J. Quibén

发表

New prediction methods for CO2 evaporation inside tubes: Part I – A two-phase flow pattern map and a flow pattern based phenomenological model for two-phase flow frictional pressure drops

J. Thome, Lixin Cheng, G. Ribatski, 2008 .

Flow pattern based two-phase frictional pressure drop model for horizontal tubes. Part I: Diabatic and adiabatic experimental study

J. Thome, J. Quibén, 2007 .

Flow pattern based two-phase frictional pressure drop model for horizontal tubes, Part II: New phenomenological model

J. Thome, J. Quibén, 2007 .

Experimental and analytical study of two-phase pressure drops during evaporation in horizontal tubes

J. Quibén, 2005 .

Flow boiling in horizontal flattened tubes: Part I ― Two-phase frictional pressure drop results and model

John R. Thome, Lixin Cheng, J. Thome, 2009 .

Comparison of experimental pressure drop data for two phase flows to prediction methods using a general model

J. Thome, A. W. Mauro, R. Mastrullo, 2007 .

Nonequilibrium Phenomena in Microemulsions

J. Quibén, A. Nóvoa, M. Quintela, 1988 .

Ammonia two-phase flow in a horizontal smooth tube: Flow pattern observations, diabatic and adiabatic frictional pressure drops and assessment of prediction methods

J. Thome, J. Quibén, T. Boyman, 2009 .

Flow boiling in horizontal flattened tubes: Part II – Flow boiling heat transfer results and model

J. Thome, Lixin Cheng, J. Quibén, 2009 .

Nonequilibrium phenomena in critical microemulsions

J. Quibén, C. Ferreiro, A. Nóvoa, 1988 .

Flow boiling in horizontal smooth tubes: New heat transfer results for R-134a at three saturation temperatures

John R. Thome, J. Thome, J. Quibén, 2009 .

Erratum to “New prediction methods for CO2 evaporation inside tubes: Part I – A two-phase flow pattern map and a flow pattern based phenomenological model for two-phase flow frictional pressure drops” [Int. J. Heat Mass Transfer 51 (1–2) (2008) 111–124]

J. Thome, Lixin Cheng, G. Ribatski, 2012 .

Effect of Local Hot Spots on the Maximum Dissipation Rates During Flow Boiling in a Microchannel

J. Thome, J. Quibén, R. Revellin, 2008, IEEE Transactions on Components and Packaging Technologies.