B. Levenfeld

发表

Non-woven polyaramid porous membranes as separators for Li-ion batteries?

J. Sanchez, J. Pérez-Flores, A. Kuhn, 2021 .

Evaluation of polyolefin-based macroporous separators for high temperature Li-ion batteries

Alejandro Várez, Belén Levenfeld, C. Antonelli, 2016 .

Additive-free Li4Ti5O12 thick electrodes for Li-ion batteries with high electrochemical performance

J. Amarilla, J. Sanchez, B. Levenfeld, 2018 .

Multiblock copolymers of sulfonated PSU/PPSU Poly(ether sulfone)s as solid electrolytes for proton exchange membrane fuel cells

C. Iojoiu, Jean‐Yves Sanchez, B. Levenfeld, 2019, Electrochimica Acta.

Interplay between humidity, temperature and electrical response of a conductivity sensor based on a La2LiNbO6 double perovskite

V. Noto, B. Levenfeld, A. Várez, 2018 .

Development of new feedstock formulation based on high density polyethylene for MIM of M2 high speed steels

B. Levenfeld, A. Várez, J. Torralba, 2005 .

Relationship between the morphology of PMMA particles and properties of acrylic bone cements

J. Planell, J. Román, M. Gurruchaga, 1996 .

New polymers for biomedical applications: Synthesis and characterization of acrylic systems with pharmacological activity

A. Gallardo, J. Román, B. Levenfeld, 1994 .

Ultra-thick battery electrodes for high gravimetric and volumetric energy density Li-ion batteries

S. Passerini, Jean‐Yves Sanchez, Guk‐Tae Kim, 2019, Journal of Power Sources.

Synthesis and characterization of novel hybrid polysulfone/silica membranes doped with phosphomolybdic acid for fuel cell applications

B. Levenfeld, A. Várez, M. J. Martínez-Morlanes, 2015 .

Magnetic Properties of Ni‐Ferrite Produced by High Energy Milling

B. Levenfeld, A. Várez, J. Torralba, 2012 .

Production of alumina parts by powder injection molding with a binder system based on high density polyethylene

B. Levenfeld, A. Várez, P. Thomas-Vielma, 2008 .

Metal injection moulding of bronze using thermoplastic binder based on HDPE

B. Levenfeld, A. Várez, J. Torralba, 2007 .

Modified metal injection moulding process of 316L stainless steel powders using thermosetting binder

B. Levenfeld, A. Várez, J. Torralba, 2000 .

Study of the La1/2+1/2xLi1/2-1/2xTi1-xAlxO3 (0 ≤ x ≤ 1) solid solution. A new example of percolative system in fast ion conductors

J. Sanz, B. Levenfeld, A. Várez, 2017 .

Tape casting manufacturing of thick Li4Ti5O12 ceramic electrodes with high areal capacity for lithium-ion batteries

J. Amarilla, Jean‐Yves Sanchez, B. Levenfeld, 2021 .

Synthesis and characterization of benzimidazolium‐functionalized polysulfones as anion‐exchange membranes

B. Levenfeld, A. Várez, M. Pérez-Prior, 2015 .

Synthesis and characterization of anion-exchange membranes with various functional groups

B. Levenfeld, A. Várez, M. Pérez-Prior, 2015 .

Application of tertiary amines with reduced toxicity to the curing process of acrylic bone cements.

J. San Román, J. Planell, M. Gurruchaga, 1997, Journal of biomedical materials research.

New amphiphilic semi-interpenetrating networks based on polysulfone for anion-exchange membrane fuel cells with improved alkaline and mechanical stabilities

B. Levenfeld, A. Várez, C. Río, 2021 .

Synthesis and Characterization of Novel Anion Exchange Membranes Based on Semi-Interpenetrating Networks of Functionalized Polysulfone: Effect of Ionic Crosslinking

B. Levenfeld, A. Várez, Nieves Ureña, 2021, Polymers.

Synthesis and characterization of sulfonated PEEK-WC-PES copolymers for fuel cell proton exchange membrane application

F. Trotta, B. Levenfeld, A. Várez, 2017 .

Opening the door to liquid-free polymer electrolytes for calcium batteries

K. Vezzù, V. Noto, C. Martinez-Cisneros, 2020 .

Characterization and Modeling of Free Volume and Ionic Conduction in Multiblock Copolymer Proton Exchange Membranes

B. Levenfeld, Nieves Ureña, M. Pérez-Prior, 2022, Polymers.

Synthesis and characterization of polysulfone/ layered double hydroxides nanocomposite membranes for fuel cell application

B. Levenfeld, A. Várez, Juan Carlos Galván, 2014 .

DABCO-functionalized polysulfones as anion-exchange membranes for fuel cell applications: Effect of crosslinking

B. Levenfeld, C. Río, Nieves Ureña, 2017 .

Sulfonated Polysulfone/TiO2(B) Nanowires Composite Membranes as Polymer Electrolytes in Fuel Cells

C. Del Río, B. Levenfeld, A. Várez, 2021, Polymers.

Microstructural study of duplex stainless steels obtained by powder injection molding

B. Levenfeld, A. Várez, M. Sotomayor, 2014 .

Magnetic properties of Mg-ferrite after milling process

B. Levenfeld, A. Várez, J. Torralba, 2003 .

Sintering in different atmospheres of T15 and M2 high speed steels produced by a modified metal injection moulding process

L. Dobrzański, G. Matula, B. Levenfeld, 2004 .

Polymers with pharmacological activity. 6. microstructure and stereochemistry of hydrophilic copolymers prepared from 4-((2-(methacryloyloxy)ethyl)oxy)acetanilide and 2-hydroxyethyl methacrylate

J. Román, B. Levenfeld, 1991 .

Using Metal-Organic Framework HKUST-1 for the Preparation of High-Conductive Hybrid Membranes Based on Multiblock Copolymers for Fuel Cells

C. Del Río, B. Levenfeld, A. Várez, 2023, Polymers.

Development of sodium-conducting polymer electrolytes: comparison between film-casting and films obtained via green processes

C. Martinez-Cisneros, B. Levenfeld, A. Várez, 2016 .

Synthesis and characterization of new membranes based on sulfonated polysulfone/Zn,Al-heptamolibdate LDH

B. Levenfeld, A. Várez, A. M. Martos, 2015 .

Coarse and cheap may beat fine and expensive

B. Levenfeld, J. Torralba, J. M. Contreras, 2006 .

Microstructure, magnetic and mechanical properties of Ni–Zn ferrites prepared by powder injection moulding

B. Levenfeld, A. Várez, M. París, 2011 .

Preparation and characterization of ammonium-functionalized polysulfone/Al2O3 composite membranes

B. Levenfeld, A. Várez, M. Pérez-Prior, 2015, Journal of Materials Science.

Study of the densification, mechanical and magnetic properties of Ni–Zn ferrites sintered in a solar furnace

B. Levenfeld, A. Várez, I. Cañadas, 2015 .

Injectable self-curing bioactive acrylic-glass composites charged with specific anti-inflammatory/analgesic agent.

J. San Román, B. Vázquez, B. Levenfeld, 2004, Biomaterials.

New aspects of the effect of size and size distribution on the setting parameters and mechanical properties of acrylic bone cements.

J. San Román, J. Planell, M. Gurruchaga, 1996, Biomaterials.

Processing of P/M T15 high speed steels by mould casting using thermosetting binders

B. Levenfeld, A. Várez, J. Torralba, 2001 .

Influence of powder particle size distribution on rheological properties of 316 L powder injection moulding feedstocks

B. Levenfeld, A. Várez, M. Sotomayor, 2010 .

Development of sodium hybrid quasi-solid electrolytes based on porous NASICON and ionic liquids

J. Sanchez, C. Martinez-Cisneros, C. Antonelli, 2021, Journal of the European Ceramic Society.

Role of amine activators on the curing parameters, properties and toxicity of acrylic bone cements

J. Román, B. Vázquez, B. Levenfeld, 1998 .

Production of Alumina Microparts by Powder Injection Molding

B. Levenfeld, A. Várez, A. Cervera, 2011 .

Optimization of the Processing of 8-YSZ Powder by Powder Injection Molding for SOFC Electrolytes

T. Jardiel, B. Levenfeld, A. Várez, 2008 .

Powder injection moulding of premixed ferritic and austenitic stainless steel powders

B. Levenfeld, A. Várez, M. Sotomayor, 2011 .

Mechanical properties and pitting corrosion behaviour of 316L stainless steel parts obtained by a modified metal injection moulding process

B. Levenfeld, A. Várez, J. Torralba, 2003 .

Effect of residual carbon on the sintering process of M2 high speed steel parts obtained by a modified metal injection molding process

B. Levenfeld, A. Várez, J. Torralba, 2002 .

Studies of polymerization of acrylic monomers using luminescence probes and differential scanning calorimetry

J. Baselga, B. Levenfeld, J. Bravo, 1996 .

Structure and properties of HS6-5-2 type HSS manufactured by different P/M methods

L. Dobrzański, G. Matula, B. Levenfeld, 2007 .

Processing of P/M M2 high speed steels by mould casting using thermosetting binders

B. Levenfeld, A. Várez, J. Torralba, 2001 .

Detailed microstructural analysis of 4-(methacryloyloxy)acetanilide-2-hydroxyethyl methacrylate copolymers using carbon-13 nuclear magnetic resonance spectroscopy

J. Román, B. Levenfeld, J. S. Román, 1990 .

Polymer electrolytes based on POE and Na-TFS salt for all-solid-state batteries

C. Martinez-Cisneros, B. Levenfeld, A. Várez, 2015 .

Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials

I. Krupa, B. Levenfeld, A. Várez, 2014 .

Reactivity of a polymerizable amine activator in the free radical copolymerization with methyl methacrylate and surface properties of copolymers

B. Vázquez, B. Levenfeld, C. Elvira, 1997 .

Processing of Mn–Zn ferrites using mould casting with acrylic thermosetting binder

B. Levenfeld, A. Várez, J. Torralba, 2005 .

Comparison of structure and properties of the HS12-1-5-5 type high- speed steel fabricated using the pressureless forming and PIM methods

L. Dobrzański, G. Matula, B. Levenfeld, 2005 .

Surface modification of a duplex stainless steel for plastic-metal hybrid parts

J. Sanz, B. Levenfeld, A. Várez, 2015 .

On the Conductivity of Proton-Exchange Membranes Based on Multiblock Copolymers of Sulfonated Polysulfone and Polyphenylsulfone: An Experimental and Modeling Study

B. Levenfeld, Nieves Ureña, M. Pérez-Prior, 2021, Polymers.

Electrical and Magnetic Properties of NiZn Ferrite Prepared by Conventional and Solar Sintering

A. West, B. Levenfeld, A. Várez, 2016 .

Fabrication methods and heat treatment conditions effect on tribological properties of high speed steels

L. Dobrzański, G. Matula, B. Levenfeld, 2004 .

High-performance Ni–YSZ thin-walled microtubes for anode-supported solid oxide fuel cells obtained by powder extrusion moulding

B. Levenfeld, A. Várez, M. Sotomayor, 2016 .

Flexible Solvent-Free Polymer Electrolytes for Solid-State Na Batteries

Jean‐Yves Sanchez, C. Martinez-Cisneros, B. Levenfeld, 2023, SSRN Electronic Journal.

Sodium polymer electrolytes composed of sulfonated polysulfone and macromolecular/molecular solvents for Na-batteries

J. Sanchez, C. Martinez-Cisneros, C. Antonelli, 2017 .

Acrylic bone cements incorporating polymeric active components derived from salicylic acid: curing parameters and properties

J. San Román, J. Planell, B. Vázquez, 1998, Journal of materials science. Materials in medicine.

Interplay between Conductivity, Matrix Relaxations and Composition of Ca‐Polyoxyethylene Polymer Electrolytes

Jean‐Yves Sanchez, K. Vezzù, C. Martinez-Cisneros, 2021, ChemElectroChem.

Layer shape LiFePO4 obtained by Powder Extrusion Molding as solid boosters for ferro/ferricyanide catholyte in semisolid redox flow battery: effect of porosity and shape

B. Levenfeld, A. Várez, J. F. Vivo-Vilches, 2022, Batteries & Supercaps.

Fabrication of 8-YSZ thin-wall tubes by powder extrusion moulding for SOFC electrolytes

Alejandro Várez, Belén Levenfeld, T. Jardiel, 2009 .

Polymers with pharmacological activity. 3. Stereochemical configuration of acrylic polymers bearing paracetamol and phenacetin side groups

B. Levenfeld, J. S. Román, 1990 .

Proton Conducting Sulfonated Polysulfone and Polyphenylsulfone Multiblock Copolymers with Improved Performances for Fuel Cell Applications

C. Iojoiu, Jean‐Yves Sanchez, C. Del Río, 2023, Journal of Industrial and Engineering Chemistry.

Polymers with pharmacological activity: 2. Synthesis and free radical polymerization of an acrylic derivative of phenacetin

B. Levenfeld, E. Madruga, J. S. Román, 1990 .

Oxygen transport through methacrylate-based hydrogels with potential biological capability.

T. S. Sorensen, J. San Román, B. Levenfeld, 1996, Biomaterials.

In Vitro and In Vivo Behaviour of Bioactive Glass Composites Bearing a NSAID

J. San Román, B. Vázquez, B. Levenfeld, 2003 .

Characterization of 430L porous supports obtained by powder extrusion moulding for their application in solid oxide fuel cells

B. Levenfeld, A. Várez, M. Sotomayor, 2013 .

Design of industrially scalable microtubular solid oxide fuel cells based on an extruded support

B. I. Arias, B. Levenfeld, A. Várez, 2014 .

Porous Ni-YSZ planar anodes by powder extrusion moulding employing PMMA as pore former

B. Levenfeld, A. Várez, M. Sotomayor, 2016 .

Application of powder injection moulding and extrusion process to manufacturing of Ni-YSZ anodes

G. Matula, T. Jardiel, B. Levenfeld, 2009 .

High mass loading additive-free LiFePO4 cathodes with 500 μm thickness for high areal capacity Li-ion batteries

Barbara Laïk, J. Pereira‐Ramos, Jean‐Yves Sanchez, 2020, Journal of Power Sources.

All-solid-state sodium-ion batteries operating at room temperature based on NASICON-type NaTi2(PO4)3 cathode and ceramic NASICON solid electrolyte: A complete in situ synchrotron X-ray study

B. Levenfeld, A. Várez, Bidhan Pandit, 2023, Chemical Engineering Journal.

Electrochemical and structural characterization of sulfonated polysulfone

J. Sanchez, B. Levenfeld, A. Várez, 2015 .

Advancements in Quasi-Solid-State Li Batteries: A Rigid Hybrid Electrolyte Using LATP Porous Ceramic Membrane and Infiltrated Ionic Liquid

B. Levenfeld, C. de la Torre-Gamarra, A. Várez, 2024, ACS applied energy materials.