S. Maity

发表

Classification and Determination of Human Emotional States using EEG

Sougata Bhattacharjee, A.I.Sid diki, Praveen Kumar Yadav, 2017 .

Excogitating Material Rankings Using Novel Aggregation Multiplicative Rule (AMR): A Case for Material Selection Problems

D. Zindani, S. Maity, S. Bhowmik, 2020 .

Cutting tool material selection using grey complex proportional assessment method

S. Chakraborty, Prasenjit Chatterjee, S. Maity, 2012 .

Characterization of Boron Carbide (B4C) particle reinforced aluminium metal matrix composites fabricated by powder metallurgy techniques – A review

K. Pandey, S. Maity, G. Manohar, 2021 .

Laser Beam Micromachining of Metals: A Review

K. Pandey, S. Maity, D. Raj, 2019, Materials Today: Proceedings.

Grinding Wheel Abrasive Material Selection Using Fuzzy TOPSIS Method

S. Chakraborty, S. Maity, 2013 .

A Novel Approach to Synthesize Reduced Graphene Oxide (RGO) at Low Thermal Conditions

S. Maity, A. Deoghare, Papari Das, 2020, Arabian Journal for Science and Engineering.

Tuning of Centroid with Modified Kernik Mendel (KM)Algorithm

J. Sil, S. Maity, 2012 .

Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2020 .

Green synthesis of gold nanoparticles using gum polysaccharide of Cochlospermum religiosum (katira gum) and study of catalytic activity

S. S. Islam, S. Maity, I. Sen, 2012 .

Punica Granatum Fibers as Potential Reinforcement of Composite Structures

D. Zindani, S. Maity, S. Bhowmik, 2020, Fibers and Polymers.

Microstructural and Mechanical Properties of Microwave Sintered AA7075/Graphite/SiC Hybrid Composite Fabricated by Powder Metallurgy Techniques

K. Pandey, S. Maity, G. Manohar, 2021, Silicon.

An immunostimulating water insoluble β-glucan of an edible hybrid mushroom: isolation and characterization.

S. S. Islam, S. Maity, T. K. Maiti, 2013, Fitoterapia.

Antioxidant and immunostimulant β-glucan from edible mushroom Russula albonigra (Krombh.) Fr.

S. S. Islam, K. Acharya, S. Maity, 2014, Carbohydrate polymers.

Structural study of an immunoenhancing polysaccharide isolated from an edible hybrid mushroom of Pleurotus florida and Lentinula edodes

S. S. Islam, S. Maity, T. K. Maiti, 2013 .

Image Segmentation Using Grey Scale Weighted Average Method and Type-2 Fuzzy Logic Systems

J. Sil, S. Maity, 2011 .

Biological antioxidants (Vitamin C and E) in relation to fish immunity

S. Maiti, S. Maity, Iqra Nazir, 2021, International Journal of Chemical Studies.

A partially methylated mannogalactan from hybrid mushroom pfle 1p: purification, structural characterization, and study of immunoactivation.

S. S. Islam, S. Maity, T. K. Maiti, 2014, Carbohydrate research.

Structural studies of an immunostimulating gluco-arabinan from seeds of Caesalpinia bonduc.

S. S. Islam, S. Maity, T. K. Maiti, 2013, Carbohydrate polymers.

A heteropolysaccharide from an edible hybrid mushroom pfle 1p: structural and immunostimulating studies.

S. S. Islam, S. Maity, T. K. Maiti, 2013, Carbohydrate research.

Chemical analysis of an immunostimulating (1→4)-, (1→6)-branched glucan from an edible mushroom, Calocybe indica.

S. S. Islam, S. Maity, T. K. Maiti, 2012, Carbohydrate research.

Structural characterization of an immunoenhancing cytotoxic heteroglycan isolated from an edible mushroom Calocybe indica var. APK2.

S. S. Islam, S. Maity, T. K. Maiti, 2011, Carbohydrate research.

Structural characterization and study of immunoenhancing and antioxidant property of a novel polysaccharide isolated from the aqueous extract of a somatic hybrid mushroom of Pleurotus florida and Calocybe indica variety APK2.

S. S. Islam, S. Maity, T. K. Maiti, 2011, International journal of biological macromolecules.

Chemical analysis and study of immunoenhancing and antioxidant property of a glucan isolated from an alkaline extract of a somatic hybrid mushroom of Pleurotus florida and Calocybe indica variety APK2.

S. S. Islam, S. Maity, T. K. Maiti, 2011, International journal of biological macromolecules.

Wear assessment of Cr 2 O 3 /TiAlN coated DAC‐10 tool steel against steel and Al 2 O 3 counterbodies

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, International Journal of Applied Ceramic Technology.

ANN-Based Random First-Ply Failure Analyses of Laminated Composite Plates

S. Dey, T. Mukhopadhyay, S. Maity, 2020 .

Comparative study on the structural make-up and mechanical behavior of silicon and silver doped amorphous carbon films

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Silicon.

Friction and tribological behavior of bare nitrided, TiAlN and AlCrN coated MDC-K hot work tool steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2020 .

Wear Parameter Optimization of Ceramic Coating Using the Fuzzy Integrated PSI-CODAS Decision-Making Framework

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Arabian Journal for Science and Engineering.

Modeling of wear parameters and multi-criteria optimization by Box-Behnken design of AlCrN thin film against gamma-irradiated Ti6Al4V counterbody

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Ceramics International.

Effect of annealing on structural, mechanical and tribological properties of Cr-(CrN/TiAlN) coating

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Advances in Materials and Processing Technologies.

Evaluation of Gamma irradiated Ti6Al4V and Silver alloyed a-C coatings as friction pair via Response Surface Methodology

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Advances in Materials and Processing Technologies.

Relative effect of wear parameters on the wear behavior of TiAlN coated tool steel and parametric optimization using MCDM method

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Advances in Materials and Processing Technologies.

Decision making tools for optimal material selection: A review

D. Zindani, S. Maity, S. Bhowmik, 2020, Journal of Central South University.

Comparative study on the structural make-up and mechanical behavior of silicon and silver doped amorphous carbon films

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Silicon.

Investigation on metallurgical, tribological, hardness properties of spray deposited and warm rolled Al-18Pb, Al-22Pb alloys

K. Pandey, S. Maity, B. V. Ramana Reddy, 2019, Journal of Materials Research and Technology.

Microstructure, Tribological Properties, and Hardness of Spray-Deposited and Warm-Rolled Al–Pb Alloys in Peripheral Regions

K. Pandey, S. Maity, Bandi Venkata Ramana Reddy, 2020, Powder Metallurgy and Metal Ceramics.

EFFECT OF WARM ROLLING ON MICROSTRUCTURE, POROSITY, AND HARDNESS OF A SPRAY-FORMED LM25 ALUMINUM ALLOY

K. Pandey, S. Maity, Bandi Venkata Ramana Reddy, 2019 .

Wear parameter optimization for CrN/TiAlSiN coating using novel BWM integrated TODIM decision-making approach

Sunil Kumar, S. Maity, V. Venkatesh, 2022, International Journal on Interactive Design and Manufacturing (IJIDeM).

Computational Wear Analysis of Acetabular Cup for Various Daily Activities with Different Biomaterials

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2020 .

State-of-the-art review on laser cladding process as an in-situ repair technique

S. Maity, D. Raj, B. Das, 2021, Proceedings of the Institution of mechanical engineers. Part E, journal of process mechanical engineering.

Effect of tribological process parameters on the wear and frictional behaviour of Cr-(CrN/TiN) composite coating: An experimental and analytical study

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Ceramics International.

Effect of spark plasma sintering on microstructure and mechanical properties of AA7075/B4C/ZrC hybrid nanocomposite fabricated by powder metallurgy techniques

K. Pandey, S. Maity, G. Manohar, 2022, Materials Chemistry and Physics.

Microstructural and Mechanical Properties of Microwave Sintered AA7075/Graphite/SiC Hybrid Composite Fabricated by Powder Metallurgy Techniques

K. Pandey, S. Maity, G. Manohar, 2021, Silicon.

Effect of Processing Parameters on Mechanical Properties of Al7175/Boron Carbide (B4C) Composite Fabricated by Powder Metallurgy Techniques

K. Pandey, S. Maity, G. Manohar, 2021 .

Effect of sintering mechanisms on mechanical properties of AA7075/B4C composite fabricated by powder metallurgy techniques

S. Maity, G. Manohar, K. Pandey, 2021 .

Effect of china clay on mechanical properties of AA7075/B4C hybrid composite fabricated by powder metallurgy techniques

K. Pandey, S. Maity, G. Manohar, 2020, Materials Today: Proceedings.

Effect of Sintering Temperatures on Mechanical Properties of AA7075/B4C/Graphite Hybrid Composite Fabricated by Powder Metallurgy Techniques

K. Pandey, S. Maity, G. Manohar, 2021 .

Fuzzy CODAS Based Analysis of Wear and Temperature Induced Responses of Si Doped a-C film and CFRPEEK Tribopair

Sunil Kumar, S. Maity, M. Łępicka, 2022, Silicon.

Effect of lubricated sliding wear against CFRPEEK on the nanomechanical properties of Ag alloyed Cr/DLC thin film.

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Journal of the mechanical behavior of biomedical materials.

Mechanical and tribological assessment of composite AlCrN or a-C:Ag-based thin films for implant application

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2020 .

Preheating Path Selection Through Numerical Analysis of Laser-Aided Direct Metal Deposition

S. Maity, D. Raj, B. Das, 2021 .

Enhancement of microstructure and mechanical performance of spray formed Al-6Si-18Pb alloy by warm rolling

K. Pandey, Sunil Kumar, S. Maity, 2022 .

Characterization of spray formed Al-alloys — A Review

K. Pandey, S. Maity, Bandi Venkata Ramana Reddy, 2019, REVIEWS ON ADVANCED MATERIALS SCIENCE.

Effect Of Cold Rolling On Microstructural Properties Of Spray Deposited Al-%18Pb And Al-%22Pb Alloys

K. Pandey, S. Maity, B. Reddy, 2019, Materials Today: Proceedings.

Effect Of Cold Rolling On The Porosity ,Hardness Properties Of The Spray Deposited Al-18%Pb And Al-22%Pb Alloys

K. Pandey, S. Maity, B. Reddy, 2019, Materials Today: Proceedings.

Aluminium (AA7075) Metal Matrix Composite Reinforced with B4C Nano Particles and Effect of Individual Alloying Elements in Al Fabricated by Powder Metallurgy Techniques.

K. Pandey, S. Maity, G. Manohar, 2020, Journal of Physics: Conference Series.

Effect of heat treatment and TiN coating on AISI O1 cold work tool steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2020 .

Mechanical and Scratch behaviour of TiAlN Coated and 3D Printed H13 Tool Steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Advances in Materials and Processing Technologies.

Optimization of Wear Parameters for Duplex-TiAlN Coated MDC-K Tool Steel Using Fuzzy MCDM Techniques

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Operational Research in Engineering Sciences: Theory and Applications.

Box–Behnken based investigation of surface quality and tool wear rate and FEM analysis of tool wear in TiAlN/CrN coated carbide tool

Sunil Kumar, S. Maity, P. Devi, 2022, International Journal on Interactive Design and Manufacturing (IJIDeM).

Morphology and Wear Behavior of Monolayer TiAlN and Composite AlCrN/TiAlN-Coated Plasma-Nitrided DAC-10 Tool Steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Arabian Journal for Science and Engineering.

Relation between mechanical and tribological properties of plasma nitrided and TiCrN coated YXR-7 tool steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, NATIONAL CONFERENCE ON PHYSICS AND CHEMISTRY OF MATERIALS: NCPCM2020.

Evaluation of Crack resistance and Adhesive Energy of AlCrN and Ag doped a-C Films deposited on Chrome Nitrided 316 LVM Stainless Steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Advances in Materials and Processing Technologies.

DLC/CrN or AlCrN/CrN composite films: The better candidate in terms of anti-Wear performance and lesser ion release in hip implant

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021 .

Structural and corrosion study of a-C film with Ti, Cr and Ni interlayers

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, NATIONAL CONFERENCE ON PHYSICS AND CHEMISTRY OF MATERIALS: NCPCM2020.

Tool steel material selection using PROMETHEE II method

Shankar Chakraborty, Saikat Ranjan Maity, S. Chakraborty, 2015 .

Application of Integrated BWM Fuzzy-MARCOS Approach for Coating Material Selection in Tooling Industries

Saikat Ranjan Maity, Lokeswar Patnaik, Sunil Kumar, 2021, Materials.

Mechanical Characterization of Bio-epoxy Green Composites Derived from Sodium Bicarbonate Treated Punica Granatum Short Fiber Agro-waste

Divya Zindani, Sumit Bhowmik, Saikat Ranjan Maity, 2020, Journal of Polymers and the Environment.

A material selection approach using the TODIM (TOmada de Decisao Interativa Multicriterio) method and its analysis

Shankar Chakraborty, Divya Zindani, Sumit Bhowmik, 2017 .

A Review on Slug Reversal During Punching And Blanking

Sunil Kumar, Saikat Ranjan Maity, Lokeswar Patnaik, 2019, Materials Today: Proceedings.

Data-driven probabilistic performance of Wire EDM: A machine learning based approach

S. Dey, S. Maity, Subhankar Saha, 2021, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

Complex interval-valued intuitionistic fuzzy TODIM approach and its application to group decision making

Divya Zindani, Sumit Bhowmik, Saikat Ranjan Maity, 2020, Journal of Ambient Intelligence and Humanized Computing.

Interval-valued intuitionistic fuzzy TODIM method based on Schweizer–Sklar power aggregation operators and their applications to group decision making

Divya Zindani, Sumit Bhowmik, Saikat Ranjan Maity, 2020, Soft Computing.

Decision making tools for optimal material selection: A review

Divya Zindani, Sumit Bhowmik, Saikat Ranjan Maity, 2020 .

Exploring the Potential of Graphene as an EMI Shielding Material – An Overview

S. Maity, A. Deoghare, Papari Das, 2020 .

A comparative study on wear behaviors of hot work and cold work tool steel with same hardness under dry sliding tribological test

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021 .

A novel decision-making tool for performance evaluation of vegetable oils used as heat transfer fluids in concentrated solar power plants

D. Zindani, S. Maity, S. Bhowmik, 2022, Environment, Development and Sustainability.

Extended TODIM method based on normal wiggly hesitant fuzzy sets for deducing optimal reinforcement condition of agro-waste fibers for green product development

Divya Zindani, Sumit Bhowmik, Saikat Ranjan Maity, 2021 .

Experimental Investigation of Dimensional Deviation of Square Punches Cut by Wire EDM of A286 Superalloy

S. Dey, S. Maity, Subhankar Saha, 2021 .

Turbine blade material selection using fuzzy analytic network process

Shankar Chakraborty, Saikat Ranjan Maity, S. Chakraborty, 2012 .

Machining Performance Evaluation of Al 6061 T6 Using Abrasive Water Jet Process

S. Maity, Pankaj Kr. Shahu, 2019 .

Excogitating Material Rankings Using Novel Aggregation Multiplicative Rule (AMR): A Case for Material Selection Problems

D. Zindani, S. Maity, S. Bhowmik, 2020, Arabian Journal for Science and Engineering.

A concurrent decision-making approach toward uncertainty, vagueness and risk appetite for sustainable manufacturing systems

D. Zindani, S. Maity, S. Bhowmik, 2020, Clean Technologies and Environmental Policy.

Prediction of WEDM Performances Using Clustering Techniques in ANFIS During Machining of A286 Superalloy

S. Dey, S. Maity, Subhankar Saha, 2023, Journal of the Institution of Engineers (India) Series C.

A novel BWM integrated MABAC decision-making approach to optimize the wear parameter of CrN/TiAlSiN coating

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Journal of Industrial and Management Optimization.

Lubricated sliding of CFRPEEK/AlCrN film tribo-pair and its effect on the mechanical properties and structural integrity of the AlCrN film

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021 .

Fuzzy-EDAS (Evaluation Based on Distance from Average Solution) for Material Selection Problems

Divya Zindani, Sumit Bhowmik, Saikat Ranjan Maity, 2019, Lecture Notes on Multidisciplinary Industrial Engineering.

Optimization of ultrasonic machining (USM) parameters on micro hole drilling of graphene oxide/pineapple leaf filler reinforced epoxy hybrid composite using evaluation based on distance from average solution (EDAS) method

D. Zindani, S. Maity, A. Bania, 2021 .

Color Image Segmentation using Type-2 Fuzzy Sets

Jaya Sil, Saikat Maity, J. Sil, 2009 .

Supercritical boiler material selection using fuzzy analytic network process

Shankar Chakraborty, Saikat Ranjan Maity, S. Chakraborty, 2012 .

Denoising of images using fuzzy rulebase and clustering approach

J. Sil, S. Maity, 2014, 2014 Conference on IT in Business, Industry and Government (CSIBIG).

A novel fuzzy-prospect theory approach for hydrogen fuel cell component supplier selection for automotive industry

D. Zindani, S. Maity, Rishav Raj Singh, 2024, Expert Syst. Appl..

Characterisation of laser-cladded 410 stainless steel for in situ repair of turbine blade

S. Maity, Bipul Das, Dhiraj Raj, 2024, Surface Engineering.

Optimization of Process Parameters of Laser Cladding on AISI 410 Using MEREC Integrated MABAC Method

S. Maity, Bipul Das, Dhiraj Raj, 2023, Arabian Journal for Science and Engineering.

A Decision-Making Approach for Material Selection of Polymeric Composite Bumper Beam

D. Zindani, S. Maity, S. Bhowmik, 2018 .