J. Ma

发表

Lead-based titanate ferroelectric thin films fabricated by a sol–gel technique

Chuanzhong Chen, Tiefeng Liu, D. Wang, 2008 .

Effect of Quenching and Partitioning Heat Treatment on Ductile Cast Irons

Yang Wang, J. Ma, P. Zhao, 2016 .

Welding of Aluminum Alloys to Steels: An Overview

R. Kovacevic, M. Mazar Atabaki, R. Kovacevic, 2014 .

Combustion synthesis/densification of an Al2O3–TiB2 composite

E. Olevsky, M. Meyers, J. Ma, 2001 .

Novel PEEK/nHA composites fabricated by hot-pressing of 3D braided PEEK matrix

B. Tang, J. Ma, Z. Li, 2020, Advanced Composites and Hybrid Materials.

In vitro degradability and bioactivity of mesoporous CaO-MgO-P2O5-SiO2 glasses synthesized by sol–gel method

Chuanzhong Chen, J. Ma, C. Z. Chen, 2010 .

The Tribological Behavior of As-Sprayed Graphene Oxide–Tungsten Disulfide Hybrid Coatings

A. Riahi, J. Ma, O. Gali, 2019, Tribology Transactions.

In vitro degradability and apatite-formation ability of monticellite (CaMgSiO4) bioceramic

J. Ma, X. C. Zhao, Baoxu Huang, 2019, Ceramics International.

Colloidal characterization and electrophoretic deposition of hydroxyapatite on titanium substrate

L. Kong, J. Ma, C. H. Liang, 2003, Journal of materials science. Materials in medicine.

Textural and structural studies of sol–gel derived SiO2–CaO–P2O5–MgO glasses by substitution of MgO for CaO

Chuanzhong Chen, J. Ma, D. Wang, 2010 .

SURFACE BEHAVIOR OF BIOACTIVE GLASS OF Si–Na–Ca–P SYSTEM IN SIMULATED BODY FLUID

Chuanzhong Chen, D. Wang, J. Ma, 2007 .

Application of back-propagation neural network technique to high-energy planetary ball milling process for synthesizing nanocomposite WC–MgO powders

J. Ma, J. Ma, S. G. Zhu, 2009 .

Influence of La2O3 addition on hardness, flexural strength and microstructure of hot-pressing sintered WC–MgO bulk composites

Yaopeng Zhang, J. Ma, P. Di, 2011 .

Effects of Mechanical Activation during the Synthesis of Tungsten Carbide Powders by Carbothermic Reduction of Tungsten Oxide

J. Ma, H. Ding, Shigen Zhu, 2011 .

Sequential deposition of copper/alumina composites

Xiaogang Wang, E. Olevsky, J. Ma, 2005 .

Substitutions of zinc in mesoporous silicate-based glasses and their physicochemical and biological properties

J. Ma, X. C. Zhao, Baoxu Huang, 2018, Journal of Non-Crystalline Solids.

Hierarchically structured anatase nanotubes and membranes

G. Goh, J. Ma, B. Ma, 2009 .

Triblock co-polymer templating synthesis of mesostructured hydroxyapatite

Yufeng Zhao, J. Ma, 2005 .

Electrophoretic deposition of porous hydroxyapatite scaffold.

K. Peng, J. Ma, C. Wang, 2003, Biomaterials.

Electrical conductivity and mechanical performance of polymer/graphene composites developed by two compounding methods

J. Ma, Q. Meng, S. Araby, 2015 .

Synergistic Effects of Boron-, Sulfur-, and Phosphorus-Containing Lubricants in Boundary Lubrication of Steel Surfaces

K. Komvopoulos, J. Ma, P. Ryason, 2005 .

In vitro electrochemical evaluation and phase purity of natural hydroxyapatite coating on medical grade 316L stainless steel

M. Bahrololoom, J. Ma, M. Javidi, 2009 .

ADVANCEMENT IN PREPARATION OF HYDROXYAPATITE/BIOGLASS GRADED COATINGS BY ELECTROPHORETIC DEPOSITION

Chuanzhong Chen, D. Wang, J. Ma, 2005 .

Synthesis and hydrothermal treatment of nanostructured hydroxyapatite of controllable sizes

Say Chye Joachim Loo, F. Boey, S. C. Loo, 2008, Journal of materials science. Materials in medicine.

Effect of MgO addition on the crystallization and in vitro bioactivity of glass ceramics in the CaO–MgO–SiO2–P2O5 system

Chuanzhong Chen, X. Shao, J. Ma, 2012 .

Synthesis, characterization and in vitro bioactivity of magnesium-doped sol–gel glass and glass-ceramics

Chuanzhong Chen, D. Wang, J. Ma, 2011 .

Influence of the sintering temperature on the structural feature and bioactivity of sol–gel derived SiO2–CaO–P2O5 bioglass

Meng Xiangwei, Chuanzhong Chen, J. Ma, 2010 .

Effect of magnesia on the degradability and bioactivity of sol-gel derived SiO2-CaO-MgO-P2O5 system glasses.

Chuanzhong Chen, J. Ma, Yang Jiao, 2010, Colloids and surfaces. B, Biointerfaces.

Constitutive modeling of the densification and the grain growth of hydroxyapatite ceramics.

Zeming He, J. Ma, Cong Wang, 2005, Biomaterials.

Preparation and apatite formation on CaO–MgO–P2O5–SiO2 glass film grown by pulsed laser deposition

Chuanzhong Chen, J. Ma, Changzheng Wang, 2013 .

Constitutive modeling of alumina sintering: grain-size effect on dominant densification mechanism

Zeming He, J. Ma, 2005 .

Constitutive modelling of the densification of micron-grain-sized alumina ceramics

Zeming He, J. Ma, 2003 .

Biomimetic processing of bioactive interface on silicon substrates.

J. Loo, J. Ma, P. Lee, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

In situ synthesis of hydroxyapatite coating by laser cladding.

J. Ma, C. Z. Chen, D. Wang, 2008, Colloids and surfaces. B, Biointerfaces.

Microstructure of yttric calcium phosphate bioceramic coatings synthesized by laser cladding

Chuanzhong Chen, D. Wang, J. Ma, 2007 .

Combustion synthesis / densification of an Al 2 O 3 – TiB 2 composite

E. Olevsky, M. Meyers, J. Ma, 2001 .

Corrosion and microstructure of the metal silicide (Mo1−xNbx)5Si3

X. Shao, J. Ma, Q. Ma, 2013 .

Densification of porous bodies in a granular pressure-transmitting medium

E. Olevsky, M. Meyers, J. Ma, 2007 .

Synthesis and formation mechanisms of nanocomposite WC–MgO powders by high-energy reactive milling

J. Ma, S. G. Zhu, Cao Wu, 2009 .

Effect of magnesia on structure, degradability and in vitro bioactivity of CaO–MgO–P2O5–SiO2 system ceramics

Chuanzhong Chen, J. Ma, D. Wang, 2011 .

Preparation and characterization of novel β-CaSiO3–Ca2ZnSi2O7 bioceramics with adjustable degradability and apatite-formation ability

J. Ma, X. C. Zhao, Baoxu Huang, 2019, Materials Letters.

Pulsed laser deposition of magnesium-containing bioactive glass film on porous Ti–6Al–4V substrate pretreated by micro-arc oxidation

Chuanzhong Chen, J. Ma, C. Wang, 2016 .

In vitro degradation and apatite formation of magnesium and zinc incorporated calcium silicate prepared by sol-gel method

J. Ma, X. C. Zhao, C. Z. Chen, 2020 .

Microstructure evolution of sol–gel HA films

Chuanzhong Chen, J. Ma, D. Wang, 2011 .

Master sintering curve of nanocomposite WC-MgO powder compacts

J. Ma, S. G. Zhu, C. Ouyang, 2012 .

Direct solid-state synthesis of tungsten carbide nanoparticles from mechanically activated tungsten oxide and graphite

J. Ma, Shigen Zhu, 2010 .

Characterization Of Some Methods Of Preparation For Bioactive Glass Coating On Implants

Chuanzhong Chen, J. Ma, Liang Yao, 2006 .

Laser surface melting of electro-metallurgic WC/steel composites

J. Ma, M. Huang, N. Liu, 2008 .

Synthesis of nanosized WC/MgO powders by high energy ball milling and analysis of reaction thermodynamics

J. Ma, S. G. Zhu, C. Wu, 2010 .

EFFECTS OF TECHNICAL PARAMETERS ON THE PULSED LASER DEPOSITED FERROELECTRIC FILMS

Chuanzhong Chen, D. Wang, J. Ma, 2006 .

Nanoscale in situ study of ZDDP tribofilm growth at aluminum-based interfaces using atomic force microscopy

J. Ma, R. Carpick, I. Lahouij, 2020 .

An In Situ Method for Simultaneous Friction Measurements and Imaging of Interfacial Tribochemical Film Growth in Lubricated Contacts

J. Ma, R. Carpick, N. Gosvami, 2018, Tribology Letters.

APPLICATIONS OF ELECTROPHORETIC DEPOSITION IN THE COATING AND POROUS MATERIALS FABRICATIONS

Chuanzhong Chen, D. Wang, J. Ma, 2006 .

HSP STUDY ON THE DISPERSION AND INTERFACIAL ADHESION OF FUNCTIONALIZED SWNTS IN EPOXY COMPOSITES

J. Ma, R. M. Larsen, 2012 .

Sequential deposition and electroforming of metal–ceramic composites for thermal management applications

E. Olevsky, J. Ma, M. Stern, 2007 .

In situ SAXRD study of sol-gel induced well-ordered mesoporous bioglasses for drug delivery.

F. Boey, J. Ma, Y. F. Zhao, 2008, Journal of biomedical materials research. Part A.

Co-synthesis and drug delivery properties of mesoporous hydroxyapatite-silica composites.

J. Ma, Y. F. Zhao, S. Loo, 2009, Journal of nanoscience and nanotechnology.

Preparation and characterization of translucent PLZT8/65/35 ceramics from nano-sized powders produced by a high-energy ball-milling process

Jimei Ma, L. Kong, Weiguang Zhu, 2001 .

PREDICTION OF MECHANICAL PROPERTIES OF CARBON NANOTUBE/POLYVINYLIDENE FLUORIDE COMPOSITES BY HANSEN SOLUBILITY PARAMETERS METHOD

J. Ma, R. M. Larsen, 2011 .