J. Ruzic

发表

Synthesis and multiple hardening of a rapidly solidified iron-based matrix

D. Božić, N. Stanković, J. Ruzic, 2018 .

Influence of the fabrication process of copper matrix composites on cavitation erosion resistance

D. Božić, J. Ruzic, J. Stašić, 2018 .

Prediction of hardness and electrical properties in ZrB2 particle reinforced metal matrix composites using artificial neural network

D. Božić, J. Ruzic, D. Antanasijević, 2014 .

Data analytics approach to predict the hardness of copper matrix composites

D. Božić, J. Ruzic, R. Sahara, 2020, 2002.10649.

Synthesis and characteristics of precipitation hardened Cu–Cr alloy and multiply hardened Cu–Cr–Al2O3 nanocomposite obtained using powder metallurgy techniques

D. Božić, J. Ruzic, J. Stašić, 2014 .

Edible blend films of pectin and poly(ethylene glycol): Preparation and physico-chemical evaluation

G. Santagata, M. Malinconico, J. Ruzic, 2017 .

Temperature-dependent deformation behavior of γ and γ′ single-phase nickel-based superalloys

J. Ruzic, I. Watanabe, T. Osada, 2021 .

An investigation on synthesis development of high hardened, high conductivity Cu-Zr and Cu-Zr-ZrB2 alloys through green compact laser sintering

D. Božić, J. Ruzic, J. Stašić, 2015 .

Synthesis and multiple hardening of a rapidly solidified iron-based matrix

D. Božić, J. Ruzic, J. Stašić, 2018, The International Journal of Advanced Manufacturing Technology.

Pectin-polyvinylpyrrolidone films: A sustainable approach to the development of biobased packaging materials

J. Ruzic, A. Onjia, A. Nešić, 2017 .

Mo segregation and distribution in Ti–Mo alloy investigated using nanoindentation

J. Ruzic, I. Watanabe, S. Emura, 2018 .

Laser sintering of Cu–Zr–ZrB2 composite

D. Božić, J. Ruzic, J. Stašić, 2014 .

Synthesis, microstructure and mechanical properties of ZrB2 nano and microparticle reinforced copper matrix composite by in situ processings

D. Božić, J. Ruzic, J. Stašić, 2014 .

Synthesis and Characterization of Cu-ZrB2 Alloy Produced by PM Techniques

D. Božić, J. Ruzic, J. Stašić, 2014 .

An investigation on synthesis development of high hardened, high conductivity Cu-Zr and Cu-Zr-ZrB2 alloys through green compact laser sintering

D. Božić, J. Ruzic, J. Stašić, 2015, The International Journal of Advanced Manufacturing Technology.

Strengthening effects in precipitation and dispersion hardened powder metallurgy copper alloys

D. Božić, J. Ruzic, J. Stašić, 2013 .

Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Grp composites with graphite macroparticles

M. Babić, J. Ruzic, S. Mitrovic, 2014 .

Synthesis and properties of a Cu–Ti–TiB2 composite hardened by multiple mechanisms

J. Ruzic, J. Stašić, V. Rajkovic, 2011 .

Biomimetic synthesis and properties of cellular SiC

J. Ruzic, D. Bučevac, B. Matović, 2014 .

Microstructural and basic mechanical characteristics of ZA27 alloy-based nanocomposites synthesized by mechanical milling and compocasting

J. Ruzic, I. Bobić, A. Vencl, 2018, Journal of Composite Materials.

Effect of synthesis parameters on structural and mechanical properties of Ti 3 Al–Nb–Mo intermetallic compound obtained by powder metallurgy techniques

D. Božić, J. Ruzic, J. Stašić, 2017 .

Analysis of the particle motion during mechanical alloying using EDEM software

J. Ruzic, N. Stoimenov, J. Ružić, 2019, IFAC-PapersOnLine.

Influence of mechanical alloying time on particle size of copper matrix composite

J. Ruzic, K. Jakimovska, D. Karastoyanov, 2015 .

Structural, mechanical and tribological characterization of Zn25Al alloys with Si and Sr addition

J. Ruzic, I. Bobić, A. Vencl, 2014 .

Nano-Indentation Measurement for Heat Resistant Alloys at Elevated Temperatures in Inert Atmosphere

J. Ruzic, I. Watanabe, T. Ohmura, 2019, MATERIALS TRANSACTIONS.

High pressure densification of nanocrystalline mullite powder

J. Ruzic, B. Matović, S. Zec, 2016 .

Safe trapping of cesium into pollucite structure by hot-pressing method

J. Ruzic, S. Mentus, V. Dondur, 2016 .