B. Moon

发表

Quantitative evaluation for effective removal of phosphorus for SoG-Si

D. Min, E. Jung, B. Moon, 2011 .

The Effect of Gadolinium on the Microstructures and Charpy Impact Properties of Super Duplex Stainless Steels

Sang Wan Lee, B. Moon, M. Kim, 2018, Metals.

Study of metallurgical refinement of silicon using directional solidification for photovoltaic system

Tae-U Yu, B. Moon, Eun Jang, 2012, 2012 38th IEEE Photovoltaic Specialists Conference.

Novel Recycling Method for Boron Removal from Silicon by Thermal Plasma Treatment Coupled with Steam and Hydrogen Gases

Hyunjae Lee, D. Min, B. Moon, 2017 .

Method of recycling titanium scraps via the electromagnetic cold crucible technique coupled with calcium treatment

Hyunjae Lee, J. Park, B. Moon, 2017 .

Application of a Dynamic-Nanoindentation Method to Analyze the Local Structure of an Fe-18 at.% Gd Cast Alloy

B. Moon, Yong Choi, D. Sohn, 2017 .

Mechanical synthesis and rapid consolidation of a nanocrystalline Cu-Al2O3 composite by high frequency induction heated sintering

B. Moon, Dongmok Lee, K. Nam, 2009 .

Preliminary study on Fe Gd alloys as binary alloys and master alloys for potential spent nuclear fuel (SNF) application

B. Moon, Young-Jig Kim, Hyun-Do Jung, 2020 .

Influence of the addition of gadolinium on the microstructure and mechanical properties of duplex stainless steel

B. Moon, K. Jung, Hyun-Do Jung, 2016 .

FABRICATION OF GD CONTAINING DUPLEX STAINLESS STEEL SHEET FOR NEUTRON ABSORBING STRUCTURAL MATERIALS

B. Moon, Yong Choi, D. Sohn, 2013 .

Effect of gadolinium addition on the corrosion, wear, and neutron absorbing behaviors of duplex stainless steel sheet

B. Moon, A. Pirogov, Yong Choi, 2015, The Physics of Metals and Metallography.

Refining of MG-Si by hybrid melting using steam plasma and EMC

Tae-U Yu, B. Moon, Jesik Shin, 2011 .

The mechanism of boron removal in the CaO-SiO2-Al2O3 slag system for SoG-Si

Dong Joon Min, D. Min, E. Jung, 2014 .

Pulsed current activated combustion synthesis and consolidation of ultrafine NbSi2 from mechanically activated powders

B. Moon, K. Nam, I. Shon, 2009 .

Cold Workability and Magnetic Properties of 6% Si Steel

B. Moon, Jesik Shin, B. Kim, 2007 .

The effects of heat treatment condition and Si distribution on order-disorder transition in high Si steels

Hyuck-Mo Lee, B. Moon, Sang-Kon Lee, 2004 .

Alloy design for a low thermal expansion cast iron with enhanced mechanical properties

B. Moon, C. Hong, Seung Min Lee, 1999 .

Effects of alloying elements on hardness improvement and damping capacity of low thermal expansion cast irons

B. Moon, C. Hong, 1998 .

Centrifugal Casting Practice and Microstructure and Mechanical Properties of a 2205 Duplex Stainless Steel

B. Moon, S. Yang, Sang Mok Lee, 2005 .

Failure and corrosion resistance of TiN and TiC coatings deposited on graphite by chemical vapor deposition

B. Moon, R. Erck, P. Maiya, 1998 .

Solidification Parameters Dependent on Interfacial Heat Transfer Coefficient between Aluminum Casting and Copper Mold

B. Moon, Sang-Mok Lee, Hee-Soo Kim, 2005 .

Improvement of tensile strength and corrosion resistance of high-silicon cast irons by optimizing casting process parameters

B. Moon, Bonghwan Kim, Sang-Kon Lee, 2007 .

The Effect of Grain Refinement by Ti Addition on Brazing Characteristic of 4343/3003/4343 Aluminum Clad Sheet

B. Moon, Jesik Shin, 2010 .

Microstructure and Fracture Property of 1A Grade Duplex Stainless Steel with the Addition of Gadolinium

Jae-Han Lim, B. Moon, Hyun-Do Jung, 2016 .

Influence of Gadolinium Addition on Mechanical and Corrosion Properties of 2205 Duplex Stainless Steel

Jae-Han Lim, B. Moon, Young-Jig Kim, 2015 .