M. Zatarain

发表

Implicit subspace iteration as an efficient method to compute milling stability lobe diagrams

Jokin Munoa, Zoltan Dombovari, Mikel Zatarain, 2015 .

Analysis of the Influence of Mill Helix Angle on Chatter Stability

T. Insperger, J. Munoa, M. Zatarain, 2006 .

Unstable Islands in the Stability Chart of Milling Processes Due to the Helix Angle

T. Insperger, J. Munoa, M. Zatarain, 2006 .

Chatter avoidance method for milling process based on sinusoidal spindle speed variation method: simulation and experimental results

J. Munoa, M. Zatarain, I. Bediaga, 2019 .

Implicit subspace iteration as an efficient method to compute milling stability lobe diagrams

Z. Dombovari, J. Munoa, M. Zatarain, 2014, The International Journal of Advanced Manufacturing Technology.

Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts

Lutfi Taner Tunc, Mikel Zatarain, L. T. Tunc, 2019, CIRP Annals.

Process simulation integrated tool axis selection for 5-axis tool path generation

Lutfi Taner Tunc, Erhan Budak, Mikel Zatarain, 2016 .

Application of continuous spindle speed variation for chatter avoidance in roughing milling

Jokin Munoa, I. Bediaga, Mikel Zatarain, 2011 .

Stability of milling processes with continuous spindle speed variation: Analysis in the frequency and time domains, and experimental correlation

Jokin Munoa, I. Bediaga, Mikel Zatarain, 2008 .

The Basics of Time-Domain-Based Milling Stability Prediction Using Frequency Response Function

Zoltan Dombovari, Mikel Zatarain, Markel Sanz-Calle, 2020 .

Stability analysis of milling with irregular pitch tools by the implicit subspace iteration method

Zoltan Dombovari, Mikel Zatarain, Z. Dombovari, 2014 .

INTERACTION BETWEEN MULTIPLE MODES IN MILLING PROCESSES

Zoltan Dombovari, Mikel Zatarain, Jokin Munoa, 2013 .

Analysis of directional factors in milling: importance of multi-frequency calculation and of the inclusion of the effect of the helix angle

Tamás Insperger, Mikel Zatarain, Jokin Muñoa, 2010 .

Analysis of Stability of Structural Modes in Milling Processes

Jokin Munoa, I. Bediaga, Mikel Zatarain, 2009 .

Stability study of the milling process using an exponential force model in frequency domain

Jokin Munoa, Mikel Zatarain, Grégoire Peigné, 2006 .

Prediction of multiple dominant chatter frequencies in milling processes

Alex Iglesias, Zoltan Dombovari, Tamás Insperger, 2011 .

Active suppression of structural chatter vibrations using machine drives and accelerometers

Alex Iglesias, Jokin Munoa, Xavier Beudaert, 2015 .

Receptance coupling for tool point dynamic prediction by fixed boundaries approach

Jokin Munoa, Zoltan Dombovari, Mikel Zatarain, 2014 .

Error budget and stiffness chain assessment in a micromilling machine equipped with tools less than 0.3 mm in diameter

Aitzol Lamikiz, L. N. López de Lacalle, Mikel Zatarain, 2007 .

Improvement of the Performance in Machine Tools by Means of State Space Control Strategies

M. Zatarain, I. Ruiz de Argandona, A. Illarramendi, 2005, Proceedings of the 44th IEEE Conference on Decision and Control.

Self-calibration technique for on-machine spindle-mounted vision systems

José A. Yagüe-Fabra, Mikel Zatarain, Alberto Mendikute, 2018 .

Self-Calibrated In-Process Photogrammetry for Large Raw Part Measurement and Alignment before Machining

Mikel Zatarain, Alvaro Bertelsen, José Antonio Yagüe-Fabra, 2017, Sensors.

Raw part characterisation and automated alignment by means of a photogrammetric approach

Mikel Zatarain, A. Mendikute, I. Inziarte, 2012 .

Machine tools for large parts

Aitor Olarra, Dragos Axinte, L. Uriarte, 2013 .

New Control Techniques Based on State Space Observers for Improving the Precision and Dynamic Behaviour of Machine Tools

Mikel Zatarain, A. Illarramendi, J. L. Azpeitia, 2005 .

Stability analysis of milling with irregular pitch tools by the implicit subspace iteration method

Z. Dombovari, M. Zatarain, 2014, International Journal of Dynamics and Control.

Design of self-tuneable mass damper for modular fixturing systems

Aitor Olarra, Alex Iglesias, Zoltan Dombovari, 2016 .

Chatter suppression in ram type travelling column milling machines using a biaxial inertial actuator

Jokin Munoa, Mikel Zatarain, L. Uriarte, 2013 .

Implicit Subspace Iteration to Improve the Stability Analysis in Grinding Processes

D. Barrenetxea, J. I. Marquínez, B. Izquierdo, 2020, Applied Sciences.

Fixed Boundaries Receptance Coupling Substructure Analysis for Tool Point Dynamics Prediction

Jokin Munoa, Zoltan Dombovari, Mikel Zatarain, 2011 .

Modular Synthesis of Machine Tools

Mikel Zatarain, E. Lejardi, F. Egaña, 1998 .

Coupled model for simulating active inertial actuators in milling processes

J. Munoa, M. Zatarain, R. Bárcena, 2014, The International Journal of Advanced Manufacturing Technology.

Optimization of Hard Material Roughing by means of a Stability Model

J. Munoa, M. Zatarain, I. Bediaga, 2023 .