Ceder, Jinhyuk Lee, 2018 .

Enhancing Cell Performance of Lithium-Rich Manganese-Based Materials via Tailoring Crystalline States of a Coating Layer.

Jing Mao, Yunjiao Li, Cheng Yan, 2021, ACS applied materials & interfaces.

Na2/3MnO2 nanoplates with exposed active planes as superior electrochemical performance sodium-ion batteries

Jing Mao, Yunjiao Li, Kehua Dai, 2021, Ionics.

Modification of Transition-Metal Redox by Interstitial Water in Hexacyanometalate Electrodes for Sodium-Ion Batteries.

Zhi-Xun Shen, Zengqing Zhuo, Wanli Yang, 2017, Journal of the American Chemical Society.

High Reversibility of Lattice Oxygen Redox Quantified by Direct Bulk Probes of Both Anionic and Cationic Redox Reactions

William E. Gent, F. Pan, Zhi-Xun Shen, 2018, Joule.

Towards Ni-rich layered oxides cathodes with low Li/Ni intermixing by mild molten-salt ion exchange for lithium-ion batteries

Kehua Dai, Jun-chao Zheng, Zhen-yu Wang, 2022, Nano Energy.

Microsized single-crystal spinel LAMO for high-power lithium ion batteries synthesized via polyvinylpyrrolidone combustion method

V. Battaglia, Jing Mao, Xiangyun Song, 2014 .

Synergistic effect of Co3Fe7 alloy and N-doped hollow carbon spheres with high activity and stability for high-performance lithium-sulfur batteries

Jing Mao, Kehua Dai, Jinpeng Wu, 2021 .

TiH2 Nanodots Exfoliated via Facile Sonication as Bifunctional Electrocatalysts for Li-S Batteries.

Jing Mao, Kehua Dai, Fei Gong, 2022, ACS applied materials & interfaces.

Insights into the Dynamic Catalytic Effect of Metal Sulfides with Prominent Lithiation Process in the Application of Li–S Batteries

Dejun Li, Bo Zhang, Gao Liu, 2020 .

Highly Catalytic Boron Nitride Nanofiber In Situ Grown on Pretreated Ketjenblack as a Cathode for Enhanced Performance of Lithium–Sulfur Batteries

Jing Mao, Kehua Dai, Chao Sun, 2020 .

High-performance quaternary polymer solid-state electrolyte via one-step casting method

Kehua Dai, Jun-chao Zheng, Zhen-yu Wang, 2022 .

Comprehensive understanding of Li/Ni intermixing in layered transition metal oxides

Kehua Dai, Jun-chao Zheng, Linbo Tang, 2021, Materials Today.

Lithium-rich manganese-based cathode materials with highly stable lattice and surface enabled by perovskite-type phase-compatible layer

Jing Mao, Cheng Yan, Kehua Dai, 2021 .

Cathode-Electrolyte Integrating Strategy Enabling Solid-State Lithium Metal Battery with Enhanced Cycle Stability

Jing Mao, Yunjiao Li, Kehua Dai, 2022, SSRN Electronic Journal.

Nickel-rich and cobalt-free layered oxide cathode materials for lithium ion batteries

Kehua Dai, Jun-chao Zheng, Zhen-yu Wang, 2022, Energy Storage Materials.

Negligible voltage hysteresis with strong anionic redox in conventional battery electrode

F. Pan, Jing Mao, Zengqing Zhuo, 2020, Nano Energy.

P2-type Na2/3Ni1/3Mn2/3O2 Cathode Material with Excellent Rate and Cycling Performance for Sodium-Ion Batteries

Jing Mao, Wanli Yang, Gao Liu, 2019, Journal of The Electrochemical Society.

Single-Crystal Nickel-Based Cathodes: Fundamentals and Recent Advances

Kehua Dai, Jun-chao Zheng, Han-xin Wei, 2022, Electrochemical Energy Reviews.

MoSe2@N, P-C composites for sodium ion battery

Kehua Dai, Jun-chao Zheng, Y. Luo, 2022, Journal of Central South University.

High Reversibility of Lattice Oxygen Redox in Na-ion and Li-ion Batteries Quantified by Direct Bulk Probes of both Anionic and Cationic Redox Reactions

William E. Gent, Zhi-Xun Shen, W. Chueh, 2018 .

Hydrophobic Layer of Amino Acid Enabling Dendrite-free Zn Anode for Aqueous Zinc-ion Batteries

Kehua Dai, Jun-chao Zheng, Zhen-yu Wang, 2022, Journal of Materials Chemistry A.

Cation doping constructed vacancy engineering for designing Sn3Se5@PPy heterostructures toward lithium/sodium-ion batteries

Kehua Dai, Jun-chao Zheng, Zhen-yu Wang, 2022, Journal of Power Sources.

Strengthened d-p Orbital Hybridization through Asymmetric Coordination Engineering of Single-Atom Catalysts for Durable Lithium-Sulfur Batteries.

H. Zhang, Jing Mao, X. Li, 2022, Nano letters.

Fast Li-ion conductor Li1+yTi2-yAly(PO4)3 modified Li1.2[Mn0.54Ni0.13Co0.13]O2 as high performance cathode material for Li-ion battery

Jing Mao, Cheng Yan, Yunjiao Li, 2021, Ceramics International.

Study on the Reversible and Irreversible Heat Generation of the Lithium-Ion Battery with LiFePO_4 Cathode

Kehua Dai, Guo Ai, Wenfeng Mao, 2022, Fire Technology.

Exploring the Charge Compensation Mechanism of P2-Type Na0.6Mg0.3Mn0.7O2 Cathode Materials for Advanced Sodium-Ion Batteries

Jing Mao, Jinghua Guo, Kehua Dai, 2020, Energies.

Recent Advances on Heterojunction‐Type Anode Materials for Lithium‐/Sodium‐Ion Batteries

Kehua Dai, Jun-chao Zheng, Zhen-yu Wang, 2022, Small methods.

Synthesis and properties of single-crystal Ni-rich cathode materials in Li-ion batteries

Jing Mao, Yunjiao Li, Kehua Dai, 2021 .

Elemental-sensitive Detection of the Chemistry in Batteries through Soft X-ray Absorption Spectroscopy and Resonant Inelastic X-ray Scattering.

Zengqing Zhuo, R. Qiao, Wanli Yang, 2018, Journal of visualized experiments : JoVE.

Fast-ionic conductor Li2.64(Sc0.9Ti0.1)2(PO4)3 doped PVDF-HFP hybrid gel-electrolyte for lithium ion batteries

Kehua Dai, Jun-chao Zheng, Zhen-yu Wang, 2022, Journal of Central South University.

Propelling polysulfide redox conversion by d-band modulation for high sulfur loading and low temperature lithium–sulfur batteries

Jing Mao, Kehua Dai, Lirong Zheng, 2021, Journal of Materials Chemistry A.

A sandwich-like Ti3C2@VO2 composite synthesized by a hydrothermal method for lithium storage

Jing Mao, Kehua Dai, Jun-chao Zheng, 2021 .

Spectroscopic Signature of Oxidized Oxygen States in Peroxides.

F. Pan, Z. Hussain, Zengqing Zhuo, 2018, The journal of physical chemistry letters.

An advance review of solid-state battery: Challenges, progress and prospects

Jing Mao, Kehua Dai, Jun-chao Zheng, 2021 .

Design and Tailoring of Carbon-Al2O3 Double Coated Nickel-Based Cation-Disordered Cathodes Towards High-Performance Li-Ion Batteries

Zaiping Guo, Honghui Wu, Kehua Dai, 2022, Nano Energy.

SnS particles anchored on Ti3C2 nanosheets as high-performance anodes for lithium-ion batteries

Jing Mao, Cheng Yan, Kehua Dai, 2022, Journal of Alloys and Compounds.

Investigation of the nano-crystal CoS2 embedded in 3D honeycomb-like graphitic carbon with synergistic effect for high performance lithium sulfur batteries.

Bo Zhang, Dejun Li, Qianqian Hu, 2019, ACS applied materials & interfaces.

Boosting polysulfide redox conversion of Li-S batteries by one-step-synthesized Co-Mo bimetallic nitride

Jing Mao, Kehua Dai, Tianran Yan, 2021 .

Distinct Oxygen Redox Activities in Li2MO3 (M = Mn, Ru, Ir)

F. Pan, N. Tamura, Jinghua Guo, 2021, ACS Energy Letters.

The transformation of graphite electrode materials in lithium-ion batteries after cycling

V. Battaglia, Xiangyun Song, Kai Wu, 2015 .

Toward high specific capacity and high cycling stability of pure tin nanoparticles with conductive polymer binder for sodium ion batteries

V. Battaglia, Xiangyun Song, H Zhao, 2014 .

Kinetics behavior of single-crystal nickel-rich cathode materials at different cut-off voltages

Jing Mao, Kehua Dai, Jun-chao Zheng, 2022, Ionics.

Surface Modification Engineering Enabling 4.6 V Single‐Crystalline Ni‐Rich Cathode with Superior Long‐Term Cyclability

Kehua Dai, Jun-chao Zheng, Linbo Tang, 2021, Advanced Functional Materials.

Tin antimony oxide @graphene as a novel anode material for lithium ion batteries

Jing Mao, Kehua Dai, Jun-chao Zheng, 2021, Ceramics International.

High entropy oxides (FeNiCrMnX)3O4 (X=Zn, Mg) as anode materials for lithium ion batteries

Jing Mao, Kehua Dai, Jun-chao Zheng, 2021, Ceramics International.

In-situ chemical conversion film for stabilizing zinc metal anodes

Jing Mao, Kehua Dai, Jun-chao Zheng, 2022, Journal of Energy Chemistry.

Recent progress of functional separators with catalytic effects for high-performance lithium-sulfur batteries

Xiaofei Yang, X. Sun, Jing Mao, 2021 .

MoS2/SnS@C hollow hierarchical nanotubes as superior performance anode for sodium-ion batteries

Jing Mao, Bao Zhang, Kehua Dai, 2021, Nano Energy.

Enhancing structure and cycling stability of Ni-rich layered oxide cathodes at elevated temperatures via dual-function surface modification

Kehua Dai, Jun-chao Zheng, Han-xin Wei, 2022, Journal of Energy Chemistry.

Microcrack generation and modification of Ni-rich cathodes for Li-ion batteries: A review

Jing Mao, Kehua Dai, Jun-chao Zheng, 2021 .

Effect of Chromium and Niobium Doping on the Morphology and Electrochemical Performance of High-Voltage Spinel LiNi(0.5)Mn(1.5)O4 Cathode Material.

V. Battaglia, Jing Mao, R. Qiao, 2016, ACS applied materials & interfaces.

Precisely Modulating the Structural Stability and Redox Potential of Sodium Layered Cathodes through the Synergetic Effect of Co-doping Strategy

Kehua Dai, Liang Zhang, Chen Cheng, 2022, Energy Storage Materials.

Bidirectionally catalytic polysulfide conversion by high-conductive metal carbides for lithium-sulfur batteries

Jing Mao, Kehua Dai, Pan Zeng, 2021, Journal of Energy Chemistry.

Dissociate lattice oxygen redox reactions from capacity and voltage drops of battery electrodes

F. Pan, Z. Hussain, Zengqing Zhuo, 2020, Science Advances.

Designing spacial skeleton for lithium metal anode with Li+ concentration regulation and interfacial modification

Dejun Li, Kehua Dai, Guo Ai, 2021, Journal of Alloys and Compounds.

Cycling mechanism of Li2MnO3: Li–CO2 batteries and commonality on oxygen redox in cathode materials

F. Pan, Liquan Chen, Hong Li, 2021, Joule.

Revealing and suppressing surface Mn(II) formation of Na0.44MnO2 electrodes for Na-ion batteries

V. Battaglia, D. Sokaras, Jing Mao, 2015 .

Design principles for high transition metal capacity in disordered rocksalt Li-ion cathodes

W. Richards, G. Ceder, Jinhyuk Lee, 2018 .

Fundamentals of Ion‐Exchange Synthesis and Its Implications in Layered Oxide Cathodes: Recent Advances and Perspective

Kehua Dai, Zhen-yu Wang, Q. Pan, 2023, Advanced Energy Materials.

Na 0.44 MnO 2 with very fast sodium diffusion and stable cycling synthesized via polyvinylpyrrolidone-combustion method

Xiangyun Song, Gao Liu, Vince Battaglia, 2015 .

In Situ Reconstruction of Electrocatalysts for Lithium–Sulfur Batteries: Progress and Prospects

Xiaolian Wang, Kehua Dai, Pan Zeng, 2023, Advanced Functional Materials.

Adjusting Crystal Orientation to Promote Sodium‐Ion Transport in V5S8@Graphene Anode Materials for High‐Performance Sodium‐Ion Batteries

Kehua Dai, Zhen-yu Wang, Linkai Tang, 2023, Small methods.

In Situ-Constructed Multifunctional Interface for High-Voltage 4.6 V LiCoO2.

B. Zhao, Hengbao Chen, Kehua Dai, 2023, ACS applied materials & interfaces.

The effect of cobalt doping on the morphology and electrochemical performance of high-voltage spinel LiNi0.5Mn1.5O4 cathode material

V. Battaglia, Jing Mao, Gao Liu, 2016 .

Double-coated SnS with hierarchical carbon network as high-performance anode materials for sodium-ion batteries

Kehua Dai, Linkai Tang, Cheng Yan, 2022, Journal of Electroanalytical Chemistry.

Carbon decorated Li3V2(PO4)3 for high-rate lithium-ion batteries: Electrochemical performance and charge compensation mechanism

Jing Mao, Jinghua Guo, L. Mai, 2020 .

Enhanced Cycling Stability of 4.6 V LiCoO2 Cathodes by Inhibiting Catalytic Activity of its Interface Via MXene Modification

B. Zhao, Hengbao Chen, Kehua Dai, 2023, Advanced Functional Materials.

Hierarchical ZnS-SnS2@C nanocomposite as superior-rate and long-life anode for sodium ion batteries

Kehua Dai, Zhen-yu Wang, Linkai Tang, 2023, Journal of Alloys and Compounds.

Recent advances in interfacial modification of zinc anode for aqueous rechargeable zinc ion batteries

Kehua Dai, Linkai Tang, Qing Wen, 2023, Journal of Energy Chemistry.

Regulating cation mixing for enhanced structural stability of layered oxide cathodes by ion-exchange strategy

Kehua Dai, Zhen-yu Wang, Y. Luo, 2023, Materials Today.

Unveiling Charge Compensation Mechanisms in Na2/3MgxNi1/3-xMn2/3O2 Cathode Materials: Insights into Cationic and Anionic Redox

Zengqing Zhuo, Kehua Dai, Tianran Yan, 2024, Materials Today Energy.