Shigeru Hoyashita

发表

Calculation Method for Profile of Helical Gear with Tooth-Trace Modification Finished by Worm-Shaped Tool or Form Grinding Wheel.

Shigeru Hoyashita, S. Hoyashita, 1995 .

Static load sharing between contacting gear teeth with the tip relief.

Satoru Ezoe, Shigeru Hoyashita, Shigetada Tanaka, 1988 .

Basic Study on Barreling Process of Gear

Hiroki Koga, Shigeru Hoyashita, 2004 .

Effects of tooth heights on noise and vibration of mirrorlike ground gears.

Yong Chen, Yuji Yoshitomi, Akira Ishibashi, 1991 .

Effects of Difference in Roller Hardness on Rolling Contact Fatigue : Vibration, Control Engineering, Engineering for Industry

Akira Ishibashi, Shigeru Hoyashita, 1987 .

A Calculation Method of Cutting-Edge profile of Shaving Cutter for Finishing Gear with Arbitrary Tooth Profile. Conventional and Plunge-Cut Shaving Cutter.

Shigeru Hoyashita, 1995 .

New Release Ports Applicable to High-Pressure Gear Pumps and Their Effectiveness

Akira Ishibashi, Shigeru Hoyashita, Satoru Muta, 1991 .

Gear Pumps with New Release Ports Suitable for Various Running Conditions : Theory for the Release Ports and Some Experimental Results

Akira Ishibashi, Shigeru Hoyashita, Satoru Muta, 1989 .

Design, Manufacture and Performance of Internal Gear Pumps : 2nd Report, Design Methods for Increasing Specific Delivery and Performance of Trial-Made Gear Pumps

Akira Ishibashi, Shigeru Hoyashita, Tomonobu Otsu, 1985 .

Reduction in noise and vibration levels of spur gears achieved by mirror-like grinding and profile modification of teeth.

Yong Chen, Akira Ishibashi, Satoru Ezoe, 1990 .

Calculation Method of Cutting-Edge Profile of Globoidal Worm-Shaped Tool for Finishing Helical Gear.

Makoto Imamura, Shigeru Hoyashita, 1995 .

Paper x (ii) Evaluation of Efficiencies and Speed Ratios of CVT's with Planetary Cones

Shigeru Hoyashita, Akira Ishibashi, H. Takedomi, 1991 .

Studies for Highly Qualifing Case-Carburized and Hardened Steel Gear Using Shot Peening and Barrelling Processes.

Shigeru Hoyashita, Munetoh Hashimoto, 1998 .

New release ports applicable to high-pressure gear pumps and their effectiveness.

Akira Ishibashi, Shigeru Hoyashita, Satoru Muta, 1990 .

A Study for Calculating Cutting-Edge Profiles of Any Type of Tools for Finishing Cylindrical Gears. For Cylindrical Worm Shaped Tool and Form Grinding Wheel.

Akira Ishibashi, Shigeru Hoyashita, 1994 .

A Variable-Speed Traction Drive with Internal Spherical Disks : Mechanism of Traction Drive and Method for Calculating Power Transmission Efliciency

Akira Ishibashi, Shigeru Hoyashita, Hiroshi Nagata, 1991 .

Remarkable effects of running-in upon surface durability of steel and bronze

Shigeru Hoyashita, Akira Ishibashi, 1982 .

Traction Characteristics of Lubricating Oil under High Pressure : 1st Report, Traction Coefficients at Mean Pressures up to 2.7 GPa

Shigeru Hoyashita, Akira Ishibashi, Keizi Sonoda, 1985 .