T. Ichikawa

发表

Study of the cycling performance of finely dispersed lithium alloy composite electrodes under high Li-utilization

J. Yang, N. Imanishi, Y. Takeda, 1999 .

Preparation and Characterization of Si ∕ C Composite Coated with Polyaniline as Novel Anodes for Li-Ion Batteries

Yang Liu, Yasuo Takeda, Nobuyuki Imanishi, 2005 .

Electrochemical studies of the Si-based composites with large capacity and good cycling stability as anode materials for rechargeable lithium ion batteries

N. Imanishi, A. Hirano, Y. Takeda, 2005 .

Neutron diffraction study on layered rocksalt Li1−xNi1+xO2 at high temperature

N. Imanishi, A. Hirano, Y. Takeda, 2002 .

Carbon as negative electrodes in lithium secondary cells

Y. Takeda, O. Yamamoto, R. Kanno, 1989 .

Stability of La1−xAxMnO3−z (A=Ca, Sr) as cathode materials for solid oxide fuel cells

M. Mori, N. Imanishi, Y. Takeda, 1994 .

SnSbx-based composite electrodes for lithium ion cells

J. Yang, N. Imanishi, Y. Takeda, 2000 .

Lithium transition metal nitrides with the modified morphology characteristics as advanced anode materials for lithium ion batteries

N. Imanishi, A. Hirano, Y. Takeda, 2004 .

Improvement of cyclic behavior of a ball-milled SiO and carbon nanofiber composite anode for lithium

M. B. Phillipps, N. Imanishi, A. Hirano, 2011 .

High performance Si/C@CNF composite anode for solid-polymer lithium-ion batteries

N. Imanishi, A. Hirano, Y. Takeda, 2011 .

Lithium Nitride Formation on Lithium Metal

N. Imanishi, Y. Takeda, O. Yamamoto, 2012 .

Ln1−xSrxCo1−yFeyO3−δ (Ln=Pr, Nd, Gd; x=0.2, 0.3) for the electrodes of solid oxide fuel cells

N. Imanishi, A. Hirano, Y. Takeda, 2003 .

Dense sintered conditions and sintering mechanisms for alkaline earth metal (Mg, Ca and Sr)-doped LaCrO3 perovskites under reducing atmosphere

Tohru Yamamoto, M. Mori, Y. Takeda, 2002 .

The brittle-to-ductile transition in tensile and impact behavior of hybrid carbon fibre/self-reinforced polypropylene composites

L. Gorbatikh, T. Ichikawa, I. Verpoest, 2018, Composites Part A: Applied Science and Manufacturing.

A high performance silicon/carbon composite anode with carbon nanofiber for lithium-ion batteries

A. Hirano, Nobuyuki Imanishi, N. Imanishi, 2010 .

An oxygen permeable membrane La0.8Sr0.2(Ga0.8Mg0.2)1 − xCrxO3 − δ for a reduced atmosphere

K. Murata, N. Imanishi, A. Hirano, 2009 .

Gd{sub 1{minus}x}A{sub x}Mn{sub 1{minus}y}Co{sub y}O{sub 3{minus}{delta}} (A = Sr, Ca) as a cathode for solid-oxide fuel cells

M. B. Phillipps, N. Sammes, N. Imanishi, 1999 .

Gd1 − x A x Mn1 − y Co y O 3 − δ ( A = Sr , Ca ) as a Cathode for Solid‐Oxide Fuel Cells

M. B. Phillipps, N. Sammes, N. Imanishi, 1999 .

All solid-state Li-ion batteries based on intercalation electrodes and poly (ethylene oxide)-LiX electrolytes

N. Imanishi, A. Hirano, Y. Takeda, 2005 .

Charge‐Discharge Characteristics of Mesophase‐Pitch‐Based Carbon Fibers for Lithium Cells

Nobuyuki Imanishi, N. Imanishi, Y. Takeda, 1993 .

Cathodic characteristics of amorphous manganese oxides as lithium secondary battery

N. Imanishi, Y. Takeda, A. Hirano, 2002 .