Kiho Bae

发表

Dual functional effect of the ferroelectricity embedded interlayer in lithium sulfur battery

Byung Hyuk Kim, B. Son, S. Cho, 2019, Journal of Power Sources.

Germanium-tin alloy nanocrystals for high-performance lithium ion batteries.

Y. Cho, Yoon Myung, H. Kim, 2013, Physical chemistry chemical physics : PCCP.

High-Performance Protonic Ceramic Fuel Cells with Thin-Film Yttrium-Doped Barium Cerate-Zirconate Electrolytes on Compositionally Gradient Anodes.

Ji-won Son, J. Shim, D. Jang, 2016, ACS applied materials & interfaces.

Improving electrochemical properties of Lithium–Sulfur batteries by adding a catalyst-embedded interlayer

Byung Hyuk Kim, B. Son, S. Cho, 2019, Electrochimica Acta.

Improving the electrochemical behavior of lithium-sulfur batteries through silica-coated nickel-foam cathode collector

Byung Hyuk Kim, S. Cho, Kiho Bae, 2017 .

Three-dimensional thermal stress analysis of the re-oxidized Ni-YSZ anode functional layer in solid oxide fuel cells

Jun Woo Kim, F. Prinz, S. Stenfelt, 2018, Journal of Alloys and Compounds.

Chemical Protection of Polycarbonate Surfaces by Atomic Layer Deposition of Alumina with Oxygen Plasma Pretreatment

Jun Woo Kim, J. Shim, Kiho Bae, 2016 .

Solid Polymer Electrolytes Based on Functionalized Tannic Acids from Natural Resources for All-Solid-State Lithium-Ion Batteries.

Jin Hong Lee, Jong‐Chan Lee, Kiho Bae, 2015, ChemSusChem.

Surface Tuning of Solid Oxide Fuel Cell Cathode by Atomic Layer Deposition

Jun Woo Kim, H. J. Choi, Manfred Martin, 2018, Advanced Energy Materials.

Fabrication of Lanthanum Strontium Cobalt Ferrite-Gadolinium-Doped Ceria Composite Cathodes Using a Low-Price Inkjet Printer.

H. J. Choi, G. D. Han, J. Shim, 2017, ACS applied materials & interfaces.

Highly Active Oxygen Evolution on Carbon Fiber Paper Coated with Atomic-Layer-Deposited Cobalt Oxide.

H. J. Choi, G. D. Han, J. Shim, 2019, ACS applied materials & interfaces.

Designing 3D Anode Based on Pore‐Size‐Dependent Li Deposition Behavior for Reversible Li‐Free All‐Solid‐State Batteries

Yun Jung Lee, S. Son, Kiho Bae, 2022, Advanced science.

Ionic properties of ultrathin yttria-stabilized zirconia thin films fabricated by atomic layer deposition with water, oxygen, and ozone

Jun Woo Kim, J. Shim, D. Jang, 2015 .

Gradient Anode Functional Layer for Thin Y:BaZrxCe1-XO3 Electrolyte in Low-Temperature Solid Oxide Fuel Cells

Dongwook Shin, Kiho Bae, Joon Hyung Shim, 2015 .

High-performance thin-film protonic ceramic fuel cells fabricated on anode supports with a non-proton-conducting ceramic matrix

Hyoungchul Kim, K. Yoon, Ji-won Son, 2016 .

Effect of electrostatic spray deposited nafion coating on non-lithiated LiV3O8 cathode in lithium-metal rechargeable batteries

Min Woo Kim, S. Yoon, S. Cho, 2019, Solid State Ionics.

3D Evaluation of Porous Zeolite Absorbents Using FIB-SEM Tomography

Jun Woo Kim, F. Prinz, Ji-won Son, 2018 .

Electrochemical Behaviors of a Vapor-Phase Polymerized Conductive Polymer Coated on LiV3O8 in Li-Metal Rechargeable Batteries.

S. Cho, Kiho Bae, W. Yoon, 2018, ACS applied materials & interfaces.

Design and analysis of an optimal cathode for Li-LiV3O8 secondary cells

Y. Jung, S. Cho, Kiho Bae, 2019, Journal of Alloys and Compounds.

Ion Conduction in BaZr0.85Y0.15O3-δ Films Fabricated by Pulsed Laser Deposition in Various Conditions

J. Shim, D. Jang, Kiho Bae, 2012 .

Performance Degradation of Lanthanum Strontium Cobaltite after Surface Modification

Jun Woo Kim, H. J. Choi, J. Shim, 2015 .

Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells

H. J. Choi, Ji-won Son, Jong-Ho Lee, 2017, Nature Communications.

Modulating power delivery in a pulsed ICP discharge via the incorporation of negative feedback mechanisms

Kiho Bae, S. Shannon, S. Nam, 2021, Journal of Applied Physics.

Slurry spin coating of thin film yttria stabilized zirconia/gadolinia doped ceria bi-layer electrolytes for solid oxide fuel cells

G. D. Han, J. Shim, Kiho Bae, 2016 .

High Performance Anode-Supported Solid Oxide Fuel Cells with Thin Film Yttria-Stabilized Zirconia Membrane Prepared by Aerosol-Assisted Chemical Vapor Deposition

Jun Woo Kim, Ji-won Son, J. Shim, 2017 .

Economic and environmental analysis of a wind-hybrid power system with desalination in Hong-do, South Korea

Kiho Bae, Joon Hyung Shim, J. Shim, 2012 .

Inkjet Printing for Manufacturing Solid Oxide Fuel Cells

H. J. Choi, G. D. Han, J. Shim, 2020 .

Evaluation of porous platinum, nickel, and lanthanum strontium cobaltite as electrode materials for low-temperature solid oxide fuel cells

S. Cha, J. Shim, D. Jang, 2014 .

Fabrication of NiO-Y:BaZrO 3 composite anode for thin film-protonic ceramic fuel cells using tape-casting

Ji-won Son, Jong-Ho Lee, Byung‐Kook Kim, 2015 .

High‐Performance Protonic Ceramic Fuel Cells with 1 µm Thick Y:Ba(Ce, Zr)O3 Electrolytes

H. J. Choi, Ji-won Son, J. Shim, 2018, Advanced Energy Materials.

High–performance protonic ceramic fuel cells with a PrBa0.5Sr0.5Co1.5Fe0.5O5+δ cathode with palladium–rich interface coating

H. J. Choi, J. Koo, G. D. Han, 2021 .

Protonic ceramic fuel cells with slurry-spin coated BaZr0.2Ce0.6Y0.1Yb0.1O3- δ thin-film electrolytes

F. Prinz, J. Shim, Kiho Bae, 2020 .