B. Feng

Evaluation of Pd composite membrane for pre-combustion CO2 capture

Chenchen Qi, Chun Bao, Chuanyong Hao, 2015 .

Ti atomic bonding environment in Ti-containing hydrocarbon coatings

W. Meng, B. Feng, Jiechao Jiang, 2000 .

Amorphous hydrocarbon based thin films for high-aspect-ratio MEMS applications

W. Meng, B. Feng, K. Kelly, 2001 .

Effects of Cold Rolling on the Microstructure and Corrosion Resistance of the Double-Glow Plasma Ni-Cr Alloying Layer on Q235 Steel

Xiang Chen, B. Feng, Z. Yao, 2022, Materials.

Characterization of microstructure and mechanical behavior of sputter deposited Ti-containing amorphous carbon coatings

W. Meng, G. Doll, B. Feng, 2001 .

Probing for mechanical and tribological anomalies in the TiC/amorphous hydrocarbon nanocomposite coating system

W. Meng, G. Doll, B. Feng, 2001 .

Friction and wear characteristics of ceramic nanocomposite coatings: Titanium carbide/amorphous hydrocarbon

M. Khonsari, W. Meng, B. Feng, 2001 .

Deposition of thin film ceramics and ceramic nanocomposites by inductively coupled plasma assisted hybrid chemical/physical vapor deposition

W. Meng, B. Feng, D. Cao, 2000, ICOPS 2000. IEEE Conference Record - Abstracts. 27th IEEE International Conference on Plasma Science (Cat. No.00CH37087).

Highly sulfur-tolerant Pd composite membranes with a protective layer of MoS2/γ-alumina

Hengyong Xu, B. Feng, Hui Li, 2017 .

Defect size analysis approach combined with silicate gel/ceramic particles for defect repair of Pd composite membranes

Hengyong Xu, B. Feng, Hui Li, 2016 .