Tetsuo Yamada

发表

CDMF-RELSUS concept: reliable products are sustainable products – influences on product design, manufacturing and use phase

Stefan Bracke, Masato Inoue, Jens Michalski, 2013 .

Adaptability evaluation of a product upgradability (Application of a laptop computer design)

Masato Inoue, Tetsuo Yamada, Chise Shibata, 2017 .

Process integration concept for waste reduction among manufacturing planning, modularization and validation

Stefan Bracke, Masato Inoue, Yuki Kinoshita, 2018 .

Disassembly Reuse Part Selection for Recovery Rate and Cost with Lifetime Analysis

Stefan Bracke, Masato Inoue, Yuki Kinoshita, 2018, Int. J. Autom. Technol..

PLM education in production design and engineering by e-Learning

Tetsuo Yamada, Munenori Kakehi, Ichie Watanabe, 2009 .

Toward One Giga Frames per Second — Evolution of in Situ Storage Image Sensors

Edoardo Charbon, Tetsuo Yamada, Takeharu G. Etoh, 2013, Sensors.

The impact of Brexit on designing a material-based global supply chain network for Asian manufacturers

Kim Hua Tan, Tetsuo Yamada, Kengo Nakamura, 2019 .

Key issues on implementing cooperative mobile robot technologies for port automation tasks

Ljubo Vlacic, Aiguo Ming, Masayuki Matsui, 2005 .

Disassembly system modeling and design with parts selection for cost, recycling and CO2 saving rates using multi criteria optimization

Masato Inoue, Surendra M. Gupta, Norihiro Itsubo, 2016 .

Design Method for Upgradable Product Architecture for Multi-Generational Usage

Masato Inoue, Shogo Miyajima, Tetsuo Yamada, 2018 .

Industrial Statistics Revisited: From Footnotes to Meta-Information Management

Karl Anton Froeschl, Tetsuo Yamada, Roman Kudrna, 2016 .

A Design Problem of Assembly Line Systems using Genetic Algorithm under the BTO Environment

Masayuki Matsui, Tetsuo Yamada, Kazuaki Abe, 2004 .

Queueing Modeling of Material Sorting Disassembly System with Overflows

Tetsuo Yamada, Rizka Aisha Rahmi Hariadi, Shota Tsuchiya, 2013, MIM.

3107 An Upgrade Product Design Method for Reduction of Environmental Loads in Production Phase

Masato Inoue, Tetsuo Yamada, Shuho Yamada, 2014 .

CDMF-RELSUS Concept: Reliable and Sustainable Products–influences on Design, Manufacturing, Layout Integration and Use Phase

Stefan Bracke, Tetsuo Yamada, Berna Haktanirlar Ulutas, 2014 .

1214 An Upgradeable Product Design Method for Satisfying Manufacturer's Yieldability and Environmental Activity : Case Study of a Leased Laptop Computer

Masato Inoue, Katsuyuki Nakano, Jun Nakagawa, 2015 .

Analysis of Material Based GHG Emissions and Costs for Assembly Products Using Asian Lifecycle Inventory Databases: Cell Phone Case Study

Masato Inoue, Yuki Kinoshita, Norihiro Itsubo, 2017 .

A Dual Pixel CMOS CCD Image Sensor

Jun Hasegawa, Jin Murayama, Tetsuo Yamada, 1999, PICS.

Upgradable Design for Sustainable Manufacturer Performance and Profitability and Reduction of Environmental Load

Stefan Bracke, Masato Inoue, Tetsuo Yamada, 2016, Int. J. Autom. Technol..

Modeling and Analysis of Sorting Traffic and Buffer Capacities for Disassembly Systems with Reverse Blocking

Tetsuo Yamada, Yusuke Kume, 2015 .

Study of Disassembly Parts Selection considering Reuse

Masato Inoue, Yuki Kinoshita, Shota Hasegawa, 2017 .

Global Supply Chain Network Design for Lower Material-based CO2 Emissions and Costs between Developed and Emerging Countries

Masato Inoue, Norihiro Itsubo, Tetsuo Yamada, 2016 .

Proposal of Lifecycle Option Adaptability Evaluation Method for Multi-Generational Product Components: (Comprehensive Evaluation from Perspectives of Customer Demand, Production Cost and Environmental Load, and Physical Lifetime)

Masato Inoue, Tetsuo Yamada, Chise Shibata, 2017 .

Mathematical Modeling of Multi-player Multi-objective Decision Making by Linear Physical Programming

Masato Inoue, Tomoaki Yatsuka, Aya Ishigaki, 2018, 2018 7th International Congress on Advanced Applied Informatics (IIAI-AAI).

Strategic selection of assembly systems under viable demands

Masayuki Matsui, Tetsuo Yamada, Kakefuda Satomi, 2006 .

Modeling and Analysis of a Closed-Loop Supply Chain in Consideration of Extra Demand

Surendra M. Gupta, Aya Ishigaki, Tetsuo Yamada, 2018, Int. J. Autom. Technol..

An Upgradable Product Design Method for Improving Performance, CO2 Savings, and Production Cost Reduction: Vacuum Cleaner Case Study

Stefan Bracke, Masato Inoue, Tetsuo Yamada, 2014 .

Control Method of Effect of Robust Optimization in Multi-Player Multi-Objective Decision-Making

Masato Inoue, Tomoaki Yatsuka, Aya Ishigaki, 2019, American Journal of Operations Research.

Analysis of cost effectiveness by material type for CO 2 saving and recycling rates in disassembly parts selection using goal programming

Masato Inoue, Surendra M. Gupta, Aya Ishigaki, 2018 .

Super-dynamic-range image processing system using a new structure CCD

Kaoru Adachi, Tetsuo Yamada, Kazuhiko Takemura, 2004, IS&T/SPIE Electronic Imaging.

Development of a Decision Support System for Selecting Transportation Mode Considering CO_2 Emissions(Theory and Methodology)

Tetsuo Yamada, Tadayuki Masui, Hiroyuki Ogawa, 2011 .

A management design approach to assembly line systems

Masayuki Matsui, Tetsuo Yamada, Tetsuo Yamada, 2003 .

CLASS DEVELOPMENT OF MANAGEMENT INFORMATION SYSTEM USING SYSTEM OPERATION E-LEARNING BY COMPIERE ERP

Tetsuo Yamada, Munenori Kakehi, Fengling Xu, 2017 .

Challenge for improving image quality of a digital still camera

Kazuya Oda, Tetsuo Yamada, Kazuhiko Takemura, 2003, IS&T/SPIE Electronic Imaging.

Conformational transitions of cyclic D,L‐peptides

Hajime Okamoto, Tetsuo Yamada, Hiroyuki Takagi, 2009, J. Comput. Chem..

A management design approach to a simple flexible assembly system

Masayuki Matsui, Tetsuo Yamada, Nobuaki Nakase, 2002 .

Optimal Disassembly System Design with Environmental and Economic Parts Selection for CO2 Saving Rate and Recycling Cost

Masato Inoue, Norihiro Itsubo, Tetsuo Yamada, 2014 .

Environmentally Friendly and Economical Disassembly Parts Selection for Material Recycling by Goal Programming

Surendra M. Gupta, Yuki Kinoshita, Tetsuo Yamada, 2019, Responsible Manufacturing.

Development of New Structure CCD for Digital Still Camera

Tetsuo Yamada, Masafumi Inuiya, Takeshi Misawa, 1999 .

Design of a Closed-Loop Supply Chain with Stochastic Product Returns

Surendra M. Gupta, Aya Ishigaki, Tetsuo Yamada, 2017, Int. J. Autom. Technol..

2-A-1 CONCEPT OF MANAGEMENT SCHEDULER AND A SOFTWARE DEVELOPMENT :

Masayuki Matsui, Yasuyuki Nishioka, Tetsuo Yamada, 2002 .

Reliability engineering based on operating data and monitoring systems within technical products : Challenges, requirements and approaches

Stefan Bracke, Masato Inoue, Edoardo Patelli, 2018 .

Proposal of an Indicator for Evaluation of Lifecycle Option Adaptability Considering the Multiple Consumer Segments

Masato Inoue, Tetsuo Yamada, Shuho Yamada, 2018 .

A Design Method for Product Upgradability with Different Customer Demands

Stefan Bracke, Masato Inoue, Tetsuo Yamada, 2014, PLM.

An Upgrade Product Design Method for Satisfying Performance Criteria, Environmental Load, and Cost

Stefan Bracke, Masato Inoue, Tetsuo Yamada, 2014 .

2 - Stage Optimal Design and Analysis for Disassembly System with Environmental and Economic Parts Selection Using the Recyclability Evaluation Method

Masato Inoue, Tetsuo Yamada, Kento Igarashi, 2014 .

Measurement and Analysis Method for “Ikumen” Activities Including Childcare Tasks using a Triaxial Accelerometer

Masato Takanokura, Tetsuo Yamada, Seiko Taki, 2015 .

Upgradable Design for Reduction of Production Cost and CO2 Emission - Case Study of a Laptop Computer

Stefan Bracke, Masato Inoue, Tetsuo Yamada, 2015 .

Decision Making within the Conceptual Design Phase of Eco-Friendly Products☆

Stefan Bracke, Masato Inoue, Yuki Kinoshita, 2017 .

2-Stage Design Method for Assembly Line Systems with Stoppers

Masayuki Matsui, Tetsuo Yamada, 2001 .

Global supply chain network design and Asian analysis with material-based carbon emissions and tax

Masato Inoue, Norihiro Itsubo, Tetsuo Yamada, 2017, Comput. Ind. Eng..

Disassembly parts selection and analysis for recycling rate and cost by goal programming

Masato Inoue, Surendra M. Gupta, Aya Ishigaki, 2016 .

Effect of Material Prices for Global Supply Chain Network with Trans-Pacific Partnership

Masato Inoue, Aya Ishigaki, Tetsuo Yamada, 2017, 2017 6th IIAI International Congress on Advanced Applied Informatics (IIAI-AAI).

Linear Physical Programming Oriented Approach of Reverse Supply Chain Network Design for Costs and Recycling Rate

Masato Inoue, Aya Ishigaki, Yuki Kinoshita, 2017, 2017 6th IIAI International Congress on Advanced Applied Informatics (IIAI-AAI).

Disassembly System Design with Environmental and Economic Parts Selection using the Recyclability Evaluation Method

Masato Inoue, Tetsuo Yamada, Kento Igarashi, 2013 .

Analysis of Environmental and Economic Disassembly Parts Selection by Goal Programming

Masato Inoue, Surendra M. Gupta, Aya Ishigaki, 2016 .

Combined Two-dimensional Non-renewable Warranty Policy Analysis for Remanufactured Products☆

Ammar Y. Alqahtani, Surendra M. Gupta, Tetsuo Yamada, 2017 .

Adaptability Evaluation of a Product Upgradability: -Application of a Laptop Computer Design-@@@―ノートパソコンの設計問題への適用―

Masato Inoue, Tetsuo Yamada, Chise Shibata, 2016 .

Comparison between Different Products by Disassembly System Design with Parts Selection for Cost, Recycling and CO2 Saving Rates Using Multi-objective Optimization

Masato Inoue, Norihiro Itsubo, Tetsuo Yamada, 2018, 2018 7th International Congress on Advanced Applied Informatics (IIAI-AAI).

Comparison of Sensor-Embedded Closed-Loop Supply Chain Systems with Regular Systems

Surendra M. Gupta, Mehmet Talha Dulman, Tetsuo Yamada, 2021 .

Disassembly system design and analysis with environmental and economic parts selection using life cycle inventory database by input-output tables

Masato Inoue, Yuki Kinoshita, Norihiro Itsubo, 2021, International Journal of Sustainable Manufacturing.

Bi-objective Problem of Material-based GreenHouse Gas Emission and Costs by Global Supply Chain Network Disruption across TPP countries during COVID-19

Keisuke Nagasawa, Tetsuo Yamada, Hiromasa Ijuin, 2021, 2021 IEEE 12th International Workshop on Computational Intelligence and Applications (IWCIA).

Concept of Sustainable Design Methods on Environmental and Economical Disassembly Systems

Tetsuo Yamada, Kento Igarashi, 2021, The Proceedings of Manufacturing Systems Division Conference.

Multi Criteria Simulation Model for Lead Times, Costs and CO2 Emissions in a Low-carbon Supply Chain Network☆

Masato Inoue, Norihiro Itsubo, Tetsuo Yamada, 2015 .

A performance evaluation of disassembly systems with reverse blocking

Masayuki Matsui, Tetsuo Yamada, Tetsuo Yamada, 2009, Comput. Ind. Eng..

Selection of Supplier for End-of-Life Products based on the Optimum Profit, Quality Level, Material Sales Revenue and Disposal Weight

Surendra M. Gupta, Aditi D. Joshi, Tetsuo Yamada, 2014 .

Material Based Low-Carbon and Economic Supplier Selection with Estimation of GHG Emissions and Affordable Cost Increment for Parts Production among Multiple Asian Countries

Masato Inoue, Norihiro Itsubo, Tetsuo Yamada, 2016 .

Collaboration Strategy for a Decentralized Supply Chain Using Linear Physical Programming

Masato Inoue, Surendra M. Gupta, Tomoaki Yatsuka, 2020, Int. J. Autom. Technol..

Remanufacturing Option Selection with Disassembly for Recovery Rate and Profit

Masato Inoue, Yuki Kinoshita, Tetsuo Yamada, 2020, Int. J. Autom. Technol..

PLM Education in Production Design and Production Engineering by e-Learning

Tetsuo Yamada, Munenori Kakehi, Ichie Watanabe, 2007 .

Modeling and Balancing for Costs and CO2 Emissions in Global Supply Chain Network among Asian Countries

Masato Inoue, Norihiro Itsubo, Tetsuo Yamada, 2015 .

Material Based Low-Carbon and Economic Supplier Selection with Estimation of CO2 Emissions and Cost Using Life Cycle Inventory Database

Masato Inoue, Norihiro Itsubo, Tetsuo Yamada, 2014 .

Pricing Decision Models for Remanufactured Short-Life Cycle Technology Products with Generation Consideration

Surendra M. Gupta, Liangchuan Zhou, Yuki Kinoshita, 2017 .