D. Ha

发表

Crystal alignment of a LiNi0.5Mn0.3Co0.2O2 electrode material for lithium ion batteries using its magnetic properties

Cham Kim, Yeokyung Yang, David Humberto Lopez, 2020 .

Magnetic force on a magnetic particle within a high gradient magnetic separator

S. Baik, D. Ha, J. Kwon, 2013 .

Improvement in Stability and Operating Characteristics of HTS Coil Using MIT Material

J. Hur, Y. Jo, Ho Min Kim, 2017, IEEE Transactions on Applied Superconductivity.

Texture development of a multi-filamentary Bi/sub 2/Sr/sub 2/Ca/sub 2/Cu/sub 3/O/sub x/ HTS tape during thermo-mechanical treatment

K. Ryu, D. Ha, S. Oh, 2003 .

Bending Strain Characteristics of Critical Current in Double-Layered Bi-2223 Superconducting Tapes

D. Ha, J. Dizon, Hyung-Seop Shin, 2008, IEEE Transactions on Applied Superconductivity.

Deformation and I$_rm c$Degradation Behavior in Bent Bi-2223 Tapes Under Pressurized Liquid Nitrogen

D. Ha, J. Dizon, Hyung-Seop Shin, 2006, IEEE Transactions on Applied Superconductivity.

Separation of Steel Slag From Landfill Waste for the Purpose of Decontamination Using a Superconducting Magnetic Separation System

D. Ha, Jee-Eun Kim, Young-Hun Kim, 2015, IEEE Transactions on Applied Superconductivity.

Ic degradation behavior in Bi-2223 superconducting tapes under torsional deformation

D. Ha, Hyung-Seop Shin, H. Ha, 2003 .

Variation of Local Critical Current Due to Mechanical Strain in RCE-REBCO Coated Conductors

D. Ha, J. Dizon, Hyung-Seop Shin, 2014, IEEE Transactions on Applied Superconductivity.

A comparison of strain effect on critical current in Bi-2223 superconducting tapes in different bending modes

Dong-Kyun Ko, D. Ha, Hyung-Seop Shin, 2003 .

Mixed Rare Earth $({\rm Nd}_{1/3}{\rm Eu}_{1/3}{\rm Gd}_{1/3}){\rm Ba}_{2}{\rm Cu}_{3}{\rm O}_{7-{\rm d}}$ Thin Films by PLD for Coated Conductor

M. Sohn, Chan Park, D. Ha, 2009, IEEE Transactions on Applied Superconductivity.

Purification of the Coolant for Hot Roller by Superconducting Magnetic Separation

M. Sohn, S. Baik, D. Ha, 2010, IEEE Transactions on Applied Superconductivity.

Influence of Ge addition on phase formation and electromagnetic properties in internal tin processed Nb/sub 3/Sn wires

K. Ryu, D. Ha, H. Baik, 2001 .

The effects of drawing parameters on sausaging and critical current density of Bi-2223/Ag HTS wires

K. Ryu, D. Ha, Sang-Chul Kim, 2001 .

Effect of Filament Configuration on Critical Current Density of Bi2212/Ag Wires With Low Ag Ratio

D. Ha, I. Han, H. Sohn, 2008, IEEE Transactions on Applied Superconductivity.

Effect of solution concentration on the surface properties of Y2O3 solution-coated film on flexible Metal Substrate

Chan Park, D. Ha, R. Ko, 2013, Metals and Materials International.

Magnetic field analysis of high gradient magnetic separator via finite element analysis

S. Baik, D. Ha, J. Kwon, 2012 .

Development of long-length SmBCO coated conductors using a batch-type reactive co-evaporation method

S. Yoo, D. Ha, H. Kim, 2008 .

Critical current density of SmBCO coated conductor on IBAD-MgO substrate fabricated by co-evaporation

Chan Park, S. Yoo, D. Ha, 2007 .

The deposition of Sm1Ba2Cu3O7−δ on SrTiO3 using co-evaporation method

Chan Park, D. Ha, T. H. Kim, 2007 .

Influence of Applied Tensile and Bending Strains on Local and Overall Critical Current of Multifilamentary Bi2223-Composite Superconductor

M. Hojo, H. Okuda, D. Ha, 2007 .

A Monte Carlo–shear lag simulation of tensile fracture behaviour of Bi2223 filament

H. Okuda, D. Ha, M. Tanaka, 2005 .

Decontamination of Cesium From Contaminated Water Using a Selective Adsorbent and Magnetic Separation

D. Ha, Jee-Eun Kim, Young-Hun Kim, 2016, IEEE Transactions on Applied Superconductivity.

Quench characteristics of Bi-2223 coil at liquid helium temperature

K. Ryu, W. Nah, D. Ha, 1999, IEEE Transactions on Applied Superconductivity.

Reversible tensile strain dependence of the critical current in YBCO coated conductor tapes

D. Ha, T. H. Kim, J. Dizon, 2007 .

Critical Current Degradation Behavior in YBCO Coated Conductors Under Torsional Strain

D. Ha, J. Dizon, Sang-soo Oh, 2007, IEEE Transactions on Applied Superconductivity.

Study on thermo-mechanical treatment in fabrication of Bi2212 /Ag HTS wire

S. C. Kim, C. Bruzek, D. Ha, 2007 .

Formation of iron oxides from acid mine drainage and magnetic separation of the heavy metals adsorbed iron oxides

D. Ha, Young-Hun Kim, Hee-Won Kwon, 2016 .

Superconducting Magnetic Separation of Powdered Activated Carbon From Aqueous Phase

D. Ha, Young-Hun Kim, Hee-Won Kwon, 2014, IEEE Transactions on Applied Superconductivity.

The effect of solvent treatments and aging on the superconducting properties of MgB2 materials

S. Yoo, D. Ha, T. H. Kim, 2007 .

The effect of nano-powder additions on the superconducting properties of MgB/sub 2/

E.Y. Lee, G. Rim, Y.K. Kwon, 2005, IEEE Transactions on Applied Superconductivity.

The effect of geometry of composite MgB2/stainless-steel (SS) wires fabricated by PIT process on the superconducting properties

D. Ha, R. Ko, S. Kim, 2004 .

Fabrication of In-Situ ${\rm MgB}_{2}$ Films Using Evaporation and Sputtering Simultaneous Deposition Technique

Chan Park, D. Ha, R. Ko, 2009, IEEE Transactions on Applied Superconductivity.

Ultra-large current transport in thick SmBa2Cu3O7−x films grown by reactive co-evaporation

Y. Jo, W. Jo, D. Ha, 2015 .

Repairing Locally Defective Coated Conductors by Adhering a Thin Superconducting Patch

D. Ha, R. Ko, Gwan-tae Kim, 2020 .

Superconducting joint of reacted Bi-2223/Ag multi-filamentary tapes

K. Ryu, D. Ha, Sang-Chul Kim, 2001 .

Preparation of Bi-2223 Tapes by Partial-Melt Process

K. Ryu, M. Sohn, D. Jeong, 1992 .

Microstructural investigation of phases and pinning properties in MBa2Cu3O7−x (M = Y and/or Gd) coated conductors produced by scale-up facilitie

Y. Jo, W. Jo, D. Ha, 2016 .

Estimation of Young's modulus, residual strain and intrinsic fracture strain of Bi2212 filaments in Bi2212/Ag/Ag alloy composite wire

S. C. Kim, H. Okuda, D. Ha, 2008 .

Analysis of the residual strain change of Bi2212, Ag alloy and Ag during the heating and cooling process in Bi2212/Ag/Ag alloy composite wire

S. C. Kim, H. Okuda, D. Ha, 2008 .

Uniformity Characteristics of Bi2212 Tubes Depending on Cooling Conditions

D. Ha, G. Jang, N.I. Lee, 2007, IEEE Transactions on Applied Superconductivity.

Process parameter dependent characteristics of centrifugally formed HTS Bi-2212 tubes

T. Sung, D. Ha, G. Jang, 2005, IEEE Transactions on Applied Superconductivity.

The Effect of Processing Parameters on HTS Tube Characteristics

T. Sung, D. Ha, G. Jang, 2004 .

Selective Removal of Pb From Aqueous Phase by HGMS and Ion-Imprinted Magnetic Adsorbent

D. Ha, Young-Hun Kim, Hee-Won Kwon, 2021, IEEE Transactions on Applied Superconductivity.

Magnetic Properties of $ [\hbox{Ni}_{97{\rm at.}\%}$-W$_{3{\rm at.}\%}]_{{100}-{x}}$-Cu$_x$ Textured Substrates for Coated Conductors

S. Yoo, D. Ha, R. Ko, 2007, IEEE Transactions on Applied Superconductivity.

The KSTAR project: An advanced steady state superconducting tokamak experiment

J. H. Schultz, W. Reiersen, Yong-Seok Hwang, 2000 .

Dependence of superconducting properties and microstructure on heat treatment in Ag-sheathed BiPbSrCaCuO tapes

K. Ryu, M. Sohn, Y. C. Kim, 1991 .

Fabrication and thermoelectric properties of crystal-aligned nano-structured Bi2Te3

Dong-Woo Ha, Cham Kim, Hoyoung Kim, 2011 .

Crystal alignment of a LiFePO4 cathode material for lithium ion batteries using its magnetic properties

Cham Kim, Hoyoung Kim, Yeokyung Yang, 2019, RSC advances.

Magnetic Properties of Ni -W -Cu Textured Substrates for Coated Conductors

D. Ha, H. Kim, R. Ko, 2007 .

Progress in research and development for REBCO coated conductors by reactive co-evaporation

Haigun Lee, S. Yoo, D. Ha, 2013 .

Deposition of LaMnO3 buffer layer on IBAD-MgO template by reactive DC sputtering

S. Yoo, D. Ha, T. H. Kim, 2009 .

Stability and Quench Behaviors of Conduction-Cooled 2G HTS Coil Cowound With SS Tape

K. Seong, M. Sohn, D. Ha, 2016, IEEE Transactions on Applied Superconductivity.

Analysis of the correlation between n-value and critical current in bent multifilamentary Bi2223 composite tape based on a damage evolution model

M. Hojo, H. Okuda, D. Ha, 2012 .

Ic degradation behaviors of Bi-2223 superconducting tapes under axial fatigue loading

Ki‐Hyun Kim, D. Ha, J. Dizon, 2006 .

Low temperature deposition of LaMnO 3 on IBAD-MgO template assisted by plasma

D. Ha, S. Moon, R. Ko, 2012 .

Sample-length dependence of the critical current of slightly and significantly bent-damaged Bi2223 superconducting composite tape

H. Okuda, D. Ha, S. Oh, 2007 .

Distribution of local critical current along sample length and its relation to overall current in a long Bi2223/Ag superconducting composite tape

H. Okuda, D. Ha, S. Oh, 2006 .

Quench Detection of HTS Current Lead Using Hall Probe

J. Bae, D. Ha, B. Eom, 2014, IEEE Transactions on Applied Superconductivity.

1.5 kA Bi-2223 HTS current leads for SMES magnets

Hae-Jong Kim, Ki-Chul Seong, Hyun-Man Jang, 2001 .

Thermal Characteristics of 2G HTS Tape With Anodized Aluminum Stabilizer for Cryogen-Free 2G HTS Magnet

J. Bae, D. Ha, Y. W. Jeong, 2015, IEEE Transactions on Applied Superconductivity.

Bubbling in the fabrication of Bi-2223/Ag wires using PIT process

K. Ryu, D. Ha, Young-kil Kwon, 2002 .

Simulation for prediction of distribution of critical current among specimens under low applied bending strains near the average irreversible strain in Bi2223 composite tape

H. Okuda, D. Ha, M. Fujimoto, 2010 .

Simulation on the relation of distribution of overall critical transport current to that of local one in bent-damaged Bi2223 superconducting composite tape

H. Okuda, D. Ha, M. Fujimoto, 2009 .

Residual and fracture strains of Bi2223 filaments and their relation to critical current under applied bending and tensile strains in Bi2223∕Ag∕Ag alloy composite superconductor

H. Okuda, D. Ha, M. Sato, 2008 .

Influence of transverse compressive stress on Ic degradation of Ag alloy sheathed Bi-2223 tapes

K. Ryu, D. Ha, S. Oh, 2004 .

Application of reflow soldering method for laminated high temperature superconductor tapes

D. Ha, R. Ko, Hosup Kim, 2010 .

Estimation of critical current of bent Bi2223 composite tape by application of superconducting core shape-incorporated model

D. Ha, Sang-soo Oh, 落合庄治郎, 2007 .

Fabrication of Bi-2223 HTS magnet with a superconducting switch

K. Ryu, Y. Iwasa, B. Haid, 2001 .

Distribution of normalized critical current of bent multifilamentary Bi2223 composite tape

H. Okuda, D. Ha, M. Fujimoto, 2009 .

Simulation on the relation of distribution of overall critical transport current to that of local one in bent-damaged Bi2223 superconducting composite tape

H. Okuda, D. Ha, M. Fujimoto, 2009 .

Degradation behavior of critical current in Bi-2223 tapes in bending–tension strain mode

D. Ha, Sang-soo Oh, H. Shin, 2004 .

Purification of Wastewater From Paper Factory by Superconducting Magnetic Separation

M. Sohn, S. Baik, D. Ha, 2010, IEEE Transactions on Applied Superconductivity.

Treatment of Coolant of Hot Rolling Process by High Gradient Magnetic Separation

D. Ha, H. Ha, Sang-soo Oh, 2007, IEEE Transactions on Applied Superconductivity.

Study on fabricated RF coil using high-temperature superconductor tape and matching circuit for low field MRI system

M. Sohn, D. Ha, C. Mun, 2012 .

Development of Bi-2223 HTS Tape and Its Application to Coil and Current Leads

K. Ryu, D. Ha, S. Oh, 2001 .

Magnetic Field Dependence of Critical Current in Sm1+xBa2Cu3+yO7−d Coated Conductors Fabricated by Reactive Co-evaporation Method

D. Ha, K. Chung, Homin Kim, 2015 .

Magnetic Field Dependence of Critical Current in Sm1+xBa2Cu3+yO7−d Coated Conductors Fabricated by Reactive Co-evaporation Method

D. Ha, K. Chung, Hosup Kim, 2014, Journal of Superconductivity and Novel Magnetism.

Vortex pinning in artificially layered Ba(Fe,Co)2As2 film

M. S. Seo, Sanghan Lee, D. Ha, 2018, Cryogenics.

The flux pinning enhancement of YBCO film prepared by PLD using composite targets doped with BaZrO3 nanopowder

Chan Park, M. Dixit, S. Yoo, 2006 .

Preparation of Magnetic Fe-Al Binary Oxide and Its Application in Superconducting Magnetic Separation

M. Sohn, S. Baik, D. Ha, 2013, IEEE Transactions on Applied Superconductivity.

Fabrications and properties of MgB/sub 2//stainless-steel tapes by PIT process

M. Sohn, D. Ha, R. Ko, 2003 .

Single-filament composite MgB2/stainless-steel ribbons by powder-in-tube process

K. Ryu, M. Sohn, D. Ha, 2001, cond-mat/0106124.