R. Gaidys

发表

Multiphysical modeling of a contact-type piezo-transducer for the analysis of micro-energy harvesting from ambient vibrations

ius, G. Kulvietis, R. Daukševi, 2011 .

Nonlinear piezoelectric vibration energy harvester with frequency-tuned impacting resonators for improving broadband performance at low frequencies

Danick Briand, Vytautas Ostasevicius, Rolanas Dauksevicius, 2019, Smart Materials and Structures.

Development of a Piezoelectric Actuator for Separation and Purification of Biological Microparticles

V. Jurenas, V. Ostaševičius, R. Gaidys, 2020 .

Microsystems for the Effective Technological Processes

Vytautas Jurenas, Giedrius Janusas, Vytautas Ostasevicius, 2017 .

Study of Vibration Milling for Improving Surface Finish of Difficult-to-cut Materials

V. Ostaševičius, R. Gaidys, R. Dauksevicius, 2013 .

Investigation of Electrostatic Cantilever-Type Micromechanical Actuator

V. Ostaševičius, S. Tamulevičius, A. Bubulis, 2006 .

Dynamic Finite Element Analysis of Cantilever-type Electrostatic MEMS Switch

V. Ostaševičius, A. Bubulis, R. Gaidys, 2005 .

Vibroacoustic handling and levitation of microparticles in air

V. Jurenas, V. Ostaševičius, R. Gaidys, 2017 .

Development of Microsystems Multi Physics Investigation Methods

V. Jurenas, A. Palevicius, V. Ostaševičius, 2017 .

Passive optimal tool structures for vibration cutting

ius, V. Ostaševi, R. Gaidys, 2012 .

Nr . 4 ( 78 ) The Smart Stick adaptive structure

R. Gaidys, C. Lira, K. Pilkauskas, 2009 .

Investigation of the Surface States in Heavily Doped GaAs by Kelvin Probe

R. Gaidys, S. Sakalauskas, V. Filipavičius, 1987, February 16.

Analysis of microstructure replication using vibratory assisted thermal imprint process

P. Palevičius, A. Palevicius, Amer Sodah, 2018, Microsystem Technologies.

Ultra-Morphology and Mechanical Function of the Trichoideum Sensillum in Nabis rugosus (Linnaeus, 1758) (Insecta: Heteroptera: Cimicomorpha)

I. Poprawa, R. Gaidys, J. Brożek, 2022, Insects.

Ultrasonic tooling system design and development for single point diamond turning (SPDT) of ferrous metals

O. Dambon, V. Ostaševičius, R. Gaidys, 2017, The International Journal of Advanced Manufacturing Technology.

Research of nonlinear electromechanical and vibro-impact interactions in electrostatically driven microactuator

V. Ostasevicius, R. Gaidys, R. Dauksevicius, 2008 .

Simulations of the working contact loads of a tillage element

R. Gaidys, V. Jankauskas, Remigijus Skirkus, 2016 .

Simulations of the working contact loads of a tillage element

R. Gaidys, V. Jankauskas, Remigijus Skirkus, 2016, Journal of Friction and Wear.

Segmentation of a Vibro-Shock Cantilever-Type Piezoelectric Energy Harvester Operating in Higher Transverse Vibration Modes

Vytautas Daniulaitis, Vytautas Ostasevicius, Rolanas Dauksevicius, 2015, Sensors.

Ultrasonic tooling system design and development for single point diamond turning (SPDT) of ferrous metals

O. Dambon, V. Ostaševičius, R. Gaidys, 2017 .

Direct observation of spontaneous polarization induced electron charge transfer in stressed ZnO nanorods

E. O’Reilly, I. Lukács, R. Gaidys, 2018 .

An approach based on tool mode control for surface roughness reduction in high-frequency vibration cutting

Vytautas Ostasevicius, Rimvydas Gaidys, J. Rimkeviciene, 2010 .

Monitoring the condition of the cutting tool using self-powering wireless sensor technologies

V. Ostasevicius, R. Gaidys, V. Augutis, 2017 .

Vibro-Shock Dynamics Analysis of a Tandem Low Frequency Resonator—High Frequency Piezoelectric Energy Harvester

Vytautas Ostasevicius, Rimvydas Gaidys, Birute Narijauskaite, 2017, Sensors.

MOEMS-Assisted Radial Pulse Measurement System Development

Vytautas Jurenas, Giedrius Janusas, Vytautas Ostasevicius, 2017 .

Separation of Microparticles from Suspension Utilizing Ultrasonic Standing Waves in a Piezoelectric Cylinder Actuator

V. Jurenas, A. Aleksa, V. Ostaševičius, 2018 .

Frequency up-converting Vibration Energy Harvester with Multiple Impacting Beams for Enhanced Wideband Operation at Low Frequencies

Danick Briand, Rolanas Dauksevicius, Vytautas Ostasevicius, 2014 .

Ultrastructure of a Mechanoreceptor of the Trichoid Sensilla of the Insect Nabis rugosus: Stimulus-Transmitting and Bio-Sensory Architecture

R. Gaidys, J. Brożek, Shashikanth Chakilam, 2023, Bioengineering.

Numerical Analysis of Dynamic Effects of a Nonlinear Vibro-Impact Process for Enhancing the Reliability of Contact-Type MEMS Devices

Vytautas Ostasevicius, Rolanas Dauksevicius, Rimvydas Gaidys, 2009, Sensors.

Analysis of microstructure replication using vibratory assisted thermal imprint process

P. Palevičius, Amer Sodah, G. Janusas, 2018, Microsystem Technologies.

Polycarbonate as an Elasto-Plastic Material Model for Simulation of the Microstructure Hot Imprint Process

Giedrius Janusas, Arvydas Palevicius, Rimvydas Gaidys, 2013, Sensors.

Vibration Energy Harvester (VEH) for a Free Body Moving in Space at Vibro Shock Mode

R. Gaidys, V. Daniulaitis, B. Narijauskaite, 2022, Mechanics.

Simulation of hot imprint process of periodic microstructure using elasto-plastic material model

ius, G. Janusas, R. Gaidys, 2011 .

Identification of Capacitive MEMS Accelerometer Structure Parameters for Human Body Dynamics Measurements

Vytautas Ostasevicius, Vincas Benevicius, Rimvydas Gaidys, 2013, Sensors.

AGENT-BASED METHODOLOGY FOR DEVELOPING MECHATRONIC SYSTEMS SOFTWARE

Rimvydas Gaidys, E. Kazanavicius, L. Kizauskiene, 2011 .

Numerical analysis of fluid–structure interaction effects on vibrations of cantilever microstructure

Vytautas Ostasevicius, Rolanas Dauksevicius, Arvydas Palevicius, 2007 .