Siddhartha Das

发表

Investigation on lithium conversion behavior and degradation mechanisms in Tin based ternary component alloy anodes for lithium ion batteries

P. Dahiya, S. Majumder, A. Mitra, 2017 .

Process control with chemical amplification resists using deep ultraviolet and x‐ray radiation

D. Seligson, H. Gaw, P. Pianetta, 1988 .

Influence of current density on surface morphology and properties of pulse plated tin films from citrate electrolyte

K. Das, Siddhartha Das, Ashutosh Sharma, 2014 .

Effect of various additives on morphological and structural characteristics of pulse electrodeposited tin coatings from stannous sulfate electrolyte

K. Das, Siddhartha Das, Ashutosh Sharma, 2014 .

Pulse Electroplating of Ultrafine Grained Tin Coating

K. Das, Siddhartha Das, Ashutosh Sharma, 2015 .

Pulse Electrodeposition of Lead-Free Tin-Based Composites for Microelectronic Packaging

K. Das, Siddhartha Das, Ashutosh Sharma, 2016 .

Electrochemical corrosion behavior of CeO2 nanoparticle reinforced Sn-Ag based lead free nanocomposite solders in 3.5 wt.% NaCl bath

K. Das, Siddhartha Das, Ashutosh Sharma, 2015 .

A Study on the Tribological Properties of Al-AlN-Y2W3O12 Hybrid Composites

K. Das, Siddhartha Das, J. Sethi, 2020, Journal of Materials Engineering and Performance.

Salts affect the interaction of ZnO or CuO nanoparticles with wheat

A. Anderson, Siddhartha Das, C. Dimkpa, 2015, Environmental toxicology and chemistry.

"Viscotaxis"- Directed Migration of Mesenchymal Stem Cells in Response to Loss Modulus Gradient.

S. Mayor, J. Seth, K. Venkatesh, 2021, Acta biomaterialia.

Biointerface Engineering: Prospects in Medical Diagnostics and Drug Delivery

Pranjal Chandra, Siddhartha Das, J. Bellare, 2020 .

Evolution of root form endosseous dental implant-Transformation from bone anchored to ligament anchored implants and its neurological aspects-Sensory dental implants

Siddhartha Das, J. Bellare, V. Soni, 2017 .

New combination of polishing and etching technique for revealing grain structure of an annealed aluminum (AA1235) alloy

Siddhartha Das, R. K. Roy, R. Roy, 2006 .

Multiwalled carbon nanotubes coated with twin-strengthened copper

K. Das, Siddhartha Das, Shakti Mishra, 2022, Materials Chemistry and Physics.

Investigations on different strategies towards improving the electrochemical properties of Na2VTi (PO4)3 for symmetrical sodium-ion batteries

A. Mitra, Siddhartha Das, S. Majumder, 2021 .

Progress in 193-nm top-surface imaging process development

David R. Wheeler, Guojing Zhang, John M. Hutchinson, 1998, Advanced Lithography.

Osteogenic Nanofibrous Coated Titanium Implant Results in Enhanced Osseointegration: In Vivo Preliminary Study in a Rabbit Model

A. Ingle, Siddhartha Das, J. Bellare, 2018, Tissue Engineering and Regenerative Medicine.

Friction and wear behavior of Cu–CeO2 nanocomposite coatings synthesized by pulsed electrodeposition

K. Das, Siddhartha Das, S. Bhattacharya, 2010 .

Electrodeposited functionally graded coating inhibits Gram-positive and Gram-negative bacteria by a lipid peroxidation mediated membrane damage mechanism.

R. Sen, C. Hazra, K. Das, 2019, Materials science & engineering. C, Materials for biological applications.

A Novel Multiphase Sn-Sb-Cu Alloy Electrodeposited on 3D Interconnected Microporous Cu Current Collector as Negative Electrode for Lithium Ion Battery

S. Majumder, Srijan Sengupta, K. Das, 2017 .

Aqueous combustion synthesis and characterization of zirconia–alumina nanocomposites

K. Das, Siddhartha Das, Venu Mangam, 2010 .

Ageing behavior of Al–4.5 wt% Cu matrix alloy reinforced with Al2O3 and ZrSiO4 particulate varying particle size

K. Das, Siddhartha Das, Sanjeev Das, 2006 .

Chapter 5 Pulse Electroplating of Ultrafine Grained Tin Coating

K. Das, Siddhartha Das, Ashutosh Sharma, 2018 .

A review on nanodispersed lead-free solders in electronics: synthesis, microstructure and intermetallic growth characteristics

K. Das, Siddhartha Das, Ashutosh Sharma, 2022, Journal of Materials Science.

Synthesis and characterization of MWCNT reinforced nano-crystalline copper coating from a highly basic bath through pulsed electrodeposition

Srijan Sengupta, K. Das, Siddhartha Das, 2017 .

3D microporous Sn-Sb-Ni alloy impregnated Ni foam as high-performance negative electrode for lithium-ion batteries

Srijan Sengupta, K. Das, Siddhartha Das, 2017 .

Relationship between the microstructure and properties of thermomechanically processed Fe17Mn and Fe17Mn3Al steels

K. Das, Siddhartha Das, R. Dalai, 2019 .

Relationship between the microstructure and properties of thermomechanically processed Fe−17Mn and Fe−17Mn−3Al steels

K. Das, Siddhartha Das, R. Dalai, 2019, International Journal of Minerals, Metallurgy, and Materials.

Development of Low Expansion and High Strength Aluminum Matrix Hybrid Composite

K. Das, Siddhartha Das, J. Sethi, 2017 .

Comparative Study of Slurry Erosion and Sliding Wear Properties of Quenched and Tempered Martensitic Steels

K. Das, Siddhartha Das, J. Mondal, 2022, Journal of Materials Engineering and Performance.

Comparison of Osteoconduction, cytocompatibility and corrosion protection performance of hydroxyapatite-calcium hydrogen phosphate composite coating synthesized in-situ through pulsed electro-deposition with varying amount of phase and crystallinity

V. S. Seesala, S. Dhara, Srijan Sengupta, 2018 .

MWCNT reinforced bone like calcium phosphate—Hydroxyapatite composite coating developed through pulsed electrodeposition with varying amount of apatite phase and crystallinity to promote superior osteoconduction, cytocompatibility and corrosion protection performance compared to bare metallic implan

V. S. Seesala, S. Dhara, Srijan Sengupta, 2017 .

Synthesis of calcium hydrogen phosphate and hydroxyapatite coating on SS316 substrate through pulsed electrodeposition.

Srijan Sengupta, K. Das, Siddhartha Das, 2016, Materials science & engineering. C, Materials for biological applications.

Supercapacitor like behavior in nano-sized, amorphous mixed poly-anion cathode materials for high power density lithium and other alkali-metal ion batteries

S. Majumder, A. Mitra, Siddhartha Das, 2020 .

Electrophoretically deposited NiSb2O6-carbon black composite film as a potential anode for sodium-ion battery

D. Das, S. Majumder, A. Mitra, 2021 .

Effect of stirring rate on the microstructure and microhardness of Ni–CeO2 nanocomposite coating and investigation of the corrosion property

K. Das, Siddhartha Das, R. Sen, 2011 .

Low Temperature Synthesis of Negative Thermal Expansion Y2W3O12

K. Das, Siddhartha Das, Satyabati Das, 2013, Journal of Materials Engineering and Performance.

A study on mechanical properties in friction stir lap welding of AA 6061-T6 and AISI 304

Surjya K. Pal, R. P. Mahto, Siddhartha Das, 2016 .

Amorphization and recrystallization of single-crystalline hydrogen titanate nanowires by N+ ion irradiation

A. K. Behera, Siddhartha Das, S. Facsko, 2014 .

Synthesis and Properties of Pulse Electrodeposited Ni-CeO2 Nanocomposite

K. Das, Siddhartha Das, R. Sen, 2012, Metallurgical and Materials Transactions A.

The effect of bath temperature on the crystallite size and microstructure of Ni―CeO2 nanocomposite coating

K. Das, Siddhartha Das, R. Sen, 2011 .

A strategy for designing low-cost, environment-friendly, high energy and power density sodium-ion full cells: Effect of extrinsic pseudocapacitance

S. Majumder, A. Mitra, Debasish Das, 2021 .

Effect of Anodic Passivation at High Applied Potential Difference on the Crystal Shape and Morphology of Copper Electrodeposits: Thermodynamics and Kinetics of Electrocrystallization

A. Mitra, Srijan Sengupta, M. Mallik, 2017 .

Order-disorder transformation of the body centered cubic phase in the Ti-Al-X (X = Ta, Nb, or Mo) system

K. Das, Siddhartha Das, 2003 .

Mechanical–thermal synthesis of Al–Ce/Al2O3 nanocomposite powders

S. K. Pabi, K. Das, Siddhartha Das, 2007 .

Indentation responses of plasma sprayed ceramic coatings

A. B. Chattopadhyay, Sudarsan Ghosh, Siddhartha Das, 2003 .

A review on the synthesis of in situ aluminum based composites by thermal, mechanical and mechanical–thermal activation of chemical reactions

K. Das, Siddhartha Das, B. S. Reddy, 2007 .

Tissue Engineering Strategies for Tooth and Dento-alveolar Region with Engineered Biomaterial and Stem Cells

Siddhartha Das, J. Bellare, V. Soni, 2020 .

Isothermal transformation kinetics, microstructure and mechanical properties of a carbide free bainitic steel

K. Das, Siddhartha Das, J. Mondal, 2021, Materials Characterization.

Synthesis and Properties of Pulse Electrodeposited Lead-Free Tin-Based Sn/ZrSiO4 Nanocomposite Coatings

K. Das, Siddhartha Das, Ashutosh Sharma, 2016, Metallurgical and Materials Transactions A.

Pulse Reverse Electrodeposition of Cu-SiC Nanocomposite Coating: Effects of Surfactants and Deposition Parameters

Siddhartha Das, A. K. Pradhan, 2014, Metallurgical and Materials Transactions A.

Pulse-reverse electrodeposition of Cu–SiC nanocomposite coating: Effect of concentration of SiC in the electrolyte

Siddhartha Das, A. K. Pradhan, 2014 .

Wear behavior of nano structured Al (Zn)/Al2O3 and Al (Zn)–4Cu/Al2O3 composite materials synthesized by mechanical and thermal process

K. Das, Siddhartha Das, T. Durai, 2007 .

Theoretical and experimental studies of mirror-bright Au coatings deposited from a novel cyanide-free thiosulphate-based electroplating bath

K. Das, Siddhartha Das, Sambedan Jena, 2023, Surface and Coatings Technology.

Novel pulse potentiostatic electrodeposition route for obtaining pure intermetallic Cu5Zn8-CuZn composite coating using glycerol-NaOH based electrolyte with advanced scratch resistance and anti-corrosive properties

A. Mitra, K. Das, Siddhartha Das, 2019, Journal of Alloys and Compounds.

Role of Precipitates in Recrystallization Mechanisms of Nb-Mo Microalloyed Steel

Siddhartha Das, V. Srivastava, K. Mondal, 2018, Journal of Materials Engineering and Performance.

Effect of Ni on the wear behavior of a zinc-aluminum alloy

Siddhartha Das, P. Choudhury, B. Datta, 2002 .

Substrate effect on electrodeposited copper morphology and crystal shapes

Srijan Sengupta, M. Mallik, K. Das, 2018 .

Synergistic effect of peak current density and nature of surfactant on microstructure, mechanical and electrochemical properties of pulsed electrodeposited Ni-Co-SiC nanocomposites

Srijan Sengupta, K. Das, Siddhartha Das, 2017 .

Effect of surfactant on the co-electrodeposition of the nano-sized ceria particle in the nickel matrix

K. Das, Siddhartha Das, S. Bhattacharya, 2010 .

Pulsed co-electrodeposition and characterization of Ni-based nanocomposites reinforced with combustion-synthesized, undoped, tetragonal-ZrO2 particulates

K. Das, Siddhartha Das, B. S. Reddy, 2008, Nanotechnology.

Influence of duty cycle on the microstructure and microhardness of pulse electrodeposited Ni–CeO2 nanocomposite coating

K. Das, Siddhartha Das, R. Sen, 2012 .

Dry Sliding Wear and Friction Behavior of Cu-SiC Nanocomposite Coating Prepared by Pulse Reverse Electrodeposition

Siddhartha Das, A. K. Pradhan, 2014 .

A comprehensive review of various non-cyanide electroplating baths for the production of silver and gold coatings

K. Das, Siddhartha Das, Sambedan Jena, 2022, International Materials Reviews.

Mechanical activation-assisted solid-state combustion synthesis of in situ aluminum matrix hybrid (Al3Ni/Al2O3) nanocomposites

J. S. Dilip, K. Das, Siddhartha Das, 2008 .

Abrasive Wear Behavior of Al-4.5 wt% Cu/(Zircon Sand + Silicon Carbide) Hybrid Composite

K. Das, Siddhartha Das, S. Das, 2009 .

Aqueous Combustion Synthesis and Characterization of Nanosized Tetragonal Zirconia Single Crystals

K. Das, Siddhartha Das, B.S.B. Reddy, 2007 .

Mixed fuel synthesis of Y2O3 nanopowder and their applications as dispersoid in ODS steel

B. K. Mishra, Siddhartha Das, A. Pandey, 2015 .

Effect of fuel-to-nitrate ratio on the powder characteristics of nanosized CeO2 synthesized by mixed fuel combustion method

K. Das, Siddhartha Das, H. Palneedi, 2011 .

Cu, Cu-SiC functionally graded coating for protection against corrosion and wear

Srijan Sengupta, K. Das, Siddhartha Das, 2019, Surface and Coatings Technology.

Study on thermal and mechanical properties of yttrium tungstate-aluminium nitride reinforced aluminium matrix hybrid composites

K. Das, Siddhartha Das, J. Sethi, 2019, Journal of Alloys and Compounds.

Synthesis and thermal behavior of Cu/Y2W3O12 composite

K. Das, Siddhartha Das, Satyabati Das, 2014 .

In situ dual matrix composite with segregated microstructure fabricated from Al–TiO2–B2O3 system by mechanical thermal process

K. Das, Siddhartha Das, Suprabha Lakra, 2021 .

Synthesis and characterization of Al matrix composites reinforced by in situ alumina particulates

K. Das, Siddhartha Das, T. Durai, 2007 .

Synthesis and characterization of in-situ (Al–Al3Ti–Al2O3)/Al dual matrix composite

K. Das, Siddhartha Das, T. K. Bandyopadhyay, 2020, Journal of Alloys and Compounds.

In-situ Al-based bulk nanocomposites by solid-state aluminothermic reaction in Al–Ti–O system

J. S. Dilip, K. Das, Siddhartha Das, 2009 .

Effect of mechanical milling on the corrosion behavior of Al–Zn/Al2O3 composite in NaCl solution

K. Das, Siddhartha Das, T. Durai, 2007 .

Abrasive wear of zircon sand and alumina reinforced Al–4.5 wt%Cu alloy matrix composites – A comparative study

K. Das, Siddhartha Das, S. Das, 2007 .

Evaluation of microstructural parameters of nanocrystalline Y2O3 by X-ray diffraction peak broadening analysis

B. K. Mishra, Siddhartha Das, A. Pandey, 2016 .

Synthesis and properties of Al-AlN-CuCNT and Al-Y2W3O12-CuCNT hybrid composites

K. Das, Siddhartha Das, J. Sethi, 2021 .

Microstructural evolution during high temperature sliding wear of Mg–3% Al–1% Zn (AZ31) alloy

S. Das, A. Alpas, Siddhartha Das, 2010 .

Evaluating the influence of milling time,and sintering temperature and time on the microstructural changes and mechanical properties of Al-Y2W3O12-AlN hybrid composites

K. Das, Siddhartha Das, J. Sethi, 2021 .

In-situ formation of complex oxide precipitates during processing of oxide dispersion strengthened ferritic steels

B. K. Mishra, Siddhartha Das, A. Pandey, 2016 .

Thermal conductivity of in-situ dual matrix aluminum composites with segregated morphology

K. Das, Siddhartha Das, T. K. Bandyopadhyay, 2021 .

Characterization of microstructure and properties of Al–Al3Zr–Al2O3 composite

K. Das, Siddhartha Das, A. Mandal, 2016, Bulletin of Materials Science.

Mechanical thermal synthesis of in situ Al based hybrid nanocomposites in Al–Ni–Ti–O system

J. S. Dilip, K. Das, Siddhartha Das, 2010 .

Development of lead free pulse electrodeposited tin based composite solder coating reinforced with ex situ cerium oxide nanoparticles

K. Das, Siddhartha Das, Ashutosh Sharma, 2013 .

Al (Zn)–4Cu/Al2O3 in-situ metal matrix composite synthesized by displacement reactions

K. Das, Siddhartha Das, T. Durai, 2008 .

Corrosion behavior of Al–Zn/Al2O3 and Al–Zn–X/Al2O3 (X = Cu, Mn) composites synthesized by mechanical–thermal treatment

K. Das, Siddhartha Das, T. Durai, 2008 .

A review of the Ti-Al-Ta (Titanium-Aluminum-Tantalum) system

K. Das, Siddhartha Das, 2005 .

Frictional shear induced modification of the mechanical properties of TiAl(Nb) intermetallics near the surface

Siddhartha Das, H. Fecht, R. Wunderlich, 2010 .

Effect of thermo-mechanical processing on the low impact abrasion and low stress sliding wear resistance of austenitic high manganese steels

K. Das, Siddhartha Das, R. Dalai, 2019, Wear.

Diffusional reactions during processing of TIMETAL 21S/Al2O3 composites

K. Das, Siddhartha Das, 1999 .

Microstructural Characterization of Nanosized Ceria Powders by X-Ray Diffraction Analysis

K. Das, Siddhartha Das, R. Sen, 2011 .

Influence of current density on microstructure of pulse electrodeposited tin coatings

K. Das, Siddhartha Das, Ashutosh Sharma, 2012 .

Effect of strain rate on the microstructure evolution and tensile behavior of medium manganese steel

K. Das, Siddhartha Das, Sudipta Mohapatra, 2022, Materials Letters.

Effect of different electrolytes on the microstructure, corrosion and whisker growth of pulse plated tin coatings

K. Das, Siddhartha Das, Ashutosh Sharma, 2017 .

An investigation of mechanical property and sliding wear behaviour of 400Hv grade martensitic steels

K. Das, Siddhartha Das, J. Mondal, 2020 .

Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011 alloy

Siddhartha Das, S. Kar, R. Roy, 2009 .

A study of precipitation and recrystallization behaviour of aluminium alloy AA1235

K. Das, Siddhartha Das, S. Kar, 2006 .

Evolution of as-cast and heat-treated microstructure of a commercial bearing alloy

K. Das, Siddhartha Das, P. Choudhury, 2005 .

Microstructures and tensile properties of commercial purity aluminium alloy AA1235 under different annealing conditions

K. Das, Siddhartha Das, S. Kar, 2005 .

Transmission electron microscopy of a cyclically deformed medium carbon microalloyed steel

K. A. Padmanabhan, Siddhartha Das, V. Subramanya Sarma, 1997 .

Sandwich architecture of Sn SnSb alloy nanoparticles and N-doped reduced graphene oxide sheets as a high rate capability anode for lithium-ion batteries

S. Majumder, A. Mitra, Srijan Sengupta, 2018, Journal of Power Sources.

Accentuated osseointegration in osteogenic nanofibrous coated titanium implants

A. Ingle, Siddhartha Das, J. Bellare, 2019, Scientific Reports.

Melt impregnation as a post processing treatment for performance enhancement in high capacity 3D microporous tin-copper-nickel intermetallic anode for Li-ion battery supported by electrodeposited nickel scaffold: A structural study

S. Majumder, A. Mitra, Srijan Sengupta, 2018 .

Lead-Free Sn-Ce-O Composite Coating on Cu Produced by Pulse Electrodeposition from an Aqueous Acidic Sulfate Electrolyte

K. Das, Siddhartha Das, Ashutosh Sharma, 2017, Journal of Electronic Materials.

Pulse potentiostatic deposition of Fe Zn based intermetallic coatings and evaluation of its catalytic activity for hydrogen evolution reaction

A. Mitra, K. Das, Siddhartha Das, 2020 .

Soft substrate maintains proliferative and adipogenic differentiation potential of human mesenchymal stem cells on long-term expansion by delaying senescence

Siddhartha Das, J. Bellare, A. Majumder, 2019, Biology Open.

Soft Substrate Maintains Proliferative and Adipogenic Differentiation Potential of human Mesenchymal Stem Cells on Long Term Expansion by Delaying Senescence

Siddhartha Das, J. Bellare, A. Majumder, 2018, bioRxiv.

A comparative study of electrodeposition routes for obtaining silver coatings from a novel and environment-friendly thiosulphate-based cyanide-free electroplating bath

K. Das, Siddhartha Das, Sambedan Jena, 2021, Surface and Coatings Technology.

Synthesis and characterization of novel Cu, Cu-SiC functionally graded coating by pulse reverse electrodeposition

Srijan Sengupta, K. Das, Siddhartha Das, 2019, Applied Surface Science.

Structure and properties of electrocodeposited Cu–CeO2 nanocomposite thin films

K. Das, Siddhartha Das, Venu Mangam, 2010 .

Reciprocating Sliding Wear of Cu, Cu-SiC Functionally Graded Coating on Electrical Contact

Srijan Sengupta, K. Das, Siddhartha Das, 2020, Journal of Materials Engineering and Performance.

A Study on the Effect of Electrodeposition Parameters on the Morphology of Porous Nickel Electrodeposits

Srijan Sengupta, K. Das, Siddhartha Das, 2018, Metallurgical and Materials Transactions A.

Surfactant-assisted synthesis of hydroxyapatite particles: a comprehensive review

K. Das, Siddhartha Das, B. C. Marupalli, 2023, Journal of Materials Science.

Cetrimonium bromide assisted formation of antimony alloy nanorods for use as an anode in lithium-ion and sodium-ion full-cells

A. Mitra, Debasish Das, K. Das, 2020 .

Dental Pulp Stem Cells in Customized 3D Nanofibrous Scaffolds for Regeneration of Peripheral Nervous System.

Siddhartha Das, J. Bellare, 2018, Methods in molecular biology.

Fabrication of Sn-Ag/CeO2 Electro-Composite Solder by Pulse Electrodeposition

K. Das, Siddhartha Das, Ashutosh Sharma, 2013, Metallurgical and Materials Transactions A.

Influence of intercritical annealing temperature on microstructure, microtexture, and tensile behavior of TRIP-assisted medium manganese steel

K. Das, Siddhartha Das, Sudipta Mohapatra, 2023, Materialia.

A Systematic Study on Microstructure Evolution, Mechanical Stability and the Micro-Mechanical Response of Tensile Deformed Medium Manganese Steel Through Interrupted Tensile Test

K. Das, Siddhartha Das, Sudipta Mohapatra, 2022, SSRN Electronic Journal.

Effect of annealing time on the microstructure and mechanical properties of aluminum added low-density medium manganese steel

K. Das, Siddhartha Das, Sudipta Mohapatra, 2022, Materials Letters.

Pulse galvanostatic electrodeposition of biosurfactant assisted brushite-hydroxyapatite coatings on 316 L stainless steel with enhanced electrochemical and biological properties

R. Sen, C. Hazra, K. Das, 2023, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

A Study on the Effect of Pulse Electrodeposition Parameters on the Morphology of Pure Tin Coatings

K. Das, Siddhartha Das, Ashutosh Sharma, 2014, Metallurgical and Materials Transactions A.

Capillary driven flow in wettability altered microchannel

D. Sarkar, A. Mitra, Siddhartha Das, 2017 .

“Viscotaxis”- Directed Migration of Mesenchymal Stem Cells in Response to Loss Modulus Gradient

J. Seth, K. Venkatesh, Siddhartha Das, 2019, bioRxiv.

High temperature deformation and fracture of tribo-layers on the surface of AA5083 sheet aluminum–magnesium alloy

A. Riahi, A. Alpas, Siddhartha Das, 2012 .

Does doping with aluminum alter the effects of ZnO nanoparticles on the metabolism of soil pseudomonads?

A. Anderson, Siddhartha Das, Tommy Fang, 2013, Microbiological research.

Mechanical behavior and texture evolution of integrated MCNTs/Cu composites with balanced electrical/thermal conductivity

K. Das, Siddhartha Das, Sudipta Mohapatra, 2023, Powder Technology.

Self-Assembly Study of Sodium Salt of 2-Amidodecyl Pyridine-5-Boronic Acid and Sodium Salt of 2-Amidododecyl Pyridine-5-Boronic Acid in Buffer Solution

Siddhartha Das, Sumita Roy, Monali Maiti, 2023, Journal of Surface Science and Technology.

Effect of current density on the microstructure and hardness of Ni-CeO2 nanocomposite coating synthesized by pulse electrodeposition technique.

K. Das, Siddhartha Das, R. Sen, 2010, Journal of Nanoscience and Nanotechnology.

Influence of Copper on the Microstructural, Mechanical, and Biological Properties of Commercially Pure Zn-Based Alloys for a Potential Biodegradable Implant.

R. Sen, C. Hazra, S. Dhara, 2022, ACS biomaterials science & engineering.

Experimental and DFT investigations on the influence of cetrimonium bromide (CTAB) on surface morphology and anti-tarnishing performance of pulse galvanostatically deposited gold coatings from a cyanide-free electroplating solution

K. Das, Siddhartha Das, T. Kundu, 2023, Surfaces and Interfaces.

Effect of Cetrimonium Bromide As an Additive on the Morphology and Mechanical Properties of the Electrodeposited Coatings Developed from Ethaline-Based Cyanide-Free Bath

K. Das, Siddhartha Das, Sambedan Jena, 2022, ECS Meeting Abstracts.

Solvent-Dependent Nanostructures Based on Active π-Aggregation Induced Emission Enhancement of New Carbazole Derivatives of Triphenylacrylonitrile.

K. Chaudhuri, Siddhartha Das, Santu Maity, 2019, Chemistry.

Pulsed co-electrodeposition and characterization of Ni-based nanocomposites reinforced with combustion-synthesized, undoped, tetragonal-ZrO2 particulates

K. Das, Siddhartha Das, B.S.B. Reddy, 2008, Nanotechnology.

Innovative Electrodeposition of Bimetallic Cu–Sn in a Stable Nonelectroactive Pyrophosphate-Based Bath: Reduction and Nucleation Growth Analysis

K. Das, Siddhartha Das, Vijendra Kumar, 2023, The Journal of Physical Chemistry C.

Viscoelastic substrate decouples cellular traction force from other related phenotypes.

Siddhartha Das, J. Bellare, A. Majumder, 2021, Biochemical and biophysical research communications.

Osteogenic Nanofibrous Coated Titanium Implant Results in Enhanced Osseointegration: In Vivo Preliminary Study in a Rabbit Model

A. Ingle, Siddhartha Das, J. Bellare, 2018, Tissue Engineering and Regenerative Medicine.

Study on local strain distribution and grain boundary characteristics of tensile-deformed TRIP-assisted medium manganese steel

K. Das, Siddhartha Das, Sudipta Mohapatra, 2024, Materials Science and Engineering: A.

Biosurfactant-Assisted Cu Doping of Brushite Coatings: Enhancing Structural, Electrochemical, and Biofunctional Properties.

K. Das, Siddhartha Das, N. Chakravorty, 2024, ACS applied materials & interfaces.

The effect of microstructure and mechanical properties on the slurry erosion behavior of carbide-free bainitic and martensitic steel

K. Das, Siddhartha Das, J. Mondal, 2022, Wear.

Multifaceted insights into Au coatings electrodeposited from a ChCl-EG based Deep Eutectic Solvent (DES): Unravelling the effect of surfactant polarity and current density on the morphology, mechanical properties, and anti-tarnishing efficacy

K. Das, Siddhartha Das, B. Satpathy, 2024, Surfaces and Interfaces.

Feasibility Insights of the Green-Assisted Calcium-Phosphate Coating on Biodegradable Zinc Alloys for Biomedical Application: In Vitro and In Vivo Studies.

K. Das, Siddhartha Das, Trina Roy, 2024, ACS applied materials & interfaces.

Lipopeptide and glycolipid assisted growth of ZnO micro-/nano-structures: Evaluating the role of chemical and microbial green surfactant

R. Sen, C. Hazra, K. Das, 2023, Journal of Industrial and Engineering Chemistry.

Study on the Bioactivity Response of the Newly Developed Zn-Cu-Mn/Mg Alloys for Biodegradable Implant Application.

Sharba Bandyopadhyay, K. Das, Siddhartha Das, 2024, ACS biomaterials science & engineering.

Development of Zn-2Cu-xMn/Mg Alloys for Orthopedic Applications: Mechanical Performance to In Vitro Degradation under Different Physiological Environments.

K. Das, Siddhartha Das, Debajyoti Palai, 2023, ACS biomaterials science & engineering.

Combustion and Ball Milled Synthesis of Rare Earth Nano-Sized Ceria Powder

K. Das, Siddhartha Das, R. Sen, 2011 .