Zhaohua Wang

发表

Stable Carbon–Selenium Bonds for Enhanced Performance in Tremella‐Like 2D Chalcogenide Battery Anode

Yijin Liu, Yahong Xu, Ying Bai, 2018, Advanced Energy Materials.

Carbon Nanofiber Elastically Confined Nanoflowers: A Highly Efficient Design for Molybdenum Disulfide-Based Flexible Anodes Toward Fast Sodium Storage.

Feng Wu, Ying Bai, Haixia Ren, 2019, ACS applied materials & interfaces.

Reversible Al3+ storage mechanism in anatase TiO2 cathode material for ionic liquid electrolyte-based aluminum-ion batteries

Hong Li, Feng Wu, Liumin Suo, 2020 .

Inhibition of Crystallization of Poly(ethylene oxide) by Ionic Liquid: Insight into Plasticizing Mechanism and Application for Solid-State Sodium Ion Batteries.

Feng Wu, Kun Zhang, Huajie Xu, 2019, ACS applied materials & interfaces.

Phosphorus-Doped Hard Carbon Nanofibers Prepared by Electrospinning as an Anode in Sodium-Ion Batteries.

Feng Wu, Ying Bai, Yu Li, 2018, ACS applied materials & interfaces.

Unveil the mechanism of solid electrolyte interphase on Na3V2(PO4)3 formed by a novel NaPF6/BMITFSI ionic liquid electrolyte

Feng Wu, Ying Bai, Yu Li, 2018, Nano Energy.

Insights into the Na+ Storage Mechanism of Phosphorus‐Functionalized Hard Carbon as Ultrahigh Capacity Anodes

Jun Lu, K. Amine, Feng Wu, 2018 .

Multilayered Electride Ca2N Electrode via Compression Molding Fabrication for Sodium Ion Batteries.

Feng Wu, Yugui Yao, Ying Bai, 2017, ACS applied materials & interfaces.

Enhanced lithium storage capability of FeF3·0.33H2O single crystal with active insertion site exposed

Jun Lu, Feng Wu, Yifei Yuan, 2019, Nano Energy.

Solvent-assisted exfoliation for high-quality molybdenum disulfide nanoflakes and relevant field-effect transistors

Yongyi Mao, Zhaohua Wang, Xiong Chen, 2022, Journal of Materials Science.

Developing an Interpenetrated Porous and Ultra-Superior Hard-Carbon Anode via A Promising Molten-Salt Evaporation Method.

Huajie Xu, Ying Bai, Yu Li, 2019, ACS applied materials & interfaces.

Boosting the ultrahigh initial coulombic efficiency of porous carbon anodes for sodium-ion batteries via in situ fabrication of a passivation interface

Feng Wu, Minghao Zhang, Ying Bai, 2021 .

Building an Electronic Bridge via Ag Decoration To Enhance Kinetics of Iron Fluoride Cathode in Lithium-Ion Batteries.

Feng Wu, Ying Bai, Yu Li, 2017, ACS applied materials & interfaces.

Probing the Energy Storage Mechanism of Quasi‐Metallic Na in Hard Carbon for Sodium‐Ion Batteries

Hong Li, Hongcai Gao, Huajie Xu, 2021, Advanced Energy Materials.

Superior sodium-storage behavior of flexible anatase TiO2 promoted by oxygen vacancies

Feng Wu, Huajie Xu, Ying Bai, 2020 .

Effect of tetraphenylphenyl‐modified fumed silica on silicone rubber radiation resistance

Shengyu Feng, Zhaohua Wang, S. Zhang, 2011 .

Co‐Construction of Sulfur Vacancies and Heterojunctions in Tungsten Disulfide to Induce Fast Electronic/Ionic Diffusion Kinetics for Sodium‐Ion Batteries

Feng Wu, J. Qian, L. Mai, 2020, Advanced materials.

High-Capacity Interstitial Mn-Incorporated MnxFe3-xO4/Graphene Nanocomposite for Sodium Ion Battery Anodes.

Feng Wu, Huajie Xu, Ying Bai, 2019, ACS applied materials & interfaces.

3D Electronic Channels Wrapped Large-Sized Na3 V2 (PO4 )3 as Flexible Electrode for Sodium-Ion Batteries.

Feng Wu, Ying Bai, Yu Li, 2018, Small.

Analysis of the Stable Interphase Responsible for the Excellent Electrochemical Performance of Graphite Electrodes in Sodium-Ion Batteries.

Jun Lu, Huajie Xu, Ying Bai, 2020, Small.

Quick Activation of Nanoporous Anatase TiO2 as High-Rate and Durable Anode Materials for Sodium-Ion Batteries.

Feng Wu, Ying Bai, Yu Li, 2017, ACS applied materials & interfaces.

Remarkable Effect of Sodium Alginate Aqueous Binder on Anatase TiO2 as High-Performance Anode in Sodium Ion Batteries.

Ying Bai, Chuan Wu, Guanghai Chen, 2018, ACS applied materials & interfaces.

Reversible and irreversible heat generation of NCA/Si–C pouch cell during electrochemical energy-storage process

Jiang Zhou, Hui-Xia Zhao, Ying Bai, 2019, Journal of Energy Chemistry.

Surface engineering based on in situ electro-polymerization to boost the initial Coulombic efficiency of hard carbon anode for sodium-ion battery

Yu Li, Xinran Wang, Chuan Wu, 2022, Rare Metals.

Reorganizing electronic structure of Li3V2(PO4)3 using polyanion (BO3)3−: towards better electrochemical performances

Feng Wu, Shi Chen, Ying Bai, 2017, Rare Metals.

PY13FSI-Infiltrated SBA-15 as Non-Flammable and High Ion-Conductive Ionogel Electrolytes for Quasi-Solid-State Sodium-Ion Batteries.

Huajie Xu, Ying Bai, Xinran Wang, 2020, ACS applied materials & interfaces.

Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode

Chuan Wu, Feng Wu, Ying Bai, 2019, Energy Storage Materials.

Application of carbon-fiber-reinforced polymer anode in electrochemical chloride extraction of steel-reinforced concrete

Zhaohua Wang, F. Xing, Ji-hua Zhu, 2016 .

PREPARATION OF WOLLASTONITE COATED WITH NANO-ALUMINIUM SILICATE AND ITS APPLICATION IN FILLING PA6

Lijing Wang, Zhaohua Wang, Peng Huang, 2010 .

Sodium‐Ion Batteries: Probing the Energy Storage Mechanism of Quasi‐Metallic Na in Hard Carbon for Sodium‐Ion Batteries (Adv. Energy Mater. 11/2021)

Hong Li, Hongcai Gao, Huajie Xu, 2021 .

Surface Inorganic Modification of Wollastonite and its Application in Filling Polypropelyne

Zhaohua Wang, Shuilin Zheng, Caili Wang, 2010 .

Sodium Ion Batteries: Stable Carbon-Selenium Bonds for Enhanced Performance in Tremella -Like 2D Chalcogenide Battery Anode (Adv. Energy Mater. 23/2018)

Yijin Liu, Yahong Xu, Ying Bai, 2018, Advanced Energy Materials.

Study on the regeneration process and overall performance of a microencapsulated phase change material slurry dehumidification system

O. Mahian, Zhaohua Wang, Junming Zhou, 2023, Renewable Energy.

Quick Activation of Nanoporous Anatase TiO2 as High-Rate and Durable Anode Materials for Sodium-Ion Batteries.

Feng Wu, Ying Bai, Yu Li, 2017, ACS applied materials & interfaces.

Rational Tuning of Li4SiO4-Based Hybrid Interface with Unique Stepwise Pre-Lithiation for Dendrite-Proof and High-Rate Lithium Anode.

Feng Wu, Ying Bai, Xinran Wang, 2020, ACS applied materials & interfaces.