C. Lin

发表

Selective growth of ZnO nanorods for gas sensors using ink-jet printing and hydrothermal processes

Chi-Jung Chang, Shao-Tsu Hung, C. Lin, 2010 .

Elastic Response of Thermal Spray Deposits under Indentation Tests

C. Berndt, C. Lin, S. Leigh, 2005 .

EXAFS studies of amorphous Fe50Ta50 powders during mechanical alloying

C. Lin, Y. Hwu, Peter C. Y. Lee, 1998 .

Deposition of AlGaN films on (111) Si substrates and optimization of GaN growth on Si using intermediate-temperature AlGaN buffer layers

C. Lin, Tai-Yuan Lin, W. Liao, 2005 .

A modified plasma arc gas condensation technique to synthesize nanocrystalline tungsten oxide powders

C. Lin, C. Su, Chia Wei Cheng, 2005 .

One-step Synthesis and Characterization of Nanosized Bioactive Glass

S. Shih, Yu-Jen Chou, C. Lin, 2014 .

Electromagnetic characteristics of manganese oxide-coated Fe3O4 nanoparticles at 2-18 GHz

C. Lin, R. B. Yang, W. Liang, 2011 .

The properties of transparent semiconductor Zn1-xTixO thin films prepared by the sol-gel method

C. Lin, Chin-Yi Chen, Kan Yang, 2009 .

Fabrication of Mg–Y–Cu bulk metallic glass by mechanical alloying and hot consolidation

J. C. Huang, W. C. Liu, C. Lin, 2007 .

Thermoelectric Properties of Alumina-Doped Bi0.4Sb1.6Te3 Nanocomposites Prepared through Mechanical Alloying and Vacuum Hot Pressing

C. Lin, Pee-Yew Lee, R. Huang, 2015 .

Characterization of electrochromic tungsten oxide film from electrochemical anodized RF-sputtered tungsten films

Sheng-Chang Wang, Jow-Lay Huang, C. Lin, 2013 .

Synthesis and characterization of electrochromic plate-like tungsten oxide films by acidic treatment of electrochemical anodized tungsten

Sheng-Chang Wang, Jow-Lay Huang, C. Lin, 2013 .

Uncapped Au–Pd colloidal nanoparticles show catalytic enhancement

G. Margaritondo, C. Lin, Y. Hwu, 2015 .

Structural evolution and chemical bonds in electrochromic WO3 films during electrochemical cycles

Sheng-Chang Wang, Jow-Lay Huang, C. Lin, 2012 .

High-yield fabrication of W18O49@TiO2 core–shell nanoparticles: microstructures and optical-thermal properties

C. Lin, C. Su, Hsuan-Ching Lin, 2011 .

Bias effects on microstructure, mechanical properties and corrosion resistance of arc-evaporated CrTiAlN nanocomposite films on AISI 304 stainless steel

C. Lin, Chun-Ying Lee, W. Ho, 2011 .

Bias effects on the tribological behavior of cathodic arc evaporated CrTiAlN coatings on AISI 304 stainless steel

C. Lin, C. Su, Cheng-Hsun Hsu, 2010 .

Large-area TiO2 nanotube dye-sensitized solar cells using thermal-sprayed Ti layers on stainless steel

W. Jheng, C. Lin, C. Chen, 2014 .

Hierarchical ZnO nanorod-array films with enhanced photocatalytic performance

Chi-Jung Chang, C. Lin, Chien-Yie Tsay, 2013 .

Formation of tungsten oxide encapsulated in titanium oxide nanocages by modified plasma arc gas condensation

C. Lin, C. Su, Hsuan-Ching Lin, 2007 .

Electrochromic properties of nanostructured tungsten oxide films prepared by surfactant-assisted sol-gel process

Sheng-Chang Wang, Jow-Lay Huang, C. Lin, 2013 .

Electrochromic performance of hybrid tungsten oxide films with multiwalled-CNT additions

C. Lin, Chin-Yi Chen, C. Chen, 2011 .

Oxygen partial pressure effect on the preparation of nanocrystalline tungsten oxide powders by a plasma arc gas condensation technique

C. Pan, C. Lin, C. Su, 2008 .

Annealing induced structural evolution and electrochromic properties of nanostructured tungsten oxide films

Sheng-Chang Wang, Jow-Lay Huang, C. Lin, 2013 .

Formation of NiAl–Al2O3 intermetallic-matrix composite powders by mechanical alloying technique

C. Lin, Pee-Yew Lee, Shi Hong, 2000 .

Impact of Zr-Doped Bi2O3 Radiopacifier by Spray Pyrolysis on Mineral Trioxide Aggregate

Min-Hua Chen, C. Lin, Chin-Yi Chen, 2021, Materials.

A facile route to tungsten oxide nanomaterials with controlled morphology and structure

K. Ou, C. Lin, C. Su, 2011 .

Photocatalyst ZnO-doped Bi2O3 powder prepared by spray pyrolysis

Kun-Huang Chen, Jing-Heng Chen, Chi-Jung Chang, 2015 .

Cosmetic properties of TiO2/mica-BN composite powder prepared by spray drying

C. Lin, C. Su, H. Tang, 2014 .

Photocatalytic activity of TiO2 nanoparticle fluid prepared by combined ASNSS

Ho Chang, C. Lin, Hong‐Ming Lin, 2004 .

Hybrid manganese oxide films for supercapacitor application prepared by sol-gel technique

C. Lin, Chin-Yi Chen, W. Tsai, 2009 .

Pseudocapacitive properties of carbon nanotube/manganese oxide electrode deposited by electrophoretic deposition

Y. C. Chan, C. Lin, Chin-Yi Chen, 2009 .

Characterization of spray pyrolyzed manganese oxide powders deposited by electrophoretic deposition technique

C. Lin, Chin-Yi Chen, Hong‐Ming Lin, 2007 .

Pseudocapacitive Manganese Oxide Prepared by a Spray Pyrolysis/Electrostatic Deposition Technique

W. Tuan, C. Lin, Chin-Yi Chen, 2006 .

CNTs stabilize high temperature anatase phase of TiO/sub 2/

C. Lin, Hong‐Ming Lin, Tsung-Yeh Yang, 2005, 5th IEEE Conference on Nanotechnology, 2005..

Fabrication and optical properties of Ti-doped W18O49 nanorods using a modified plasma-arc gas-condensation techniquea)

C. Lin, C. Su, Hsuan-Ching Lin, 2009 .

Preparation and characterization of silver nanocrystals decorated mesoporous bioactive glass via synchrotron X-ray reduction

S. Shih, C. Lin, Chin-Yi Chen, 2016 .

A novel method of supporting gold nanoparticles on MWCNTs: Synchrotron X-ray reduction

She-huang Wu, C. Lin, Y. Hwu, 2007 .

A Novel Sol-Gel Bi2-xHfxO3+x/2 Radiopacifier for Mineral Trioxide Aggregates (MTA) as Dental Filling Materials

J. Yang, C. Lin, Chin-Yi Chen, 2021, Applied Sciences.

Influence of the trench depths of grooved GaN templates on the characteristics of overgrown AlGaN films

C. Lin, Tai-Yuan Lin, W. Liao, 2006 .

Manganese oxide thin films prepared by potentiodynamic electrodeposition and their supercapacitor performance

Jeng‐Kuei Chang, C. Lin, W. Tsai, 2010 .

Template assisted fabrication of TiO2 and WO3 nanotubes

C. Lin, C. Chen, C. Cheng, 2013 .

Mesoporous Properties of Bioactive Glass Synthesized by Spray Pyrolysis with Various Polyethylene Glycol and Acid Additions

D. Lin, C. Lin, Chin-Yi Chen, 2021, Polymers.

Pseudocapacitive performance of hybrid manganese oxide films with multiwalled-CNT additions

C. Lin, Szu-Chi Wang, Chueh-Cheng Wu, 2010 .

Electrophoretically deposited manganese oxide coatings for supercapacitor application

Chia Yen Lin, C. Lin, Chin-Yi Chen, 2009 .

Characterization of nanocrystalline manganese oxide powder prepared by inert gas condensation

Ming-Hsiu Michelle Tsai, C. Lin, Chin-Yi Chen, 2008 .

Manganese oxide films prepared by sol-gel process for supercapacitor application

Chia Yen Lin, C. Lin, Chin-Yi Chen, 2007 .

Effects of the methyl methacrylate addition, polymerization temperature and time on the MBG@PMMA core-shell structure and its application as addition in electrospun composite fiber bioscaffold

C. Lin, Chin-Yi Chen, Yu-Ruei Kung, 2022, Ceramics International.

Supercapacitive properties of spray pyrolyzed iron-added manganese oxide powders deposited by electrophoretic deposition technique

C. Lin, Chin-Yi Chen, Pee-Yew Lee, 2008 .

A study of nanoparticle manufacturing process using vacuum submerged arc machining with aid of enhanced ultrasonic vibration

Ho Chang, C. Lin, Hong‐Ming Lin, 2005 .

Hydrogen Absorption Performance of Mechanically Alloyed (Mg2Ni)100−xTix Powder

C. Lin, Chin-Yi Chen, Pee-Yew Lee, 2007 .

Improvement of hydrogen absorption performances of mechanically alloyed Mg2Ni powders by water cooling

C. Lin, Chin-Yi Chen, Shian-Ke Lin, 2007 .

Analysis on microstructure and characteristics of TiAlN/CrN nano-multilayer films deposited by cathodic arc deposition

S. H. Liu, Chung Kwei Lin, C. Lin, 2010 .

Magnetic and structural properties of nanophase AgxFe1-x solid solution particles

Y. Yao, C. Lin, Y. Hwu, 1998 .

Low temperature sintering and magnetic properties of garnet microwave magnetic materials

I. Lin, C. Lin, Hua‐Chi Cheng, 2007 .

Growth factors-loaded calcium phosphate/polymer hybrid coating with sequential release behavior prepared via electrochemical deposition method

C. Lin, San-Yuan Chen, Tse-Ying Liu, 2016 .

Radiopacity performances of precipitated ZrO2-doped Bi2O3 powders and the influences of dopant concentrations and sintering temperatures

J. Yang, C. Lin, Chin-Yi Chen, 2017 .

Radiopacity and cytotoxicity of Portland cement containing zirconia doped bismuth oxide radiopacifiers.

Chiehfeng Chen, J. Yang, S. Lee, 2014, Journal of endodontics.

Frequency-dependent complex permittivity and permeability of iron-based powders in 2–18 GHz

C. Lin, R. Yang, S. D. Hsu, 2009 .

Spherical Composite Powder by Coupling Polymethyl Methacrylate and Boron Nitride via Spray Drying for Cosmetic Application

Jia-Chang Wang, C. Lin, C. Su, 2019, Materials.

A study on the corrosion and erosion behavior of electroless nickel and TiAlN/ZrN duplex coatings on ductile iron

K. Ou, C. Lin, Sheng-Long Lee, 2015 .

Effect of precursor characteristics on zirconia and ceria particle morphology in spray pyrolysis

S. Tsai, C. Lin, T. Tseng, 2008 .

Formation of Irregular Nanocrystalline CeO2 Particles from Acetate-Based Precursor via Spray Pyrolysis

C. Lin, Chin-Yi Chen, T. Tseng, 2008 .

Acoustic emission responses of plasma-sprayed alumina-3% titania deposits

C. Berndt, C. Lin, S. Leigh, 1997 .

Enhanced Diffusion Bonding Between High Purity Aluminum and 6061 Aluminum by Electrolytic Polishing Assistance

C. Lin, C. Chen, Fang-Yu Fan, 2016 .

Investigation of cracking mechanisms of plasma sprayed alumina-13% titania by acoustic emission

C. Berndt, H. Herman, K. Murakami, 1995 .

UV enhancement of the gas sensing properties of nano-TiO2

Hong-Ming Lin, Chung Kwei Lin, C. Lin, 2003 .

Sintering Temperature-Dependence on Radiopacity of Bi(2−x) ZrxO(3+x/2) Powders Prepared by Sol-Gel Process

J. Yang, C. Lin, Chin-Yi Chen, 2018, Materials.

Stoichiometric Study of Iron Sulfide Prepared by Mechanochemical Reaction

C. Lin, Chin-Yi Chen, Pee-Yew Lee, 2007 .

Structural investigation of iron sulfides synthesized by mechanochemical reaction

C. Lin, G. S. Chen, Hong‐Ming Lin, 2004 .

Fabrication and corrosion behavior of Ti-based bulk metallic glass composites containing carbon nanotubes

C. Lin, Hong‐Ming Lin, W. Kai, 2010 .

Amorphization of transition metal‐Si alloy powders by mechanical alloying

C. Lin, Hong‐Ming Lin, P. Lee, 1993 .

Improvement on hardness and corrosion resistance of ferritic stainless steel via PVD-(Ti,Cr)N coatings

K. Ou, C. Lin, K. Huang, 2013 .

Mg–Y–Cu bulk metallic glass prepared by mechanical alloying and vacuum hot-pressing

C. Lin, Pee-Yew Lee, J. Huang, 2006 .

Preparation and thermal stability of mechanically alloyed amorphous Ni-Zr-Ti-Si composites

C. Lin, Pee-Yew Lee, R. Jeng, 2004 .

Characterization of Ni57Zr20Ti18Al5 amorphous powder obtained by mechanical alloying

C. C. Wang, C. Lin, Pee-Yew Lee, 2004 .

Consolidation of amorphous Ni–Zr–Ti–Si powders by vacuum hot-pressing method

C. Lin, Pee-Yew Lee, C. K. Lin, 2002 .

Mechanical alloyed Ti–Cu–Ni–Si–B amorphous alloys with significant supercooled liquid region

C. Lin, Pee-Yew Lee, C. Yeh, 2002 .

The Design of ZnO Nanorod Arrays Coated with MnOx for High Electrochemical Stability of a Pseudocapacitor Electrode

S. Anandan, C. Lin, Chin-Yi Chen, 2020, Nanomaterials.

Pseudocapacitive performance of manganese oxide coated hierarchical cobalt oxide structure prepared by hydrothermal process

S. Shih, Chi-Jung Chang, C. Lin, 2017 .

Effects of adding different morphological carbon nanomaterials on supercapacitive performance of sol-gel manganese oxide films

C. Lin, Alex Fang, C. Wu, 2016 .

Influence of Fe3O4 nanoparticles on pseudocapacitive behavior of the charge storage process

C. Lin, Chin-Yi Chen, Chien-Yie Tsay, 2015 .

Improved pseudo-capacitive performance of manganese oxide films synthesized by the facile sol–gel method with iron acetate addition

C. Lin, C. Chen, Chia-Yu Yang, 2013 .

High supercapacitive stability of spray pyrolyzed ZnO-added manganese oxide coatings

S. Shih, Chi-Jung Chang, C. Lin, 2013 .

High supercapacitive performance of sol–gel ZnO-doped manganese oxide coatings

S. Shih, C. Lin, Chin-Yi Chen, 2013 .

Effect of iron particle addition on the pseudocapacitive performance of sol-gel derived manganese oxides film

W. Jheng, C. Lin, Chien-Yie Tsay, 2012 .

In situ X-ray absorption spectroscopic studies of anodically deposited binary Mn-Fe mixed oxides with relevance to pseudocapacitance

Jeng‐Kuei Chang, C. Lin, W. Tsai, 2008 .

Acoustic Emission Responses of Plasma Sprayed Ceramics During Four Point Bend Tests

C. Berndt, H. Herman, S. Sampath, 2008 .

Investigation of the microstructure and characterizations of TiN/CrN nanomultilayer deposited by unbalanced magnetron sputter process

P. Chen, C. Pan, C. Lin, 2008 .

Discoloration Improvement by Mechanically-Milled Binary Oxides as Radiopacifier for Mineral Trioxide Aggregates

C. Lin, Chin-Yi Chen, Alex Fang, 2022, Materials.

Effects of Milling Time, Zirconia Addition, and Storage Environment on the Radiopacity Performance of Mechanically Milled Bi2O3/ZrO2 Composite Powders

C. Lin, Chin-Yi Chen, Alex Fang, 2020, Materials.

Microwave absorbing properties of iron nanowire at x-band frequencies

C. Lin, Hong‐Ming Lin, Chien-Yie Tsay, 2011 .

Magnetoelectric behavior of carbonyl iron mixed Mn oxide-coated ferrite nanoparticles

Y. Yao, C. Lin, Chien-Yie Tsay, 2010 .

Investigation on electromagnetic and microwave absorbing properties of La0.7Sr0.3MnO3−δ/carbon nanotube composites

Y. Yao, C. Lin, Chien-Yie Tsay, 2010 .

Photocatalytic properties of nanocrystalline TiO2 thin film with Ag additions

C. Lin, Chin-Yi Chen, Chih-Chieh Chan, 2006 .

Preparation and thermal stability of mechanically alloyed Ni-Zr-Ti-Y amorphous powders

C. C. Wang, J. Chu, C. Lin, 2004 .

Process development of a novel arc spray nanoparticle synthesis system (ASNSS) for preparation of a TiO2 nanoparticle suspension

Ho Chang, C. Lin, Hong‐Ming Lin, 2004 .

Structure and optical properties of tungsten oxide nanomaterials prepared by a modified plasma arc gas condensation technique

C. Lin, C. Su, Hsuan-Ching Lin, 2010 .

The Effects of Size and Shape of Iron Particles on the Microwave Absorbing Properties of Composite Absorbers

C. Lin, W. Liang, Ruey-Bin Yang, 2013, IEEE Transactions on Magnetics.

Low operating temperature CO sensor prepared using SnO2 nanoparticles

S. Shih, Jing-Heng Chen, Chi-Jung Chang, 2018, Journal of Electroceramics.

Effect of Sn-doped on microstructural and optical properties of ZnO thin films deposited by sol-gel method

W. Tuan, C. Lin, Hua‐Chi Cheng, 2008 .

Gas sensors with porous three-dimensional framework using TiO2/polymer double-shell hollow microsphere

Chi-Jung Chang, C. Lin, Chin-Yi Chen, 2011 .

Preparation and characterization of nanocrystalline porous TiO2/WO3 composite thin films

C. Lin, Chien-Yie Tsay, Chih-Chieh Chan, 2006 .

Characterization of iron nitride powders formed by mechanical alloying and atmospheric heat treatment techniques

T. Chin, C. Lin, Pee-Yew Lee, 2001 .

Solid State Amorphization of Fe50Nb50 Powders during Mechanical Alloying

C. Lin, Y. Hwu, Giin-Shan Chen, 1999 .

Investigations of mechanically alloyed Ni–Zr–Ti–Si amorphous alloys with significant supercooled regions

C. Lin, Hong‐Ming Lin, Pee-Yew Lee, 2002 .

Formation and characterization of mechanically alloyed Ti–Cu–Ni–Sn bulk metallic glass composites

C. Lin, Pee-Yew Lee, I. Jeng, 2006 .

Microstructural and optical properties of Ga-doped ZnO semiconductor thin films prepared by sol–gel process

Chung Kwei Lin, C. Lin, Chien-Yie Tsay, 2010 .

Photocatalytic properties of porous TiO2/Ag thin films

C. Lin, J. Chen, Chih-Chieh Chan, 2008 .

Cu-Zr-Ti Bulk Metallic Glass Composites Produced by Mechanical Alloying and Vacuum Hot-Pressing

C. Lin, Pee-Yew Lee, R. Jen, 2005 .

Consolidation of Mechanically Alloyed Cu-Zr-Ti Metallic Glass Powders

C. Lin, Pee-Yew Lee, 2017 .

Transparent semiconductor zinc oxide thin films deposited on glass substrates by sol–gel process

Chi-Jung Chang, C. Lin, Chien-Yie Tsay, 2010 .

Formation of Cu-Zr-Ti Amorphous Alloys with Significant Supercooled Liquid Region by Mechanical Alloying

C. Lin, Giin-Shan Chen, R. Louh, 1999 .

Amorphization reaction of Ni-Ta powders during mechanical alloying

C. Lin, Hong‐Ming Lin, Pee-Yew Lee, 1997 .

Effect of electroless nickel interlayer on wear behavior of CrN/ZrN multilayer films on Cu-alloyed ductile iron

C. Lin, C. Hsu, S. C. Kung, 2013 .

Polymerization-like grafting of thermoplastic polyurethane by microwave plasma treatment

C. Lin, C. Su, Chii-Ruey Lin, 2006 .

Electrochemistry and Rapid Electrochromism Control of MoO3/V2O5 Hybrid Nanobilayers

Prem Chandan, C. Lin, P. Chi, 2019, Materials.

Mechanical behavior of TiN/CrN nano-multilayer thin film deposited by unbalanced magnetron sputter process

C. Lin, C. Su, P. Sun, 2011 .

Functionalized polymer spheres via one-step photoinduced synthesis for antimicrobial activity and gene delivery

C. Lin, Shu-Fen Peng, Y. Hwu, 2012, Nanotechnology.

Effect of Hydroxyapatite Formation on Titanium Surface with Bone Morphogenetic Protein-2 Loading through Electrochemical Deposition on MG-63 Cells

Yankuba B. Manga, C. Lin, Ching-Li Tseng, 2018, Materials.

Investigations on Microstructures and Gas Sensing Properties of W5O14 nanorods

C. Lin, C. Su, Yi-Chieh Chang, 2009 .

The optical properties and sunscreen application of spherical h-BN-TiO2/mica composite powder

C. Lin, C. Su, Geng Zhu, 2014 .

The failure mechanism of diamond like coatings prepared by the filtered cathodic arc technique for minting application

M. Leu, C. Lin, C. Su, 2006 .

Improvement in the characteristics of GaN-based light-emitting diodes by inserting AlGaN-GaN short-period superlattices in GaN underlayers

C. Lin, Tai-Yuan Lin, W. Liao, 2006 .

Additive manufacturing of dental prosthesis using pristine and recycled zirconia solvent-based slurry stereolithography

C. Lin, C. Su, Dongjie Chen, 2020 .

Effect of Tantalum Pentoxide Addition on the Radiopacity Performance of Bi2O3/Ta2O5 Composite Powders Prepared by Mechanical Milling

C. Lin, Chin-Yi Chen, Chia-Hsiang Yu, 2021, Materials.

Acoustic emission studies on thermal spray materials

C. Berndt, C. Lin, 1998 .

Non-catalytic and substrate-free method to titania-doped W18O49 nanorods: growth, characterizations, and electro-optical properties

C. Lin, C. Su, Hsuan-Ching Lin, 2012, Journal of Nanoparticle Research.

Bonding and Thermal Cycling Performances of Two (Poly)Aryl–Ether–Ketone (PAEKs) Materials to an Acrylic Denture Base Resin

D. Lin, L. Fuh, C. Lin, 2021, Polymers.

Preparation and characterization of nanocrystalline Nb3Al alloy

C. Lin, Hong‐Ming Lin, M. F. Tai, 2001 .

Characterization of bioactive glass‐coated carbon nanotubes prepared by solgel process

C. Lin, Chien-Yie Tsay, Tetsuya Suzuki, 2017 .

Hydrothermal Synthesis of Co3O4/ZnCo2O4 Core-Shell Nanostructures for High-Performance Supercapacitors

Yu-Cheng Chang, Chi-Jung Chang, C. Lin, 2021, Journal of The Electrochemical Society.

Hydrophilic/hydrophobic surface of Al 2 O 3 thin films grown by thermal and plasma-enhanced atomic layer deposition on plasticized polyvinyl chloride (PVC)

Kai-Chiang Yang, Li Wang, Miin-Jang Chen, 2016 .

Performance of sol-gel deposited Zn1 - xMgxO films used as active channel layer for thin-film transistors

C. Lin, Hua‐Chi Cheng, Chien-Yie Tsay, 2007 .

Complex permittivity and permeability of iron-based composite absorbers measured by cavity perturbation method in X-band frequency range

Y. Yao, C. Lin, Chien-Yie Tsay, 2009 .

Effects of deposition and annealing atmospheres on phase transition of tungsten oxide films grown by ultra-high-vacuum reactive sputtering

C. Lin, W. Su, W. Liao, 2005 .

Anode Catalyst of Hybrid AuPd and Rare Earth Doped Cerium Oxide/Multi-Walled Carbon Nanotubes for Direct Formic Acid Fuel Cells

L. Stobiński, C. Lin, Hong‐Ming Lin, 2016 .

The effect on the microstructures of electroless nickel coatings initiated by pulsating electric current

Tsong‐Jen Yang, C. Lin, Chine-Te Chen, 2007 .

A Study of Magnetic Field Effect on Nanofluid Stability of CuO

Chii-Ruey Lin, Ho Chang, C. Lin, 2004 .