S. Rajaraman

发表

A Stretchable Microneedle Electrode Array for Stimulating and Measuring Intramuscular Electromyographic Activity

Ashton L. Cheek, Chancellor S. Shafor, T. Nichols, 2017, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

Electrodeposited Metal Structures in High Aspect Ratio Cavities using Vapor Deposited Polymer Molds and Laser Micromachining

R. Shafer, M. Allen, S. Rajaraman, 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

Multimodal Microfluidic Biosensor With Interdigitated Electrodes (IDE) And Microelectrode Array (MEA) For Bacterial Detection And Identification

S. Rajaraman, A. Kundu, Tariq Ausaf, 2019, 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII (TRANSDUCERS & EUROSENSORS XXXIII).

Rapid, low cost microfabrication technologies toward realization of devices for dielectrophoretic manipulation of particles and nanowires

P. Hesketh, S. Rajaraman, D. Gottfried, 2006 .

Three-Dimensional Metal Transfer Micromolded Microelectrode Arrays (MEAS) for In-Vitro Brain Slice Recordings

M. Allen, S. DeWeerth, M. McClain, 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

Micromachined three-dimensional electrode arrays for transcutaneous nerve tracking

Mark G. Allen, J. A. Bragg, Swaminathan Rajaraman, 2011 .

Microfabrication technologies for a coupled three-dimensional microelectrode, microfluidic array

Stephen P. DeWeerth, Mark G. Allen, Ari Glezer, 2007 .

Micromachining Techniques for Realization of Three-Dimensional Microelectrode Arrays

S. Rajaraman, 2014 .

Development of in vitro 2D and 3D microelectrode arrays and their role in advancing biomedical research

S. Rajaraman, D. DeRoo, A. Kundu, 2020, Journal of Micromechanics and Microengineering.

Dielectrophoresis Based Micro-Devices for Separation and Analysis of MicroParticles

S. Rajaraman, Jamie McNeir, 2006 .

Low-Power, Multimodal Laser Micromachining of Materials for Applications in sub-5 µm Shadow Masks and sub-10 µm Interdigitated Electrodes (IDEs) Fabrication

S. Rajaraman, Cacie Hart, 2020, Micromachines.

Precision Vascular Delivery of Agrochemicals with Micromilled Microneedles (µMMNs)

S. Rajaraman, S. Santra, A. Kundu, 2019, Scientific Reports.

Micromachining on and of Transparent Polymers for Patterning Electrodes and Growing Electrically Active Cells for Biosensor Applications

Ricardo Aguilar, S. Rajaraman, J. Ross, 2017, Micromachines.

DEVELOPMENT OF A STRETCHABLE, PENETRATING ELECTRODE ARRAY FOR MEASURING INTRAMUSCULAR ELECTROMYOGRAPHIC ACTIVITY

S. DeWeerth, Liang Guo, S. Rajaraman, 2013 .

Makerspace microfabrication of a stainless steel 3D microneedle electrode array (3D MEA) on a glass substrate for simultaneous optical and electrical probing of electrogenic cells

S. Rajaraman, A. Kundu, F. Sommerhage, 2020, RSC advances.

Microfabrication technologies for a coupled three-dimensional microelectrode, microfluidic array

R. Shafer, M. Allen, A. Glezer, 2006 .

Biocompatibility of Blank, Post-Processed and Coated 3D Printed Resin Structures with Electrogenic Cells

S. Rajaraman, F. Sommerhage, C. Didier, 2020, Biosensors.

Polydimethylsiloxane Microstencils Molded on 3-D-Printed Templates

S. DeWeerth, G. Guvanasen, S. Rajaraman, 2014, Journal of Microelectromechanical Systems.

Fabrication and Characterization of a 3D Printed, MicroElectrodes Platform With Functionalized Electrospun Nano-Scaffolds and Spin Coated 3D Insulation Towards Multi- Functional Biosystems

Yuen Yee Li Sip, L. Zhai, S. Rajaraman, 2019, Journal of Microelectromechanical Systems.

Precision Plating of Human Electrogenic Cells on Microelectrodes Enhanced With Precision Electrodeposited Nano-Porous Platinum for Cell-Based Biosensing Applications

J. Hickman, S. Rajaraman, F. Sommerhage, 2019, Journal of Microelectromechanical Systems.

Liquid-Loaded Piezo-Silicon Micro-Disc Oscillators for Pico-Scale Bio-Mass Sensing

R. Abdolvand, S. Rajaraman, A. Todi, 2020, Journal of Microelectromechanical Systems.

Plotter Cut Stencil Masks for the Deposition of Organic and Inorganic Materials and a New Rapid, Cost Effective Technique for Antimicrobial Evaluations

S. Rajaraman, S. Santra, A. Baksh, 2022, Micromachines.

A minimally invasive, micromilled, microneedle flexible patch array (μNFPA) for transdermal hydration sensing

S. Rajaraman, A. Kundu, Spencer A Langevin, 2021 .

Biphasic burst and sustained transdermal delivery in vivo using an AI-optimized 3D-printed MN patch.

S. Rajaraman, A. Bagde, A. Kundu, 2023, International journal of pharmaceutics.

DLP 3D Printed “Intelligent” Microneedle Array (iμNA) for Stimuli Responsive Release of Drugs and Its in Vitro and ex Vivo Characterization

S. Rajaraman, Mandip Singh, A. Bagde, 2020, Journal of Microelectromechanical Systems.

Recent advances in three-dimensional microelectrode array technologies for in vitro and in vivo cardiac and neuronal interfaces.

Swaminathan Rajaraman, Deok-Ho Kim, Jong Seob Choi, 2020, Biosensors & bioelectronics.

High-throughput microbead assay system with a portable, cost-effective Wi-Fi imaging module, and disposable multi-layered microfluidic cartridges for virus and microparticle detection, and tracking

S. Rajaraman, D. DeRoo, F. Sommerhage, 2022, Biomedical Microdevices.

Fiber‐Type Solar Cells, Nanogenerators, Batteries, and Supercapacitors for Wearable Applications

Jayan Thomas, Swaminathan Rajaraman, Sudipta Seal, 2018, Advanced science.

Optimization of makerspace microfabrication techniques and materials for the realization of planar, 3D printed microelectrode arrays in under four days

Swaminathan Rajaraman, Avra Kundu, S. Rajaraman, 2019, RSC advances.

A Microfluidic MEMS-Microbalance Platform With Minimized Acoustic Radiation in Liquid

R. Abdolvand, S. Rajaraman, A. Todi, 2019, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

Capabilities and limitations of 3D printed microserpentines and integrated 3D electrodes for stretchable and conformable biosensor applications

Swaminathan Rajaraman, Avra Kundu, S. Rajaraman, 2020, Microsystems & nanoengineering.

Fabrication and Characterization of 3D Printed, 3D Microelectrode Arrays for Interfacing with a Peripheral Nerve-on-a-Chip.

M. J. Moore, Anup D. Sharma, S. Rajaraman, 2020, ACS biomaterials science & engineering.

Hollow polymer microneedle array fabricated by photolithography process combined with micromolding technique

Mark G. Allen, Brock A. Wester, Po-Chun Wang, 2009, 2009 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

Rapid Nanofabrication of Nanostructured Interdigitated Electrodes (nIDEs) for Long-Term In Vitro Analysis of Human Induced Pluripotent Stem Cell Differentiated Cardiomyocytes

Sreekanth J. Varma, Jayan Thomas, S. Rajaraman, 2018, Biosensors.

Pluripotent Stem Cell Differentiated Cardiomyocytes

Sreekanth J. Varma, Jayan Thomas, S. Rajaraman, 2019 .

A Stretchable Microneedle Electrode Array for Stimulating and Measuring Intramuscular Electromyographic Activity

Liang Guo, T. Richard Nichols, Swaminathan Rajaraman, 2022 .

Development and characterization of a packaged mechanically actuated microtweezer system

Mark G. Allen, Brock A. Wester, Swaminathan Rajaraman, 2011 .

Tin oxide nanosensor fabrication using AC dielectrophoretic manipulation of nanobelts

Zhong Lin Wang, P. Hesketh, Surajit Kumar, 2005 .

Fabrication and Characterization of Polymer Hollow Microneedle Array Using UV Lithography Into Micromolds

M. Allen, S. Rajaraman, S. Paik, 2013, Journal of Microelectromechanical Systems.

Microfabricated polymer-metal biosensors for multifarious data collection from electrogenic cellular models

S. Rajaraman, A. Baksh, Charles M. Didier, 2023, Microsystems & Nanoengineering.

Fully Integrated 3D Microelectrode Arrays with Polydopamine-Mediated Silicon Dioxide Insulation for Electrophysiological Interrogation of a Novel 3D Human, Neural Microphysiological Construct.

M. J. Moore, Yuen Yee Li Sip, L. Zhai, 2023, ACS applied materials & interfaces.

Experimental and Modeling Based Investigations of Process Parameters on a Novel, 3D Printed and Self-Insulated 24-Well, High-Throughput 3D Microelectrode Array Device for Biological Applications

S. Rajaraman, Jorge Manrique Castro, 2022, Journal of Microelectromechanical Systems.

Compact Micro-Stereolithographic (µSLA) Printed, 3D Microelectrode Arrays (3D MEAS) with Monolithically Defined Positive and Negative Relief Features For in Vitro Cardiac Beat Sensing

S. Rajaraman, A. Kundu, Cacie Hart, 2022, 2022 IEEE 35th International Conference on Micro Electro Mechanical Systems Conference (MEMS).

Investigation of the Enhanced Sensitivity of Interdigitated Electrodes for Cellular Biosensing With Geometric, Nanostructured Surface Area, and Surface Plasmon Resonance Modes

Jayan Thomas, S. Rajaraman, Jinxin Li, 2020, Journal of Microelectromechanical Systems.

SeedEZTM Interdigitated Electrodes and Multifunctional Layered Biosensor Composites (MLBCs): A Paradigm Shift in the Development of In Vitro BioMicrosystems

S. Rajaraman, A. Kundu, J. T. Shoemaker, 2020, Journal of Microelectromechanical Systems.

Facile, Packaging Substrate-Agnostic, Microfabrication and Assembly of Scalable 3D Metal Microelectrode Arrays for in Vitro Organ-on-a-Chip and Cellular Disease Modeling

S. Rajaraman, A. Kundu, Charles M. Didier, 2019, 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII (TRANSDUCERS & EUROSENSORS XXXIII).

Micromachined three-dimensional electrode arrays for in-vitro and in-vivo electrogenic cellular networks

S. Rajaraman, 2009 .

3-D PATTERNED MICROSTRUCTURES USING INCLINED UV EXPOSURE AND METAL TRANSFER MICROMOLDING

M. Allen, Y. Yoon, Seong-O Choi, 2006 .

3D Printing, Ink Casting and Micromachined Lamination (3D PICLμM): A Makerspace Approach to the Fabrication of Biological Microdevices

Swaminathan Rajaraman, Avra Kundu, S. Rajaraman, 2018, Micromachines.

Metal-Transfer-Micromolded Three-Dimensional Microelectrode Arrays for in-vitro Brain-Slice Recordings

M C LaPlaca, M. McClain, M. LaPlaca, 2011, Journal of Microelectromechanical Systems.

Fabrication and Characterization of 3D Printed, 3D Microelectrode Arrays for Interfacing with a Peripheral Nerve-on-a-Chip.

M. J. Moore, Anup D. Sharma, S. Rajaraman, 2020, ACS biomaterials science & engineering.

A unique fabrication approach for microneedles using coherent porous silicon technology

Swaminathan Rajaraman, H. T. Henderson, H. Henderson, 2005 .

Electrochemical Sensors for Lead Ion Detection Using Sodium Alginate Crosslinked With 2-Acrylamido-2-Methylpropane Sulfonic Acid and Aluminum Microparticles

S. Rajaraman, Pawan Pathak, Mohammadreza Chimerad, 2023, IEEE Sensors Letters.

BacteSign: Building a Findable, Accessible, Interoperable, and Reusable (FAIR) Database for Universal Bacterial Identification

S. Rajaraman, S. Santra, Andre Childs, 2024, Biosensors.

Polydopamine surface functionalization of 3D printed resin material for enhanced polystyrene adhesion towards insulation layers for 3D microelectrode arrays (3D MEAs)

L. Zhai, S. Rajaraman, D. Appavoo, 2022, RSC advances.