Julian Proenza

发表

Fixed Priority Schedulability Analysis of a Distributed Real-Time Fault Tolerant Architecture

Guillem Bernat, José Miró-Julià, Julian Proenza, 1997, PDPTA.

Guest Editorial Special Section on Communication in Automation

Julian Proenza, Stefano Vitturi, Thilo Sauter, 2016, IEEE Trans. Ind. Informatics.

Julian Proenza, Matias Bonet, Gabriel Donaire, 2007, 2007 IEEE Conference on Emerging Technologies and Factory Automation (EFTA 2007).

First implementation and test of reintegration mechanisms for node replicas in the FT4FTT Architecture

Julian Proenza, Alberto Ballesteros, Sinisa Derasevic, 2016, 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA).

Towards the integration of flexible-time-triggered communication and replicated star topologies in CAN

Julian Proenza, Manuel Barranco, Guillermo Rodríguez-Navas, 2011, ETFA2011.

Towards a dynamic task allocation scheme for highly-reliable adaptive distributed embedded systems

Julian Proenza, Alberto Ballesteros, Pere Palmer, 2017, 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).

Injection of aggregated error flags as a means to guarantee consistent error detection in CAN

Julian Proenza, Guillermo Rodríguez-Navas, Christian Winter, 2011, ETFA2011.

Guest Editorial Special Section on Industrial Communication Systems

Julian Proenza, Stefano Vitturi, S. Vitturi, 2010 .

Hardware design of a high-precision and fault-tolerant clock subsystem for CAN networks

Julian Proenza, Guillermo Rodriguez-Navas, José-Juan Bosch, 2003 .

Orthogonal, Fault-Tolerant, and High-Precision Clock Synchronization for the Controller Area Network

Julian Proenza, Guillermo Rodríguez-Navas, Sebastià Roca, 2008, IEEE Transactions on Industrial Informatics.

Towards a reliability analysis of the design space for the communication subsystem of FT4FTT

Julian Proenza, Paulo Portugal, Manuel Barranco, 2014, Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA).

Using Timed Automata for Modeling Distributed Systems with Clocks: Challenges and Solutions

Julian Proenza, Guillermo Rodríguez-Navas, 2013, IEEE Transactions on Software Engineering.

Design and Verification of a Media Redundancy Management Driver for a CAN Star Topology

Julian Proenza, Manuel Barranco, David Gessner, 2013, IEEE Transactions on Industrial Informatics.

A first design for CANsistant: A mechanism to prevent inconsistent omissions in CAN in the presence of multiple errors

Julian Proenza, Ernesto Sigg, 2009, 2009 IEEE Conference on Emerging Technologies & Factory Automation.

Improving maintenance of FT4FTT: Extending it to monitor and log its available redundancy via internet

Julian Proenza, Alberto Ballesteros, Manuel Barranco, 2016, 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA).

An Architecture for Highly Reliable Fault-Tolerant Adaptive Distributed Embedded Systems

Julian Proenza, Sinisa Derasevic, Manuel Barranco, 2020, Computer.

Clock Synchronization in Integrated TSN-EtherCAT Networks

Julian Proenza, Alessandro V. Papadopoulos, Daniel Hallmans, 2020, 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).

MajorCAN: A Modification to the Controller Area Network Protocol to Achieve Atomic Broadcast

José Miró-Julià, Julian Proenza, 2000, ICDCS Workshop on Group Communications and Computations.

Towards analyzing the fault-tolerant operation of server-CAN

Julian Proenza, Hans A. Hansson, Sasikumar Punnekkat, 2005, 2005 IEEE Conference on Emerging Technologies and Factory Automation.

A model for quantifying the reliability of highly-reliable distributed systems based on fieldbus replicated buses

Julian Proenza, Manuel Barranco, Francisco Pozo, 2014, Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA).

Managing redundancy in CAN-based networks supporting N-Version Programming

José Miró-Julià, Julian Proenza, Hans A. Hansson, 2009, Comput. Stand. Interfaces.

Boosting the Robustness of Controller Area Networks: CANcentrate and ReCANcentrate

Julian Proenza, Luís Almeida, Manuel Barranco, 2009, Computer.

Designing fault-diagnosis and reintegration to prevent node redundancy attrition in highly reliable control systems based on FTT-Ethernet

Julian Proenza, Sinisa Derasevic, Manuel Barranco, 2016, 2016 IEEE World Conference on Factory Communication Systems (WFCS).

Towards Efficient Probabilistic Scheduling Guarantees for Real-Time Systems Subject to Random Errors and Random Bursts of Errors

Julian Proenza, Michael Short, M. Short, 2013, 2013 25th Euromicro Conference on Real-Time Systems.

Demonstrating the feasibility of media management in ReCANcentrate

Julian Proenza, Luís Almeida, Manuel Barranco, 2009, 2009 IEEE Conference on Emerging Technologies & Factory Automation.

First prototype and experimental assessment of media management in ReCANcentrate

Julian Proenza, Luís Almeida, Manuel Barranco, 2010, 2010 IEEE 15th Conference on Emerging Technologies & Factory Automation (ETFA 2010).

11th WFCS 2015 on a Mediterranean Island [Society News]

Julian Proenza, Thilo Sauter, 2015 .

Towards an experimental assessment of the slave elementary cycle synchronization in the Flexible Time-Triggered Replicated Star for Ethernet

Julian Proenza, Alberto Ballesteros, Manuel Barranco, 2014, Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA).

An active star topology for improving fault confinement in CAN networks

Julian Proenza, Guillermo Rodríguez-Navas, Luís Almeida, 2006, IEEE Transactions on Industrial Informatics.

Using FTT and stars to simplify node replication in CAN-based systems

Julian Proenza, Luís Almeida, Manuel Barranco, 2012, Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012).

Modeling and Verification of Master/Slave Clock Synchronization Using Hybrid Automata and Model-Checking

Julian Proenza, Hans A. Hansson, Guillermo Rodríguez-Navas, 2007, ICFEM.

Towards dynamic fault tolerance on FTT-based distributed embedded systems

Julian Proenza, Sinisa Derasevic, David Gessner, 2013, 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA).

Clock synchronization in CAN distributed embedded systems

Julian Proenza, Guillermo Rodriguez-Navas, 2004 .

Probabilistic scheduling guarantees in distributed real-time systems under error bursts

Julian Proenza, Sasikumar Punnekkat, Radu Dobrin, 2012, Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012).

A proposal for flexible, real-time and consistent multicast in FTT/HaRTES Switched Ethernet

Julian Proenza, Guillermo Rodríguez-Navas, G. Rodríguez-Navas, 2013, 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA).

A proposal for managing the redundancy provided by the flexible time-triggered replicated star for ethernet

Julian Proenza, Manuel Barranco, David Gessner, 2014, 2014 10th IEEE Workshop on Factory Communication Systems (WFCS 2014).

Developing TOBE-CAN: Total order broadcast enforcement in CAN

Julian Proenza, Manuel Barranco, 2012, Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012).

First quantitative results of the dependability improvement achieved by ReCANcentrate

Julian Proenza, Luís Almeida, Manuel Barranco, 2009, 2009 IEEE Conference on Emerging Technologies & Factory Automation.

Towards a time redundancy mechanism for critical frames in time-sensitive networking

Julian Proenza, Mladen Knezic, Manuel Barranco, 2017, 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).

Dependable Automotive CAN Networks

Julian Proenza, Guillermo Rodriguez-Navas, Juan R. Pimentel, 2009 .

Appropriate consistent replicated voting for increased reliability in a node replication scheme over FTT

Julian Proenza, Sinisa Derasevic, Manuel Barranco, 2014, Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA).

A technique to analyze the tolerance to transient overloads of a fault-tolerant real-time system

Guillem Bernat, Julian Proenza, Jose Miro-Julia, 1997, Proceedings 1997 High-Assurance Engineering Workshop.

Achieving elementary cycle synchronization between masters in the flexible time-triggered replicated star for ethernet

Julian Proenza, Alberto Ballesteros, Guillermo Rodríguez-Navas, 2014, Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA).

Towards a Flexible Time-Triggered replicated star for ethernet

Julian Proenza, Luís Almeida, Manuel Barranco, 2013, 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA).

A proposal for master replica control in the flexible time-triggered replicated star for ethernet

Julian Proenza, Manuel Barranco, David Gessner, 2014, 2014 10th IEEE Workshop on Factory Communication Systems (WFCS 2014).

Towards extending the OMNeT++ INET framework for simulating fault injection in ethernet-based Flexible Time-Triggered systems

Julian Proenza, Mladen Knezic, Alberto Ballesteros, 2014, Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA).

CSRP: an Enhanced Protocol for Consistent Reservation of Resources in AVB/TSN

Julian Proenza, Ines Alvarez, Daniel BujosaMateu, 2020 .

First experimental evaluation of the consistent replicated voting in the hard real-time ethernet switching architecture

Julian Proenza, Alberto Ballesteros, Sinisa Derasevic, 2015, 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).

Experimental evaluation of network component crashes and trigger message omissions in the Flexible Time-Triggered Replicated Star for Ethernet

Julian Proenza, Alberto Ballesteros, David Gessner, 2015, 2015 IEEE World Conference on Factory Communication Systems (WFCS).

An OMNET++ model to asses node fault-tolerance mechanisms for FTT-Ethernet DESs

Julian Proenza, Sinisa Derasevic, Manuel Barranco, 2015, 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).

First exploration of the potential of diverse training and voting for increasing the accuracy of CNNs

Yolanda González Cid, Julian Proenza, Patricia Arguimbau, 2019, 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).

Network communications protocol can star topology.

Julian Proenza, Guillermo Rodriguez-Navas, Manuel Barranco, 2004 .

A first performance analysis of the Admission Control in the HaRTES Ethernet switch

Julian Proenza, Mladen Knezic, Luís Almeida, 2016, 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA).

A cost-effective hardware architecture for fail-safe autonomous underwater vehicles

Gabriel Oliver, Julian Proenza, Alberto Ortiz, 1999, ICECS'99. Proceedings of ICECS '99. 6th IEEE International Conference on Electronics, Circuits and Systems (Cat. No.99EX357).

A first qualitative evaluation of star replication schemes for FTT-CAN

Julian Proenza, Michael Short, Manuel Barranco, 2012, Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012).

A CAN hub with improved error detection and isolation

Julian Proenza, Guillermo Rodriguez-Navas, Luis Almeida, 2005 .

The design of the CANbids architecture

Julian Proenza, Luís Almeida, Manuel Barranco, 2012, Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012).

Towards a Fault-Tolerant Architecture Based on Time Sensitive Networking

Julian Proenza, Manuel Barranco, Ines Alvarez, 2018, 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA).

Towards a layered architecture for the Flexible Time-Triggered Replicated Star for Ethernet

Julian Proenza, David Gessner, Ignasi Furió, 2015, 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).

An architecture for physical injection of complex fault scenarios in CAN networks

Julian Proenza, Jesús Jiménez, Guillermo Rodríguez-Navas, 2003, EFTA 2003. 2003 IEEE Conference on Emerging Technologies and Factory Automation. Proceedings (Cat. No.03TH8696).

Towards preventing error propagation in a real-time Ethernet switch

Julian Proenza, Paulo Pedreiras, Alberto Ballesteros, 2013, 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA).

Combining operational flexibility and dependability in FTT-CAN

Julian Proenza, José Alberto Fonseca, Paulo Pedreiras, 2006, IEEE Transactions on Industrial Informatics.

sfiCAN: A Star-Based Physical Fault-Injection Infrastructure for CAN Networks

Julian Proenza, Alberto Ballesteros, Manuel Barranco, 2014, IEEE Transactions on Vehicular Technology.

Improving the safety of AUVs

Julian Proenza, Alberto Ortiz, G. Bernat, 1999, Oceans '99. MTS/IEEE. Riding the Crest into the 21st Century. Conference and Exhibition. Conference Proceedings (IEEE Cat. No.99CH37008).

Analytical Assessment of the Precision Degradation Caused by Faults in a Fault-Tolerant Master/Slave Clock Synchronization Service for CAN

Julian Proenza, Guillermo Rodríguez-Navas, G. Rodríguez-Navas, 2008, 2008 Symposium on Reliable Distributed Systems.

Redundancy Management in a Low-Cost Distributed Hardware and Firmware Support for Software-Fault Tolerance

Julian Proenza, Hans Hansson, José Miro-Julia, 2007 .

Formal Verification of the FTTRS Mechanisms for the Consistent Update of the Traffic Schedule

Julian Proenza, Manuel Barranco, Daniel Bujosa, 2019, 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).

Mixing Time and Spatial Redundancy Over Time Sensitive Networking

Julian Proenza, Manuel Barranco, Ines Alvarez, 2018, 2018 48th Annual IEEE/IFIP International Conference on Dependable Systems and Networks Workshops (DSN-W).

Towards understanding the sensitivity of the reliability achievable by simplex and replicated star topologies in CAN

Julian Proenza, Manuel Barranco, 2011, ETFA2011.

Using FTT-ethernet for the coordinated dispatching of tasks and messages for node replication

Julian Proenza, Sinisa Derasevic, Manuel Barranco, 2014, Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA).

Experimental Assessment of ReCANcentrate, a Replicated Star Topology for CAN

Julian Proenza, Luis Almeida, Manuel Barranco, 2006 .

Using Timed Automata for Modeling the Clocks of Distributed Embedded Systems

Julian Proenza, Paul Pettersson, Guillermo Rodriguez-Navas, 2010 .

Quantitative characterization of the reliability of simplex buses and stars to compare their benefits in fieldbuses

Julian Proenza, Luís Almeida, Manuel Barranco, 2015, Reliab. Eng. Syst. Saf..

Correction to "Comparing Admission Control Architectures for Real-Time Ethernet"

Julian Proenza, Luís Almeida, Paulo Pedreiras, 2020, IEEE Access.

Reconfiguration Strategies for Critical Adaptive Distributed Embedded Systems

Julian Proenza, Luís Almeida, Alberto Ballesteros, 2018, 2018 48th Annual IEEE/IFIP International Conference on Dependable Systems and Networks Workshops (DSN-W).

Designing and verifying media management in ReCANcentrate

Julian Proenza, Luís Almeida, Manuel Barranco, 2008, 2008 IEEE International Conference on Emerging Technologies and Factory Automation.

A first qualitative comparison of the admission control in FTT-SE, HaRTES and AVB

Julian Proenza, Luís Almeida, Ines Alvarez, 2016, 2016 IEEE World Conference on Factory Communication Systems (WFCS).

Designing sfiCAN: A star-based physical fault injector for CAN

Julian Proenza, Alberto Ballesteros, Manuel Barranco, 2011, ETFA2011.

Analyzing atomic broadcast in TTCAN networks

Julian Proenza, Guillermo Rodriguez-Navas, 2003 .

COTS-based hardware support to timeliness in CAN networks

Julian Proenza, Guillermo Rodríguez-Navas, Ian Broster, 2003, EFTA 2003. 2003 IEEE Conference on Emerging Technologies and Factory Automation. Proceedings (Cat. No.03TH8696).

Quantitative Comparison of the Error-Containment Capabilities of a Bus and a Star Topology in CAN Networks

Julian Proenza, Luís Almeida, Manuel Barranco, 2011, IEEE Transactions on Industrial Electronics.

Reliability improvement achievable in CAN-based systems by means of the ReCANcentrate replicated star topology

Julian Proenza, Luis Almeida, Manuel Barranco, 2010, 2010 IEEE International Workshop on Factory Communication Systems Proceedings.

First implementation and test of a node replication scheme on top of the flexible time-triggered replicated star for ethernet

Julian Proenza, Alberto Ballesteros, Sinisa Derasevic, 2016, 2016 IEEE World Conference on Factory Communication Systems (WFCS).

LETRA: Mapping Legacy Ethernet-Based Traffic into TSN Traffic Classes

Thomas Nolte, Julian Proenza, Mohammad Ashjaei, 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ).

Developments in Flexible Time-Triggered Switched Ethernet

Thomas Nolte, Julian Proenza, Luis Silva, 2013 .