D. Lepage

发表

Application of a Commercially-Available Fluorine-Free Thermoplastic Elastomer as a Binder for High-Power Li-Ion Battery Electrodes

M. Dollé, Olivier Rynne, D. Lepage, 2019, Journal of The Electrochemical Society.

Low-temperature fabrication of lithium aluminum oxide phosphate solid electrolyte thin films from aqueous precursors

M. Lonergan, D. Lepage, D. Clayton, 2017, RSC Advances.

Interpreting Lithium Batteries Discharge Curves for Easy Identification of the Origin of Performance Limitations

Steen B. Schougaard, S. Schougaard, D. Lepage, 2015 .

A Critical Review for an Accurate Electrochemical Stability Window Measurement of Solid Polymer and Composite Electrolytes

S. Rousselot, M. Dollé, D. Lepage, 2021, Materials.

Acceptability and Feasibility of a Return-to-Work Intervention for Posttreatment Breast Cancer Survivors: Protocol for a Co-design and Development Study

A. Lecours, Kelley Kilpatrick, Tomás Dorta, 2022, JMIR research protocols.

Extrusion of Polymer Blend Electrolytes for Solid-State Lithium Batteries: A Study of Polar Functional Groups

M. Dollé, D. Lepage, D. Ayme-perrot, 2021, ACS Applied Polymer Materials.

Melt-processed electrode for lithium ion battery

M. Dollé, D. Lepage, D. Ayme-perrot, 2020 .

An Artificial Lithium Protective Layer that Enables the Use of Acetonitrile-Based Electrolytes in Lithium Metal Batteries.

M. Dollé, N. D. Trinh, D. Lepage, 2018, Angewandte Chemie.

Crosslinker free thermally induced crosslinking of hydrogenated nitrile butadiene rubber

M. Dollé, D. Lepage, D. Ayme-perrot, 2018, Journal of Polymer Science Part A: Polymer Chemistry.

Gata4 is critical to maintain gut barrier function and mucosal integrity following epithelial injury

F. Boudreau, C. Asselin, D. Lepage, 2016, Scientific Reports.

Extrusion of Polymer Blend Electrolytes for Solid-State Lithium Batteries: A Study of Polar Functional Groups

M. Dollé, D. Lepage, Léa Caradant, 2021, ACS Applied Polymer Materials.

Analysis of recessive CD2AP and ACTN4 mutations in steroid-resistant nephrotic syndrome

O. Gribouval, C. Antignac, G. Benoît, 2010, Pediatric Nephrology.

Modification of aluminum current collectors with a conductive polymer for application in lithium batteries

S. Schougaard, D. Lepage, S. Gervais, 2019, Electrochemistry Communications.

Identification of GATA-4 as a novel transcriptional regulatory component of regenerating islet-derived family members.

F. Boudreau, C. Asselin, D. Lepage, 2015, Biochimica et biophysica acta.

Cross-Linked Polyacrylonitrile-Based Elastomer Used as Gel Polymer Electrolyte in Li-Ion Battery

C. Pellerin, M. Dollé, D. Lepage, 2020 .

The Impact of Absorbed Solvent on the Performance of Solid Polymer Electrolytes for Use in Solid-State Lithium Batteries

M. Dollé, D. Lepage, Nina Verdier, 2020, iScience.

Water content in solid polymer electrolytes: the lost knowledge.

M. Dollé, D. Lepage, Léa Caradant, 2020, Chemical communications.

Challenges in Solvent-Free Methods for Manufacturing Electrodes and Electrolytes for Lithium-Based Batteries

M. Dollé, D. Lepage, Nina Verdier, 2021, Polymers.

Probing the phase transition in VO 2 using few-cycle 1.8 μ m pulses

F. Légaré, M. Chaker, D. Lepage, 2018 .

A soft chemistry approach to coating of LiFePO4 with a conducting polymer.

Guoxian Liang, Michel Gauthier, M. Gauthier, 2011, Angewandte Chemie.

Thermal and Electrochemical Properties of Solid Polymer Electrolytes Prepared via Lithium Salt-Catalyzed Epoxide Ring Opening Polymerization

M. Dollé, D. Lepage, Nina Verdier, 2021 .

Effect of Li+ Affinity on Ionic Conductivities in Melt-Blended Nitrile Rubber/Polyether

M. Dollé, D. Lepage, Léa Caradant, 2020 .

Conductive polymer film supporting LiFePO4 as composite cathode for lithium ion batteries

N. D. Trinh, S. Schougaard, D. Lepage, 2013 .

Solution-Processed Li2O-Al2O3 / TiO2 Nanolaminate Stacks Containing Mobile Lithium Ions and with Increased Breakdown Voltages.

M. Lonergan, D. Lepage, D. Clayton, 2019, ACS applied materials & interfaces.

Polyacrylonitrile-based rubber (HNBR) as a new potential elastomeric binder for lithium-ion battery electrodes

M. Dollé, D. Lepage, D. Rochefort, 2019, Journal of Power Sources.

NMR Study of Lithium Transport in Liquid-Ceramic Hybrid Solid Composite Electrolytes.

S. Rousselot, M. Dollé, D. Lepage, 2022, ACS applied materials & interfaces.

Exploiting Materials to Their Full Potential, a Li-Ion Battery Electrode Formulation Optimization Study

M. Dubarry, M. Dollé, Olivier Rynne, 2020 .

Limiting Factors Affecting the Ionic Conductivities of LATP/Polymer Hybrid Electrolytes

S. Rousselot, M. Dollé, D. Lepage, 2023, Batteries.

Ohmic Drop in LiFePO4Based Lithium Battery Cathodes Containing Agglomerates

S. Schougaard, D. Lepage, R. Cornut, 2012 .

Increased cut-off wavelength with decreasing hole size in a metal

R. Gordon, A. Brolo, D. Lepage, 2005, 2005 Pacific Rim Conference on Lasers & Electro-Optics.

Use of Solid-State NMR Spectroscopy for the Characterization of Molecular Structure and Dynamics in Solid Polymer and Hybrid Electrolytes

M. Dollé, N. Dupré, D. Lepage, 2021, Polymers.

Delithiation kinetics study of carbon coated and carbon free LiFePO4

G. Liang, S. Schougaard, D. Lepage, 2014 .

Blend of Polymers As New Solid Electrolytes for Lithium-Ion Batteries

M. Dollé, D. Lepage, Léa Caradant, 2020 .

Ultrafast charging of LiFePO4 with gaseous oxidants under ambient conditions

G. Liang, S. Schougaard, D. Lepage, 2013 .

A soft chemistry approach to coating of LiFePO4 with a conducting polymer.

M. Gauthier, G. Liang, S. Schougaard, 2011, Angewandte Chemie.

Effects of Lithium Metal Storage Environment on Its Reactivity toward Polyethylene Oxide-Based Blend Electrolytes.

S. Rousselot, M. Dollé, D. Lepage, 2023, ACS applied materials & interfaces.