Hong Wu

发表

Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing

A. Ajji, Shan Wang, A. Saffar, 2015, Chinese Journal of Polymer Science.

Controlled release of diclofenac sodium from polylactide acid-based solid dispersions prepared by hot-melt extrusion

Shaoyun Guo, Hong Wu, Rong Chen, 2016, Journal of biomaterials science. Polymer edition.

The mechanism for the temperature-dependency of the interfacial interaction in polyamide/tin-fluoro-phosphate glass composites

Huan Li, Shaoyun Guo, Hong Wu, 2018 .

Design of tubelike aerogels with macropores from bamboo fungus for fast oil/water separation

Shaoyun Guo, X. Fang, Hong Wu, 2020 .

Effects of cure system and filler on chemical aging behavior of fluoroelastomer in simulated proton exchange membrane fuel cell environment

Shaoyun Guo, Hong Wu, Lichao Xia, 2016 .

Preparation of alginate hydrogels through solution extrusion and the release behavior of different drugs

Shaoyun Guo, Hong Wu, Rong Chen, 2016, Journal of biomaterials science. Polymer edition.

The molecular dynamics of different relaxation modes in asymmetric chlorinated butyl rubber/petroleum resin blends

Shaoyun Guo, Hong Wu, Kangming Xu, 2014 .

Effect of phase morphology on water diffusion in phosphorus-containing thermotropic liquid crystal copolyester film

Yu-Zhong Wang, Shaoyun Guo, Hong Wu, 2013 .

Rheology, morphology, and mechanical properties of HMSPP/POE blends and its alternate layered foam

W. Liang, Shaoyun Guo, Hong Wu, 2015 .

Preparation of a new foam/film structure poly (ethylene-co-octene) foam materials and its sound absorption properties

W. Liang, Shaoyun Guo, Hong Wu, 2015 .

Achieving high electrical conductivity and excellent electromagnetic interference shielding in poly(lactic acid)/silver nanocomposites by constructing large-area silver nanoplates in polymer matrix

Shaoyun Guo, Hong Wu, Ming Wang, 2019, Composites Part B: Engineering.

Construction, mechanism and prospective of conductive polymer composites with multiple interfaces for electromagnetic interference shielding: A review

Shaoyun Guo, Hong Wu, Ming Wang, 2021, Carbon.

Enhanced compatibility of PA6/POE blends by POE-g-MAH prepared through ultrasound-assisted extrusion

Shaoyun Guo, Hong Wu, Hongyu Chen, 2010 .

Toward high efficiency thermally conductive and electrically insulating pathways through uniformly dispersed and highly oriented graphites close-packed with SiC

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2017 .

Simple and Consecutive Melt Extrusion Method to Fabricate Thermally Conductive Composites with Highly Oriented Boron Nitrides.

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2017, ACS applied materials & interfaces.

Flame-retardant poly(vinyl alcohol)/MXene multilayered films with outstanding electromagnetic interference shielding and thermal conductive performances

Xiaoya Liu, Shaoyun Guo, Hong Wu, 2020 .

Ordered stacking of oriented BN in confined space to construct effective heat transfer pathways

Shaoyun Guo, Hong Wu, Shuai Liu, 2021, Polymer.

Simultaneously improved electromagnetic interference shielding and mechanical performance of segregated carbon nanotube/polypropylene composite via solid phase molding

Jie-feng Gao, Zhong‐Ming Li, Dingxiang Yan, 2018 .

The molecular structure of SEBS grafted with maleic anhydride through ultrasound initiation

Shaoyun Guo, Hong Wu, Xianlong Zhang, 2015, Chinese Journal of Polymer Science.

Low magnetic field-induced morphological regulation in isotactic polypropylene/poly(ε-caprolactone)/carbon black composites for high electrical conductivity and conductive anisotropy

Shaoyun Guo, Hong Wu, Kai Zhang, 2018, Composites Communications.

Reinforcement of adhesion and development of morphology at polymer–polymer interface via reactive compatibilization: A review

Shaoyun Guo, Hong Wu, Genjie Jiang, 2010 .

Achieving enhanced interfacial adhesion and highly oriented structure in PA6/Graphite composites for excellent tribological performance

Yiyue Luo, Hong Wu, Jianhui Qiu, 2022, Composites Science and Technology.

In Situ Constructed Nanocrystal Structure and Its Contribution in Shape Memory Performance of Pure Polylactide

J. Qiu, Hong Wu, Chunhai Li, 2022, Industrial & Engineering Chemistry Research.

Effects of ultrasound on the morphology and properties of propylene-based plastomer/nanosilica composites

Shaoyun Guo, Hong Wu, Hongyu Chen, 2011 .

Superior low-temperature mechanical toughness of the PP-based blown micro/nano layer films

Hong Wu, Chunhai Li, Jingxian Qin, 2022, Polymer.

Largely enhanced thermal conductive, dielectric, mechanical and anti-dripping performance in polycarbonate/boron nitride composites with graphene nanoplatelet and carbon nanotube

Hong Wu, Jianfeng Wang, Xiuxiu Jin, 2019, Composites Science and Technology.

Simultaneously enhanced thermal conductivity and mechanical properties of PP/BN composites via constructing reinforced segregated structure with a trace amount of BN wrapped PP fiber

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2020 .

Achieving high-efficiency and robust 3D thermally conductive while electrically insulating hybrid filler network with high orientation and ordered distribution

Hong Wu, Chunhai Li, Lichao Xia, 2018 .

Unique impact behavior and toughening mechanism of the polypropylene and poly(ethylene-co-octene) alternating multilayered blends with superior toughness

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2014 .

Facile fabrication of wood-inspired aerogel from chitosan for efficient removal of oil from Water.

Shaoyun Guo, X. Fang, Hong Wu, 2020, Journal of hazardous materials.

Constructing highly aligned crystalline structure to enhance sliding wear performance of bulk polyamide 6

Shaoyun Guo, J. Qiu, Jing-Bin Chen, 2021, Polymer.

Tunable all-in-one bimodal porous membrane of ultrahigh molecular weight polyethylene for solar driven interfacial evaporation

Hong Wu, Yuhang Guo, Jianhui Qiu, 2022, Separation and Purification Technology.

Ordered multilayer film of (graphene oxide/polymer and boron nitride/polymer) nanocomposites: An ideal EMI shielding material with excellent electrical insulation and high thermal conductivity

Yu-Zhong Wang, Shaoyun Guo, Hong Wu, 2016 .

Synthesis, characterization, and crystallization behaviors of poly(D-lactic acid)-based triblock copolymer

Hong Wu, Xiaolang Chen, Dengfeng Zhou, 2020, Scientific Reports.

Microwave absorbing properties of alternating multilayer composites consisting of poly (vinyl chloride) and multi-walled carbon nanotube filled poly (vinyl chloride) layers

Shaoyun Guo, Jiang Li, Hong Wu, 2016 .

In Situ Formation of Microfibrillar Crystalline Superstructure: Achieving High-Performance Polylactide.

Shaoyun Guo, Jiang Li, Hong Wu, 2017, ACS applied materials & interfaces.

Flame-retardant and Self-healing Biomass Aerogels Based on Electrostatic Assembly

Hong Wu, Shao-yun Guo, Lijuan Zhao, 2020, Chinese Journal of Polymer Science.

Self-healing and recyclable biomass aerogel formed by electrostatic interaction

X. Fang, Hong Wu, Lijuan Zhao, 2019, Chemical Engineering Journal.

Achieving High-Ductile Polylactide Sheets with Inherent Strength via a Compact and Uniform Stress Conduction Network

Shaoyun Guo, Qingwen Wang, Hong Wu, 2020 .

Enhanced flow behaviors of metallocene‐catalyzed linear low‐density polyethylene during ultrasound‐assisted extrusion

Shaoyun Guo, Hong Wu, W. Bao, 2010 .

Static ultrasonic oscillations induced degradation and its effect on the linear rheological behavior of novel propylene based plastomer melts

Shaoyun Guo, Hong Wu, J. Jow, 2007 .

Molecular structure development of metallocene‐catalyzed linear low density polyethylene under ultrasonic irradiation

Zhen Li, Shaoyun Guo, Hong Wu, 2005 .

A Study on Compatibility and Properties of POE/PS/SEBS Ternary Blends

Shaoyun Guo, Hong Wu, Genjie Jiang, 2007 .

Effect of organic grafting expandable graphite on combustion behaviors and thermal stability of low‐density polyethylene composites

Hong Wu, Dezhao Wang, Xiaolang Chen, 2020, Polymer Composites.

Realizing simultaneous reinforcement and toughening in polypropylene based on polypropylene/elastomer via control of the crystalline structure and dispersed phase morphology

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2016 .

Morphological evolution and toughening mechanism of polypropylene and polypropylene/poly(ethylene-co-octene) alternating multilayered materials with enhanced low-temperature toughness

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2014 .

Synergistic effects of expandable graphite with magnesium hydroxide on the flame retardancy and thermal properties of polypropylene

Shaoyun Guo, Jie Yu, Hong Wu, 2007 .

An Environmentally Friendly Nanohybrid Flame Retardant with Outstanding Flame-Retardant Efficiency for Polypropylene

Hong Wu, Xiaolang Chen, Jianbing Guo, 2021 .

Progress on the layer-by-layer assembly of multilayered polymer composites: Strategy, structural control and applications

Shaoyun Guo, Jiang Li, Hong Wu, 2019, Progress in Polymer Science.

Competitive growth of α- and β-transcrystallinity in isotactic polypropylene induced by the multilayered distribution of α-nucleating agents: Toward high mechanical performances

Shaoyun Guo, Hong Wu, Zhuo Zheng, 2019, Chemical Engineering Journal.

Structural Evolution and Toughening Mechanism of β-Transcrystallinity of Polypropylene Induced by the Two-Dimensional Layered Interface during Uniaxial Stretching

Shaoyun Guo, Jiang Li, Hong Wu, 2017, ACS omega.

Effect of the Material of Construction of Die on Processing Behavior of Metallocene-Catalyzed Linear Low Density Polyethylene

Shaoyun Guo, Hong Wu, Guangshun Chen, 2004 .

Ultrasonic oscillations effect on rheological and processing properties of metallocene‐catalyzed linear low density polyethylene

Shaoyun Guo, Hong Wu, Guangshun Chen, 2003 .

Brittle-ductile transition behavior of the polypropylene/ultra-high molecular weight polyethylene/olefin block copolymers ternary blends: Dispersion and interface design

Shaoyun Guo, Hong Wu, Chunhai Li, 2019, Polymer.

Achieving directional migration of hindered phenols in polymer‐based damping hybrid via the construction of alternating layers

Shaoyun Guo, Hong Wu, Kangming Xu, 2020 .

Designing a Polymer-Based Hybrid with Simultaneously Improved Mechanical and Damping Properties via a Multilayer Structure Construction: Structure Evolution and a Damping Mechanism

Shaoyun Guo, Hong Wu, Kangming Xu, 2020, Polymers.

Degradation kinetics and molecular structure development of hydroxyethyl cellulose under the solid state mechanochemical treatment

Shaoyun Guo, Hong Wu, Rong-Yi Chen, 2010 .

Solid state mechano-chemical grafting copolymerization of hydroxyethyl cellulose with acrylic acid

Shaoyun Guo, Hong Wu, Rong-Yi Chen, 2009 .

Molecular insights into hydrogen bonds in polyurethane/hindered phenol hybrids: evolution and relationship with damping properties

Shaoyun Guo, Hong Wu, Kangming Xu, 2014 .

Effect of chain length of polyisobutylene oligomers on the molecular motion modes of butyl rubber: Damping property

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2018 .

The study of damping property and mechanism of thermoplastic polyurethane/phenolic resin through a combined experiment and molecular dynamics simulation

Shaoyun Guo, Hong Wu, W. Gao, 2018, Journal of Materials Science.

In-depth analysis on thermal phase transition mechanism of main-chain phosphorus-containing thermotropic liquid crystal copolyester

Yu-Zhong Wang, Hong Wu, Xianlong Zhang, 2016 .

Effect of pentaerythritol and organic tin with calcium/zinc stearates on the stabilization of poly(vinyl chloride)

Shaoyun Guo, Hong Wu, Jiayou Xu, 2006 .

Synergistic effects of red phosphorus masterbatch with expandable graphite on the flammability and thermal stability of polypropylene/thermoplastic polyurethane blends

Hong Wu, Xiaolang Chen, Lingtong Li, 2020, Polymers and Polymer Composites.

Constructing a dense dual network of edge-selectively carboxylated graphene in polyamide composites to achieve excellent gas barrier property

Shaoyun Guo, Hong Wu, Ying Guo, 2021, Composites Science and Technology.

Effect of high‐energy vibro‐milling of filler on the mechanical properties of filled high‐density polyethylene

Shaoyun Guo, Hong Wu, Xiangrong Chen, 2003 .

Combustion Characteristics of Polypropylene/Magnesium Hydroxide/Expandable Graphite Composites

Shaoyun Guo, Jie Yu, Hong Wu, 2009 .

Robust electromagnetic interference shielding, joule heating, thermal conductivity, and anti-dripping performances of polyoxymethylene with uniform distribution and high content of carbon-based nanofillers

Hong Wu, Ming Wang, Jie Li, 2021 .

Understanding the Role of Carbon Fiber Skeletons in Silicone Rubber-Based Ablative Composites

Ning Yan, Hong Wu, Shida Han, 2022, Polymers.

Synergetic effect of aramid fiber and carbon fiber to enhance ablative resistance of EPDM-based insulators via constructing high-strength char layer

Shaoyun Guo, N. Yan, Hong Wu, 2021 .

Constructing multiple interfaces in polydimethylsiloxane/multi-walled carbon nanotubes nanocomposites by the incorporation of cotton fibers for high-performance electromagnetic interference shielding and mechanical enhancement

Shaoyun Guo, Hong Wu, Ming Wang, 2019, Applied Surface Science.

Low magnetic field-induced alignment of nickel particles in segregated poly(l-lactide)/poly(ε-caprolactone)/multi-walled carbon nanotube nanocomposites: Towards remarkable and tunable conductive anisotropy

Shaoyun Guo, Hong Wu, Ming Wang, 2018, Chemical Engineering Journal.

Effects of MWCNTs on Char Layer Structure and Physicochemical Reaction in Ethylene Propylene Diene Monomer Insulators

Ning Yan, Hong Wu, Shida Han, 2022, Polymers.

Improvement of hardness and compression set properties of EPDM seals with alternating multilayered structure for PEM fuel cells

Hong Wu, Shaoyun Guo, Shaoyun Guo, 2016 .

Extensional flow-induced hybrid crystalline fibrils (shish) in CNT/PLA nanocomposite

Shaoyun Guo, Hong Wu, Xi Zhang, 2018 .

Factors influencing the performance of cement emulsified asphalt mortar – A review

Hong Wu, Jiusu Li, Zhu Zhang, 2021 .

Constructing interconnected asymmetric conductive network in TPU fibrous Film: Achieving low-reflection electromagnetic interference shielding and surperior thermal conductivity

Shengdu Yang, Hong Wu, Zhuyu Ma, 2023, Carbon.

Injection Molded Segregated Carbon Nanotube/Polypropylene Composite for Efficient Electromagnetic Interference Shielding

Jie-feng Gao, Zhong‐Ming Li, Dingxiang Yan, 2018, Industrial & Engineering Chemistry Research.

Highly Efficient and Reliable Transparent Electromagnetic Interference Shielding Film.

Zhong‐Ming Li, Dingxiang Yan, Hong Wu, 2018, ACS applied materials & interfaces.

A strong and tough polymer–carbon nanotube film for flexible and efficient electromagnetic interference shielding

Zhong‐Ming Li, Meng-Zhu Li, Dingxiang Yan, 2017 .

Graphene and graphene derivatives toughening polymers: Toward high toughness and strength

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2019, Chemical Engineering Journal.

Sandwich-Structured Surface Coating of a Silver-Decorated Electrospun Thermoplastic Polyurethane Fibrous Film for Excellent Electromagnetic Interference Shielding with Low Reflectivity and Favorable Durability.

Hong Wu, Shaoyun Guo, Yang Zhang, 2022, ACS applied materials & interfaces.

Preparation of alternating multilayered polyethylene oxide/poly(ε-caprolactone) and the confined crystallization of the composites

Shaoyun Guo, Jiang Li, Hong Wu, 2015 .

Effect of Interfacial Interaction on Morphology and Properties of Polyethylene/Boron Nitride Thermally Conductive Composites

Shaoyun Guo, Hong Wu, Xianlong Zhang, 2015 .

Mechanically Strong and Ductile Polypropylene/Poly(ethylene-co-octene) Blends Prepared Through Multistretched Extrusion: Morphological Evolution, Toughening, and Reinforcing Mechanism

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2018 .

Versatile Melanin-Like Coatings with Hierarchical Structure toward Personal Thermal Management, Anti-Icing/Deicing, and UV Protection.

Qi Zhang, Hong Wu, Zhiheng Zhao, 2023, ACS applied materials & interfaces.

Constructing tunable bimodal porous structure in ultrahigh molecular weight polyethylene membranes with enhanced water permeance and retained rejection performance

Shaoyun Guo, Hong Wu, Chunhai Li, 2021 .

Effect of Interfacial Structure on Crystallization Behavior of Polypropylene/Polyolefin Elastomer/Barium Sulfate Ternary Composites

Zhen Li, Shaoyun Guo, Hong Wu, 2007 .

Enhanced sound insulation and mechanical properties of LDPE/mica composites through multilayered distribution and orientation of the mica

W. Liang, Shaoyun Guo, Hong Wu, 2016 .

Analysis of crystalline structure and morphology of isotactic polypropylene under the coexistence of organic montmorillonite particles and shear flow

Shaoyun Guo, Jiang Li, Hong Wu, 2016 .

Morphology and Properties of Polypropylene Foaming Sheet with Alternating Multilayered Structure

W. Liang, Shaoyun Guo, Hong Wu, 2015 .

Crystallization kinetics behavior, molecular interaction, and impact-induced morphological evolution of polypropylene/poly(ethylene-co-octene) blends: insight into toughening mechanism

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2014, Journal of Polymer Research.

Ultrasound initiated functionalization of SEBS with maleic anhydride

Shaoyun Guo, Hong Wu, Xianlong Zhang, 2013 .

Novel Structure to Improve Mechanical Properties of Polymer Blends: Multilayered Ribbons

Shaoyun Guo, Hong Wu, Chunhai Li, 2020 .

Effects of ultrasonic oscillations on linear viscoelastic behaviors of metallocene‐catalyzed linear low density polyethylene and its blends with low density polyethylene

Zhen Li, Shaoyun Guo, Hong Wu, 2005 .

Effects of ultrasonic oscillations on processing behavior and mechanical properties of metallocene‐catalyzed linear low‐density polyethylene/low‐density polyethylene blends

Shaoyun Guo, Hong Wu, Guangshun Chen, 2004 .

Processing temperature‐dependent distribution of multiwall carbon nanotube in poly(ethylene‐ co ‐1‐octene)/high density polyethylene for electrical conductivity and microwave shielding enhancement

Hong Wu, Ming Wang, Jiabin Shen, 2020, Polymer Composites.

Maleic anhydride/styrene melt grafting and crosslinking onto ethylene‐octene copolymer

Shaoyun Guo, Jie Yu, Hong Wu, 2008 .

In Situ Formation of Soft–Rigid Hybrid Fibers Decorated by Sparse Lamellae of PLLA: Achieving Ductile and Heat-Resistant Materials with High Strength

P. Liu, Hong Wu, Jianhui Qiu, 2023, Macromolecules.

Constructing 3D interconnected CNTs network in PA6 composites with well-dispersed UHMWPE for excellent tribological and heat dissipation properties

Hong Wu, Qianzhu Li, Jiaming Zhu, 2022, Composites Part B: Engineering.

Effect of a tie film on the enhanced interfacial adhesion between polyethylene and polyamide-6 in a sequential injection molding

Shaoyun Guo, Hong Wu, Bowen Yan, 2010 .

Reinforced thermal conductivity and mechanical properties of in situ microfibrillar composites through multistage stretching extrusion

Yu-Zhong Wang, Shaoyun Guo, Hong Wu, 2017 .

Enhanced thermally conductivity and mechanical properties of polyethylene (PE)/boron nitride (BN) composites through multistage stretching extrusion

Shaoyun Guo, Hong Wu, Xianlong Zhang, 2013 .

Modified expandable graphite as an effective flame retardant for LLDPE/EVA composites filled with Mg(OH)2/Al(OH)3

Hong Wu, Xiaolang Chen, Weidi He, 2020, Journal of Thermoplastic Composite Materials.

Structure and property of injection‐molded polypropylene along the flow direction

Shaoyun Guo, Jiang Li, Hong Wu, 2009 .

The damping and flame-retardant properties of poly(vinyl chloride)/chlorinated butyl rubber multilayered composites

Shaoyun Guo, Hong Wu, Kangming Xu, 2015 .

Multilayered damping composites with damping layer/constraining layer prepared by a novel method

Shaoyun Guo, Hong Wu, Kangming Xu, 2014 .

Damping mechanism and different modes of molecular motion through the glass transition of chlorinated butyl rubber and petroleum resin blends

Shaoyun Guo, Chao-liang Zhang, Hong Wu, 2014 .

Morphologies and properties of polycarbonate/polyethylene in situ microfibrillar composites prepared through multistage stretching extrusion

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2014 .

Ultrasound initiated maleic anhydride grafted onto a novel polypropylene copolymer

Shaoyun Guo, Hong Wu, J. Jow, 2012 .

Comparative Studies on Enhanced Interfacial Adhesion between PE and PA6 through Two Routes in a Sequential Injection Molding Process

Shaoyun Guo, Hong Wu, Bowen Yan, 2014 .

Development of Nanolayer Blown Film Technology

Hong Wu, Chunhai Li, Jingxian Qin, 2022, Industrial & Engineering Chemistry Research.

Construction of hybrid graphene oxide/graphene nanoplates shell in paraffin microencapsulated phase change materials to improve thermal conductivity for thermal energy storage

Shaoyun Guo, Hong Wu, Chunhai Li, 2020 .

Molecular insights into the damping mechanism of poly(vinyl acetate)/hindered phenol hybrids by a combination of experiment and molecular dynamics simulation

Shaoyun Guo, Hong Wu, Kangming Xu, 2015 .

Robust quasi-solid-state integrated asymmetric flexible supercapacitors with interchangeable positive and negative electrode based on all-conducting-polymer electrodes

Shaoyun Guo, E. Sakai, Hong Wu, 2021 .

Ultrathin Bimodal Porous Membranes with Uniform Small Pores Separated by Laminated Large Pores for Efficient Water Separation

Hong Wu, Yuhang Guo, Jianhui Qiu, 2023, Materials & Design.

Enhanced in-plane thermal conductivity of ultrahigh molecular weight polyethylene films via a new design of a two-step biaxial stretching mode

Shaoyun Guo, Hong Wu, Chunhai Li, 2021, Polymer Journal.

Reinforcement of Solid-Melt Interfaces for Semicrystalline Polymers in a Sequential Two-Staged Injection Molding Process

Shaoyun Guo, Hong Wu, Bowen Yan, 2009 .

Conformational Regulation and Crystalline Manipulation of PLLA through a Self-Assembly Nucleator.

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2017, Biomacromolecules.

Highly Efficient Dispersion of Individual Multiwalled Carbon Nanotubes by Polylactide in High Elastic State

Hong Wu, Jianhui Qiu, Shaoyun Guo, 2023, Industrial & Engineering Chemistry Research.

Effect of the temperature gradient on the interfacial strength of polyethylene/polyamide 6 during the sequential injection molding

Shaoyun Guo, Hong Wu, Xianlong Zhang, 2014 .

Achieving high-performance poly (styrene-b-ethylene-ranbutylene-b-styrene) nanocomposites with tannic acid functionalized graphene oxide

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2018 .

Understanding in crystallization of polyethylene: the role of boron nitride (BN) particles

Yu-Zhong Wang, Shaoyun Guo, Hong Wu, 2015 .

Polyimide reinforced with hybrid graphene oxide @ carbon nanotube: Toward high strength, toughness, electrical conductivity

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2017 .

Improved processing behaviors and mechanical properties of polyolefin elastomer blends prepared by ultrasound‐assisted extrusion

Shaoyun Guo, Hong Wu, Genjie Jiang, 2009 .

Effects of ultrasonic oscillations on rheological behavior and mechanical properties of novel propylene‐based plastomers

Shaoyun Guo, Hong Wu, J. Jow, 2007 .

Synergistic Effect of Ultrasound and Polyethylene Glycol on the Mechanism of the Controlled Drug Release from Polylactide Matrices

Shaoyun Guo, Hong Wu, Rong Chen, 2019, Polymers.

Effect of Ultrasound on Molecular Structure Development of Polylactide

A. Kelly, Shaoyun Guo, Hong Wu, 2014 .

IMPROVED PROPERTIES OF METALLOCENE-CATALYZED LINEAR LOW-DENSITY POLYETHYLENE/POLYPROPYLENE BLENDS DURING ULTRASONIC EXTRUSION

Hong Wu, Shao-yun Guo, 2007 .

The enhancement mechanism of flowability and modulus of PET/TFP‐glass composites

Shaoyun Guo, Hong Wu, Shuai Liu, 2018, Polymer Composites.

Effect of Ultrasonic Oscillations on Weld Line Strength of PS, PMMA, and Their Blends

Hong Wu, Shaoyun Guo, Shaoyun Guo, 2006 .

In-situ constructing highly oriented ductile poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanoribbons: Towards strong, ductile, and good heat-resistant polylactic-based composites.

Hong Wu, Chunhai Li, Shaoyun Guo, 2022, International journal of biological macromolecules.

Selectively multilayered distribution of stereocomplex crystallite and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) ribbons to achieve highly ductile and strong poly(l-lactide) composites.

P. Liu, Hong Wu, Shaoyun Guo, 2023, International journal of biological macromolecules.

High strength injection molding welding and interface crystal phase changes in polyamide 6

Wei Zhao, E. Sakai, Hong Wu, 2023, Polymer Engineering & Science.

The toughening behavior of the PP/POE alternating multilayered blends under EWF and impact tensile methods

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2015, Chinese Journal of Polymer Science.

Effect of tunable styrene content on achieving high-performance poly(styrene-b-ethylene-ran-butylene-b-styrene)/graphene oxide nanocomposites

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2018, Composites Science and Technology.

Fabrication of wear-resistant PA6 composites with superior thermal conductivity and mechanical properties via constructing highly oriented hybrid network of SiC-packed BN platelets

Hong Wu, Yang Pan, Jianhui Qiu, 2022, Journal of Materials Science & Technology.

Biomineralization-Inspired Copper Sulfide Decorated Aramid Textiles via In Situ Anchoring toward Versatile Wearable Thermal Management.

Hong Wu, Bingbing Zeng, Xudong Song, 2023, Small.

Simple and Consecutive Melt Extrusion Method to Fabricate Thermally Conductive Composites with Highly Oriented Boron Nitrides.

Shaoyun Guo, Hong Wu, Jianfeng Wang, 2017, ACS applied materials & interfaces.

Controlled directional drug release from poly(ε-caprolactone)/polyethylene oxide/metoprolol tartrate composites with multi-layered structures

Hong Wu, Rong Chen, Gui-lin Liu, 2022, Composites Part A: Applied Science and Manufacturing.