D. Xiang

发表

Sulfonated organosilica mesocellular foam for catalyzing bulky molecules

Ziting Tan, Chunrong Xiong, Sihan Chu, 2016 .

Recycling photovoltaic silicon waste for fabricating porous mullite ceramics by low-temperature reaction sintering

R. Liu, D. Xiang, 2021 .

Mullite rod-enhanced porous SiC ceramics prepared at low temperature from photovoltaic waste

D. Xiang, Yanping Ma, Zhiheng Xing, 2018, Journal of the European Ceramic Society.

Improved thermal conductivity of ceramic-epoxy composites by constructing vertically aligned nanoflower-like AlN network

D. Xiang, Li Liu, L. Wu, 2021, Ceramics International.

An all-metal material for high-sensitivity geomagnetic sensors with improved magnetic stability by magnetostatic coupling

Wei Li, J. Teng, D. Xiang, 2011 .

Mechanical properties and microstructural evolution of Mo–Co-co-strengthened W–Ni–Fe alloys by spark plasma sintering

Youpeng Li, D. Xiang, Yanlin Pan, 2017 .

A novel route for the synthesis of CNTs/WC composite powders from melamine and metal oxides

D. Xiang, Shuning Zhao, 2019, Ceramics International.

Fabricating superior thermal conductivity SiC–AlN composites from photovoltaic silicon waste

D. Xiang, J. Tian, Weiran Liu, 2020 .

Synthesis of nano Ti(C,N) powder by mechanical activation and subsequent carbothermal reduction–nitridation reaction

Youpeng Li, D. Xiang, M. Tu, 2009 .

Evolution of phase and microstructure during carbothermal reduction-nitridation synthesis of Ti(C,N)

D. Xiang, M. Tu, Y. Liu, 2008 .

Reaction sequences and influence factors during preparation of Ti(C,N) powders

D. Xiang, M. Tu, Zhiwei Zhao, 2007 .

Fabricating fine-grained tungsten heavy alloy by spark plasma sintering of low-energy ball-milled W–2Mo–7Ni–3Fe powders

Youpeng Li, D. Xiang, Xianzhi Chen, 2013 .

In-situ growth and relevant mechanisms of thick SiC nanowhiskers from hybrid silicon sources

Yue Cao, Yuhang Hu, D. Xiang, 2020 .

Porous SiC-mullite ceramics with high flexural strength and gas permeability prepared from photovoltaic silicon waste

Yuhang Hu, D. Xiang, Yanping Ma, 2020 .

Novel in-situ constructing approach for vertically aligned AlN skeleton and its thermal conductivity enhancement effect on epoxy

D. Xiang, L. Wu, 2022, Ceramics International.

Self-assembling of versatile Si3N4@SiO2 nanofibre sponges by direct nitridation of photovoltaic silicon waste.

D. Xiang, Nannan Zhang, 2021, Journal of hazardous materials.

One-step rapid preparation of CNTs using the spark plasma–assisted pyrolysis of melamine and its photoluminescence properties

Yuhang Hu, D. Xiang, Shuning Zhao, 2019, Journal of Nanoparticle Research.

Microstructure and mechanical properties of fine-grained W–7Ni–3Fe heavy alloy by spark plasma sintering

Youpeng Li, Jianlin Li, D. Xiang, 2012 .

Growth of SiC Whiskers onto Carbonizing Coir Fibers by Using Silicon Slurry Waste

Yue Cao, D. Xiang, Zhiheng Xing, 2017 .

Rapid preparation of SiC fibers by spark plasma assisted vapor silicon infiltration

Yue Cao, D. Xiang, Zhiheng Xing, 2018 .

Reaction sequences and influence factors during carbothermal synthesis of ultrafine TiN powders

D. Xiang, M. Tu, Zhiwei Zhao, 2007 .

Preparation of Activated Nano Anatase/Carbon Powders by High-energy Mechanical Milling

D. Xiang, M. Tu, Yongjie Liu, 2010 .

Synthesis of nano Ti(C,N) powder by mechanical activation assisted carbothermal reduction nitridation

Y. Y. Li, Y. Liu, D. Xiang, 2009 .

Significantly elevated strength of W-Ni3Al alloy by adding trace boron element

D. Xiang, Ruipeng Mao, 2022, International Journal of Refractory Metals and Hard Materials.

Effects of sintering temperature on fine-grained tungsten heavy alloy produced by high-energy ball milling assisted spark plasma sintering

Youpeng Li, Jianlin Li, D. Xiang, 2012 .

Mechanochemical synthesis of ultrafine Ti(C,N)–Al2O3 composite powders and phase transformation

Youpeng Li, Baojun Chen, D. Xiang, 2009 .

Microwave synthesis of nano Ti(C, N)-Ni powders in air from melamine

D. Xiang, K. Huang, Hui Li, 2018, Ceramics International.

Rapid synthesis of SiC powders by spark plasma-assisted carbothermal reduction reaction

Jianbao Li, D. Xiang, Fengfeng Wang, 2017 .

Low temperature synthesis of nano Ti(C,N) by novel mechanical and thermal activation method

Y. Liu, D. Xiang, M. Tu, 2015 .

Effect of two-time spark plasma sintering on microstructure and mechanical properties of W–6Ni–4Mn alloy

D. Xiang, Yanlin Pan, Zhishuai Fan, 2019, Materials Science and Engineering: A.

Enhancement of mechanical properties of tungsten alloy via disordered microstructure and solid solution strengthening

D. Xiang, Ruipeng Mao, 2023, Materials & Design.

Phase, microstructure and properties evolution of fine-grained W–Mo–Ni–Fe alloy during spark plasma sintering

Y. Y. Li, Jianlin Li, D. Xiang, 2012 .

Improved mechanical properties of tungsten alloy by flaky Ni3Al and trace B2O3 synergistic reinforcement

D. Xiang, Ruipeng Mao, 2022, Journal of Alloys and Compounds.

Fast Preparation of Ultrafine SiC Crystals from Silicon Cutting Waste and Biomass

D. Xiang, Ruipeng Mao, Rong Ren, 2021, Waste and Biomass Valorization.

Fast Preparation of Ultrafine SiC Crystals from Silicon Cutting Waste and Biomass

D. Xiang, Ruipeng Mao, Rong Ren, 2021 .

In situ synthesis of TiC cermet by spark plasma reaction sintering

D. Xiang, Yanlin Pan, Ding Lei, 2016 .

Spark plasma assisted carbothermal reduction-nitridation synthesis of (Ti, W, Mo)(C, N)-(Ni, Co) powders

Yue Cao, D. Xiang, Shuning Zhao, 2017 .

Enhanced mechanical properties of tungsten alloy by synergistic strengthening of flaky Ni3Al and Al2O3 nano-particles

D. Xiang, Ruipeng Mao, Zhishuai Fan, 2021, Journal of Alloys and Compounds.

Mechanical Milling-Assisted Spark Plasma Sintering of Fine-Grained W-Ni-Mn Alloy

Ning Wang, D. Xiang, Yanlin Pan, 2018, Materials.

Vacuum Synthesis of Nanocrystalline TiC at a Low Carbothermal Reduction Temperature

D. Xiang, L. Ding, C. Liu, 2013 .

Hierarchically designed evaporators with dual-layered hydrogel/aerogel structure for efficient solar water evaporation

D. Xiang, Ziyu Gui, 2023, Separation and Purification Technology.

Preparation of fine-grained tungsten heavy alloys by spark plasma sintered W–7Ni–3Fe composite powders with different ball milling time

Y. Y. Li, D. Xiang, Ding Lei, 2013 .

Preparing W-Ni3al Alloy at Low Sintering Temperature by Adding Moo3: Microstructure, Mechanical Properties, and Salt Spray Corrosion

D. Xiang, Ruipeng Mao, 2023, SSRN Electronic Journal.

Effects of different Pt intercalation locations on the transport properties of spin-polarized electrons in NiFe films

J. Teng, D. Xiang, L. Ding, 2014 .

Control of spin-polarized electron magnetoresistance in Ta/NiFe/Ta films by intercalation of Au

J. Teng, D. Xiang, L. Ding, 2013 .

Efficient solar water evaporation enabled by Ti3O5/Ti4O7-based melamine-urea-formaldehyde aerogel evaporators

D. Xiang, Zirui Yang, Ziyu Gui, 2023, Chemical Engineering Journal.

Effects of annealing temperature on the magnetoresistance in Ta/NiFe/Ta films by ZnO intercalations

J. Teng, D. Xiang, L. Ding, 2015 .