J. Mayer

发表

Deep learning LSTM for predicting thermally induced geometric errors using rotary axes’ powers as input parameters

Huy Vu Ngoc, J. Mayer, E. Bitar-Nehme, 2022, CIRP Journal of Manufacturing Science and Technology.

J. Mayer, 2019, Precision Manufacturing.

Application of GUF for a multi-output iterative measurement model estimation according to GUM S2 in indirect five-axis CNC machine tool calibration

J. Mayer, A. Los, 2015 .

Application of GUM Supplement 2 to uncertainty estimation of five-axis CNC machines geometric error parameters identification using the SAMBA method

J. Mayer, A. Los, 2013 .

Repeatability of on-machine probing by a five-axis machine tool

Farbod Khameneifar, J. Mayer, S. Sepahi-Boroujeni, 2020 .

Initial tool wear behavior during machining of titanium metal matrix composite (TiMMCs)

M. Balazinski, J. Mayer, X. Duong, 2016 .

Optimal calibration strategy for a five-axis machine tool accuracy improvement using the D-optimal approach

J. Mayer, N. A. Mchichi, 2019, The International Journal of Advanced Manufacturing Technology.

Investigation of accuracy of aerostatic guideways

J.R.R. Mayer, Guy Cloutier, T. Onat Ekinci, 2009 .

Relationships between straightness and angular kinematic errors in machines

J.R.R. Mayer, T. O. Ekinci, J. Mayer, 2007 .

Stresses, stress sensitivities and shape optimization in two‐dimensional linear elasticity by the Boundary Contour Method

Subrata Mukherjee, S. Mukherjee, J. Mayer, 1998 .

Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar

Guy Cloutier, J.R.R. Mayer, Y. Abbaszadeh-Mir, 2002 .

Measurement Accuracy Investigation of Touch Trigger Probe with Five-Axis Machine Tools

Md. Mizanur Rahman, J.R.R. Mayer, J. Mayer, 2016 .

Validation of volumetric error compensation for a five-axis machine using surface mismatch producing tests and on-machine touch probing

J.R.R. Mayer, Mehrdad Givi, J. Mayer, 2014 .

Machine tool calibration: Measurement, modeling, and compensation of machine tool errors

M. A. Donmez, S. Ibaraki, N. Suzuki, 2023, International Journal of Machine Tools and Manufacture.

Efficient uncertainty estimation of indirectly measured geometric errors of five-axis machine tools via Monte-Carlo validated GUM framework

J.R.R. Mayer, Farbod Khameneifar, Saeid Sepahi-Boroujeni, 2021 .

Five axis machine tool volumetric error prediction through an indirect estimation of intra- and inter-axis error parameters by probing facets on a scale enriched uncalibrated indigenous artefact

Mizanur Rahman, J.R.R. Mayer, J. Mayer, 2015 .

Assessment of machine tool trunnion axis motion error, using magnetic double ball bar

J.R.R. Mayer, S.H.H. Zargarbashi, J. Mayer, 2006 .

Magnetic attraction forces between permanent magnet group arrays in a mobile magnetic clamp for pocket machining

Luc Baron, J.R.R. Mayer, A. Mahmud, 2015 .

Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact

J.R.R. Mayer, J. Mayer, 2012 .

Probing Variance Separation on Coordinate Measuring Machines

J.R.R. Mayer, Abdelhak Nafi, J. Mayer, 2011 .

A position independent geometric errors identification and correction method for five-axis serial machines based on screw theory

Jixiang Yang, Yusuf Altintas, J.R.R. Mayer, 2015 .

A ball dome artefact for coordinate metrology performance evaluation of a five axis machine tool

J.R.R. Mayer, Heidarali Hashemiboroujeni, J. Mayer, 2017 .

Volumetric distortion assessment of a five-axis machine by probing a 3D reconfigurable uncalibrated master ball artefact

Tibet Erkan, Yannick Dupont, J. R. René Mayer, 2011 .

Comparison of Direct and Indirect Methods for Five-axis Machine Tools Geometric Error Measurement

Sofiane Achiche, J.R.R. Mayer, Kanglin Xing, 2018 .

Tool path error prediction of a five-axis machine tool with geometric errors

Clément Fortin, J.R.R. Mayer, Y. A. Mir, 2002 .

Diffusion wear mechanism during high-speed machining of 7475-T7351 aluminum alloy with carbide end mills

Marek Balazinski, J.R.R. Mayer, Gilles L'Espérance, 2008 .

Five-Axis Machine Tool Volumetric and Geometric Error Reduction by Indirect Geometric Calibration and Lookup Tables

Kanglin Xing, Mark P. Sanders, Sareh M. Esmaeili, 2021 .

CNC table based compensation of inter-axis and linear axis scale gain errors for a five-axis machine tool from symbolic variational kinematics

J.R.R. Mayer, Sareh M. Esmaeili, J. Mayer, 2021 .

Generation of a 3D error compensation grid from ISO 230-1 error parameters obtained by a SAMBA indirect calibration and validated by a ball-bar spherical test

J.R.R. Mayer, Sareh M. Esmaeili, J. Mayer, 2020, The International Journal of Advanced Manufacturing Technology.

Machine Tool Volumetric Error Features Extraction and Classification Using Principal Component Analysis and K-Means

Sofiane Achiche, J.R.R. Mayer, Kanglin Xing, 2018, Journal of Manufacturing and Materials Processing.

Low-Cost Precision Monitoring System of Machine Tools for SMEs

Zhaoheng Liu, Sofiane Achiche, J.R.R. Mayer, 2021 .

A cluster analysis applied to volumetric errors of five-axis machine tools obtained by probing an uncalibrated artefact

J.R.R. Mayer, J. Mayer, T. Erkan, 2010 .

Optimized volumetric error compensation for five-axis machine tools considering relevance and compensability

J.R.R. Mayer, Mehrdad Givi, J. Mayer, 2016 .

Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensor

J.R.R. Mayer, S.H.H. Zargarbashi, J. Mayer, 2009 .

A pseudo-3D ball lattice artifact and method for evaluating the metrological performance of structured-light 3D scanners

J.R.R. Mayer, Farbod Khameneifar, Pooya Ghandali, 2019, Optics and Lasers in Engineering.

Novel CMM-based implementation of the multi-step method for the separation of machine and probe errors

Adam Wozniak, J.R.R. Mayer, Abdelhak Nafi, 2011 .

An uncalibrated cylindrical indigenous artefact for measuring inter-axis errors of a five-axis machine tool

Md. Mizanur Rahman, J.R.R. Mayer, Anna Los, 2015 .

A full-covariance uncertainty assessment in on-machine probing

Adam Woźniak, J.R.R. Mayer, Farbod Khameneifar, 2021, International Journal of Machine Tools and Manufacture.

Application of the adaptive Monte Carlo method in a five-axis machine tool calibration uncertainty estimation including the thermal behavior

J.R.R. Mayer, A. Los, J. Mayer, 2018, Precision Engineering.

Volumetric error formulation and mismatch test for five-axis CNC machine compensation using differential kinematics and ephemeral G-code

J.R.R. Mayer, Mehrdad Givi, J. Mayer, 2015 .

Predictive compliance based model for compensation in multi-pass milling by on-machine probing

J.R.R. Mayer, R. Guiassa, J. Mayer, 2011 .

The use of low density high accuracy (LDHA) data for correction of high density low accuracy (HDLA) point cloud

Adam Wozniak, J.R.R. Mayer, Michal Bartosz Rak, 2016 .

Deep Learning to Directly Predict Compensation Values of Thermally Induced Volumetric Errors

J. Mayer, E. Bitar-Nehme, Huy Vu Ngoc, 2023, Machines.

Thermal volumetric effects under axes cycling using an invar R-test device and reference length

J.R.R. Mayer, Elie Bitar-Nehme, J. Mayer, 2016 .

Modelling and compensation of dominant thermally induced geometric errors using rotary axes’ power consumption

J. Mayer, E. Bitar-Nehme, 2018 .

Axis Location Errors and Error Motions Calibration for a Five-axis Machine Tool Using the SAMBA Method

J.R.R. Mayer, N. Alami Mchichi, J. Mayer, 2014 .

Five-axis machine tools accuracy condition monitoring based on volumetric errors and vector similarity measures

Sofiane Achiche, J.R.R. Mayer, Kanglin Xing, 2019, International Journal of Machine Tools and Manufacture.

Online monitoring and failure detection of capacitive displacement sensor in a Capball device using fractal analysis

Marek Balazinski, J.R.R. Mayer, Xavier Rimpault, 2018 .

A boundary contour formulation for design sensitivity analysis in two-dimensional linear elasticity

S. Mukherjee, J. Mayer, A. Phan, 1998 .

Finite element and experimental studies of diametral errors in cantilever bar turning

A.-V. Phan, Luc Baron, J.R.R. Mayer, 2003 .

The hypersingular boundary contour method for two-dimensional linear elasticity

S. Mukherjee, J. Mayer, A. Phan, 1998 .

The boundary contour method for two-dimensional linear elasticity with quadratic boundary elements

S. Mukherjee, J. Mayer, A. Phan, 1997 .