N. Fréty

发表

Towards thermoelectric nanostructured energy harvester for wearable applications

E. Koukharenko, N. Frety, N. White, 2018, Journal of Materials Science: Materials in Electronics.

Oxidation of a Silicon Nitride-Titanium Nitride Composite: Microstructural Investigations and Phenomenological Modeling

F. Deschaux-Beaume, N. Fréty, T. Cutard, 2004 .

Optimization of the electrodeposition process of high-performance bismuth antimony telluride compounds for thermoelectric applications.

S. Beeby, N. White, Xiaohong Li, 2010, Langmuir : the ACS journal of surfaces and colloids.

Influence of the concentration and nature of carbon nanotubes on the mechanical properties of AA5083 aluminium alloy matrix composites

N. Fréty, E. Anglaret, J. Stein, 2014 .

Mechanical reinforcement of a high-performance aluminium alloy AA5083 with homogeneously dispersed multi-walled carbon nanotubes

N. Fréty, E. Anglaret, J. Stein, 2012 .

Diffusion barriers for CeFe 4 Sb 12 /Cu thermoelectric devices

D. Ravot, N. Fréty, R. Viennois, 2013 .

Oxidation modelling of a Si3N4–TiN ceramic: Microstructure and kinetic laws

C. Colin, F. Deschaux-Beaume, N. Fréty, 2007 .

Oxidizing ageing effects on SiC-SiC composites

N. Fréty, M. Boussuge, R. Molins, 1992 .

Study of TaN and TaN-Ta-TaN thin films as diffusion barriers in CeFe4Sb12 skutterudite

N. Fréty, R. Viennois, E. Oliviero, 2019, Journal of Applied Physics.

Investigation of the SHS mechanisms of titanium nitride by in situ time-resolved diffraction and infrared thermography

N. Fréty, F. Bernard, D. Vrel, 2007 .

Effects of the dispersion time on the microstructure and wear resistance of WC/Co-CNTs HVOF sprayed coatings

N. Fréty, Y. Y. Santana, L. Gil, 2014 .

HIGH-PERFORMANCE METAL MATRIX COMPOSITES REINFORCED BY CARBON NANOTUBES

N. Fréty, E. Anglaret, J. Stein, 2011 .

Thermal Stability of TaN-Based Thin Layers for Cu Metallization

J. Sarradin, J. Tedenac, N. Fréty, 2009 .

Copper diffusion into silicon substrates through TaN and Ta/TaN multilayer barriers

J. Sarradin, J. Tedenac, N. Fréty, 2006 .

Ab initio study of the nature and stability of the defects and multi-vacancies in TaN. Comparison with TiN

N. Fréty, R. Viennois, L. Boulat, 2017, Journal of physics. Condensed matter : an Institute of Physics journal.

Thin film deposition of Ta, TaN and Ta/TaN bi-layer on Ti and SS316-LVM substrates by RF sputtering

B. Fraisse, N. Fréty, G. González, 2017 .

Copper diffusion in TaN-based thin layers

B. Fraisse, J. Sarradin, J. Tedenac, 2008 .

Influence of Nanostructuration on the Vibrational, Electronic, and Optical Properties of CrSi2 Thin Films

B. Lenoir, C. Candolfi, N. Fréty, 2020, The Journal of Physical Chemistry C.

Kinetic regimes in the curing process of epoxy-phenol composites

S. Kempa, N. Fréty, F. Brüning, 2018, Thermochimica Acta.

Electrical properties of Bi2−xSbxTe3 materials obtained by ultrarapid quenching

E. Koukharenko, J. Tedenac, N. Fréty, 2001 .

Microstructural characterization of ultrarapid quenched bismuth and antimony tellurides alloys

E. Koukharenko, J. Tedenac, N. Fréty, 2001 .

Microstructural study of Bi2Te3 material obtained by ultrarapid quenching process route

E. Koukharenko, J. Tedenac, N. Fréty, 2000 .

Microstructure and Thermoelectric Properties of Thin Foils of Bismuth Telluride Alloys

E. Koukharenko, J. Tedenac, N. Fréty, 1998 .

Isothermal DSC Study of the Curing Kinetics of an Epoxy/Silica Composite for Microelectronics

S. Kempa, N. Fréty, F. Brüning, 2016 .

Electrical and microstructural properties of Bi2−xSbxTe and Bi2−xSbxTe2 foils obtained by the ultrarapid quenching process

J. Tedenac, N. Fréty, V. Shepelevich, 2003 .

Microstructure and crystallisation behaviour of sol-gel derived 1/2SrO1/2BaOAl2O32SiO2 glass-ceramic

M. Lewis, N. Fréty, A. Taylor, 1996 .

Microstructural and mechanical characterization of titanium nitride produced by S.H.S.

N. Fréty, C. Merlet, R. Marin-Ayral, 2006 .

Microstructural study of titanium carbonitride produced by combustion synthesis

N. Fréty, F. Bernard, D. Vrel, 2007 .

Towards a nanostructured thermoelectric generator using ion-track lithography

C. Trautmann, E. Koukharenko, I. Nandhakumar, 2008 .

Relationship between high-temperature development of fibre-matrix interfaces and the mechanical behaviour of SiCSiC composites

N. Fréty, M. Boussuge, 1990 .

A Phenomenological Model for High Temperature Oxidation of Si3N4-TiN Composites

C. Colin, C. Colin, F. Deschaux-Beaume, 2001 .

Oxidation modeling of a Si3N4-TiN composite: Comparison between experiment and kinetic models

C. Colin, F. Deschaux-Beaume, N. Fréty, 2009 .

Diffusion bonding of Si3N4-TiN composite with nickel-based interlayers

C. Colin, F. Deschaux-Beaume, N. Fréty, 2003 .

Improvements of the Epoxy–Copper Adhesion for Microelectronic Applications

S. Kempa, N. Fréty, F. Brüning, 2019, ACS Applied Electronic Materials.

In Situ Vibrational Probes of Epoxy Gelation.

S. Kempa, N. Fréty, F. Brüning, 2019, ACS macro letters.

Effects of processing parameters on the properties of tantalum nitride thin films deposited by reactive sputtering

J. Sarradin, J. Tedenac, N. Fréty, 2008 .

Ion implantation effects on the microstructure, electrical resistivity and thermal conductivity of amorphous CrSi2 thin films

N. Fréty, M. Timm, P. Fichtner, 2022, Journal of Materials Science.

Performance of Surface Plasmon Resonance Sensors Using Copper/Copper Oxide Films: Influence of Thicknesses and Optical Properties

D. Barchiesi, N. Fréty, E. Anglaret, 2022, Photonics.

Thermoelectric properties of Bi2Te3 material obtained by the ultrarapid quenching process route

E. Koukharenko, J. Tedenac, N. Fréty, 2000 .

Failure prediction for ceramic dies in the hot-forging process using FEM simulation

Fabrice Schmidt, Jean-Claude Boyer, Frédéric Deschaux-Beaume, 1998 .